Does CB-68LP I/O connector need +5v power?

Hi,
I am using CB-68LP I/O connector with PCI-6024E DAQ board to meassure some current change. I noticed there is a pin called '+5v' on CB-68LP I/O connector. Does that mean i need a +5v power that makes DAQ work? If so, how can i connect this pin?
Tks

Hi ppl,
Check that pin (with the cables connected and the machine turned on) with a volt meter. It should be the +5 volts FROM the DAQ device. This line is generally fused so if you do not measure anything on this line, the fuse may already be gone.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Similar Messages

Does the Zen Sleek docking station NEED a power adapt

I already have a docking station for my Zen Sleek which is connected to my PC.
I would like to get another one for my hi-fi downstairs so that I can take advantage of the line out socket. Does the dock need power to provide the line-out socket so am I going to have to sort out a second power supply as well?
If I do need a second power supply, would it be ok to just buy a uni'versal power supply (providing the current is sufficient) and plug that in, which would be cheaper than a Creative OE one?
Thanks in advance. The Sleek rocks!Message Edited by manoman48 on 06-27-2006 03:55 AM

The battery pack for the V200 is a different size/shape to the one for the TX, NX, TX FM etc. More important I suppose is whether the actual MP3 module is the same size or not; whether the V200 module will fit in the TX battery compartment or not.
Creative's official answer will probably be that they are different. On first looks they appear different but someone with both players might be able to give you a better answer.
PB

HT202157 Why does my apple TV say it needs hdcp compatibility. It never said that before. Now my apple tv is not working.

Why does my apple TV say it needs hdcp compatibility. It never said that before. Now my apple tv is not working.

Hello Rickpoulette,
The following article provides further information and could very well help get your Apple TV and your television cooperating again.
If HDCP authentication does not succeed, you may see one of the following symptoms:
A message may appear on your television stating "This content requires HDCP for playback. HDCP isn't supported by your HDMI connection."
You may see periodic bands of static, or full screen static, flashing across your TV screen.
If you are experiencing either of the symptoms above, try playing the same content again for at least another 10 seconds. If the issue persists, try the following steps until the issue is resolved:
Connect your Apple TV (2nd generation) directly to your HDTV using an HDMI cable.
Set your Apple TV and HDTV to off or sleep mode
From the Apple TV interface, select: Settings -> Sleep Now.
Turn off your TV and wait for about 10 seconds.
Turn your TV back on.
Press the Select button on your Apple TV remote to wake your Apple TV.
Some HDTVs may need a firmware update. Consult your TV manufacturer's user manual or online support pages for additional information about how to update your TV's firmware.
If available, try using a different HDMI to HDMI cable, such as an Apple HDMI to HDMI cable, directly between your Apple TV (2nd generation) and 720p HDCP-compatible HDTV.
Apple TV (2nd generation): About Apple TV and HDCP
http://support.apple.com/kb/HT4428
Cheers,
Allen

Received ipad2 synced to itunes and uploaded my backup, now I find out it does not have WiFi 3G and need to return it, is there a way of getting all of my data off the ipad2?

Received ipad2, synced to itunes and uploaded my backup from my Ipad, now I find out that it does not have Wi-Fi+3G, need to return it, is there a way to get my data off the ipad2 so I can return it?

if you mean restore it to factory default then you can choose that while having it connected to the computer and using itunes

I have recently upgraded from my iphone 5 to a new phone. My iphone 5 's touch screen does not work anymore. I need to backup my phone, but I can't do it on itunes without my password. Everything besides screen is ok. Is there a way around it? :(

I have recently upgraded from my iphone 5 to a new phone. My iphone 5 's touch screen does not work anymore. I need to backup my phone, but I can't do it on itunes without my password. Everything besides the screen is completely fine-the screen will not recognize my finger anymore. I am not trying to fix the phone, but I need to have my contacts. The pictures have already synced, but I need my password to do a full backup. Unfortunately, I can't type in my password. Is there any way around it? If I take my phone to the apple store, will they be able to help me? I am not willing to replace the screen just to do this, however, so that is out of the question.

Someone else may have a workaround, but, as far as I know, if you cannot interact with the screen on the iPhone, there is no way to unlock it so you can get to your contacts.
Were you saving them to iCloud by chance? If so, you can restore them to your new phone.
~Lyssa

Does an external hard drive ALWAYS need to be connected to my mbp with retina display for Time Machine?

Does an external hard drive ALWAYS need to be connected to my mbp (OS 10.10.1) with retina display for Time Machine? Or can it be connected once a week or whenever I want? I used to have an external drive always connected to my previous mbp, but it made moving my mbp around a bit of a hassle with it connected...

When the backup drive is not connected, some of the free space on the internal drive will be used to make local snapshots, which are backup copies of recently deleted files. Local snapshots will protect you from unintended file deletions, but not from a drive failure. You should only go as long between backups as you're willing to lose data. If losing a week's worth of work is acceptable to you, then that backup frequency is OK. Otherwise, it isn't.

I updated to ios 5.1.1 and added icloud services. the problem is now whenever i connect my iphone to my PC, itunes does not recognize my phone. i need it to but it just does not connect..

i updated to ios 5.1.1 and added icloud services. the problem is now whenever i connect my iphone to my PC, itunes does not recognize my phone. i need it to but it just does not connect..

Try the standard fixes to rule out a software problem:
- Reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory defaults/new iPod.
If you still have the problem that points to a hardware problem. Yu can make an appointment at the the Genius Bar of an Apple store or try:
fix for Home button

I follow the instructions of swiping up from the bottom for the control panel, but nothing appears. What am I doing wrong or what do I need to be turned on or off?

I follow the instructions of swiping up from the bottom for the control panel, but nothing appears. What am I doing wrong or what do I need to be turned on or off?

"If you're on your home screen, where your apps and folders are, you can't."
I can on mine.
For anyone having this issue, take your device out of the case and try it naked before trying a reset, restore or Genius Bar appointment.

I am getting a message - the iphone can not be used because the apple mobile devise service is not started - what does this mean - what do i need to do?

i am getting a message - the iphone can not be used because the apple mobile devise service is not started - what does this mean - what do i need to do?

See Here... http://support.apple.com/kb/TS1567

HT4623 I updated my iphone to the new version and now it tells me to connect to itunes which I did and it's not doing anything else, what do I need to do?

I updated my iphone to the new version and now it tells me to connect to itunes which I did and it's not doing anything else, what do I need to do?

Try to connect in recovery mode, explained in this article:
iOS: Unable to update or restore

Just updated itunes now menu bar has dissapeared no black and white box at top left and ctr b does not bring anything up. i need file view etc please help driving me crazy

just updated itunes now menu bar has dissapeared no black and white box at top left and ctr b does not bring anything up. i need file view etc please help driving me crazy

Is the iTunes window in FullScreen mode?
If so, press esc key.

While doing ODI migration what things are needed to be setup in Topology?

While doing ODI migration what things are needed to be setup in Topology manager ?
1.Like in Toplogy in file we hive file paths.
2. In Planning we set Logical schema .
Not sure about other things.
Hoping some can can help!!!!!!!!!!!!!!!11

Lots of things are defined in the topology manager - below is a simplified list
1) Physiccal Schemas the actual connection information / details related to any technology you plan to use in your ODI integration interfaces
2) Logical schema, abstracted version of the Physical schema which allows greater flexibility ad reuse across environments
3) Contexts - how you asssociate logical and physical schemas
4) Agents - manage the execution of ODI jobs
When you talk about migration, do you mean moving ODI objects between seperate environments such as Dev and Prod? If so you will need to ensure that all the technologies you use in Dev are present in Prod. The physical layer has been set up with all the correct connection details. Your logical scemas has been set up matching your configuration in the dev environment and you have used the contexts to associate the logical and physical layers as per your dev configuration.

Hi, my ipod (2nd gen) won't connect to the internet via Safari or through apps but my email does work. Any ideas without needing to reset the ipod?

Hi, my ipod (2nd gen) won't connect to the internet via Safari or through apps but my email does work. Any ideas without needing to reset the ipod?

- Have you tried when connected to other networks? Maybe the router is blocking the ports used by Safari and the other apps.
- What kind of network are you using? a personel or bussines?

The earphone port on my ipod touch 4 does not work anymore, will I need to send it in for repairs?

The earphone port on my ipod touch 4 does not work anymore, will I need to send it in for repairs?

Apple will exchange your Pod for a refurbished one for:
Apple - Support - iPod - Repair pricing
A third-party place like this one is less expensive. Google for more places.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

Does my Macbook Air 13 inch need to be replaced?

Does my Macbook Air 13 inch need to be replaced if it only gets 5 1/2 hours of battery (by just surfing the web) and I just purchased it?
The only reason I got the 13 inch was because it had a better battery life over the 11. I can't imagine the 11 inch getting 3 hours or somethings that's ridiculous.

There are a lot of things that affect battery life. Flash Player is a major culprit in decreased battery life. Watching streaming video is another. Check out "Click To Flash". Helped me a lot. I have the late 2010 MBA 13 with SnowLeopard (no Lion) and average 7-9 hours of battery life.
Sly

Does CB-68LP I/O connector need +5v power?

Similar Messages

Maybe you are looking for