Does Caringorm and Flex4 go together?

I installed the Flash Builder and used it over a week,
Everything was ok till i tried to use the Cairngorm with my new code (getting lot of errors and wierd things).
Can someone tell me if i missing anything? Is there a Cairngorm for Flash Builder?

No that would not work. Muse is more for static brochure sites at the moment. I am sure they will add more cms type functions once it matures a little more.

Similar Messages

My iphone's screen goes black and it behaves like that it is switched off.No switches work and the power button also does not respond.The ringtone do not also respond.The only way to switch on the phone is to press home button and power button together.

My iphone's screen goes black and it behaves like that it is switched off.No switches work and the power button also does not respond.The ringtone do not also respond.The only way to switch on the phone is to press home button and power button together.

Pressing the Home button and the sleep/wake or on/off button together until you see the Apple logo and then release is called a reset.
If no change after a reset, the next step is restoring your iPhone.

Iphone5 stuck. Won't go past Apple logo. Sleep/wake and home button together don't help. Connecting to iTunes also does not wo

MY iphone5 is stuck on apple logo. Sleep/wake and home button together don't work and connecting to iTunes doesn't either. Anyone any ideas

You need to hold both those buttons down for several seconds, until the Apple logo reappears. Don't release until then.

Ipad will not turn on the screen is just black, using the hone and power buttom together does not fix it

my ipad screen is blue, using the home and power buttons together do not fix it.

If you can't reset it by holding the power and home buttons at the same time until you see the Apple logo, then releasing, connect it to your charger for at least 15 minutes then try resetting it again If it won't reset make an appointment with the Genius bar at a nearby Apple store to have it looked at.

Perform static and dynamic check together on a customer?

Hello All,
Is it possible to perform static and dynamic check together on a customer?
I believe standard SAP does not allow both options together.
The scenario is: My client has customer who orders products 1 year in advance and create sales order with a future delivery date. The customer might have balance due on their account which is close to the credit limit. As a result the sale order should be blocked as if the automatic credit check is "Static". This would allow our customer service to call the customer and arrange for the payments.
Then 11 months later, a dynamic check should be performed on the customer to make sure the past due is under the credit limit. If the past due is over credit limit, the sales order must be blocked for delivery as if the credit check was "Dynamic" with 30 days horizon. This would again give our customer service time to settle the payment with the customer.
If anyone has implemented such a scenario, can you please give me an overview of how you did it?
Thanks very much in advance and Text Removed.
With Regards,
AM
Edited by: Lakshmipathi on Nov 13, 2010 9:23 AM
Please dont include this text

Static and Dynamic Cannot be Performed together. They are mutually exclusive events.
Credit check can be performed either at Sale order level or at Delivery / PGI Level.
FCV3 is a good report to see whether a customer would fail a credit check. ( suitable for your customer service )
Coming to your Point , Assuming that the customer is eligible for a Credit of 50 Lacs. Now the Customer has placed an order for 60 Lacs. We set the Customer credit checking at order level . The Customers Sale order would get blocked.
The Customer service will follow up for the payment and see to it that it is made. Assume the customer has made a payment for 70 Lacs.
Now let us have a look at the account statement of the customer.
Account Statement : Customer Cr : 70 Lacs. Dr : 0. ( because no delivery and invoice so far has been made )
So we are supposed to deliver the Material worth value of 60 Lacs.
The First sale order worth 60 Lacs has been unblocked in VKM3. Now at the time of Delivery level why would you want to chekc the Credit limit again ? It has already passed the credit check.
It is not necessary to check credit limit . Because you have already performed the same at the order level.
Now the customer has come again and raised another sale order for 80 Lacs. The System would block him.
The system will never block the Previous delivery which you are, due for delivery to the customer.
If we keep on checking the Credits without delivering we would end up only raising in Sale orders and no Delivery to the Customer at all. The Debit side of his account will always be 0.
So i donot think Static and dynamic is needed . you can go for either Static or Dynamic.

Abap and java stack together gives error message...

I am trying to install abap stach and java stack together.
I installed abap was without problem but when I install Java i get the error below.
I tried SP09 and since it didnt work Sp07 also since I had it with me downloaded before.
Any help ??? Got stuck
I need to install together to practice webdynpro...
E:\NW2004sSP7_Preview\SAP_NetWeaver_2004s_SR_1_Installation_Master_DVD__ID__NW05SR1_IM1\IM_WINDOWS_I386\NW04S\WEBAS\ADA\control.xml
George
INFO 2006-11-30 15:10:12
An error occured and the user decided to rety the current step: "|NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0|collect".
ERROR 2006-11-30 15:10:14
FJS-00003 TypeError: this._name has no properties (in script NW_Java_OneHost|ind|ind|ind|ind, line 8987: ???)
INFO[E] 2006-11-30 15:10:13
FSL-02077 File system export (share) saploc does not exist.
ERROR 2006-11-30 15:10:14
FCO-00011 The step collect with step key |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0|collect was executed with status ERROR .
THis error was gone when I used the registry cleaner for removing ABAp stack But now question is How do I install BOTH????
May be the instance number is the problem....
In old version of ABap stack we can enter the instance number .But not in SP 9 .Can we change here too?
E:\NW2004sSP7_Preview\SAP_NetWeaver_2004s_SR_1_Installation_Master_DVD__ID__NW05SR1_IM1\IM_WINDOWS_I386\NW04S\WEBAS\ADA\control.xml
This file holds the Key of the errors since it checks for the instance number which is given in the log as details.. May be we can change it....
In ABap STack install instead of files as in SP 07 they have created an image and may be this si the reason that
we cannot customize.I have to find a way in order to install it...

i found soltuion myslef THe lates WAS for abap is preconfigured and so its not suitable for abap-java multiple installation

Can i use JSF tags and HTML tages Together

i am trying to use html and JSf tages together. i hope it should owrk. but for me html tags are not working.
can any one help me

thanks
its working but i have one more clarification
can we wuse jsf tags in javascript
for examp
this my javascript using html
newQuotCell1[0].innerHTML='<input type=text class=TextField name="nameofEmployer'+count1+'">';
if i want to write a jsf tage there . does it allow
i want to bind the textfield with bean value . Is it possibel.
please let me know.
thansk in advance

HT1277 Can you use Apple Mail program Rules and Gmail filters together?

Can you use Apple Mail program Rules and Gmail filters together? Does the gmail filtering override the Mail Rules?

Mail > Window > Previous Recipients

Photoshop CS 3 and CS 4 together

Can Photoshop CS3 and CS4 coexist together on the same computer (XP/SP3) as long as each is installed in its own directory? Does CS4 take over default file preferences such as what program will open if one clicks on a .psd file for example?..........frank

John and Rob,
Many thanks for your helpful and informative replies; you've answered my questions. BTW, no problems with understanding and assigning file associations etc. in Windows...I am familiar with that sort of thing. I was mainly curious to know, if when I install C4, if it would grab all the file associations now assigned to C3. "Open with" will indeed take care of that, and yes, I can always reassign file associations in Windows anyway, so no real problem there. Cheers.................frank

CSA agent and NAC agent together

Hi, do you have experience of CSA agent and NAC agent together on the same pc ?
Does one include the other ?
Which one have I to test first ?
thank you in advance
greatings
RS

Cisco Trust Agent collects security posture information from the NAC-compliant applications running on the network client and reports them to the Cisco Secure Access Control Server (ACS). These are some NAC-compliant applications:
- Antivirus applications
- Personal firewalls
- Host-based intrusion protection applications, such as Cisco Security Agent (CSA)
Cisco NAC is a strategic element of the Self-Defending Network. Working together with other Self-Defending Network components such as Cisco Security Agent and the Cisco Security Monitoring, Analysis, and Response System (Cisco Security MARS), Cisco NAC helps organizations achieve more accurate threat identification and prevention while increasing patch management efficiency.

When creating a multi page document, some of my thumbnails become linked and can't be separated for editing. What am I doing wrong and how do I correct this?

When creating a multi page document, some of my thumbnails become linked and therefore impossible to rearrange. What am I doing wrong and how do I correct this?

The pages in sections stick together because the text flows between the pages.
Insert a section break to isolate pages between sections.
Now this all works in Pages '09, unfortunately Pages 5 doesn't let you.
Peter

How to move Line, Grid and X Ticks together?

The code below plots a XYLineChart: by left mouse click and drag the plotted line can be translated left/right.
package javafxapplication3;
import javafx.application.Application;
import javafx.beans.property.SimpleDoubleProperty;
import javafx.event.EventHandler;
import javafx.scene.chart.NumberAxis;
import javafx.scene.chart.XYChart;
import javafx.stage.Stage;
import javafx.scene.Scene;
import javafx.scene.chart.LineChart;
import javafx.scene.input.MouseEvent;
import javafx.scene.layout.BorderPane;
public class GridMove extends Application {
BorderPane pane;
XYChart.Series series1 = new XYChart.Series();
SimpleDoubleProperty rectinitX = new SimpleDoubleProperty();
SimpleDoubleProperty rectX = new SimpleDoubleProperty();
SimpleDoubleProperty rectY = new SimpleDoubleProperty();
@Override
public void start(Stage stage) {
final NumberAxis xAxis = new NumberAxis(1, 12, 1);
final NumberAxis yAxis = new NumberAxis(0.53000, 0.53910, 0.0005);
xAxis.setAnimated(false);
yAxis.setAnimated(false);
yAxis.setTickLabelFormatter(new NumberAxis.DefaultFormatter(yAxis) {
    @Override
    public String toString(Number object) {
        return String.format("%7.5f", object);
final LineChart<Number, Number> lineChart = new LineChart<Number, Number>(xAxis, yAxis);
lineChart.setCreateSymbols(false);
lineChart.setAlternativeRowFillVisible(false);
lineChart.setAnimated(false);
lineChart.setLegendVisible(false);
series1.getData().add(new XYChart.Data(1, 0.53185));
series1.getData().add(new XYChart.Data(2, 0.532235));
series1.getData().add(new XYChart.Data(3, 0.53234));
series1.getData().add(new XYChart.Data(4, 0.538765));
series1.getData().add(new XYChart.Data(5, 0.53442));
series1.getData().add(new XYChart.Data(6, 0.534658));
series1.getData().add(new XYChart.Data(7, 0.53023));
series1.getData().add(new XYChart.Data(8, 0.53001));
series1.getData().add(new XYChart.Data(9, 0.53589));
series1.getData().add(new XYChart.Data(10, 0.53476));
pane = new BorderPane();
pane.setCenter(lineChart);
Scene scene = new Scene(pane, 800, 600);
lineChart.getData().addAll(series1);
stage.setScene(scene);
scene.setOnMouseClicked(mouseHandler);
scene.setOnMouseDragged(mouseHandler);
scene.setOnMouseEntered(mouseHandler);
scene.setOnMouseExited(mouseHandler);
scene.setOnMouseMoved(mouseHandler);
scene.setOnMousePressed(mouseHandler);
scene.setOnMouseReleased(mouseHandler);
stage.show();
EventHandler<MouseEvent> mouseHandler = new EventHandler<MouseEvent>() {
@Override
public void handle(MouseEvent mouseEvent) {
    if (mouseEvent.getEventType() == MouseEvent.MOUSE_PRESSED) {
        rectinitX.set(mouseEvent.getX());
    else if (mouseEvent.getEventType() == MouseEvent.MOUSE_DRAGGED || mouseEvent.getEventType() == MouseEvent.MOUSE_MOVED) {
        LineChart<Number, Number> lineChart = (LineChart<Number, Number>) pane.getCenter();
        NumberAxis xAxis = (NumberAxis) lineChart.getXAxis();
        double Tgap = xAxis.getWidth()/(xAxis.getUpperBound() - xAxis.getLowerBound());
        double newXlower=xAxis.getLowerBound(), newXupper=xAxis.getUpperBound();
        double Delta=0.3;
        if(mouseEvent.getEventType() == MouseEvent.MOUSE_DRAGGED){
        if(rectinitX.get() < mouseEvent.getX()){
            newXlower=xAxis.getLowerBound()-Delta;
            newXupper=xAxis.getUpperBound()-Delta;
    else if(rectinitX.get() > mouseEvent.getX()){
            newXlower=xAxis.getLowerBound()+Delta;
            newXupper=xAxis.getUpperBound()+Delta;
        xAxis.setLowerBound( newXlower );
        xAxis.setUpperBound( newXupper );
        rectinitX.set(mouseEvent.getX());
    public static void main(String[] args) {
        launch(args);
}My question is: now by moving the Line left/right, Grid and X Ticks does not move: so, how to translate Line, Grid and X Ticks together?
Any help really appreciated!
Thanks
Edit: nobody willing to help?
Edited by: 932518 on 30-ott-2012 1.31
Edited by: 932518 on 31-ott-2012 8.49

Some code improvements, now grid and line moves together. It only remains to move X axis ticks along with line and grid, and vertical grid lines are missing outside line range values
import javafx.application.Application;
import javafx.beans.property.DoubleProperty;
import javafx.beans.property.SimpleDoubleProperty;
import javafx.collections.ObservableList;
import javafx.event.EventHandler;
import javafx.scene.chart.Axis;
import javafx.scene.chart.NumberAxis;
import javafx.scene.chart.XYChart;
import javafx.scene.chart.XYChart.Series;
import javafx.stage.Stage;
import javafx.scene.Node;
import javafx.scene.Scene;
import javafx.scene.chart.LineChart;
import javafx.scene.input.MouseEvent;
import javafx.scene.layout.BorderPane;
import javafx.scene.shape.LineTo;
import javafx.scene.shape.MoveTo;
import javafx.scene.shape.Path;
public class GridMove extends Application {
BorderPane pane;
XYChart.Series series1 = new XYChart.Series();
SimpleDoubleProperty rectinitX = new SimpleDoubleProperty();
SimpleDoubleProperty rectX = new SimpleDoubleProperty();
SimpleDoubleProperty rectY = new SimpleDoubleProperty();
LineChart<Number, Number> lineChart;
@Override
public void start(Stage stage) {
    final NumberAxis xAxis = new NumberAxis(1, 12, 1);
    final NumberAxis yAxis = new NumberAxis(0.53000, 0.53910, 0.0005);
    xAxis.setAnimated(false);
    yAxis.setAnimated(false);
    yAxis.setTickLabelFormatter(new NumberAxis.DefaultFormatter(yAxis) {
        @Override
        public String toString(Number object) {
            return String.format("%7.5f", object);
    lineChart = new LineChart<Number, Number>(xAxis, yAxis);
    lineChart.setCreateSymbols(false);
    lineChart.setAlternativeRowFillVisible(false);
    lineChart.setAnimated(false);
    lineChart.setLegendVisible(false);
    series1.getData().add(new XYChart.Data(1, 0.53185));
    series1.getData().add(new XYChart.Data(2, 0.532235));
    series1.getData().add(new XYChart.Data(3, 0.53234));
    series1.getData().add(new XYChart.Data(4, 0.538765));
    series1.getData().add(new XYChart.Data(5, 0.53442));
    series1.getData().add(new XYChart.Data(6, 0.534658));
    series1.getData().add(new XYChart.Data(7, 0.53023));
    series1.getData().add(new XYChart.Data(8, 0.53001));
    series1.getData().add(new XYChart.Data(9, 0.53589));
    series1.getData().add(new XYChart.Data(10, 0.53476));
    pane = new BorderPane();
    pane.setCenter(lineChart);
    Scene scene = new Scene(pane, 800, 600);
    lineChart.getData().addAll(series1);
    stage.setScene(scene);
    scene.setOnMouseClicked(mouseHandler);
    scene.setOnMouseDragged(mouseHandler);
    scene.setOnMouseEntered(mouseHandler);
    scene.setOnMouseExited(mouseHandler);
    scene.setOnMouseMoved(mouseHandler);
    scene.setOnMousePressed(mouseHandler);
    scene.setOnMouseReleased(mouseHandler);
    stage.show();
EventHandler<MouseEvent> mouseHandler = new EventHandler<MouseEvent>() {
    @Override
    public void handle(MouseEvent mouseEvent) {
          if (mouseEvent.getEventType() == MouseEvent.MOUSE_PRESSED) {
            rectinitX.set(mouseEvent.getX());
        } else if (mouseEvent.getEventType() == MouseEvent.MOUSE_DRAGGED || mouseEvent.getEventType() == MouseEvent.MOUSE_MOVED) {
            LineChart<Number, Number> lineChart = (LineChart<Number, Number>) pane.getCenter();
            NumberAxis xAxis = (NumberAxis) lineChart.getXAxis();
            double newXlower = xAxis.getLowerBound(), newXupper = xAxis.getUpperBound();
            double Delta = 0.3;
            if (mouseEvent.getEventType() == MouseEvent.MOUSE_DRAGGED) {
                if (rectinitX.get() < mouseEvent.getX()) {
                    Delta *= -1;
                newXlower = xAxis.getLowerBound() + Delta;
                newXupper = xAxis.getUpperBound() + Delta;
                xAxis.setLowerBound(newXlower);
                xAxis.setUpperBound(newXupper);
                DoubleProperty p1 = xAxis.scaleXProperty();
                DoubleProperty p2 = xAxis.translateXProperty();
                double horizontalValueRange = xAxis.getUpperBound() - xAxis.getLowerBound();
                double horizontalWidthPixels = xAxis.getWidth();
                //pixels per unit
                double xScale = horizontalWidthPixels / horizontalValueRange;
                Set<Node> nodes = lineChart.lookupAll(".chart-vertical-grid-lines");
                for (Node n: nodes) {
                    Path p = (Path) n;
                    double currLayoutX = p.getLayoutX();
                    p.setLayoutX(currLayoutX + (Delta*-1) * xScale);
                double lox = xAxis.getLayoutX();
            rectinitX.set(mouseEvent.getX());
public static void main(String[] args) {
    launch(args);
}Any help very much appreciated!

My iphone4 today suddenly froze today I did a lot of tries by pressing the lock button(long press) and pressing home button and lock button together( long press) but it is not starting. It's 7.1.1 and iPhone 4

My iPhone4 suddenly froze today. I did a lto of tries to start it by pressing the lock button(long press) and by pressing the home and lock button together(long press)but it doesn't work. It's an iPhone4 iOS 7.1.1. How to restart it?

Hi there Arpit gaba,
I would recommend taking a look at the troubleshooting steps found in the article below.
iOS: Not responding or does not turn on
-Griff W.

Display separated after drop. Can it be glued and snapped back together?

MacBook Pro Late 2008 - Glossy Graphics display.
Dropped it on carpeted stairs and it separated in the corner.
The display still works, It closes tight with the display is all the way open, just
when I close it you can see it separated in the left bottom corner.
Appears that there are plastic and metal snaps.
Can this be glued and snapped back together or should I replace the clam shell glossy graphix display?
How much does replacing the display cost, anyway?

The best thing to do would be to take it by an Apple Store or AASP and ask. If it can be re-glued, then I expect you would need to use the exact right glue. If it can just be snapped back, then Apple or the AASP would know how best to proceed.
Apple or the AASP would be able to quote you a price on replacing the display. If you want to try it yourself, you can find parts and instructions on ifixit or PowerBook Medic.
It's probably worth a shot at repairing the display. Replacing it is always an option if a repair doesn't work.
Good luck!

Has anyone had success using SharePoint and FrameMaker 10 together using CMS?

Has anyone had success using SharePoint and FrameMaker 10 together using CMS?

Thanks for reminding to at least update the results thus far.
Update 4:
I did get quite a bit of support initially although slowly over a period of a month or so. After Adobe FM support and my SharePoint systems engineer reviewed how FM10 was setup on my computer (which I am the admin for our department’s SP site) and how it interfaces with our SharePoint 2010 Enterprise Edition, there was two conclusions:
Basically Adobe FM Support said that FM10 did not support claims-based authentication and they can no longer help me. They said it will work with FM11 when it comes out.
My SP Systems Engineer, said that FM10 is connecting to SP 2010 just fine but that the FM10 has a software glitch that causes FM10 lose control when executing checkout procedure within FM10. I can checkout and edit that same file in SP with no problems.
About a month later, I upgraded to FM11 and ran into the same problem. I attempted to get Adobe FM Support to help and they said they will look into and get back to me. That was in July and I have not heard anything more from them, and to be honest, my schedule has been extremely busy the last 5 months that I have not had time to pursue it any further.
Needless to say, I was very disappointed with the SP interface and, overall, the lackluster support I received from Adobe. Having a working SP interface was one of the criteria for purchasing TCS3.5 (and subsequent upgrade) in the first place.
One thing of note, we migrated from SP 2007 to SP 2010 in February 2011 and, at the time of Adobe support, I still had access to my SP 2007 site. FM10 and FM11 had to no issues working with SP2007. Unfortunately, SP 2007 is not an option for me anymore.
Also, another observation of FM10/11 not working with SP 2010, it seems that FM10/11 is automatically configured to work with SharePoint Drafts folder locally when connecting to the SharePoint library. This worked just fine with SP 2007 but SP 2010 does not use SharePoint Drafts folder locally the same way (the programming changed, don’t recall where I saw it, probably when searching this issue online) and I suspect that is one of the main issues why it does not work correctly.
So at this time, I have not found a working solution to this problem.

Does Caringorm and Flex4 go together?

Similar Messages

Maybe you are looking for