Does B2B updates AQs for transport failures ?

Lets consider this use case,
When B2B receives an inbound message from TP, I understand that it sends transport level ACK back to TP.
My questions here are
1. How many tries it will have
2. Lets say even after maximum no.of re-trials ,it could not send transport ACK back to TP, what it will do now ? will it update this error in IP_IN_QUEUE ?

It depends on the specific exchange protocol. Configurable through retry count and Interval.

Similar Messages

  • LR3.2 Filmstrip does not update correctly for new imported images

    Installed 3.2 last week and today I did my first import.
    I downloaded from camera into a subfolder my photo folder as usually and then run synchronize on the photo folder in order for the images to appear in LR.
    After that everything looks as it used to but...
    However, when I scroll the filmstrip new thumbnails that enters into view does not have images, they are just grey.
    If i stop scrolling they vill update and show the images.
    It's however totally annoying because I can forget about scrolling to the images i want to take a look at because I don't know where they are.
    I have to guess and wait for the update.
    If I go back to images that I looked at before then the thumbnails are still there so once they been updated they stays so.

    So far I have made no changes to import settings and today I made two new imports.
    The first from card reader into my import folder.
    Then I selected my import folder in LR3,2 and run synchronize and all worked fine as it allways has done before.
    The second batch, captured using tethered capture onto my laptop, then transferred to an USB drive and then finally transferred to my import folder on my main computer.
    Then i run syncronize again
    This time I did not get the thumbnails as in my problem description.
    So something differ.
    Could it be that when the images was captured using tethered capture and the thumbnail was created etc on the laptop.
    It also put some metadata into the raw file that makes LR3 belive that a thumbnail already has been created for the file or something like that.
    Could that bee the reason to my problem?

  • Update Serviceplan for tenant failure

    I have a Exchange server 2010 SP1 hosted server running and getting the following failure when updating the service plan for a tenant
    Organization is already in transition from service plan HostingAllFeatures_2GB to HostingAllFeatures_2-4-8GB, while current task would transition it to serviceplan HostingAllFeatures_2GB. Please finish the transition in progress first.
    How can i finish the transition?
    I did already Complete-OrganizationUpgrade
    Tnx...

    Hi All,
    Issue is easy to solve,
    EMS --> Get-Organization -Identity ORGANISATIONNAME | fl
    Now you getting all of the information of the Hosted Organisation
    there are 3 importants ID's (ServicePlan, IsUpdatingServicePlan, TargetServicePlan)
    If the "IsUpdatingServicePlan" is true then the organisation is still waiting for the upgrade, and you'll get the error message.
    Now is time to put the TargetServicePlan back to the ServicePlan.
    Update-ServicePlan -Identity ORGANISATIONNAME -OfferId 2 -ProgramId YOURPGRAMID
    After you finished updating the serviceplan to the targetserviceplan you are able to activate the serviceplan you wants to activate. And starting a organisation upgrade. :-)
    I had some picture's in this thread but i'm not allowed to post them :(
    Regards,
    Thomas

  • Doing a Roll Back for Transport Request

    Hi,
         I have a situation where I wanted to bring all of my objects (IDoc Type, Message Type etc...) under single request but when I did that, I am unable to test my Inbound Function Module (Custom). It gives me an error saying "Interface for this function module is incorrect". But before changing the transport request, everything was working fine.
       So, can somebody tell me how to roll back the changes done in Transport Organizer?
    Thanks,
    Venkat.

    * dschaldenovell,
    it's just a service pack, so you could manually downgrade the RPMs and that's it. But to be honest, I wouldn't expect any problems, and if, Novell support should be able to resolve them quickly.
    Uwe
    Novell Knowledge Partner (NKP)
    Please don't send me support related e-mail unless I ask you to do so.

  • HT4623 Why does the update ask for a pass code? Previous updates did not.  Why does it NOT accept the only PIN I have set on this computer? Thanks.

    What the heck is a "pass code" and why am I being asked for one??  And where would I find said pass code?  I've not had to do that for prior updates, so am more than a bit confuzzed.  Thanks.

    The Passcode is the 4 digit code you use to unlock your iPad.

  • How to capture the change in the update mode (for Inventory) in a transport

    Hi all,
    I recently changed the update mode for Inventory Controlling  from Unserialized V3 Update to Queued delta in R/3 DEV environment. When I was doing the change it did not prompt for a transport request. Now I have to somehow capture this in a transport and move it to R/3 Quality environment. How do I capture this change in a transport.
    Thanks in advance,
    Ram Kumar.

    there are 2 options
    1) try changing back and forth and see if it prompts for a request
    2) Create a customizing request and add the following entry into the request
    Program ID - R3TR; Object type - TABU; Object name -  TMCEXUPD
    and make the entry ...How ?? Click on the key that you see under the column 'Function'
    client/application component.. if client is 100 and application component is 11
    then the table entry should be 10011
    Assign points if it helps
    P.S:if you check the table TMCEXUPD shows you the update mode
    Edited by: KK on May 28, 2008 1:52 PM

  • Why can't I update or load new apps on my iPhone and iPad. It does not ask me for my password. I tried to sync from my laptop now I am unable to connect to any sites from internet explorer. When I try to update or load any app it tells me it is corrupt

    Why can't I update or load new apps on my iPhone and iPad. It does not ask me for my password. I tried to sync from my laptop now I am unable to connect to any sites from internet explorer. When I try to update or load any app it tells me it is corrupt

    You need to ask Apple for assistance with getting back into your old ID. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to resolve this issue through the Account Security team, fill out and submit this form.
    (118441)

  • My firefox beta 12 using Linux platform does not update to firefox RC1 via the "check for update" function. I know windows' beta version had this fixed, when would Linux get similar support ?

    Current platform : Linux
    Current firefox version : Firefox 4 beta 12
    Issue : does not update to RC 1 using the check for update feature.
    Background : previously downloaded beta 8 and then it automatically updated to beta 12 using update features but for RC1, it does not.
    I know users under Windows platform had same problem but was resolved and they can now update via check for update feature.
    Please implement for Linux users too.
    Thanks !!

    If you can't update then you can download and install the full Firefox 4 RC version.
    * http://www.mozilla.com/firefox/all-beta.html

  • Batch Split in OBD & billed for the entire Quantity .RG1  register does not update the excise values

    Hi All,
    I am new here . We have batch split in Delivery and 601 happens for the individual batches and billing we bill for the entire quantity . Hence the RG1 does not update the excise values for the batches and it is showing as zero (upon extraction in J2I6). Upon research through the program the latest note which i presume is patched
    The latest note is N158234 which does not show in the program but seems have been patched considering we are using the Latest version of SAP .
    As you see above in the billing we have billed for the whole quantity but RG1 does not update for the since the batches are zero .
    My programmer says because of some note related to cancellation where it says about values H & J in vbfa table and due to which program does not go through the Note for the batch split .
    Now i have checked few other projects in my company and they all seems to be following the program . So i am wondering whether my process or some customization is missing .
    Sales order (no batch determination)  , in delivery the batches are picked through wm to and batch split happens in the delivery . Then billling for the whole quantity . We have automatic excise invoice creation enabled so no J1IIN .
    Can somebody help me .
    Thank you

    My programmer says because of some note related to cancellation where it says about values H & J in vbfa table and due to which program does not go through the Note for the batch split
    Which field (H & J) they were referring in VBFA ?
    i have checked few other projects in my company and they all seems to be following the program
    How about the other projects' values in VBFA where your techinical team is guessing some issue.  Have you compared this?
    Since you have already the note 158234 implemented in your system, ideally, you should not face any issue.
    G. Lakshmipathi

  • IOS 7 doesn't work on iPod touch 4g, so does the mean its the end for this device? Or are they going to make updates specially for lower devices an apps that are compatible ??

    iOS 7 doesn't work on iPod touch 4g, so does the mean its the end for this device? Or are they going to make updates specially for lower devices an apps that are compatible ??

    Which apps remain compatible will be up to the individual developers who sell those apps. There will be no further iOS updates, but those aren't really necessary to continue to use and enjoy your device. I still have an iPad 1 running on iOS 5, and it is fully functional.
    The App Store has an app called VintApps 3.1.1 that is specifically geared toward iOS 3.1, however, you would probably be able to run most of those apps on your iPod, and considering that there will be a rather large market for iOS 6 apps users, it is not likely that you will see a significant reduction in choices any time soon.
    It is not the end for the device in any sense except that it is at it's ultimate iOS level. And again, I have an iPad that is at it's ultimate iOS level (iOS 5), and I get new apps all the time that work for both my iPad and my iPhone that runs iOS 6.1.1
    No need to fret....
    Cheers,
    GB

  • Unable to update, when executed table gets lock and Execution does not stop even for an hour.

    Following is my Query, which unables to update. When Executed, table gets lock and Execution does not stop even for an hour.
    update Employees 
          set Status = 'Close'
          where statusid IN (select statusid 
                                             from MyView 
                                              where DownloadedDate ='2014-07-27 00:00:00.000'
    here Employee contains 3,00,000 of records and Subquery return 1,50,000 Empid 
    i tried in various ways but not able to solve, statusid  column have no index on,  i tried using cursor but it does not work.
    plz let me know how to solve this Issue, Its very Important to get solve as all my further work depends on Updation
    , THANKS IN ADVANCE.

    See also your other thread with the same question:
    http://social.msdn.microsoft.com/Forums/en-US/80243625-fc3b-4ee1-bce1-4adcdbc16c14/unable-to-update-when-executed-table-gets-lock-execution-does-not-stop-execution-even-for-an-hour?forum=sqlserversamples
    Olaf Helper
    [ Blog] [ Xing] [ MVP]

  • After doing an update for my iphone 4 I lost most of my new purchased music on Itunes, can I restore it? I have my apps...

    After doing an update for my iphone 4, most of my new purhcased music has been deleted off Itunes, I have my apps back, but the music has disappeared, can I restore it and get it back so I can transfer it back to my iphone?

    http://support.apple.com/kb/ht2519

  • HT1338 The latest update for Mountain Lion OS X 10.8.3 keeps asking for Restart, but does not update.

    The latest update for Mountain Lion OS X 10.8.3 does not update.  Keeps asking for Restart but no update.

    Yup, I'm experiencing the exact same thing. 
    I (and many others) are experiencing the same or similar issues with the 10.8.3 update.
    I've sent an response to Apple but have not yet received anything back (yet). 

  • "Arrange new window" (thumbnail window for digital painting) does not update

    Hi,
    I have an issue with Photoshop CC V2014.2.1 release where if I open a new document, then create a duplicate window of that document (Window->Arrange->New window for "Document.psd") if I am working on the original window, the duplicate window does not update any brush strokes until I select the duplicate window or perform an undo command.
    On previous versions (CS4 & CS5) the 2nd window would update each brush stroke automatically.
    I have looked for options to auto-update the 2nd window, but can't find anything. Is this a bug or am I missing an option?
    Thanks,
    Tim

    Well there is feedback http://www.apple.com/feedback/itunesapp.html and if you have an AppleID there is a "bug reporter" http://bugreporter.apple.com/.

  • I have a G5 and bought and upgraded to osx 10.5.  now i need to upgrade to 10.5.6 or higher, but when i download and try to install, i get message "this volume does not meet requirements for this update".

    i am trying to sync an ipad to a power mac g5.  i bought and upgraded to osx 10.5 and have tried to download and 10.5.6 or higher, but i keep getting same message:  "you cannot install mac os x update on this volume.  this volume does not meet requirements for this update".  help!

    Mac OS X 10.5.8 Combo Update
    Java for Mac OS X 10.5 Update 5
    To me, in all such updates, goes without saying maybe: backup, repair permissions, repair your drive (Disk Warrior does more reliable and thorough job, and it comes out to pennies if you don't wait until needed). Clone your system so you can restore or use the backup - just in case.
    I'd even do a fresh format after your clone is done and do a full OS clean install and update, and then a quick import from Setup Assistant.
    Mac computer with USB 2.0 port
    Mac OS X v10.5.8 or later
    iTunes 10.2 or later recommended
    (free download from www.itunes.com/download)
    iTunes Store account
    Internet access
    I'm going to assume there is something with the partitions on the drive, partition table most likely, though I know I've seen others with that error message - doesn't really point to cause, rarely does (make sure latest firmware update etc is sometimes included but again, we know that isn't why).

Maybe you are looking for