Does CC allows the saving of .psd or.indd in lower versions than CS6 ? (just like Illustrator-)

If I can't save my files in lower versions than CS6, my clients and printers will HAVE to update to CC too, though they don't need this up to date versions to work.
For example saving a file from InDesign CS5 in order to open it with CS3 is a real challenge and forces you to own the CS4, as you can't skip a version…
Will this kind of issues is being studied for the CC ?
Thanks for your answer
Olivier

It varies from application to application. To use a file created in ID CC with ID CS6, you need to export that file in .idml format. Saving files in .indd format will not open in ID CS6.
As far as Photoshop is concerned, you can use a psd file created in PS CC with PS CS6.

Similar Messages

Farm Remote App 2012 R : Your system administrator does not allow the use of default credentials to log on to Work Resources

Hi
Here is the situation:
I have a Farm with 3 servers W2012R2 in a Domain
Server1                           Server 2
Server3
RDSession Host            RDSession Host
RDSession Host
Connection Broker        Connection Broker (Passive)
RD Web Access
2 DNS Alias : - poc.mydomain.local (Use for the RD Web Access and points to Server1
                  -poccb.mydomain.local (Use for the Connection Broker and points to Server1)
I have setup the Connection broker in HA with Server2 as Passive Server : DNS Round Robin poccb.mydomain.local (Server1)
The certificate Manager has generated 2 CA certificates :
- 1 for the RD Web Acc (poc.mydomain.local
-1 for Connection Broker SSO and for publishing
I have created 1 Group Policy for these 3 servers and 1 GP for my client Windows 7 SP1.
Server GPO :
Computer/Administrative Templates/Windows Components/Remote Desktop Services/Remote Desktop Session Host/Security
Always prompt for password upon connection=Disabled
Require use of specific security layer for remote (RDP) connections : SSL (TLS 1.0)
Set client connection encryption level : High Level
Client GPO
Computer/Administrative Templates/System/Credentials Delegation = Allow delegating default credentials (Concatenate OS defaults with input above)
TERMSRV/POCCB.mydomain.local
I use no Gateway and in my collection,I have activated SSL (Like in my Server GPO)
I have now problem with SSO.
Connection with remote desktop client with server name = poccb.mydomain.local
Your system administrator does not allow you the use of default credentials to log on to the remote computer poccb.mydomain.local because its identity is not fully verified
If in my client GPO I add the physical name of the 3 servers, it works :
TERMSRV/Server1
TERMSRV/Server2
TERMSRV/Server3
Open RDP Files with server name = poccb.mydomain.local
if my connection broker connects me on Server1 , no problem
But If I arrive on Server2 & Server 3=
Your system administrator does not allow the use of default credentials to log on to Work Resources
I have searched on internet. No result for " to log on to Work Resources"
Any idea ? Thanks for your help

Hi,
Thank you for posting in Windows Server Forum.
Firstly check that, your user is using domain\username to enter the credential in the dialog box.
Now for a try, you can edit .rdp file with notepad and just place “enablecredsspsupport:i:0” line in it, save it an launch to check whether you are facing same issue.
As you are using windows 7 then upgrade to RDP 8.1. Also as you have already enter the FQDN name of server under “Allow delegating default credentials”. For a try please enable and configure for all the remaining settings as follow and check the result.
Start / Run / gpedit.msc / Computer Configuration / Administrative Templates / System / Credentials Delegation, and make sure you have the following four options enabled and configured:
Allow Delegating Default Credentials with NTLM-only Server Authentication
Allow Delegating Default Credentials
Allow Delegating Saved Credentials
Allow Delegating Saved Credentials with NTLM-only Server Authentication
Finally, open a command prompt and use “gpupdate /force” command to apply the policy directly.
More information:
Remote desktop credentials did not work
Hope it helps!
Thanks.
Dharmesh Solanki

I want to mirror an iOS device to my computer for demonstration and training purposes. I cannot use Airserver as my company VPN does not allow the connection. Is there a hardware solution instead?

I want to mirror an iOS device to my computer for demonstration and training purposes. I cannot use Airserver as my company VPN does not allow the connection. Is there a hardware solution instead?

Shoeb, hi.
Thanks for replying and apologies for my tardiness in responding. I have just completed a re-creation of my web page using CSS/HTML rather than XML/XSLT and now I find that when saving in MHT format the watermark/background image is saved, which is nice, but trying to save it as 'webpage complete' under 'save as' in the browser still does not work. (For those who are new to Firefox, MHT files are not supported by the browser, but using the FF extention UnMHT one can open such files and save web documents as MHT files, meaning no accompanying folder is required to properly view the file.)

I am trying to stream via ESPNWatch but I get a message saying I have a popup blocker that does not allow the streaming to happen. I unchecked the pop up blocker box in the Safari preferences to no avail. Any ideas?

I am trying to stream via ESPNWatch but I get a message saying I have a popup blocker that does not allow the streaming to happen. I unchecked the pop up blocker box in the Safari preferences to no avail. Any ideas?

Might be a Safari extension...
From your Safari menu bar click Safari > Preferences then select the Extensions tab.
If there are any extensions installed, turn that OFF, then quit and relaunch Safari to test.

When the Wifi is connected, the iphone seems to search for some site and if firewall does not allow the access to that site, it disconnects the connection to Wifi. Can anyone help on this?

When the Wifi is connected, the iphone seems to search for some site and if firewall does not allow the access to that site, it disconnects the connection to Wifi. Can anyone help on this?

Hi SBEG2015,
I'm sorry to hear you are having these issues with your iPhone. Based on your description of what has happened and the symptoms you are seeing, you may need to have your iPhone evaluated and/or serviced. You may find the following page helpful:
Apple - Support - Service Answer Center
Regards,
- Brenden

When trying to customise-organise the Firefox 17 does not allow the bookmarks toolbar to be placed above the tabs toolbar is there a solution other than reverti

When trying to customize-organise the Firefox 17 does not allow the bookmarks toolbar to be placed above the tabs toolbar is there a solution other than reverting to a previous version of FF?

# Type ''about:config'' in the address bar and press Enter.
# Press the big button to bypass the warning.
# In the search box, paste ''browser.tabs.onTop''
# In the search results, double-click ''browser.tabs.onTop'' to set its value to '''false'''.
Note: If you're using either Windows 7 or Vista with an Aero Windows theme, performing the above will make a large part of the Firefox window glassy. If you find this unpleasant, the simplest thing to do is to install a persona.
* https://addons.mozilla.org/firefox/personas/solid

HT1725 I have tried to download the podcast "Ab Trimmer" from Exercise Tv and it does not allow the download to be completed. Comes up with Unable to Download podcast prompt. I now just want this to be moved from my download list, how do I do this?

I have tried to download the podcast "Ab Trimmer" from Exercise Tv and it does not allow the download to be completed. Comes up with Unable to Download podcast prompt. I now just want this to be removed from my download list, how do I do this?

The fix was to completely remove all Apple Software following guides in previous posts.
Then download and re-install latest iTunes 64-bit, making sure to Run As Administrator.
This fixed it. Now the next thing seems to be that as I move from one device to another to close and restart iTunes between each one. Treat it gently. It seems to break easily and a lot.

I added exceptions for the pop up blocker but most of the time it still does not allow the pop ups for the sites I listed as exceptions

the pop up blocker is inconsistent. i added websites to the exceptions list but most of the times when i load firefox it does not allow the exceptions...sometimes it does but i can't find any reason or consistency as to why it sometimes allows them and sometimes doesn't. They are clearly listed on the exceptions option.
What is wrong?

<blockquote>Locking duplicate thread.<br>
Please continue here: [[/questions/945652]]</blockquote>

When try to connect my iPod touch 4th gen to my house Wifi it won't connect, it used to work fine but now it dosen't work, but it does say that the internet is available, but when I tap on it it just loads. all other devices work fine.

When try to connect my iPod touch 4th gen to my house Wifi it won't connect, it used to work fine but now it dosen't work, but it does say that the internet is available, but when I tap on it it just loads. all other devices work fine.

Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

HT1430 my ipad has gone dead. I tried holding the sleep/wake button down until the red slider appears but it never does. By the way this a refurbished unit I purchased from Apple and just received it yesterday.

My ipad has gone dead. I tried holding the sleep/wake button down until the red slider appears but it never does. By the way this a refurbished unit I purchased from Apple and just received it yesterday

Try reset all settings
Settings>General>Reset>Reset All Settings
Note: Data will not be affected but settings will be reset.

I own both Photoshop Elements and Photoshop (the original editor). I find the elements editor to be too cumbersome to use and would just like to edit using Photoshop. When I try to install Photoshop as a secondary editor in elements I get an error messa

I own both Photoshop Elements and Photoshop (the original editor). I find the elements editor to be too cumbersome to use and would just like to edit using Photoshop. When I try to install Photoshop as a secondary editor in elements I get an error message that I don't need to this because it is already supported on the edit menu and task bar. I can not find any way to send images to Photoshop for editing - all I can do is send them to elements editor or the premier editor. Can someone tell me how to send them to Photoshop? Thanks!

Hi,
The D810 requires Camera Raw 8.6 or later - the latest version that is compatible with Photoshop Elements 12 is Camera Raw 8.5 as far as I can see.
You need to either buy a new version of Photoshop Elements or use the free Adobe DNG converter.
DNG Converter 8.8
Win – http://www.adobe.com/support/downloads/detail.jsp?ftpID=5888
Mac – http://www.adobe.com/support/downloads/detail.jsp?ftpID=5887
Useful Tutorial
http://www.youtube.com/watch?v=0bqGovpuihw
Brian

Hey is the new update going to let people facetime more than one person like 3-way? you'd think apple would have done this by now

hey is the new update going to let people facetime more than one person like 3-way? you'd think apple would have done this by now

If there is we will not learn about until the update is released. Speculation about such is not permitted in the forums.

I just purchased a wireless connection for my Tivo but the signal strength from my airport express does not allow the tivo to load data. How do I increase the signal strength?

I just purchased a wireless N network adapter for the TIVO premier and am trying to use my apple airport express to connectand it is in the another room. I am only receiving one bar of strength on my network adapter. How can I raise the signal strength of my airport express.

There are several things that might help, not all of which would be feasible depending on your situation: (1) Move the TiVo unit and AirPort Express closer together. (2) Use another AirPort Express to "extend" the network of the first AirPort Express. Put the second AirPort Express half way between the first AirPort Express and the TiVo unit. (3) In the general case, Power-Line equipment might allow the TiVo unit to get a good signal, but it's likely that the Ethernet port of your AirPort Express is probably connected to your broadband modem, so that solution wouldn't work for you. (4) Changing the band or channel that the AirPort Express is using might help. If the TiVo unit is connection on the 5 GHz band, try one of the three-digit channels, which are allowed to use higher power.

HT1222 When there is a browser update like this Safari 5.1.4, Is there an article that instructs one the ideal way to update to a newer version of a browser like this newer version of Safari? Is it best to close Safari and all other apps, restart...

When there is an update to a newer version of a browser like this update to Safari 5.1.4, is there an article that goes over the best way to update to a newer version of a browser that one knows of? Is it best to close all apps, install the update, turn the computer off, turn it on and hold down the shift key until the gear and progress bar are showing, when this is finished, do a restart of the computer. I hav always wondered the best way (if there is a best way) to update to a newer version of a browser so you avoid potential problems. Is there a Support Article that goes over installing and updating to a newer version of one's browser, in this case Safari?
Thanks.

The following may or may not apply to Lion:
Repairing permissions is important, and should always be carried out both before and after any software installation or update.
Go to Disk Utility (this is in your Utilities Folder in your Application folder) and click on the icon of your hard disk (not the one with all the numbers).
In First Aid, click on Repair Permissions.
This only takes a minute or two in Tiger, but much longer in Later versions of OS X.
Background information here:
http://support.apple.com/kb/HT1452?viewlocale=en_US
and here:
http://docs.info.apple.com/article.html?artnum=302672
An article on troubleshooting Permissions can be found here:
http://support.apple.com/kb/HT2963
By the way, you can ignore any messages about SUID or ACL file permissions, as explained here:
http://support.apple.com/kb/TS1448?
If you were having any serious problems with your Mac you might as well complete the exercise by repairing your hard disk as well. You cannot do this from the same start-up disk. Reboot from your install disk (holding down the C key). Once it opens, select your language, and then go to Disk Utility from the Utilities menu. Select your hard disk as before and click Repair.
Once that is complete reboot again from your usual start-up disk.
More useful reading here:
Resolve startup issues and perform disk maintenance with Disk Utility and fsck
http://support.apple.com/kb/TS1417?viewlocale=en_US
For a full description of how to resolve Disk, Permission and Cache Corruption, you should read this FAQ from the X Lab:
http://www.thexlab.com/faqs/repairprocess.html
Apple's advice on general maintenance:
http://support.apple.com/kb/HT1147?viewlocale=en_US

Round trip to PS CS3 does not show the saved image in Aperture 2.1.1

Good evening everyone; I hope someone can help me to solve this.
I have PS CS3 set as my external photo processing app (exports are PSD 16-bit 300 dpi) in Aperture 2.1.1. When I process the picture in CS3 and then save it(mind you I only SAVE, I do not do SAVE AS) as PSD (or TIFF) Aperture only shows me the original file in preview with the little circle informing me about the round trip to CS3. So the processed file does not show. Instead I only see two identical versions of the same photo.( I mean, I see the master and the version with the little circle).
If I save the work in PS CS3 as jpeg and then import into Aperture, it shows fine. When trying to import the processed and saved PSD and TIFF files, Aperture only shows the original file.
If it helps, I am working on layered pictures (HDR) where I use different parts of different pictures to get wide dynamic range. I export 3 or so photos from Aperture at once to CS3, process them into one, flatten the picture and save it.
And then Aperture just shows me the original file as version.
I have done this before 2.1.1 and it worked. Not sure if I have changed anything that might be causing this.
Thank you for your ideas.

I am sure it is not stacked under the original, unfortunately. Any other tips?
Also, as I mentioned earlier, even if I save the processed file in CS3 as PSD (so I use SAVE AS) and then try to import it into Aperture, it "magically" only shows the orginal (as if it was just importing some layer).

Does CC allows the saving of .psd or.indd in lower versions than CS6 ? (just like Illustrator-)

Similar Messages

Maybe you are looking for