Does CCM need separate server?

we just started implementing SRM 4.0 (will go with 5.0 once it's released). we are wondering if we need to put CCM on separate server as SRM server. do people normally put SRM/CAT on one server and CSE on another or put SRM on one and CAT+CSE on separate one? what's the pros and cons and how to decide?
Thanks
Jane

Hi Jane,
Yes, you can very well install both the components i.e. EBP and SRM on single server.
The installation on single or different server depends upon the load of catalogs to be handled(this is one criteria , there may be others)
pl. read CCM config guide for better insight in installation.
BR
Dinesh

Similar Messages

FIori Application on Portal, does we need gateway server?

Hi All
My company starting SAP FIORI implementation.
Upgradation of gateway server on 740 going on.
Also
same time upgrading Portal from 7.0 to 740.
Also
i heard about FLP on EP.
So
My question
1) it is possible to implement SAP FIORi apps on portal? (might be yes)
So
2) Does we need gateway server for this?
How it will work..
Tags edited by: Michael Appleby

i gone through
How to integrate SAP Fiori apps into your Mobile Portal
seems need gateway server.
but quite confusing...
if SAP provide ESS MSS (sca) packages for Portal.
Why not sca file for SAP FIORI apps. so not need gateway server.
might be for security resion.

Does ipad2 need separate sim account with telstra in Australia

Wondering if I need to get a sim card (with a separate account or the same one) or use the personal hotspot on the iphone 4

If you have the ATT type 3G iPad with the removable micro-sim, you can either get the microsim or tether the iPad with the iPhone 4, as long as the iPhone has the newer iOS installed and you have your data service upgraded to tethering.

What does Empirix need to run on

does it need a server? if so what are the requirments of that server? how easy is it to set up and configure?
thks.
scott

e-Tester has the following system requirements:
Operating System: See Operating Systems Supported.
Recommended Memory: Minimum 256 MB; 512 MB recommended
Disk Space: 300 MB (larger recommended).
System: IBM-compatible PC with Pentium III processor or better
Microsoft Excel recommended for International system installations.
e-Load has the following system requirements:
Operating System: See Operating Systems Supported.
Recommended Memory: Minimum 512 MB; 1 GB recommended
Disk Space: 300 MB (larger recommended).
System: IBM-compatible PC with Pentium IV 1.5GHz processor or better
Microsoft Excel recommended for International system installations.
Browsers: Internet Explorer 5.5 or higher
e-Manager Enterprise has the following system requirements:
e-TEST suite be installed
Operating System: See Operating Systems Supported.
Recommended Memory: Minimum 512 MB RAM (1 GB or higher recommended)
Disk Space: 150 MB (larger recommended).
System: IBM-compatible PC with Pentium III processor or higher recommended.
For Web client: Microsoft Internet Explorer 5.5 or higher is required.
Microsoft Excel recommended for International system installations.
Note: If you have a large database and/or are deploying e-Manager Enterprise for a team greater than 10 users, the amount of disk space and memory required for the server will increase. If this is the case, you should consider deploying e-Manager Enterprise on a server class machine with minimum of 1GB RAM recommended.
The e-TEST suite 8.20 is supported on the following:
IE 7 Support ? e-TEST suite 8.20 now fully supports Internet Explorer 7.0 for e-Tester, e-Load and e-Manager Enterprise.
Windows Vista Support ? e-TEST suite 8.20 can now be installed and run on Windows Vista operating system.
SQL Server 2005 Support ? e-Load and e-Manager Enterprise can now be used with SQL Server 2005 as the back-end data repository.
Windows 2000 (SP1 or higher recommended)
Windows XP
Windows 2003
Windows NT 4 SP6 (*not recommended; Windows 2000, XP or 2003 preferred)
The e-TEST suite supports double-byte characters (DBCS) for internationalization

Does Deployment Optimizer need a separate server?

We just finished blue-print and came to a conclusion to use SNP Heuristics and Deployment Optimizer. Since we are not using SNP Optimizer, my question is that should we need a separate server?
I did not find any quicksizer document for Deployment Optimizer however, I could see for SNP Optimizer though.
Any help would be appreciated.
Thanks,
C.A.

Any Optimiser (SNP / Deployment / PPDS / TPVS / CTM) will need Optimiser Server connection as the Optimiser Routines are .exe files requiring a Windows-based hardware with sufficient Main Memory (RAM).
Deployment Optimiser will be part of SNP Optimiser Engine.
Somnath

SharePoint 2013 workflows for SPD - need a separate server to run workflow engine?

Hi there,
I have a single machine dev installation of SharePoint 2013. How to have SP 2013 Workflows done in SharePoint Designer - so we can migrate them from one environment to the other without having to make manual changes again.
Does this need any special software installed? Can we install it on our APP server?
Thanks.

Hi Frob,
If you want to be able to move workflow manager to another environment, then you need to install the workflow manager in a separate server.
When you want to use the workflow manager in another environment, you need to leave the workflow manager from the existing farm.
And then join the workflow manager to the farm where you want to use the workflow manager and also re-register the workflow service.
Here is a similar issue for you to take a look:
http://sharepoint.stackexchange.com/questions/132524/move-workflow-manager-to-new-farm-in-a-new-domain
More references:
https://msdn.microsoft.com/en-us/library/jj193527(v=azure.10).aspx
https://msdn.microsoft.com/en-us/library/jj193433(v=azure.10).aspx
Best regards,
Thanks
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

I've only had my iphone 5s for a week. I keep getting an error message of "Server has stopped responding." I need the server to work. Does anyone know if there is a "fix" for the problem? Other wise, I probably best return for a refund and get a Samsung.

I've only had my iphone 5s for a week. I keep getting an error message of "Server has stopped responding." I need the server to work. Does anyone know if there is a "fix" for the problem? Other wise, I probably best return for a refund and get a Samsung. Thanks

sandyzotz wrote:
Other wise, I probably best return for a refund and get a Samsung.
Unlikely. Based on the complete lack of detail of the issue provided it is entirely possible the same issue would occur.
Unless and until the user provides some actual details of the problem, there is nothing the indicate that the issue is with the iPhone.

Reporting Services Add-in for Sharepoint- does it need an SQL Server license?

In a new project we will be creating an SSRS in Sharepoint integrated mode. For this we'll need SQL Server and Sharepoint on that box.
We'll also have one or more SharePoint Web Front End (WFE) servers. To allow them to connect to the SSRS-in-sharepoint-mode box, and to present the user with the right user interface for doing so, I believe we can install the Reporting Services Add-In for
Sharepoint on the WFE servers.
The question is, do we need to have SQL Server license for each WFE server where we use the Reporting Services Add-In, or is it free to use?
We've had advice that we need to buy a SQL Server license everywhere we use the add-in, but I am not sure this is correct.
Thanks in advance,
Rich

Hello there,
The Reporting service Add-in for SharePoint can be downloaded free on Microsoft Download site. That means it does not need any license on the add-in.
Regards,
Edward
Edward Zhu
TechNet Community Support

Do we need separate Unattended service account for each SharePoint Server 2013 BI service applications?

SharePoint 2013 - I'm planning to use 'unattended service account' method of Secure Store Service - for Excel, Performance Point and Visio services. I'm about to create Active directory accounts for them.
Question: Do we need separate Active directory accounts for each service
DomainName\ExcelUnattendedAccount
DomainName\PPSUnattendedAccount
DomainName\VisioUnattendedAccount
(or)
Can I have just one Active Directory account DomainName\SharePointUnattendedAccount ?
Are there any drawbacks having a single account? Any best practice around this? For all the three services the data sources are going to be the same.
Subash.S

Security is the only reason you would separate accounts (as these accounts must have access to the source data). There should be no other drawbacks.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Does PI need a direct connection to third party or can work with a proxy server based connection to third party?

does PI need a direct connection to third party or can work with a proxy server based connection to third party?

Hi,
It basically includes 3 systems, one is our ECC sender system, middle one is PI box and third one is the receiver system. Data is successfully reaching to PI system from our sender system.Now we want to forward this to our third party system from PI box.
I want to know that such sending of data requires direct connection to third party or it can be done by proxy server based connection to third party.If it is possible then what are the steps to do this?
Regards-
Anuj Nogja

Hearing aid that does not need a separate bluetooth streaming device

hearing aid that does not need a separate bluetooth streaming device

I believe any "Made For iPhone" hearing aid. More information: http://www.apple.com/accessibility/ios/hearing-aids/
The bottom of that link has a list of "Compatible Devices"
Following is one:
http://www.starkey.com/hearing-aids/technologies/halo-wireless-hearing-aids

Does BC4J needs an Application Server?

Is it possible to use BC4J without an Application Server?

Gabriel:
If your client is HTML browser, you need an App Server (servlet container).
If your client is not HTML, e.g., JClient, you can run in the local mode. In that case, you don't need App Server.
Thanks.
Sung

Is it possible to take the CDR data from a v4.2 Call Manager and copy it to a separate server where it would be made available for reporting?

Is it possible to take the CDR data from a v4.2 Call Manager and copy it to a separate server where it would be made available for reporting? We are not interested in migrating the CDR data to v6 because of the concerns it introduces to the upgrade process. Is it possible to get the raw data and somehow serve it from a different machine? (knowing it would be 'old' data that stops as of a certain date). If so, what would be the complexity involved in doing so?
It seems like the CDR data lives within MSSQL and the reporting interface is within the web server portion of the Call Manager... that's as far as we've dug so far.

Hi
It is absolutely possible to get the data - anyone you have in your org with basic SQL skills can move the data off to a standalone SQL server. This could be done most simply by backing up and restoring the DB using SQL Enterprise Manager.
Moving the CAR/ART reporting tool would be more difficult... if you do actually use that for reporting (most people find it doesn't do what they need and don't use it for anything but basic troubleshooting, and get a third party package) then the best option may be to keep your publisher (possibly assigning it a new IP) and leave it running for as long as you need reporting.
You would then need a new server to run your upgraded V6 CCM; you may find you need this anyway.
Regards
Aaron
Please rate helpful posts...

FMS on Amazon Web Services License. Does it need enter License(Serial Key)?

FMS on Amazon Web Services License. Does it need enter License(Serial Key)?
After Subscribe on adobe.com(Adobe Flash Media Server 4.5 on Amazon Web Services)
I build the Amazon EC2 successfully.
In amazonpayments, the amazon show me an Activation Key.
On Application Activation:
The screen give me following information.
Generate an Amazon Activation Key
An activation key may be required as part of an application's registration process. If your application requires it, follow the steps below:
Step 1: Click on the Generate Key link to generate an activation key for an application.
Step 2: Copy the activation key.
Step 3: Click on Go to Application to access the application.
Step 4: Paste the activation key if and where the application specifies.
But in Adobe Flash Media Administration console, It is missing the License(Serial Key)
Does it need enter License(Serial Key)?
How can I use the Activation Key?

Hi,
This Activation Key is only for identification purposes. In most cases, you will not have to use it. Once you subscribe to FMS on AWS, you are ready to go and use FMS AMI's.
Also, FMS on AWS does NOT require any License or Key. It works on a separate Licensing model.
Thanks!

CCMS: where does CCMS collects the database space information from?

Hi,
We are experiencing a kind of inconsistency in the data that CCMS is collecting for the space tablespaces related MTE's. Here is the thing:
- RZ20 > SAP CCMS Monitoring Templates > Database : will show the PSAPSRQ tablespace at 94% (which is wrong)
- DB02 will show the same tablespace at 88% (which is the correct value)
- BRSPACE will also show the 88% (the correct value)
Note that CCMS is do active and collecting (the value is not obsolete as you can actually see the timestamp being updated for the respective used space MTE).
Do you know why are we seeing this inconsistency? Where does CCMS collect the tablespace information and how often?
Any ideas or help to avoid this inconsistency will be helpful, as basically CCMS is sending us false alerts/emails.
Thanks and regards

Jesus,
I just came across this issue myself after assuming that I was collecting the correct data. The problem is that SAP is collecting the column Total Used (%) in DB02 instead of Used (%). You should see your 94% as reported in CCMS in the Total Used column in DB02.
What we need is the Used (%) column which is much more critical than the Total Used (%).
I have not found an MTE to report this data. Until then, we have to manually check every server for Tablespace levels instead of in our Central CCMS.
If you have a solution, please send.
Thanks,
Jeff

Does CCM need separate server?

Similar Messages

Maybe you are looking for