Does BPIM configuration require any licensing ?

Dear All,
We are involving system study of Business process interface monitoring (BPIM) in our landscape and BPA also,Our Interfaces are from systems ECC, PI, even some of the Legacy etc. In this kind of setup of BPIM, does any licensing is involved?
any addition cost is required?
Please provide the details.
Thanks,
Jansi

Jansi,
as far as I know there is no licensing involved, if you have a variety of interfaces as long as they are documented in Solar01/02 you should be fine. Just have a structure in place at some place so that you can scope the function easily.
That is my take on it.
Cheers!.

Similar Messages

Router required any license bundle for handling voip trafic

i have a cisco c2951 how do i check the voice capability ? does it required any license to handle voip traffic

Hi,
You need to install the UC license for the voice support. When you issue the Show version command on the router, it will show you all the installed and active licenses on your device:
Technology Package License Information for Module:'c2900'
Technology    Technology-package           Technology-package
                        Current       Type                Next reboot
ipbase        ipbasek9      Permanent         ipbasek9
security      securityk9    Permanent         securityk9
uc               None              None               None
data           None            None                None
In My case I do not have the UC license Activated. You need to first have the license installed in order to activate it.
There are two ways of getting the license. One is by purchasing the license from Cisco and the other is by requesting for a free 60 day trial license. Once you have the license with you.. copy the license file to the flash of the router and then key in the command
2951#license install flash0:FHH1216P07R_20090528163510702.lic
The following link gives you more information:
http://www.cisco.com/c/en/us/products/collateral/cloud-systems-management/software-activation-on-integrated-services-routers-isr/white_paper_c11_556985.html
Thanks,

JRC (Crystal Report Viewer 11.**.**) Requires any license

Dear All,
We am using Crystal report 10 and JRC (Crystal Report Viewer 11.*.*) . we have license for crystal report 10 but no license for JRC 11. I downloaded JRC JARS from internet, so do we require License for JRC to use in the Production Enviornment.. If so can i get license for JRC 11 alone.
What about Crystal report for Eclipse2.0 (CR4E2.0). Does this also requires license to use in the production enviornment.
Please reply me as soon as possible.
Thanks in advance

You will need to have a look at the [Crystal Reports Developer Advantage License|http://www.sap.com/solutions/sapbusinessobjects/sme/reporting-dashboarding/reporting/developeradvantage/index.epx].
I think that will answer most of your questions.
Darren

Does anyone know of any licensing issues with various Adobe shapes?

I want to use one of the Adobe shapes available in the shape palette ( paw print) for a commercial product, printing it as part of a decorative design on a product. Has anyone heard of any licensing issues with these custom shapes?

Never heard of any issues, and I’d be stunned speechless (if you know me, that means very stunned) if there were an issue. They are provided with the program to add value and allow you to create artwork, much of which is expected to be commercial. Go for it and don’t sweat.

Does Blackberry Classic requires any BES?

Hello!
My company is using Blackberry Enterprise Service at the moment.
we want to stop using this server, due to the upgrade costs, but we would like to remain with blackberry devices and, mainly, to buy new blackberry classic devices.
Is it it mandatory to have the BES to access our e-mails of Microsoft Exchange server through the Blackberry Classic?
Or can it work like any Android and iOS device and access them directly (without the BES)?
All help is appreciated!
Thank you!

You can use Active sync but you can only wipe whole device or get BES 12 whch can remove work side only.
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

Does American Express require any extra coding to work in BC?

last week, we took our client online with their shop and have experienced our first issue with the Registration Buy form. The client received a call from a customer that our form would not take American Express as a card. I checked the form and yes, Amex is listed as a card option. (I did not change that). I did not change the script at the bottom of the page either. The client is using Authorize.net (US only) as the gateway.
Any thoughts? Anybody? Beuller?
www.shoplechameau.com is the site.
Thanks
Chuck

Thanks Liam,
In the interim, we were informed that the site rejected a VISA as well, the client was able to provide an error message and we have narrowed it down to an Authorize.net issue. My boss has submitted a case to BC, but I think he will get the same answer I gave him (and that you have confirmed). Just in case, here is a screen cap of the error message.
I have the client checking their information and looking into an issue I discovered on another site. Here is the gist of it from Authorize.net:
The confusion has to do with the two options, Transaction Server (Live or Test) and Transaction Mode (Live or Test).
From the Authorize.net developer site:
Quote
If you are posting your transaction requests to the gateway URLs https://test.authorize.net/gateway/transact.dll or https://certification.authorize.net/gateway/transact.dll and you are using an account given to you by an Authorize.Net Reseller or from Authorize.Net Sales, you may encounter this error. The gateway URLs mentioned above only work with specific test accounts, available upon request by completing the form at http://developer.authorize.net/testaccount/
Try posting your transaction request to https://secure.authorize.net/gateway/transact.dll instead. If you need to submit a test transaction, you may do so by setting the field x_test_request to "TRUE". You may then remove x_test_request or set it to "FALSE" when you have completed your testing.
Since we can only access the type of server (regular or test) and not the Mode on BC, I am at a standstill.
But thanks anyhow,
Chuck

MGCP FXS ports requires a license in CUCM9

Hello!
I am connecting Some analoge phones to VG350 FXS ports which is configured as a MGCP Gateway in CUCM. I beleive MGCP did not requires any license for it. Can some confirm this ? is there any Cisco doc on it ?
Thanks & Regards,

Hi Sambit,
Technically u are correct but legally I think u would be requiring license.
even the ordering guide says Analog devices are supported with Essential USer license and must be purchased through UCL.
http://www.cisco.com/web/partners/downloads/partner/WWChannels/technology/ipc/downloads/finalcopy.pdf
regds,
aman

"The hostname does not resolve to any configured address..."

I think this is a stupid question But I just can't remember what I'm missing. It's been a while since I set one of these up.
I have just installed Lion and Server on a Mac Mini 2.66GHz C2D
I'm not trying to change the Open Directory settins from Standalone directory to an Open Directory Master.
When I do it saks me to create a directory adminstrator account. No problem. But when I hit continue on that screen I get a message saying:
"The hostname does not resolve to any configured address. Please ensure your hostname and network configuration is correct."
Now, I think this is because I haven't set up any DNS zones yet. But I'm not sure about that...
So can anyone(s) help me with these two things:
1. Is the Open Directory master I'm trying to set up dependent on setting up DNS first?
2. If so, can someone tell me what I'm supposed to do in the DNS, because for the life of me I can't remember anything about it.
I'll be very grateful for any help...
Thanks!
David.

Hi again. Thanks for the help. So that clears up that mystery. However...
Ok, so as already noted, I've completely forgotten how I set this up last time, but I remember that I still have an archive of my old Snow Leopard server before I upgraded it to Lion.
So I've fired that up in Server Admin to see how I set up the DNS in that, and see if that can remind me how to set up the same on my new Lion server.
I believe I've set it all up correctly, but alas, I'm still getting the same error message when I try to create the open directory master. So I must be doing something wrong still. I just wish I knew what that was.
I've attached screen shots of my settings. If you or anyone else can tell me what I'm doing wrong, then again, I'd be grateful!
The routing is done by my Airport Extreme, with the .200 IP address being assigned by DHCP client ID. The IP address of this machine is in fact 10.0.1.200. These settings are exactly the same (with one exception) as my (working) Snow Leopard server and just to be clear I'm not trying to run both servers at once!
The one exception is this: The first line in the screen shot says "1.0.10.in-..." (from the non-working Lion server), whereas on my Snow Leopard server, the same line says "200.1.0.10.in-..." Everything else is the same. I can't seem to see any way of "correcting" that. Is that the cause of the problem? And if so, how do I fix it? If not, what *is* the problem?
Thanks!
David.

Does IC WebClient require a J2EE engine for any of its component

Does IC WebClient requires a J2EE engine for any of its component? What's the need to install j2ee engine on CRM server?
I would appreciate if anybody could give a good answer or any kind of documentation on it.

Prakash,
The answer is yes in terms of the J2EE enginge being required. It primarily handles your multichannel access and broadcast messaging for the call center. If you don't install it, then your IC webclient will not work correctly. We are not using the "telphony" features of the call center, but still installed the java piece so that the standard functionality would work correctly.
Good luck,
Stephen

Are there any apps which will allow local calling using data only that do not require any special numbers called out initially and does not require the receiver to have a similar app or account?

Are there any apps which will allow local calling using data only (not minutes, no extra charge) that do not require any special numbers called out initially and does not require the receiver to have a similar app or account? Just for random local calling.

Yup.
Here is a way you could solve this by adding an extra column and a small lookup table:
The lookup table is here for the copying:
0
1
k
kilo
2
M
mega
3
G
giga
4
T
tera
5
P
peta
6
E
exa
7
Z
zetta
8
Y
yotta
In table 8 (the one on the left in the image) column A is where the values are.
B1=A1÷(1024^VLOOKUP(INT(LOG(A1, 1024)), Binary Prefixes::A:D, 1))&" "&VLOOKUP(INT(LOG(A1, 1024)), Binary Prefixes::A:D, 2)&"B"
this is shorthand for... select cell B1, then type (or copy and paste from here) the formula:
=A1÷(1024^VLOOKUP(INT(LOG(A1, 1024)), Binary Prefixes::A:D, 1))&" "&VLOOKUP(INT(LOG(A1, 1024)), Binary Prefixes::A:D, 2)&"B"
select cell B1, copy,
now select all the cells in column B, paste

Does Oracle Mapviewer / Oracle Maps require a license ?

G'days Guys,
Firstly apologies if this question has been answered before, but I've not been able find anything under Mapviewer or Spatial Forums regarding Oracle Maps / Mapviewer license.
Can anyone confirm if Mapviewer is Free ? I was under the impression that it comes "free" with the OracleAS which itself requires a license however as long as mapviewer was being run under the OC4J container or Tomcat it was Free ?
I've tried looking on the Mapviewer Website but can't find any information regarding it being licensed or free ?
Regards
Mark

Hi, Mark
As I know, Mapviewer is licensed now under Oracle Application Server and Weblogic Server.
If you want to deploy it to third party J2EE container, you still need a license (OAS or Weblogic)
try to search the forums, there was the same question
mapviewer FAQ: http://www.oracle.com/technology/products/mapviewer/htdocs/faq_10133/mapviewer_faq_10133.html
Michael

Is it possible to run Labview ver 6.5 with PowerPC as the target CPU and VxWorks as the target operating system? If Labview ver 6.5 does not support this configuration, do any of the later versions support it?

Is it possible to run Labview version 6.5 with PowerPC as the target CPU and VxWorks as the target operating system?
If version 6.5 does not support this configuration, do any of the later versions support it?
I basically have an Ada executable and Labview executable that currently run on a Sun Machine with Solaris as the operating system. I'm re-architecting the system hardware and will be getting rid of the Sun Machine and Solaris. I'm don't have any issues with the Ada executable, but I'm not sure what configurations Labview supports.

duplicate post
In the future, please don't try to stuff your message in the subject line. Thanks.

Does OC4J standalone require license fee in order to use in production env?

Hi,
Does OC4J standalone require license fee in order to use in production environment?
Please advise.
Thank you.

Yes, you have to buy Oracle Application server in order to run it on a production enviroment.

Does CC 2014 require a new paid subscription or is it an update to an existing license?

Does CC 2014 require a new paid subscription or is it an update to an existing license?

If you are on a current and valid subscription, then it's simply a "free" update.
Mylenium

CTRL+P requires manual tab focus when printing a PDF within FF4. This worked fine in FF3. Why does it not work any more? Thanks!

Hi,
CTRL+P requires manual tab focus when printing a PDF within FF4. This worked fine in FF3 - i.e, you could just select the tab. Why does it not work any more? Thanks!

Hi
https://discussions.apple.com/thread/4325038?tstart=0
CCT

Does BPIM configuration require any licensing ?

Similar Messages

Maybe you are looking for