Does Change to DESADV (ZXTRKTOP,ZXTRKU0) userexit has any impact on SHPCON
Hi All,
I need your help on clearing my doubt.
I recently create a new extended DELVRY03 idoc (ZDELVRY03) with message type DESADV and added new segment under E1EDL24 with contains prodcution date field. Def. logice in user eixt EXIT_SAPLV56K_002 includes ZXTRKTOP& ZXTRKU0.
Does changes to this idoc with message type DESADV has any impact on SHPCON message type with idoc DELVRY03(basic idoc)?
Since after i moved to devp. to QAS SHPCON is haning with status 64 and is never getting process.
When i force it thru BD87 it gives this short dump message
Runtime errors DBIF_RSQL_INVALIDD_RSQL
EXCEPTN CX_SY_OPEN_SQL_DB
and it is pointing to the user exit EXIT_SAPLV55K_005. But i have not made any change to this user exit.
Can someone tell me if DESADV changes might has to be anything with SHPCON status 64?
IS there any way to resolve this.
Appreciate your help in advance.
Thank you.
Mamatha
hi mamata
can u please post the answer
Similar Messages
-
Has firmware upgrade on a machine running 11i has any impact
Hi all,
We have 11i on running on IBM AIX server. And its current firmware level is SF240_338. Two days back we had power problems and the machine fails to boot. So we got IBM support engineer and replacing the whole motherboard and CPU and also upgrading the firmware level to 240_382_382.
I am just worried if it has any impact on the oracle applications. Like will it function properly??.
Is there any link/relations ship between oracle applications and firmware.
Regards
TaherThere should be no effect. If you are upgrading the OS version, you may need to relink binaries as noted in MOS Doc 356878.1 (How to relink an Applications Installation of Release 11i and Release 12)
HTH
Srini -
Followed instructions but cannot change PDF to word - Showing doc has virus but does not
Followed instructions but cannot change PDF to word - Showing doc has virus but does not
Acrobat does not perform any virus checks. So, it appears that you are using one of Adobe's online subscription services.
Use the link below to go to the Adobe Document Solutions page. Select the service you've subscribed to.
Log in. Locate and use the "support" link. "Chat" is offered to service subscribers.
Discussion of your issue with the service's support ought to see you through the issue.
Be well... -
Here goes. My iPod touch has all my songs on it. I have changed computers several times and iTunes has a library of similar but not as many songs as iPod. When I plug iPod in ans go to sync it says that iTunes library will replace iPod songs. I don't want this to happen I want the I pod songs to sync with iTunes. What do I do?
That really does not work since music is not included in the backup. See:
iTunes: About iOS backups
puttly123 wrote:
backup your ipod. then sync your ipod to the computer, then restore your ipod and it will still have the right songs. its exactly what i had to do with mine. -
Why does the Excel source think my query has parameters?
Part of my current project involves converting an Excel spreadsheet having a number of tabs into an equal number of pipe-delimited flat files using an SSIS package. I've got one data flow task that opens up the excel file and selects the names of all the
tabs into and object variable. A second data flow task inside a for each loop attempts to read the first 32 columns from each tab. The excel source in the second data flow task is set up to use a sql command from a variable, and the variable is an expression
that substitutes the tab name into an otherwise-constant sql statement like this:
SELECT F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, F13, F14, F15, F16, F17, F18, F19, F20, F21, F22,
F23, F24, F25, F26, F27, F28, F29, F30, F31, F32 FROM [Securities Portfolio$]
The "First row has column names" box in the excel connection manager is not marked.
Here's the thing: this works for most of the tabs. The one above works. However, three of them are causing the following error:
The SQL command requires 2 parameters, but the parameter mapping only has 0 parameters.
I've modified the package to print all of the SQL statements used in the log file. The only difference is in the tab name. None have any question marks, which is what I thought SSIS used to mark parameters. I can't figure out what causes this, or even how
thw failing SQL queries are different than the ones that work:
SELECT F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, F13, F14, F15, F16, F17, F18, F19, F20, F21, F22,
F23, F24, F25, F26, F27, F28, F29, F30, F31, F32 FROM [Capital - Part1$]SELECT F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, F13, F14, F15, F16, F17, F18, F19, F20, F21, F22,
F23, F24, F25, F26, F27, F28, F29, F30, F31, F32 FROM [Capital - Part2$]SELECT F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, F13, F14, F15, F16, F17, F18, F19, F20, F21, F22,
F23, F24, F25, F26, F27, F28, F29, F30, F31, F32 FROM [Securities Sources$]
Any help would be appreciated.OK, I figured it out, and will write it here in case someone else has a similar issue, because I spent several hours on Google trying to figure out what was going on.
It turns out that not all of the worksheets actually HAVE 32 columns. It did not occur to me at first that this could be an issue, because when you open an Excel file in Excel, there are always more columns if you just scroll over more. However, the way
Microsoft Jet reads Excel files, each worksheet has a fixed number of columns.
The worksheets that were causing the issue were the ones that have fewer than 32 columns. If there are only 30 columns and I try to select F32, Microsoft Jet assumes that F32 is supposed to be the name of a parameter. As far as I can tell, SSIS 2008 does
not allow you to set up parameter values for use with Jet, but Jet will nevertheless parse your query and determine that there are parameters needed if it can't find some of the column names.
To get around this, I changed the step that gets the worksheet names to also return the number of columns in each worksheet, and then changed the query to return NULL for any columns that don't exist. So, for a worksheet having only 30 columns, I now run
this:
SELECT F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, F13, F14, F15, F16, F17, F18, F19, F20, F21, F22,
F23, F24, F25, F26, F27, F28, F29, F30, NULL AS F31, NULL AS F32 FROM [Capital - Part1$]
And that fixes it. -
SAX ..crimson parser vs xerces parser..does changing parsers help
Hello ...I relatively new to XML technology.My question is does changing parsers from say crimson to xerces(or such...) improove the performance of an application.Our application is faced with a performance problem and I was wondering if changing parsers has a substantial affect..if at all ther is any.
Thanks so much for your time.
----Try it and see. Asking people to predict the
performance of code they know nothing about is
pointless.I understand what you say ...thats true .But the application I am working on takes around 16 hours to finsh(It actually loads data to a remote server and I cant test it many times).Before trying with different parsers ...I wanted to know if it is worth doing that .
Thanks again..... -
When I plug the connector cord between my iPhone 4 and my laptop, it does not charge now (as it always has in the past), although iTunes definitely sees my phone (so the connection is good). This also happened when I tried to charge my iphone in my car with an adaptor which used to work before too. Any ideas on why my phone is suddenly not charging anymore??
I removed the AMDS as part of the instructions for completely removing itunes. Nothing changed unfortunately. I don't understand why it is happening!
I have already checked for lint, etc as you suggested, but don't have another USB cable on me at the moment. I'll be returning home tomorrow so will try then, but I would have thought the cable was fine as it still charges the phone through an AC adaptor fine. Thanks for the suggestions! -
Help, does there has any sdk or something about itunes on mac??
help, does there has any sdk or something about itunes on mac??
i want develop a app to read information from itunes and change some content in it.
thanks for any help;)If you are talking about an iTunes API in which you could make an app similar to a Twitter client for Twitter, there is no such thing. If you are talking about the iPhone SDK to make an App which appears in the iTunes store, you can download Xcode in the Mac App Store or at http://developer.apple.com/devcenter/ios/index.action
-
what does this message mean: this apple ID has not yet been used in the iTunes store"? I cant connect using my iphone. But it works in iTunes on my laptop.
FAQ apple id http://support.apple.com/kb/HT5622?viewlocale=en_US
http://support.apple.com/kb/HT1311 -
I have a canon printer mf5940dn, it is connected via USB to my macbook air, and yet, when I want to print smth, it says the printer is not connected. does anyone has any idea why? is there a guide to do it properly?
Hi,
I am currently replying to this as it shows in the iChat Community.
I have asked the Hosts to move it to Snow Leopard (you should not lose contact with it through any email links you get)
I also don't do Wirelss printing so I can't actaully help either.
10:01 PM Friday; July 29, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb( 10.6.8)
Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images." No, Seriously -
my device has been crushed beyond repair, and I don't think I ever did the backup thing. does this mean I can no longer see any of my stuffs??
thats really 4kd up
-
How to resolve this error while doing changes in a table
Hi,
For a table, we are accessing the column values in the table through controller with the help of view object. We are also using the function 'setAttribute()' to assign back the formatted value for each and every row.
But once the page is loaded and if the code gets executed from the method 'processRequest()', I am able to see an error message in the top of the page as "The search cannot be executed because the table has pending changes that would be lost."
How to get rid of this error ? Please help me in this regard. Its urgent .
Thank You,
ThiyagarajanHi,
The VO associated to the Table Region on you page is dirty (means that there are some changes done in the VO which has not been commited to the database).
Pending Changes
Thanks
--Anil -
i have a new email so have a new apple ID now and am trying to change it in icloud. but it has locked me out and won't send my email a reset password link for some reason. even though it says its sent, it doesnt come to the email address. help!
Welcome to the Apple community.
If you are unable to remember your password, security questions, don’t have access to your rescue address or are unable to reset your password for whatever reason, your only option is to contact Apple ID Support, upon speaking to an operator you should explain that your problem is related to your Apple ID, this way you will not be charged for assistance, even if you don’t have an AppleCare plan.
You will need to show patience with the procedure and be prepared to demonstrate without question that the account belongs to you. Don’t expect access to be restored immediately and if you aren’t the owner of the Apple ID registered to the device the account won’t be reset.
This is answer is provided from my own database of boilerplate responses and the content was last reviewed and/or tested on: 2014/12/18 -
Does the RFFOEDI1 program has any implication on the ACH direct deposit?
Hi all,
Can any one please explain the use of RFFOEDI1 program. Is this
program used just to generate I-Doc?
Scenario: For Check payment method(C)
Once F110 run is successful, then we have to run RFFOUS_C program to
generate checks. Once this program is complete, checks will be
generated and the check info will be available in PAYR table.
Scenario: For ACH-CCD payment method (D)
Once F110 run is successful with payment method D, The payment details
will hit BSAK table.
Now, I don't want to generate the SAP standard I-Doc with RFFOEDI1, do
I still need to run RFFOEDI1 program???
For the check payment, RFFOUS_C program triggers the generation of
checks after which the check info will be available in PAYR table
Likewise, does the RFFOEDI1 program has any implication on the ACH
direct deposit?
To my understanding, If you do a payment using payment method, ACH
direct deposit in SAP, we don't generate any check numbers ???!!!
Do we get any reference number or anything when the direct deposit is
done??? This reference number could be used to trace the invoice
against which this ACH payment was done!
If it is the case, where do we get/ when do we generate the reference
number to trace the invoice????.....any inputs?
If we are not going to run RFFOEDI1 program, (if we are not interested
in generating IDoc) then are we DONE with the ACH direct deposit, once
we are done with payment run(F110)???
Where do we get the reference number which specifies the ACH payment?
Sorry, I have poured in lot of question at one place!
Any inputs/ solutions/ suggestions are greatly appreciated!
Thanks a lot!RFFOEDI1 is typically used when payments to vendors are to be sent by an EDI 820 file to the bank. This program generates the PEXR2002 idoc. The idocs are sent to the EDI translator where these are mapped to an EDI 820 file format and sent to the bank.
Scenario ACH-CCD payments method (D)
If you do not want to send EDI 820 payments, you would typically not generate the idoc - in which case - you dont have to use RFFOEDI1. This probably means that (a) you are using the RFFOUS_T program for generating the payment medium or (b) you are using the payment medium workbench to generate the ACH file (NACHA format) for your house bank.
You do have to send an ACH file to the bank for paying your vendors - which means - you are probably using one of the above methods to generate the file.
ACH Direct Deposit
I am assuming that you are probably referring to ACH-PPD type payments here. You would still have to send the payment medium using one of the methods mentioned above.
In all ACH scenarios, your payment document number, is your reference number that was used to clear the open item.
Hope this helps. -
IsSchemaValid does chang the xml-encoding header from UTF-8 to WINDOWS-1252
I found the following effect:
isSchemaValid does changing the encoding - entry of the xml-file-header
generating xml-file by using DBMS_XMLGEN :
xmldoc := DBMS_XMLGEN.getXML(ctx);
with the header of the file is
<?xml version="1.0" encoding="UTF-8"?>
change the xmldoc to a xmlType
and validate it against the schema
xmldoc_xmlType:=(xmltype(xmldoc)) ;
xmldoc_xmlType.isSchemaValid ( bSchemalocation)
after this the header of the file is
<?xml version="1.0" encoding="WINDOWS-1252"?>
my DB:
R11_2_0_2 / Windows 64
the same in
R11_2_0_1 / Windows 32
select name, value from v$parameter where upper(name) like '%NLS%'
nls_calendar
nls_comp BINARY
nls_currency
nls_date_format
nls_date_language
nls_dual_currency
nls_iso_currency
nls_language AMERICAN
nls_length_semantics BYTE
nls_nchar_conv_excp FALSE
nls_numeric_characters
nls_sort
nls_territory AMERICA
nls_time_format
nls_timestamp_format
nls_timestamp_tz_format
nls_time_tz_format
register my schema by:
dbms_xmlschema.registerSchema(
schemaurl => vschemaurl,
schemadoc => xsd_file,
local => FALSE,
gentypes => TRUE,
genbean => FALSE,
gentables => TRUE,
force => FALSE,
owner => dbuser
,CSID => nls_charset_id('AL32UTF8')
How can I let or change back the xml-encoding entry to UTF-8 ?
regardsYour solution should not be relied upon...
C:\Temp>sqlplus /nolog @t1 %CD%
SQL*Plus: Release 11.2.0.2.0 Production on Fri Mar 4 09:41:32 2011
Copyright (c) 1982, 2010, Oracle. All rights reserved.
SQL> spool testcase.log
SQL> --
SQL> connect sys/oracle as sysdba
Connected.
SQL> --
SQL> set define on
SQL> set timing on
SQL> --
SQL> def XMLDIR = &1
SQL> --
SQL> def USERNAME = XDBTEST
SQL> --
SQL> def PASSWORD = &USERNAME
SQL> --
SQL> def USER_TABLESPACE = USERS
SQL> --
SQL> def TEMP_TABLESPACE = TEMP
SQL> --
SQL> drop user &USERNAME cascade
2 /
old 1: drop user &USERNAME cascade
new 1: drop user XDBTEST cascade
User dropped.
Elapsed: 00:00:00.24
SQL> grant create any directory, drop any directory, connect, resource, alter session, create view to &USERNAME identified by &PASSWORD
2 /
old 1: grant create any directory, drop any directory, connect, resource, alter session, create view to &USERNAME identified by &PASSWORD
new 1: grant create any directory, drop any directory, connect, resource, alter session, create view to XDBTEST identified by XDBTEST
Grant succeeded.
Elapsed: 00:00:00.07
SQL> alter user &USERNAME default tablespace &USER_TABLESPACE temporary tablespace &TEMP_TABLESPACE
2 /
old 1: alter user &USERNAME default tablespace &USER_TABLESPACE temporary tablespace &TEMP_TABLESPACE
new 1: alter user XDBTEST default tablespace USERS temporary tablespace TEMP
User altered.
Elapsed: 00:00:00.00
SQL> set long 100000 pages 0 lines 256 trimspool on timing on
SQL> --
SQL> connect &USERNAME/&PASSWORD
Connected.
SQL> --
SQL> create or replace directory XMLDIR as '&XMLDIR'
2 /
old 1: create or replace directory XMLDIR as '&XMLDIR'
new 1: create or replace directory XMLDIR as 'C:\Temp'
Directory created.
Elapsed: 00:00:00.00
SQL> create table XML_DEFAULT of XMLTYPE
2 /
Table created.
Elapsed: 00:00:00.11
SQL> create table XML_CLOB of XMLTYPE
2 XMLTYPE store as CLOB
3 /
Table created.
Elapsed: 00:00:00.01
SQL> select *
2 from nls_database_parameters
3 where parameter in ('NLS_LANGUAGE', 'NLS_TERRITORY', 'NLS_CHARACTERSET')
4 /
NLS_LANGUAGE AMERICAN
NLS_TERRITORY AMERICA
NLS_CHARACTERSET AL32UTF8
Elapsed: 00:00:00.02
SQL> declare
2 XML_DEFAULT XMLType := xmltype('<?xml version="1.0" encoding="WINDOWS-1252"?><TEST>SELECT</TEST>') ;
3 XML_CLOB XMLType := xmltype('<?xml version="1.0" encoding="WINDOWS-1252"?><TEST>SELECT</TEST>') ;
4 begin
5 delete XML_DEFAULT;
6 delete XML_CLOB;
7 insert into XML_DEFAULT values (XML_DEFAULT);
8 dbms_xslprocessor.clob2file( XML_DEFAULT.getclobval() , 'XMLDIR','XML_DEFAULT.xml');
9 IF XML_DEFAULT.isSchemaValid ( 'SCHEMALOCATION_DOES_NO_MATTER_FOR_TEST_CASE.XSD', 'SCHEMA_NO_MATTER') = 1 THEN null; ELSE null; END IF;
10 commit;
11 dbms_xslprocessor.clob2file( XML_DEFAULT.getclobval() , 'XMLDIR','XML_DEFAULT_IS_VALID.xml',nls_charset_id('WE8MSWIN1252'));
12 dbms_xslprocessor.clob2file( XML_DEFAULT.getclobval() , 'XMLDIR','XML_DEFAULT_WIN1252.xml');
13 insert into XML_CLOB values (XML_CLOB);
14 dbms_xslprocessor.clob2file( XML_CLOB.getclobval() , 'XMLDIR','XML_CLOB.xml');
15 commit;
16 end ;
17 /
PL/SQL procedure successfully completed.
Elapsed: 00:00:00.27
SQL> --
SQL> host type XML_DEFAULT.xml
<?xml version="1.0" encoding="WINDOWS-1252"?><TEST>SELECT</TEST>
SQL> --
SQL> host type XML_DEFAULT_IS_VALID.xml
<?xml version="1.0" encoding="UTF-8"?>
<TEST>SELECT</TEST>
SQL> --
SQL> host type XML_DEFAULT_WIN1252.xml
<?xml version="1.0" encoding="UTF-8"?>
<TEST>SELECT</TEST>
SQL> --
SQL> host type XML_CLOB.xml
<?xml version="1.0" encoding="WINDOWS-1252"?><TEST>SELECT</TEST>
SQL> --
SQL>First, the character set changes because isSchemaValid() causes the document to be parsed and converted to the internal database character set, as does storing it in a table.
It appear that your solution works in SQL because the semantics of SQL are such that it causes a 'copy' of the XMLType to take place before running the isSchemaValid() processing, were we to optimize away that copy as a result of a patch or performance optimization project then you solution would break...
If you want the output in a particular character set you should force that using XMLSerialize or getBlobVal(charsetid). Unfortunately we don't have a convience method for writing BLOBS on DBMS_XSLPROCESSOR...
Maybe you are looking for
-
Can you add one picture at a time from a camera to iPhoto?
Is it possible to enter one picture at a time from a camera to iphoto?
-
Adobe Acrobat X Pro memory issues
I work for a company that scans micro film cards into the computer. Each micro film card usually has about 4 to 5 pages on each card. The scanner we use scans those 5 pages into one pdf page. We just bought adobe acrobat x pro to help us split these
-
Importing graphics in Dreamweaver MX 2004
On some computers I am finding Dreamweaver MX 2004 imports images as imagesfilename into the root folder - and not as the original filename into the default images folder. Is there a setting that I should be aware of?
-
At line-selection... SET pf 'status'.
hi abapers ! i am working with interactive reports ! my problem ...i s when am using SET PF 'STATUS'. At line-selection event is not getting triggered..! i.e, when am double cllicking on the list ... its showing choose a valid function. am able to i
-
What does this error message when I try to do updates mean? And how can I fix it? Thanks. (The operation couldn't be completed. (NSURLErrorDomain error -1012.) James maverick 10.9.1