Does BW unicode reports run on Portal 60 SP11, without any problem?

Hi,
Does BW unicode reports run on Portal 60 SP11, without any problems?
Thanks,

Hi,
Does BW unicode reports run on Portal 60 SP11, without any problems?
Thanks,

Similar Messages

  • Will Developer 6i run on Windows 7 without any problems?

    Will Developer 6i run on Windows 7 without any problems? and developer 6i supports on windows 7 or not.

    Hi,
    As a matter of fact the Dev 6i tools (form and report builder) is supported and will be supported as they are certified with E-business 11.5.x.x. version....product
    Take a look at :
    "Which Version Of Dev 6i Tools (Reports & Forms Builder) Is Supported With E-Business Suite 11.5" (Metalink Note:418667.1)
    Greetings,
    Sim

  • Hi, I wish to buy an Adobe Master Collection CS3 (Corporate Edition) from someone in the US and I hope to use it in the UK. Does anyone know if this can be done without any problems, also does Adobe still allow people to register the CS3 Corporate Edition

    Hi, I wish to buy an Adobe Master Collection CS3 (Corporate Edition) from someone in the US and I hope to use it in the UK. Does anyone know if this can be done without any problems, also does Adobe still allow people to register the CS3 Corporate Edition? any help would be greatly appreciated

    The flaw is here:
    corporate edition
    ...which essentially means it's most likely a volume license and thus not transferable in the first place. The rest is as Steve said - buying software on eBay is risky even on the best of days.
    Mylenium

  • MacBook Pro does not boot when 'cold', Windows 7 on the other hand boots without any problem

    Hey everyone,
    I have a strange problem with my MacBook Pro mid 2009 13" running OSX Mavericks. For more than a year I have trouble booting my laptop. A 'cold' start (a fresh boot) usually ends with the prohibition sign on a grey back ground (starting in verbose mode results in the error message that the main drive could not be found). So far so strange.
    I have Windnows 7 installed as a bootcamp partition. If I start the laptop with Windows booting is no problem and Windows runs smoothly (what a terrible world we live in). If I let the laptop run for let say 10 minutes and restart the laptop Mac OS starts without any problems. (It doesn't work if I immediately restart after windows booted; also reinstalling Mac OS as a clean install from an external medium did not change the problem; disk utility always finds something to repair but neither discpermission repair nor disk repair got rid of the problem).
    As an additional comment a WD 500GB Scorbio Blue replaced the original hard drive about a years ago. I had no problems with the hard drive initally and I can't really believe that there is a problem with the hardware, I mean, why does Windows start and Mac OS doesn't?
    Thanks for your time and help!
    Marco

    This isn't a direct answer to your issue but have you considered installing Wine so you can run the occasional windows app directly in OSX? It's a much more elegant solution IMHO. This avoids restarting all the time with Bootcamp and avoids crashing all the time (and the security risks) with Windows running.

  • I am having trouble connecting MacBook Pro (10.6.7) to Novell server. I get incorrect username and password message. I can connect worksations running 10.5 without any problem. Any possible solution? Thanks, Ned

    I am having trouble connecting MacBook Pro (10.6.7) to Novell server. I get incorrect username and password message. I can connect worksations running 10.5 without any problem. Any possible solution? Thanks, Ned

    Having the exact same problem with connecting ML and Snow Leopard machines to a Windows 8.1 machine. Oddly enough, connecting and copying to/from works perfectly from a Mavericks machine, despite the problems reported about Mavericks regarding the exact opposite. An old thread, but did you find a solution?

  • I run a Windows 8.1 -  Photoshop CS5 under Parallels on an iMac one year old and both having the latest OS. I use a NIK plugin "VIVEZA" which run fine for years without a problem. Latelt and without a reason, the NIK plugin has gone corrupt, (can not use

    @I run a Windows 8.1 -  Photoshop CS5 under Parallels on an iMac one year old and both having the latest OS. I use a NIK plugin "VIVEZA" which run fine for years without a problem. Latelt and without a reason, the NIK plugin has gone corrupt, (can not use it more the 2 corrections after a get a black background message that there is not enough memory) and the system stops running and a must restart is required. How do I fix this terrible problem?
    If it requires a Photoshop CS5 re-install, (I belief that it may fix the problem) and re-install the two third party plugins (NIK Viveza) and (Onone Perfect Resize) how and where do I get to the proper Adobe upload page to do that.
    I have tried to fix this problem by changing the memory allocations, I have spend many hours on it and are very disgusted with it but it needs to be fixed. The current memory settings are;
    Ram available = 1588 MB
    Range = 873 -1143 MB
    Recommended Photoshop usage range =  857  however I have tried every setting to max and in between. Nothing works. Current setting = 1588 (max)
    The Photoshop I use is registered, I have product # and order # .

    Contact NIK for updated/upgraded versions of their plug-ins.  They have been having a lot of issues with their plug-ins.

  • HT1947 Does anyone else have my problem with atv3? Plays films in iTunes without any problems but on music every time I use the remote app on my iPhone 3GS it stops playing after around 5 tracks in. Anyone having this problem?

    Does anyone share my problem with atv3 I can play films through iTunes without any problems. When I start playing music using the remote app on my iPhone 3GS after around 5 tracks in it just stops playing and seems to lose my connection. Hoping this is human error on my part?

    I think this is probably a sign that your network could be better than it is.
    Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
    You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
    Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
    There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first.

  • I have a Macbook Air 2011. Can i run Bit-locker in Windows 7 Ultimate without any problems?

    I have a Macbook Air 2011. Can i run Bit-locker in Windows 7 Ultimate without any problems?

    montana girl wrote:
    I purchased a MacBook AIr Nov. 2011 11" and current OS X 10.7.5.  I read that I needed to update to Snow Leopard before I can update to Maverick, ...
    Whatever you read was incorrect. You can upgrade directly to Mavericks. It is in the App Store and is free.
    Snow Leopard predates the operating system you already have. That's the reason it will not install on your MacBook Air. You spent $20 needlessly for it, but it's yours to resell if you wish.

  • I have problems printing with a HP Officejet 6500 printer directly from my iMac. The printer itself does function well, as I can print from another PC without any problems. Does anyone have a clue?

    I have problems printing with a HP Officejet 6500 printer directly from my iMac. The printer itself does function well, as I can print from another PC without any problems. Does anyone have a clue?

    Hello:
    I must apologize  .  I should have checked here first:
    http://support.apple.com/kb/HT3669#HP
    According to the list, there is no driver for your printer included in OS X 10.7.
    There are a couple of options:
    1.  Contact HP to see if they have a workaround.
    2. If the model of printer is not listed but your printer is a PostScript printer or PCL Laser printer, try the "Generic PostScript" or "PCL Laser printer" drivers.  Generic printer drivers may not let you access all the features of your printer.
    I have not tried #2, but some people have had success.
    Barry

  • Is it possible to convert Java to EXE and run this EXE file without any JRE

    hello friends
    I have GCC/GCJ for windows but dont know how to work with it... it creates file with .o extension but i m not able to create .exe from that... i installed mingw for that also .. unsuccessful ...
    tell me the solution for it... i want to generate machine dependent exe from java file...on the web i ve seen that GCC/GCJ is used on linux platform..not cleared properly..
    Again i m writing my question
    Is it possible to convert Java to EXE and run this EXE file without any JRE if yes then how... tell me the procedure to do that...

    Vipul wrote:
    Its software now hardware .... some times u need these things ...anyway do u ve solution for my questionSo what? By creating a native executable you are restricting the program to the OS for which that native executable was made, just like removing the engine from a car restricts driving to downhill only. So like the I said, the principle remains the same, "Why would you want to?"
    I am asking you, truthfully, why do you feel the need to negate the largest advantage of using Java by creating a native executable from it?
    What is your rationale?
    I can pretty much guarantee there is a much better way of achieving your wish without "removing the engine".

  • HT3275 My Time Capsule has been backing up without any problems and all of a sudden it stops reading on my computer. The external hard drive beeps three times and the motter wont run within. What happened?

    My Time Capsule has been backing up without any problems and all of a sudden it stops reading on my computer. The external hard drive beeps three times and the motter wont run within. The light that usually blinks while in use is no longer blinking and is on constant. What happened?

    abailey46 wrote:
    My Time Capsule has been backing up without any problems and all of a sudden it stops reading on my computer. The external hard drive beeps three times and the motter wont run within. The light that usually blinks while in use is no longer blinking and is on constant. What happened?
    Sorry we are unclear as to the external hard drive and its connection to the TC..
    For instance the light that blinks.. is that the TC or external hard disk or what.
    Did you try just rebooting / restart the whole network in correct order.. modem.. router / TC.. external drive.. clients with 2min gap between each.
    Are you actually running Snow Leopard as the profile states?
    How old is the TC?

  • Does the .rep report  run faster than the same program in .rdf format

    Hello,
         We have some reports timing out because they take too
    long to bring back results. If we used the .rep file instead of
    the .rdf file, will the reports run faster? Does it take very
    long to compile or is it most likely the SQL needs to be tuned
    for better performance?
    Thanks in Advance..
    Pmoore31

    No, the report will not run faster. It is most likely that you
    need to fine tune the SQL.

  • I use Open Office as my program. it does convert to msoffice. Will this cause me any problems in converting content ?

    I use open Office for my work. I can convert to ms office. will this cause any problems ?

    Hi warbird16,
    I'm curious how PDF comes into play. If you're only dealing wit OpenOffice > MS Office, and are wondering how those two applications interact, Microsoft is better suited to answer that.
    If you're wondering about converting PDF files to Word, that does fall into Adobe's realm. Can you please elaborate on how the pieces fit together in your workflow?
    I look forward to hearing back from you.
    Best,
    Sara

  • Premiere Pro CS6 does not recognize USB PnP Sound device connected  to iMac OSX even when activated in Audio MIDI setup. The iMac(i-7 processor,16 GB)   is working with this USB device without any problem

    Premiere Pro CS6 does not recognize the USB PnP Sound device in order to produce a commentary sound track. The USB device has been activated on the iMac OSX by using the Audio-MIDI-setup and is working correctly with the iMac. When opening > presets >audio hardware I can only select between >standard >out  integrated > digital input integrated >microphone integrated. USB PnP is not indicated at this place.
    With the built-in microphone of the iMac I can produce the commentary sound track, but I would prefer a stand alone version for better quality.
    Your help is highly appreciated. Thanks in advance, Annemarie!

    I'm using a Logitech Webcam Pro 9000 (which has a microphone on the side). I have several other devices plugged into separate USB slots: a keyboard, a mouse, my iPhone, and a Roland keyboard midi controller.
    I've considered that maybe the webcam/mic combo is the culprit. If USB doesn't work at a constant speed, that could very well be causing the issue! The sound begins to lag badly sometimes when it's working properly, so that there's a multisecond delay between speaking and hearing my voice repeated back over the mic which is another sign that something is wrong. I've also caught it making a strange electronic sound during its "hang" time once it stops taking sound input correctly.
    Maybe I should try to use line-in and forgo USB altogether then. I think I'd need a preamp and some sort of converter for that since the Mac Mini lacks a powered mic jack. I'm only a newbie musician so I've never set up such a system but it might be a better solution in the long run.
    I'll check to see if it hangs before or after my computer enters suspend mode, that's a good suggestion too. Thank you for your help!

  • Report to check org units without any position display

    Dear All,
    I want a report which i can see only the org units in a graphical way. When i am checking through Simple maintainence mode I am getting org units along with positions also with in the graphical mode i have selected the view option under options menu there can able to see individual departments along with positions.
    My request is i want to see the organization structure along with sub org units under sub org units with departments without positions. please let me know is there any standard reports available.
    Regards,
    HR user

    Yes, the Report is
    S_AHR_61016493-Organizational Structure-Organizational Structure
    Select the first line and press F8

Maybe you are looking for