Does Business Objects XI still support RDC for Crystal Reports?

Post Author: DLO34
CA Forum: Integrated Solutions
My company develops an application which uses Crystal Reports to present data to the user. We have been using the RDC API through our internal C code for a while now. From the documentation I have found on this site I cannot be certain that BO XI will support RDC. I have found documents discussing the new RAS API and how to migrate applications to RAS. Will BO XI still support RDC or will we be required to write to the new RAS API? Any help would be greatly appreciated.

Post Author: ejthunder
CA Forum: Integrated Solutions
Hello,
The RDC is a development tool, so your post is better suited under the Development | Other category in the forums.
The RDC is still supported in CR XI (v11.0) and CR XI R2 (v11.5). The RDC has been depricated, so it's no longer receiving development focus, but it will still be supported for the lifecycle of the products it ships with. No firm retirement date has been given to anyone yet, but it's likely that the RDC will be retired in the next release or two.
The RAS API is a very powerful report design API, however it's not a true replacement for the RDC (unless you're using Report Creation API calls with the RDC now). RAS can be used with the .NET, COM (ASP), and Java SDKs.
Depending on how you actually use the RDC you'll want to consider which SDK you're going to migrate to - .NET, or Java, and then consider which API is appropriate.
I hope this helps.
EJ

Similar Messages

End of support lifecycle for Crystal reports 9.0 and 10.5

Hi,
I am trying to find end of support date for Crystal Reports 9.0 and 10.5. Is there a link where I could find this information?
What are the option available to upgrade? Costs, etc...
Thanks

Hi,
Support for Crystal Reports ver 9 and 10.5 has already ended and as such no longer available in our Service Market Place (SMP - https://service.sap.com/support) Product Availability Matrix.
The latest version is Crystal Report 2008 V1 which has a Maintenance End date of Dec 31, 2015.
For options to upgrade and costs, please call your nearest Customer Interaction Center (CIC) and they should be able to guide you to appropriate team.
CIC's number can be found in SMP > Help & Support tab > Look up Support Center Addresses sub tab.
Hope this helps.

WebElements: Support planned for Crystal Reports for Enterprise?

Hi Jamie
Currently only Crystal Reports 2011 is supported with WebElements 2.47. Is there a plan to support Crystal Reports for Enterprise in the future? Or are there technical obstacles which prohibit this "by design"?
Regards
Raphael

hi Raphael,
crystal reports for enterprise on bi 4.0 will not support webelements as it does not have support for custom functions. webelements is built with custom functions. there are most likely other limitations with crystal reports for enterprise that will disallow using webelements.
this should not really affect anyone that's using webelements unless they really want to use the new semantic layer / universe.
given that you could probably still build your reports that contain webelements with crystal reports 2011 and call anything built with cr for enterprise. the best practise for webelements is to create a container report with all of the webelements controls and then call the target in an iframe or in a new tab or window.
jamie

DB2 support for Crystal Reports for Enterprise And Unx errors

Hi,
I have a requirement to create a report in CrystalReports for Enterprise 4 sourcing data from Oracle 11 and IBM DB2 V9 databases. My first approach is to create relational connections for both the databases in the BO Repository (using Universe designer) and use them directley in the CR for Enterprise. Here I was able to create the two connections but unable to use the DB2 connnection in the report. I get the below error:
"The Database DB2V9 is not supported".
Is DB2 is a supported database for Crystal reports for Enterprise ??
My second approach is to create a multisource universe using IDT. Here when I try to create the Datafoundation layer, I get to see the tables from the DB2 databasae but When I expand the Oracle connection, I get this error: "conversion from UTF8 to charset failed: encoding not loaded".
Im unable to create a multisource universe at all no matter what connections I use.
Here is some additional info:
SAP BI4.1 SP1
Windows 2008 R2 servers
Oracle 11g
IBM DB2 V9.7
Any suggestions please!
Thanks,
Ravinder

Hi,
First of all I would strongly advice you to only use IDT for your universe development. The old Universe Designer is a legacy tool and should not be used unless you are using products that doesn't support IDT universes.
The issue you are facing for your Oracle connection is likely caused by a missing path variable.
Add "C:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\win64_x64" to the PATH environment variables on the SAP Business Objects Enterprise server.
Restart the SIA
NOTE: Modify the path in case the SAP BusinessObjects Enterprise is installed in different folder.
Hope this helps.
Cheers,
Josh

Business Object XI 3.0 Integration for SAP Solutions

Hi all,
       I am new to Business Object XI 3.0 integration for SAP solutions, can anyone please help me with the basics for Business Objects XI 3.0, I will probably be doing an installation of the same at my organization very soon, can anyone please tell me how much time is it going to take for me to complete the installation, what are the prerequisites, what should be the starting step for the same. Any advice as to where am I suppose to be carefull, I would really appreciate the help.
Regards,
Sree.

Hi shree,
As you are going for the new installation of Business Objects Enterprise XI R3 you can find all the prerequisites for the installation like the disk space and all other such requirement in the documents provided in the following link.
You can have the Business Objects documents from the following site.
-     Please go to Http://help.sap.com
- Click on Business Objects tab
- Select the product as Business Objects Enterprise XI 3.0 and it will list all the document under the respective product.
You can find all the prerequisites in the Business Objects Enterprise admin guide. And if you need to have BO and SAP work together in conjunction you need to have the Business Objects Integration Kit for SAP. Integration Kit provides the database drivers and other features for reporting off SAP.
Link to download the useru2019s Guide:
-     Please go to Http://help.sap.com
- Click on BusinessObjects tab
- Select the product as Integration Kit for SAP
User guide: BusinessObjects Integration Kit for SAP Useru2019s Guide.
I hope that helps you.
Regards,
Prashant

Reg:-10901: Database error: [Microsoft][ODBC SQL Server Driver][DBNETLIB]General network error. Check your network documentation.. Contact your Business Objects administrator or database supplier for more information. (Error: WIS 10901)

Hi Friends,
When i schedule the report in infoview ,i am getting this error, could you please let me know how to solve this error.
10901: Database error: [Microsoft][ODBC SQL Server Driver][DBNETLIB]General network error. Check your network documentation.. Contact your Business Objects administrator or database supplier for more information. (Error: WIS 10901)
Thanks
sreedhar

Hi,
I am able to refresh the report in Infoview and data is dispalying , but when i schedule the report in infoview i am getting that error.
I am not clear on below one could you please elaborate on this
You need to create ODBC for SQL server.Check your BO server is able to connect SQL Server.
Thanks
sreedhar

Business objects and start events required for CO11N and CO13 transactions

Hi,
We do production order <b>confirmation</b> and <b>cancellation</b> in CO11N and CO13 respectively. Can somebody please tell me the corresponsing business objects and the start events for them? This is a very urgent issue, I will surely rewad good points.
I guess we need to use AFVC_PM object and "finalconfirmation" event for the confirmation.
Please confirm this and kindly suggest the same for cancellation.
Thanks,
Max

Hi Max,
You will have to use the object BUS2005 - which is for Production order.
If you do not have Required events in the BO, you will have to extend object to add those custom events e.g. Cancellation event.
In this case you wil have to use Status management technique for raising events if standad transaction is not raising them.
Hope following SAP Help link might help you to start off..
http://help.sap.com/saphelp_47x200/helpdata/en/c5/e4aed5453d11d189430000e829fbbd/content.htm
Regards,
Akshay Bhagwat

Waht is the email address to report a refund. I paid monthly subscription for Fring but it does not work and Fring support asked me to report this to Apple support.?

Waht is the email address to report a refund. I paid monthly subscription for Fring but it does not work and Fring support asked me to report this to Apple support? I'm not aable to report this issue to the right people??

For issues with an iTunes Store purchase, email:
http://apple.com/support/itunes/contact/

I searsh support for crystal reports for VS 2005

Post Author: wahid
CA Forum: Crystal Reports
Hello;
I learn crystal rports for VS 2005, for do reporting but i can't, can you send me address web for crystal reports and programming code in crystal reports
think you,

Before dishing out good $$ for a phone support, have you posted your query in these forums? Have you used the search box in the top tight corner to see if there is a solution already documented?
Just sayin...
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

Where is the Tech Support for Crystal Reports

Where is the technical support for Crystal Reports? I have just been through one of the worst technical supports circles in my entire career - this phone# to that phone# and only to be told you cannot talk to a Tech Support person. My dilema for anyone that can help - I am using Crystal Report 2008. I have mapped to a database in MS Access 2002. I copied the database to my desktop and created a test report. I can see the fields in the Field Explorer. I have dragged the fields onto the report and they are visible in Design View. I can see the data in the fields when I browse the fields. In the Preview View I do not see any data what-so-ever. I have not changed any defaults and have not suppressed or hidden information. The $1M question: Why can't I see the data on my report? I never had the problem when I used Crystal Reports v8.

The datasource shows my database. I believe that is what you meant. No data. IT has asked me to ask ? if in the Control Panel DSN if we need some information there. I don't have a clue - I am just a report writer and not an IT person.

SAP Integration Kit for Crystal Reports

Hello,
I read Ingo Hilgefort's blog on BusinessObjects and SAP Part 2.
/people/ingo.hilgefort/blog/2008/02/19/businessobjects-and-sap-part-2
Does the current trial version of crystal reports available from businessobjects.com have this integration kit embedded in it?
If not, where can i find it?
Regards,
Suraj

hi shenoy,
SAP Integration Kit
The SAP integration kit includes drivers to allow connectivity to both R3 and Business Warehouse (BW). In addition, it includes a BW toolbar for Crystal Reports, a specific version of InfoView with Role-based links, sample iViews for Enterprise Portal, and an SDK in Java, COM, or .NET.
Reporting off R3 Data
The kit includes two drivers to allow Crystal Reports to connect to the ABAP data dictionary via a remote function call or RFC.
The Open SQL driver allows the user to connect to SAP R3, displaying the field and the short text description of the tables and fields. The developer can then join the tables accordingly, using the database expert, and then select the relevant fields from which to report. This driver displays not only transparent tables, but includes views, pool tables, cluster tables, ABAP data clusters, and ABAP functions. This driver is geared toward a technical person with functional expertise in joining the tables and then creating the report.
see link
http://safari.oreilly.com/0672329174/ch15lev1sec7#X2ludGVybmFsX1RvYz94bWxpZD0wNjcyMzI5MTc0L3BhcnQwMg==
http://diamond.businessobjects.com/node/18962
SAP Integration Kit
The SAP integration kit includes drivers to allow connectivity to both R3 and Business Warehouse (BW). In addition, it includes a BW toolbar for Crystal Reports, a specific version of InfoView with Role-based links, sample iViews for Enterprise Portal, and an SDK in Java, COM, or .NET.
Reporting off R3 Data
The kit includes two drivers to allow Crystal Reports to connect to the ABAP data dictionary via a remote function call or RFC.
The Open SQL driver allows the user to connect to SAP R3, displaying the field and the short text description of the tables and fields. The developer can then join the tables accordingly, using the database expert, and then select the relevant fields from which to report. This driver displays not only transparent tables, but includes views, pool tables, cluster tables, ABAP data clusters, and ABAP functions. This driver is geared toward a technical person with functional expertise in joining the tables and then creating the report.
Note
In Crystal Reports, you cannot check the SQL generated using the Show SQL Query option from the Database menu. You can check what Open SQL was generated by using SAP transactions.
The InfoSet driver allows the user to connect to an existing InfoSet, as defined by SAP transaction SQ02. Alternatively, you can use an existing ABAP query, as defined by SAP transaction SQ01. The benefit of this driver is that the user does not need to know where the data is stored or how to join the tables. Another advantage is that any prompts defined in the InfoSet become parameters in Crystal Reports.
Note
To test the InfoSet query, run the InfoSet using your SAP GUI and ensure that it is pulling the required data first before testing it in Crystal Reports.
Reporting off BW Data
When reporting off of BW data, the Business Objects' Integration Kit consists of three drivers that are used to pull data.
The BW Query driver enables the user to connect to a BW query. To enable selection of a query with this driver, Crystal Reports has its own toolbar, as shown in Figure 15.3, and the user needs to select the New Report icon from this toolbar. The user then selects the required BW query, and thus displays a listing of fields available in the query. The user can then create the report using any of those fields. Variables defined in the query automatically become Crystal Reports parameters. After the user has finished building the report, the user saves the report using the BW toolbar. This saves the report to BW, and if the user selects the option to do so, automatically publishes the report to Enterprise.
Figure 15.3. Crystal Reports after the SAP integration kit is loaded. Note the SAP menu and BW toolbar.
[View full size image]
Two new drivers have been added to the XI R2 version of the SAP Integration Kit.
The MDX query driver supports using Crystal Reports to report off either a SAP BW query or a BW Cube.
Furthermore, it adds additional functionality by providing support for
A structure in both the row and column of the BW query
Hierarchy node and hierarchy node variables
Free characteristics in a BW query
The Operational Data Store or ODS driver exposes the ODS tables, so that they look much like the tables of any relational database. However, because of the structure of the objects, it considers them to be like a database stored procedure.
Connecting to the ODS objects is not performed with the SAP toolbar described here, but rather by selecting the driver from the Data Explorer as shown in Chapter 1, "Creating and Designing Basic Reports." After the user has finished building the report, the report can be saved back to BW and published to Business Objects Enterprise by selecting the Automatically Publish to Enterprise check box, as shown in Figure 15.4.
Figure 15.4. The additional options after saving a Crystal Report to SAP BW.
Note
This publishing method requires some setup. Please refer to the Installation documentation for further details.
Note
Both the ODS and MDX drivers require SAP transports to be loaded on the SAP BW system. Please refer to the Installation CD in the Transports folder for further details.
Using OLAP or Web Intelligence to Report off BW Data
Included in the SAP Integration Kit are specific drivers to allow OLAP Intelligence and Web Intelligence to report off of SAP BW.
To connect to a BW cube or query using OLAP Intelligence, open the connection browser and select Add. Select SAP Business Information Warehouse and then proceed to fill in the relevant data, as shown in Figure 15.5.
Figure 15.5. The information required to connect to a BW cube or query from OLAP Intelligence.
[View full size image]
After you are connected, select the query or cube and process to build the report, as described in Chapter 19, "Creating OLAP Intelligence Reports."
Web Intelligence is new to XI R2 and requires that a universe be built on a BW Cube or Query. However, to aid in this process, Designer builds the universe for you. To do this, select SAP from the list of connects and fill out the required information, as displayed in Figure 15.6.
Figure 15.6. The information required to connect to a BW cube or query from Web Intelligence.
[View full size image]
Finish the remainder of the wizard and when you click OK, Designer generates the Universe for you. It may be necessary to move some of the objects around to suit your needs, but when you are finished, export to Business Objects Enterprise.
Note
Only the BW query driver does not require the query be released for external access. The Web Intelligence, OLAP Intelligence, and MDX drivers require the user to release the BW query. To release a query, select the query properties in the BW Query Designer and select the Extended Tab and then check Allow External Access to This Query.
Viewing the Reports
Your SAP reports can be viewed either via the SAP integration kit's InfoView or via SAP Enterprise Portal 6. The integration kit provides a number of sample iViews that can be imported by a portal administrator. These include
Folder iView The folders a user has access to are displayed, and from here a user can run her reports.
Alert iView Shows all the alerts that have been triggered by Crystal Reports. The user can then click on the report to view the report. The creation of alerts is defined in Chapter 11, "Using Record Selections and Alerts for Interactive Reporting."
Thumbnail iView This iView displays the Crystal Report as a thumbnail of the report. The user can then click on the thumbnail to run the report.
Note
These are sample iViews. The organization can create its own iViews via the provided SDK.
BusinessObjects InfoView for SAP is a unique version of InfoView designed for integration with SAP BW systems. This integration includes features such as the ability to log on to InfoView using your SAP username and password. Related to authentication is the ability to access your roles and the Crystal Reports saved to these roles. The roles are defined in Enterprise as folders. The user can also schedule reports in the different languages loaded into SAP BW. This creates an instance for each language.
for remainig info pls use the link
http://book.soundonair.ru/sams/ch15lev1sec7.html
very good link for sap integartion kit
thanks
karthik
reward me points if the above info is usefull.
dont forget

License for Crystal Report for Visual Studion 2005

Hi All,
I am developing reports for my application using crystal reports for VS 2005. I read on microsoft site (http://support.microsoft.com/kb/318102 ) that the free server software supports three active requests to the server. It further says that developer will need to purchase additional licenses to increase scalability. I think that our application would need the additional license. However, i was unable to find a link on business objects site were i can buy the additional license for crystal report for VS 2005. The link takes me to license for Crystal report 2008. It would be great if you can answer my following questions:
- what version of crystal reports do we need to purchase?
- do we need license for each implementation or do we need license for the developers only.
Thank you.
Best regards,
Abdul

Great questions! Let's get at em, one at a time:
How would you define a print job?
- A print job will essentially be consumed any time the print engine (crpe32.dll) needs to do work. So, processing one report = a print job. However, say you have one subreport, now the number of print jobs = 2. Now, say the subreport is in the details section and runs once per record. And you have 100 records. You will be running 1 + 100 print jobs. Paging to another page consumes a print job. Zooming consumes a print job, exporting and printing to a printer consumes a print job. So, depending on the report and the number of users, print jobs may be used up quite quickly. You can increase the print job limit by modifying the PrintJobLimit in the registry. For CR 2008, the reg entry is here:
HKLMsoftware usiness objectssuite 12.0
eport application serverinprocserver
(the above is used irrespective of the SDK (CR, RAS, BOE))
I am not using report viewer to render the report. I use 'ExportToDisk' method to save the report in word or pdf format. Does 'ExportToDisk' make one print job?
- see above. Again, if the report has a subreport, this will consume at least two print jobs.
How much time does a typical print job takes to complete?
- no way to tell in general terms. There are too many variables that will affect this. From how complex the report to database connections to version of runtime
What care shall I take to reduce the print job time?
- Best you can do is ensure that you are destroying the report object once you are done with it (report.close, report.dispose)
Will using Report Application Server (RAS) or Business Objects Enterprise increase the number of concurrent print jobs? If yes then by what amount?
- no it will not
To utilize Report Application Server (RAS) or Business Objects Enterprise, do I just need to use a specific SDK or is there some thing more to it?
- You do need to use the RAS assemblies for RAS, BOE assemblies for BOE. More information is below.
Sample RAS apps:
https://boc.sdn.sap.com/samples/84/1194
An article on RAS:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10b840c0-623f-2b10-03b5-9d1913866b32
A power point as to which may be the best SDK to use:
https://boc.sdn.sap.com/node/972
Differences between all the SDKs (webinar):
https://www.sdn.sap.com/irj/sdn/crystalreports-dotnet?rid=/webcontent/uuid/106b8996-067e-2b10-2f8a-d8c136b3e330
BOE samples:
https://boc.sdn.sap.com/samples/84/1193
BOE SDK library:
http://devlibrary.businessobjects.com/BusinessObjectsXIR2SP2/en/devsuite.htm
Ludek

BOBJ 4.0 Upgrade: Impact on Int Kit customizations for crystal reports?

BW Version 7.01
BOBJ version XI 3.1
We would like to upgrade to BOBJ 4.0, could anyone provide input on these questions?
1 - Can we keep BW 7.01, or do we need to look into upgrading to 7.3? We'd prefer to not touch bw now. If we move to bobj 4.0, does BW need to be touched?
2 - We have modified these function modules in BW (i believe they are part of the integration kit in SAP BW) to meet end user requirements for crystal reports; will crystal reports in BOBJ 4.0 still work with these? I believe one of the improvements is that these aren't used anymore for performance reasons???
BAPI_MDPROVIDER_GET_VARIABLE
BAPI_MDDATASET_CREATE_OBJECT
BAPI_MDDATASET_GET_AXIS_DATA
BAPI_MDPROVIDER_GET_MEMBERS
BAPI_MDPROVIDER_GET_MEMBERS
3 - 99% of our reports are crystal, are there any other hurdles or reasons why we should be cautious moving to 4.0? We are looking to roll out explorer, webi, and xcelsius and would rather go ahead and catch up to 4.0...
Thanks,
Matt

Hi,
1. i'd recommend having a seperate BW for BI4 purposes. If anything, it makes management of integration TRANSPORTs much easier, given that you can only have 1 version active..
(yes, although there's no SAP IK Kit, transports are still imported into backend)
2. OLAP BAPI access is still there in BI4.0, namely for the CR 2011 tool with BW MDX Driver , and for Webi documents using the legacy Universe Design Tool OLAP.unv file.
the new OLAP data access driver for SAP in BI4.0 is the BW's BI Consumer Service (BICS API). The function modules for this are generally called: BICS_PROV_GET*
3. No hurdle at all. You can migrate your content as-is without fear of change. that's principally why the CR 2011 client is there for the 4.0 RTC - for adoption and onboarding. That legacy CR client technology is wholy unchanged, apart from .xlsx support and a 'read only' save mode.
the Crystal for Enterprise product is still playing catch up. It hasn't got all (any) of the direct drivers you would expect from crystal, but it can consume the new .unx common semantic layer and the BICS jco driver (neither of which the CR2011 product can)
... as of 4.1 (Q1 2012) the fit-gap in features is answered. i.e. they've all been fwd ported.
i hope this helps
Regards,
H

Merge Module for crystal report 8.5

Post Author: S_Muhilan
CA Forum: Deployment
Hi,
I want merger module for crystal report 8.5 which can be used with VB 6 package and deployment wizard.
Regards
S. Muhilan

Post Author: ejthunder
CA Forum: Deployment
Hello,
Crystal never had merge modules for v8.5 - you have to build your own deployment package. I think Wise or Installshield use to make their own merge modules way back in the day, but they were never supported by Crystal, and I doubt they're available anymore.
Additionally, VB6's Package and Deployment Wizard does not support configurable merge modules. Current versions of Crystal Reports (v10, v11.0, v11.5) require that the license msm (for RDC deployment) be configured with the keycode. The PDW won't support this.
I hope this helps.
EJ

Merge files or redist installer for Crystal Reports 2011

I cannot find packages for merge files or installer for the redistribution files for Crystal Reports 2011. I have found them only for older versions. In the download section there is somewhere a hint that they are at a different position but no information where.
Can anyone help me?
Thank you
Arne Ortlinghaus

Hi Don,
thank you. It is ok using the files you indicated me. But there are still some doubts.
What does happen on a machine where a designer 2011 (internal version 14) is installed and an application that uses the dlls for Visual Studio 2010 (internal version 13). Does this work without problems?
In a readme for the redistributables for Visual Studio 2010 I have found the following text which I cannot interprete:
If you have installed Crystal Reports 2011 or any of the SAP BusinessObjects XI 4.0 products,
you may notice that their installation contains the same "Crystal Reports 2011" and "SAP
BusinessObjects Enterprise XI 4.0" folders as you see in this folder. Please note that the
folder/files names may be the same but most files have a different version, and are not
compatible with the Crystal Reports 2011 or SAP BusinessObjects XI 4.0 products.
Currently we want to upgrade our programs from Crystal Reports 9 to 2011 and we have many installations where for one machine the Crystal Reports Designer is needed together with our applications.
Arne Ortlinghaus

Does Business Objects XI still support RDC for Crystal Reports?

Similar Messages

Maybe you are looking for