Does Cisco Aironet 1131G really support EAP-SIM ?

Hello!
I have tried to configure EAP-SIM authentication on Cisco Aironet 1131G for Wi-Fi Offload but unfortunately I couldnt make it work. As far as I understand the Wi-Fi standard it is fully supported in 802.11n within WPA2-Enterprise standard. I have read Cisco datasheet for 1131G where your are claiming that you support EAP-SIM in WPA2 also. I have tried to configure it according to configuration guide but it always requires to enter password key first when I try to connect to SSID with configured WPA2 and EAP-SIM. Can you please provide us with additional info how to properly configure AP or confirm that EAP-SIM needed for seamless 3G/Wi-Fi authentication is supported only within WPA2-Enterprise.
BR,
Denys

Yes EAP-SIM is supported by Cisco Aironet 1131G. For more detail about this product you can go to below link.
http://www.cisco.com/en/US/prod/collateral/wireless/ps5678/ps6087/product_data_sheet0900aecd801b9058.htmlhttp://

Similar Messages

Which version of the software WLC starts to support EAP-SIM?

Please, help me solve this problem?

Hello Sergey,
As per your query i can suggest you the following solution-
To support EAP-SIM in WLC software version is not at all the point of concern.
As RADIUS server EAP-SIM support makes it possible for GSM subscribers to use a single SIM for both voice and data access. The RAD-Series RADIUS Server EAP-SIM Developer’s Kit empowers the GSM operator to create a compatible and reliable interface to his SS7 network. The need for a redundant subscriber database and the associated management costs are eliminated while guaranteeing a uniformly secure network for both voice and data services.
Several 802.1X authentication types exist, each providing a different approach to authentication while relying on the same framework and EAP for communication between a client and an access point. Cisco Aironet products support more 802.1X EAP authentication types than any other WLAN products. Supported types include:
•EAP-Subscriber Identity Module (EAP-SIM)
Hope this will help you.

Cisco Aironet 1131G cannot access BVI

I have configure our Cisco Aironet 1131G with Multiple SSID with VLAN's
The Guest VLAN is working well and no problem,
The issue i have is that I cannot connect to the BVI on the Wireless AP, i have setup to VLAN's
2 = LAN & NATIVE VLAN
999 = GUEST VLAN
this is my config
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
hostname NAFTA_AP_003
logging rate-limit console 9
aaa new-model
aaa group server radius rad_eap
aaa group server radius rad_mac
aaa group server radius rad_acct
aaa group server radius rad_admin
aaa group server tacacs+ tac_admin
aaa group server radius rad_pmip
aaa group server radius dummy
aaa group server radius rad_eap2
server 10.1.122.50 auth-port 1645 acct-port 1646
aaa authentication login default local
aaa authentication login eap_methods group rad_eap
aaa authentication login mac_methods local
aaa authentication login eap_methods2 group rad_eap2
aaa authorization exec default local
aaa accounting network acct_methods start-stop group rad_acct
aaa session-id common
dot11 mbssid
dot11 syslog
dot11 vlan-name GUEST vlan 999
dot11 vlan-name LAN vlan 2
dot11 ssid Nufarm_EXT
   vlan GUEST
   authentication open
   authentication key-management wpa
   mbssid guest-mode
   wpa-psk ascii 7 053B0918245E6308015546
dot11 ssid Nufarm_INT
   vlan 2
   authentication open eap eap_methods2
   authentication network-eap eap_methods2 mac-address mac_methods
   authentication key-management wpa
username nemesis privilege 15 secret 5 $1$SjHa$TGIGBh.IhLNgflxBreKYf.
bridge irb
interface Dot11Radio0
no ip address
no ip route-cache
encryption vlan GUEST mode ciphers aes-ccm tkip
encryption vlan 2 mode ciphers tkip
ssid Nufarm_EXT
ssid Nufarm_INT
channel 2422
station-role root
interface Dot11Radio0.2
encapsulation dot1Q 2 native
no ip route-cache
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
interface Dot11Radio0.999
encapsulation dot1Q 999
no ip unreachables
no ip proxy-arp
no ip route-cache
no cdp enable
bridge-group 255
bridge-group 255 subscriber-loop-control
bridge-group 255 block-unknown-source
no bridge-group 255 source-learning
no bridge-group 255 unicast-flooding
bridge-group 255 spanning-disabled
interface Dot11Radio1
no ip address
no ip route-cache
shutdown
dfs band 3 block
channel dfs
station-role root
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
interface FastEthernet0
no ip address
no ip route-cache
duplex auto
speed auto
interface FastEthernet0.2
encapsulation dot1Q 2 native
no ip route-cache
bridge-group 1
no bridge-group 1 source-learning
bridge-group 1 spanning-disabled
interface FastEthernet0.999
encapsulation dot1Q 999
no ip unreachables
no ip route-cache
no cdp enable
bridge-group 255
no bridge-group 255 source-learning
bridge-group 255 spanning-disabled
interface BVI1
ip address 10.1.2.242 255.255.255.0
no ip route-cache
ip default-gateway 10.1.2.254
ip http server
ip http authentication aaa
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
ip radius source-interface BVI1
radius-server attribute 32 include-in-access-req format %h
radius-server host 10.1.122.50 auth-port 1645 acct-port 1646 key 7 03516213160B73435E0C2D16110504
radius-server vsa send accounting
bridge 1 route ip
line con 0
line vty 0 4
end

Ah, yeah that would do it, makes the swich want the VLAN to be tagged. Nice catch on that!
HTH,
Steve
Please remember to rate helpful posts or to mark the question as answered so that it can be found later.

Does Cisco ISE 1.2 support Catalyst SRW224G4P and Small business ESW520 Switches?

Hello all,
Does Cisco ISE 1.2 support Catalyst SRW224G4P and Small business ESW520 Switches?
Best regards.

Hi there, the link below outlines the ISE supported Cisco hardware:
http://www.cisco.com/c/en/us/td/docs/security/ise/1-3/compatibility/ise_sdt.html
Thank you for rating helpful posts!

Does Premiere Pro CS4 really support Vista 64-bit?

I have installed Premiere Pro CS4 on my Vista 64-bit server and recognized in the task manager that Premiere is listed as a 32-bit application "Adobe Premiere Pro.exe *32" which makes me wonder if Adobe's statement given in the FAQ is correct, where they say "Adobe Premiere Pro is optimized to run on 64-bit systems. The key advantage of 64-bit systems is that they can use up to 64GB of RAM. Adobe Premiere Pro CS4 can use large amounts of this memory because it splits different tasks into separate processes."
Am I executing the correct Premiere Pro EXE-file (the application itself works fine) and is that 32-bit application able to make use of the fully available RAM space (which is 8 GB on my system)?

Well great for you Harm, but this problem has me stumped. I've been troubleshooting NLE systems since my Pinnacle DC30 Premiere 4.2 system.
I'm looking for a solution not to start a fight so if anyone has confronted similar problems and found a fix, please reply.
FYI, Adobe has made it clear that Premiere CS4 does not support daisy chaining decks or any other 1394 devices, but this is not my problem.
"Adobe Premiere Pro CS4 doesn't support multiple devices on a FireWire chain or multiple devices on a FireWire card."
Above quote copied from this Adobe support document http://kb2.adobe.com/cps/405/kb405744.html
I'm not working with DV I have been shooting in 720P on a Sony PVW EX1 if that even matters.
Can you explain why my external array works well with XP fairly well with 32 bit Vista? It's an ASUS P5E Deluxe motherboard. This is not BS, I have a long list of Microsoft case numbers and it is REAL pain having to explain to someone in India the problem over and over again. I've been told by the array manufacturer SimpleTech ProDuo that it should work with the OS drivers. The Internet forums for other 1394 devices have many instances of 64 bit Vista incompatibility. The same problems I'm having with the same OS just different devices. What's really weird is how it will work fine like today, it's back to normal. I have had this system working perfectly then overnight the array vanishes in my computer but shows up in device manager with an error. Then a few hours later without changing anything, it starts working again, very intermittent. As usual, it will fail when there's a deadline.
I've run Avast antivirus, Malwarebytes and Spybot. Swapped cables,defragged drives, updated MB bios and software looked everywhere for solutions.
The MB Manual is found at http://support.asus.com/download/download.aspx?SLanguage=en-us
I can transfer content to my internal array but I'm trying to optimize a workflow that starts by shooting on SxS cards on the PVW EX1 and transferring them to the array in the field with the 32 bit Vista laptop and making rough cuts. I keep the project files on a USB drive. Then transfer the array and USB drive to the 9450 quad desktop system in the studio for final editing. When I get this to work, it's a real time saver. But transferring files to the internal array is possibly the only dependable solution for now.

Does jmf2.1.1 really support rtsp?

where can i find the related examples?

Hi,
Sun's posted the third beta of the Java Media Framework 2.1.1 on the Java Developer Connection (registration required). New features in beta 3 include:
The JMF Customizer has been added to the JMF performance packs.
The QuickTime file writer now creates streamable QuickTime files
Support for UNC paths such as file://unixmachine/home/videouser/video.mov
RTP Connector: a new interface that allows developers to connect JMF/RTP to their own and possibly proprietary transport services.
RTSP Processor
A new control that provides a handle on RTPManager objects to retrieve RTP statistics from the RTSP Player
The RTSP Player can handle multiple audio and video streams
JAWT support for jdk1.3+
Also please refer this URL for RTSP Documentation with examples
http://java.sun.com/products/java-media/jmf/2.1.1/support-rtsp.html
http://java.sun.com/products/java-media/jmf/2.1.1/documentation.html
I hope this will help you.
Thanks
Bakrudeen
Technical Support Engineer
Sun MicroSystems Inc, India

Does EAP/SIM make sense for others than mobile operators?

Hi,
I'm wondering about the many different EAP authentication protocols. One of these is EAP/SIM (initiated by Nokia). I think the advantage of this authentication method might be the kind of key exchange. Users are familiar in using SIM-cards. Out of this consideration I have some questions:
* Is EAP/SIM as secure as EAP/TLS or EAP/Cisco?
* Does it make sense to use EAP/SIM as an WISP (given that the WISP is NOT a GSM/UMTS mobile operator)?
* What is the position of Cisco to EAP/SIM? Will Cisco support it?
Best regards,
Armin

This white paper should help: http://www.cisco.com/warp/public/cc/pd/witc/ao1200ap/prodlit/wswpf_wp.htm

IPhone 4 does not really support MJPEG?

iPhone 4 tech specs claim that it supports Motion JPEG videos.
However, *iTunes refuses to copy any MJPEG video to my iPhone 4*. If I try to drag them, it says "<file> was not copied to the iPhone <name> because it cannot be played on this iPhone". If I sync a photo folder with "Include videos" checked, it just ignores those videos.
The videos are in exactly the format listed in the iPhone tech specs: "Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format".
They play perfectly in both QuickTime Player and VLC. QuickTime movie inspector says they are "Motion JPEG OpenDML, 1280x720, Millions; u-law 2:1, Stereo, 44.100 kHz", frame rate 30.00 fps.
All of my software is up to date. iPhone 4.2.1, iTunes 10.1.1.4, QuickTime 7.6.9, Windows XP Pro SP3.
I've tried smaller video sizes (640x480). I've tried both dragging and syncing. No joy. MPEG4 videos transfer no problem, but not MJPEG.
What's the deal? Does my iPhone 4 really support MJPEG videos? If so, how the heck can I transfer them?
I hate to say it, but MJPEG support is looking like blatant false advertising by Apple.

cls24 -- Click on the "iPhone" tab at the top of this page, then the "Tech Specs" link at top right. Voila. MJPEG support. This would be very handy if it worked since our cameras shoot both high-def and standard-def MJPEG.
Monty1945 -- It would be very helpful to know:
1) Exactly how did you transfer your "old M-JPEG files" to the iphone?
2) Exactly what file format (eg avi, mov) and video/audio codecs (use Movie Inspector in Quicktime Player) did those files use?
Otherwise, I have to assume you are remembering incorrectly, because I have tried MANY different combinations of codecs, formats, and fourCCs to get this to work. It simply doesn't.
Has anyone else tried to put their MJPEG videos on their iPhone 4, and found that it doesn't work?
Thanks.
J

EAP-SIM Fast Re-Authentication

Hi,
I understand IPHONE supports EAP-SIM, but how about Fast Re-Authentication defined in RFC 4186? does IPHONE support it?

To Lenovo Android Developer,
Please add this EAP-SIM Wifi authentication feature on the next firmware update.
Because in Indonesia almost all GSM operators using EAP-SIM for their WiFi service.
Thank you.

Lumia 920 EAP-SIM WiFi Settings

Please help me,
How to configure Lumia 920 to use EAP-SIM security, In the specification page it say support EAP-SIM.
I Can't choose security type from WiFi setting, even from advanced setting. Lumia 920 always ask username & password everytime I try to connect to my operator WiFi, in blackberry I can choose EAP-SIM Security & don't need entering username & password.
Sorry fo my English.
Thank you

sam_kara, this thread is about WPA-Enterprise with EAP-SIM. In your case, you are using TLS or TTLS or … you have to figure out which outer and inner EAP types your company uses. Then you can vote for it:
TLS
TTLS
rioagusw wrote:
How to configure Lumia 920 to use EAP-SIM security.
With EAP-SIM you do not configure anything, it just works. However, have a look …
Where did you read about Windows Phone 8 supporting EAP-SIM? The qualification says something different.

Cisco 7606 stacked VLAN support

Hi All,
Does Cisco 7606 GigabitEthernet modules support stacked VLAN (two VLAN tags)?
If yes, how do I configure it?
Thanks in advance.
Regards,
Sarah

Hi Sean,
Yes, it is QinQ tunneling. I am using Cat6k-Sup720.
Cisco7606(config-vlan)#?
VLAN configuration commands:
are Maximum number of All Route Explorer hops for this VLAN (or
zero if none specified)
backupcrf Backup CRF mode of the VLAN
bridge Bridging characteristics of the VLAN
exit Apply changes, bump revision number, and exit mode
media Media type of the VLAN
mtu VLAN Maximum Transmission Unit
name Ascii name of the VLAN
no Negate a command or set its defaults
parent ID number of the Parent VLAN of FDDI or Token Ring type VLANs
private-vlan Configure a private VLAN
remote-span Configure as Remote SPAN VLAN
ring Ring number of FDDI or Token Ring type VLANs
said IEEE 802.10 SAID
shutdown Shutdown VLAN switching
state Operational state of the VLAN
ste Maximum number of Spanning Tree Explorer hops for this VLAN (or
zero if none specified)
stp Spanning tree characteristics of the VLAN
tb-vlan1 ID number of the first translational VLAN for this VLAN (or
zero if none)
tb-vlan2 ID number of the second translational VLAN for this VLAN (or
zero if none)
Regards,
Sarah

Beginner Needs Help with Aironet 1131G Wireless Access Point

I have a new Cisco Aironet 1131G Wireless Access point. It is picking up an IP address and I can ping that address. However, I can't access it via the web-based GUI or the CLI. I have preformed the reset. Any suggestions would be greatly appreciated.
Thanks.

Hi,
I cannot access means what?? are you not able to go to CONFIG T prompt from CLI?? and if you are in the same subnet as that of the AP, are you not able to open up the GUI?? if you are not able to then, issue the command "show version" on the AP CLI and see if your image is "RCVKW8" image. if so u need to convert the same to IOS using the below method..
http://www.cisco.com/en/US/docs/wireless/access_point/12.4_21a_JA1/configuration/guide/scg12421aJA1-chap22-trouble.html#wp1038660
lemme know if this answered your question..
Regards
Surendra
====
Please dont forget to rate the posts which answered your question and mark it as answered or was helpfull

How many users are supported on a Cisco Aironet 1141N? 30?

I have a client that wants to upgrade his Aironet 1131 APs with 1141N. How many users are supported on a Cisco Aironet 1141N?

Yes, you could have 30 clients on the AP.
Client density all depends on what the client is doing, really.
So if you have clients that are just web surfing and pulling email 30+ isn't a problem. If they are all streaming video, then you want to plan for less clients per AP, and more APs.
Steve

"the SIM card inserted in the iPhone does not appear to be support" help?

Just doing this for my sister since she's has not been able to do so. From what she said, after she tried to update her iPhone 3G with the latest update, it came up with a message saying "the SIM card inserted in the iPhone does not appear to be supported." She also said that she tried to go through her phone but something came up where there was the itunes logo and the USB cord pointing toward it. We have tried going to the AT&T and Apple store but they just keep insisting that she purchases the new iphone. Because of that I am sure that they could fix our problem but they just want to sell the latest toy. Now, I've been searching through google and it keeps telling me to download some programs that will jailbreak it but I don't really trust downloading things off of the internet (unless I know they're safe). So, is there any way I can fix this problem? - Thanks

You seem to have a carrier-locked iPhone. Only the operator can help you unlock it. You need to contact them for instructions.

THE SIM CARD INSERTED IN THIS IPHONE DOES NOT APPEAR TO BE SUPPORTED.....

Hello. I bought on Dec. 17th 2007 at Orange shop in Beausoleil (south France) an iPhone with the option of unlocking the Sim (100 Euro plus). I followed all instructions. Everything was perfect, on Dec. 24th I was able to unlock the iPhone and used with Orange sim, MonacoTelecom sim and Vodafone sim. BUT the iPhone had a problem: when in sleep mode it did't received calls. So Afer 24 hours I stopped to use, UNSAFE. After Christmas holidays I called Apple assistance, they send me UPS and I returned iPhone to Apple (Jan. 4th 2008). I received a NEW iPhone on Jan. 8th 2008, VERY RUSH. Perfect service, I thought (...making terrible error...). The iPhone was LOCKED and I wasn't able to use. Now starts all the problems and for this reason I'm writing.
I called Apple and Orange many times. Orange didn't received the documents from Apple for the changing of IMEI and Serial, for them I had the first iPhone. After many cals finally I asked Apple to send something official for the changing.
....Days goes on and on.......
Every day two times I called Orange, but evert time I received different versions of my situation. Everyday I tried to restore the iPhone but still simlocked.
On Jan.15th after a meeting with a lawyer I decided to make pression to Apple: infact I returned them an unlocked iPhone and I received back a locked one.
I finally was able to speak with a "supervisor" (Mr. F...) and he tried to solve the problem.
On Jan. 16th I spoke with another "supervisor" (Mr. J...) and he told me to make another time the restore, because they changed the firmware.
From now I tried to make the restore many times with Orange sim. Everything seems to go well but when I put another sim on iTunes there is a white page with:
"THE SIM CARD INSERTED IN THIS IPHONE DOES NOT APPEAR TO BE SUPPORTED. Only compatible SIM cards from a supported Carrier may be used to activate iPhone. Please etc etc....".
So the iphone is locked!!! Maybe is country locked, I don't know.
Incredible, unbelievable.
From Apple they told me to wait someting from US, but until now ..... nothing, I received no news from Apple.
The bad situation is that after more than 30 days after the buy I am not able to use the hardware I bought!
I hope that someone from Apple can read this post (sorry if is so long, but with this details I think that in Apple can understand the problem).
I send in warranty an hardware with certain features that I payed to Apple and I received back it with different features.
That's not serious.
After many days, next week I think to go by legal means if Apple France is'nt able to solve the issue.
Many thanks if someone from Apple read my post.
Many thanks if someone help me.

But who has to make another unlock? Orange told me that for them is ok and the phone is unlocked. I read on other pages that Apple has a world-database with Imei numbers. So seems Apple can also do the unlock, even for the fact that they returned me a locked phone, different from the one I sent them. The warranty is with Apple, I forgot to warite in my first post that first of all on Janauary I went to Orange shop where I bought the iPhone but they told me for every problem is Apple that has to solve.

Does Cisco Aironet 1131G really support EAP-SIM ?

Similar Messages

Maybe you are looking for