Does Cisco Fabric/Device Manager 5.0(4d) run under VM?

I'd like to upgrade the OS on our W2k3 to W2K8 64-bit via virtual machine. First, is it possible to run Cisco Fabric and Device Manager under VM 2K8 64-bit? Has there been any issues reported running these tools, on VM?
Thanks

Hello Jayson,
Yes, Cisco Fabric Manager and Nevice Managercan run on W2k3 to W2K8 64-bit VM
http://www.cisco.com/en/US/partner/docs/switches/datacenter/mds9000/sw/5_0/release/notes/fm/fm_rel_notes_504d.html
VMs:
VMs that run any qualified or supported operating system version can run Cisco Fabric Manager.
Thanks

Similar Messages

Windows 7 64-bit Cisco Fabric/Device Manager Installer

Does anyone know if there is Cisco Device Manager Installer compatible with Windows 7 (64-bit)? I'm trying to install Device Manager onto my Windows 7 PC. this may happen on my Fabricv Manager Installer, as well. Any help would be appreciated.
Thanks

Senthil, Horacio,
I would not recommend using a 8.5(x) client against a 8.0(x) server (the OP suggests UCCE 8.0 is used). Even though they _should_ be compatible, they usually are not.
Upgrading the server side to 8.5 is the way to go IMHO.
G.

Cisco View Device Manager

Hi,
is there anybody who can tell me how to bring the Cisco View Device manager for 6500er up? I've installed the CVDM V.1.1 in the bootflash of my 6500er, IOS version is 12.2(18)SXF4 enterprise services. Installed java on the client is v.1.4.2_06. After launching the CVDM whithout proxy settings the windows starts gathering information, after a few seconds it stops with an error "java.lang.NullPointerException". This failure appeared with Mozilla 2.0.0.8 and IE 6.0, on the 6500er all vty lines are idle. Is anybody here who can help to solve the problem?

Here the text from the readme file; try to get the zip-file via the Bug-Id:
09-December-2005
This patch provides fix for the following bug:
CSCsc10956 - CVDM 1.1 does not work with 12.2(18)SXF
SUPPORTED IOS VERSION:
12.2(18)SXF
SIZE:
5,593,057 Bytes
DOWNLOADING AND MOVING FILES TO TFTP SERVER:
cvdm-c6500-1.1-CSCsc10956.zip contains the following two files
* cvdm-c6500-1.1.tar and
* cvdm-c6500-1.1_K9.tar (for Cisco IOS Cryptographic software)
Unzip cvdm-c6500-1.1-CSCsc10956.zip and copy one of the tar files to a TFTP server
Make sure to enter filenames exactly as they appear; (filenames are case-sensitive).
TRANSFERRING FILES TO YOUR SWITCH:
Step 1 : Access the switch CLI using a Telnet connection or the console port.
Step 2 : Transfer the files from the TFTP server to the bootflash of the switch. Issue
the following command:
# archive tar /xtract tftp:// / bootflash:
where is the filename of the CVDM-C6500 tar file you want to install
and is the IP address of the TFTP server. Make sure to enter filenames
exactly as they appear (filenames are case-sensitive). Make sure you are not in
configuration mode when issuing the archive command.
Step 3 : If you are not in configuration mode, issue the following command:
# configure terminal
Step 4 : Set HTTP server and path. For example:
# ip http path bootflash:
Please refer cvdm-c6500-1_1_readme.pdf in http://www.cisco.com/cgi-bin/tablebuild.pl/cvdm-6k for
further details on CVDM-C6500.

Cisco PIX Device Manager Version 3.0(2)

Hi
I have a PIX 515E:
Cisco PIX Firewall Version 6.3(4)
Cisco PIX Device Manager Version 3.0(2)
Compiled on Fri 02-Jul-04 00:07 by morlee
CCP-Firewall001 up 2 years 65 days
Hardware: PIX-515E, 32 MB RAM, CPU Pentium II 433 MHz
Flash E28F128J3 @ 0x300, 16MB
BIOS Flash AM29F400B @ 0xfffd8000, 32KB
0: ethernet0: address is 0012.80be.450d, irq 10
1: ethernet1: address is 0012.80be.450e, irq 11
Licensed Features:
Failover: Disabled
VPN-DES: Enabled
VPN-3DES-AES: Disabled
Maximum Physical Interfaces: 3
Maximum Interfaces: 5
Cut-through Proxy: Enabled
Guards: Enabled
URL-filtering: Enabled
Inside Hosts: Unlimited
<--- More ---> Throughput: Unlimited
IKE peers: Unlimited
This PIX has a Restricted (R) license.
Serial Number: 808480455 (0x30306ec7)
Running Activation Key: 0xac646fed 0xf8b86795 0xc3951ec2 0xb32aed09
It's operate with Java plug in 1.4.1 y I have a PC with IE 7 and Plug in 1.6.0 y doesn't download the PDM.
Are there a solution for it?

Try Disable Java on Internet Options. This issue oculd be releated to Java version also.

IPhone doesn't show anywhere except in iTunes and device manager.

My iPhone working, tethering and syncing property but does not show anywhere else. I need to back up the photos after some recent events and on a PC which just creates an encrypted file in an Apple file folder.
I can see the phone using an external program but the copy functions not there anymore. Picture wizard says there is no camera there. I have tried uninstalling the device and re-install. I have removed and installed iTunes and now have restore the phone completely. Picture wizard says there is no camera there. It does show in device manager and iTunes but oesn't show in Windows Explorer.
If I plug it into another computer it doesn't show in that either. Had a client over last night and his iPhone showed up on both computers and both started the camera wizard, So I'm thinking it's something in the phone. I need the photos backed up.
Thanks

This has really stumped me. I'm fairly well read on the iPhone software and related stuff. I also had some other tech savvy guys here last night and three brains had no answers. One thinks it must be hardware. I tend to disagree with that only because it charges, syncs, restores which tells me the hardware is working fine. i keeping this in mind that it's visible in iTunes(A) and Device Manager(XP). It's not visible in My Computer, Windows, Explorer or Control Panel. I can run a third party application on the iPhone and can see photos but the application won't let me copy them. I have some important photos that I need backed up. I have tried the phone on four other computers and it doesn't show on any where as the other phone shows up and works the way it should on those four computers. Same with reinstalling the drives, first one doesn't install, second one does. That simply narrows it down to the phone. I've restored the phone and it worked perfectly replacing the photos, oh and it was also working 6 weeks ago. So what's stopping it???? Arrr... its got me. I can usually fix those type of issues.

To open "device manager" install Java SE 6 runtime error message on bouts

Why does To open "device manager" install Java SE 6 runtime appear every time I boot up computer after installing upgrade to Yosemite 10.10 OS

You must have some application called "device manager" which is set to run at startup. Do you know what it is?
Go to System Preferences->Users and Groups, then select the "Login Items" tab and see what's there. Remove anything you don't recognize.
If it's an application you know, and you want to run, then you're going to have to install Java on your machine. Honestly, I'd recommend against it; the application must be quite old.

Does cisco ACS hardware run TACACS+ ?

hi all
I am very new to the security,
my question is , does cisco ACS devices run TACACS+ ?
or TACACS+ has to be installed in windows/linux ?
thank you

The below listed link will help you to configure tacacs authentication/authorization and also help you to integrate ACS with Active directory.
ACS 5.x and later: Integration with Microsoft Active Directory Configuration Example
ACS 5.x: TACACS+ Authentication and Command Authorization based on AD group membership Configuration Example
Regards,
Jatin Katyal
*Do rate helpful posts*

Unable to open 2 9509 switches at the same time in Cisco Device Manager

Dear Friends,
There are a pair of MDS 9509 switches whose management addresses are 172.16.2.197 and 172.16.2.198.
When we try to manage these Devices through Cisco device manager, the first device opens up without any problem, but when the second 9509 is opened in Cisco Device Manager, it fails giving the following error message:
"Open udp transport failed: Address already in use: Cannot bind"
To get around this issue, if we close the first interface to the 9509 switch, then we are able to open up the second 9509 in Device Manager.
We have this problem only in Cisco device manager. If we open one switch in Cisco device manager and the other switch in Cisco Fabric Manager, it works.
Also, we can telnet to both the devices successfully at a time.
The device manager in use is 4.1.
Please find enclosed the sh version outputs for your kind reference.
Can you please help me understand the cause of this issue?
Thanks a lot
Gautam

Is it always the same MDS that fails to open, or can you open either one first, and then the second one poses the problem (no matter which one is second)?
Can you try from a second work station and see if you can open DM to both switched at the same time? I suspect the address it is complaining about is the local workstation IP, not the MDS IP.
If you open the FM map, then you click on the MDS ICONs, can you open DM to both MDS?
- Mike

How to trigger other devices by Cisco Physical Access Management?

Hi all,
A question about Cisco Physical Access Management(PAM) here. We will achieve a goal like this:
step 1. A staff swipe the badge and get into the room;
step 2. The device in this room will be triggered to set up or to turn on at the same time, such as Ip-phone, light, screen of DMP...
step 3.(optional) When the staff exits the room and swipes the badge, all the devices will be turned off.
Is this dorable for PAM to finish this trigger? Or some more work of developing need to do based on PAM?
Thanks!
Ziwei Fan

Hi Bharaty,
thanks for your suggestion. I tried adding the tag as you suggested, sadly it does not work for me.
I had a little look at the coding in the tag, as I hope for the solution being in there. What makes me wonder is that I can specify the attribute TIMER in the tag, but the coding does not access it. The amount of time the "Please wait..." is shown is read from the technical profile.Which is 0 in my case.
Thus I tried setting it to 5000 in the debugger, but still no spinning thingy locking the UI.
Anyhow in the Scripts repository I found the JS functions usually used to trigger the functionality:
showSubmitInProgress(show, delay)
Even calling it directly does not work for me
I really suppose it has something to do with the area frame tag and the late rendering. It still keeps me wondering why I can not trigger server round trips from JS as I can normally do.
cheers Carsten

Can Cisco Device Manager Support ACS Authentication?

Background:
My company has approximately 500+ devices all across the country (mainly 2801's, 2924's, 2950's, and 2960's) and approx 3 people that have a real idea of how to configure the devices, and 2 or 3 that have a general clue about how to do it. I am in the process of moving all of these devices to use ACS authentication for signing into the device. While I am doing this I am establishing a strong password for the secret password to provide as a backup.
Problem:
My supervisor would like the cisco device manager to be available to the people that don't have the in depth cli experience. However in my testing, it will only accept the strong password for its authentication, and does not try the ACS server for authentication. Is this possible?

Hi,
Actually, there is a difference as from where the authentication is picked from for HTTP authentication,
With HTTP v1 server, same method list is picked, that is used by VTY lines.
With HTTP v1.1 server, but before the integration of fix for bug CSCeb82510, the method list defined for console is checked.
After the fix of the above mentioned bug, we have some different sent of commands that we can use.
I would suggest you to give this a try,
aaa authentication login CONSOLEandHTTP tacacs+ local
aaa authorization exec CONSOLEandHTTP if-authenticated
ip http authentication aaa
line con 0
login authentication CONSOLEandHTTP
authorization exec CONSOLEandHTTP
For detail please refer,
http://www.cisco.com/en/US/tech/tk59/technologies_tech_note09186a008069bdc5.shtml
Regards,
Prem

My Hitachi external drive does not show up in my Dell Lapto Device Manager

I have a Dell external drive which is Hitachi Model 72323. I was happy with it until I used bit locker to add a password on it. After that it worked a couple of times then my computer will not recognize the drive again. It does not even show up in my device
manager. I plugged the device into many other computers and it is recognized promptly. However, another Dell that I have will only recognize it once in a while. I don't understand why it is not showing up in the device manager. Please help.

Hi,
I suggest you first install latest Windows Updates for your pc.
Reinstall USB controllers.
Click Start, then type device manager in the Search box, then click
Device Manager.
Expand Universal Serial Bus controllers. Right click a device and click
Uninstall. Repeat for each device.
Once complete, restart your computer. Your USB controllers will automatically install.
Update the BIOS, install your motherboard's latest chipset drivers. you need to view the manufacture website and the user manual
Meanwhile, please refer to the following article if you need some more information:
Error: “USB Device not recognized” when you try to access a USB external hard drive.
http://support.microsoft.com/kb/2654149
Yolanda Zhu
TechNet Community Support

Graphics Card Does Not Show Up In Device Manager (Re: Installing AMD Video Drivers - Windows 8.1 (Step-By-Step Tutorial)

This tutorial is a step-by-step tutorial on how to "fix" issues of a new graphics card not appearing in Windows 8.1 Pro, or not appearing (as a device) in Device Manager, or it's not being detected by Windows 8.1.
This is the "second part" of a Step-by-Step Tutorial on how to install AMD Radeon graphics card drivers in Windows 8.1 Pro.
GRAPHICS CARD IS NOT DETECTED AND DOES NOT SHOW UP IN WINDOWS 8.1 DEVICE MANAGER
This problem can appear if the video card is not installed properly in the PCI slot and as a result the card is not detected in device manager. Check the physical connections again, reinsert the card properly in the PCI slot, check the connections (including the power cables going to the video card, and ensure that the fan on the graphics card is spinning and the card does have power and is properly seated/inserted) and then install the drivers from the manufacturer’s website.
If the video card is in fact installed properly, but the problem of the video card not being discovered/found by the operating system persists, then try these following methods below to check if this solves the problem.
Method 1:
First, I would suggest you to run the following Microsoft Fixit to get the problem automatically detected and fixed. This Microsoft "fixit" App checks if the device is currently disabled or turned off or the driver is not installed.
Hardware devices are not working or are not detected in Windows.
http://support.microsoft.com/mats/hardware_device_problems/en-us
Method 2:
Sometimes, some devices in device manager are hidden due to corrupt or missing drivers.
Follow the steps below to show hidden devices in the device manager and troubleshoot accordingly.
Press the Windows key + X
Select Command Prompt (Admin)
Type set devmgr_show_nonpresent_devices=1 and hit enter
Type Start DEVMGMT.MSC and hit enter.
Once in Device Manager hit the View menu and select show hidden devices.
From here, remove each instance of the AMD or Nvidia card you see as well as each unknown device. Exit Device Manager and reinstall the latest drivers you can find for your graphics card.
After you install the drivers, reboot and see if you get any different results.
If the above solved your problems and the Graphics Card is now working and is now being properly detected/displayed in Windows Device Manager:
If your graphics card is now being detected by Windows 8.1 in Device Manager, but has a "yellow exclamation" mark (or video drivers are not found or not properly installed or the device is disabled) then install the latest graphics card drivers and proceed with this Step-by-Step Tutorial on how to install AMD Radeon graphics card drivers in Windows 8.1 Pro.
Method 3:
If methods suggested above does not help, I would recommend you to contact Apple/AMD/NVIDIA to get the latest chipset, BIOS, graphics card drivers installed properly.

This tutorial is a step-by-step tutorial on how to "fix" issues of a new graphics card not appearing in Windows 8.1 Pro, or not appearing (as a device) in Device Manager, or it's not being detected by Windows 8.1.
This is the "second part" of a Step-by-Step Tutorial on how to install AMD Radeon graphics card drivers in Windows 8.1 Pro.
GRAPHICS CARD IS NOT DETECTED AND DOES NOT SHOW UP IN WINDOWS 8.1 DEVICE MANAGER
This problem can appear if the video card is not installed properly in the PCI slot and as a result the card is not detected in device manager. Check the physical connections again, reinsert the card properly in the PCI slot, check the connections (including the power cables going to the video card, and ensure that the fan on the graphics card is spinning and the card does have power and is properly seated/inserted) and then install the drivers from the manufacturer’s website.
If the video card is in fact installed properly, but the problem of the video card not being discovered/found by the operating system persists, then try these following methods below to check if this solves the problem.
Method 1:
First, I would suggest you to run the following Microsoft Fixit to get the problem automatically detected and fixed. This Microsoft "fixit" App checks if the device is currently disabled or turned off or the driver is not installed.
Hardware devices are not working or are not detected in Windows.
http://support.microsoft.com/mats/hardware_device_problems/en-us
Method 2:
Sometimes, some devices in device manager are hidden due to corrupt or missing drivers.
Follow the steps below to show hidden devices in the device manager and troubleshoot accordingly.
Press the Windows key + X
Select Command Prompt (Admin)
Type set devmgr_show_nonpresent_devices=1 and hit enter
Type Start DEVMGMT.MSC and hit enter.
Once in Device Manager hit the View menu and select show hidden devices.
From here, remove each instance of the AMD or Nvidia card you see as well as each unknown device. Exit Device Manager and reinstall the latest drivers you can find for your graphics card.
After you install the drivers, reboot and see if you get any different results.
If the above solved your problems and the Graphics Card is now working and is now being properly detected/displayed in Windows Device Manager:
If your graphics card is now being detected by Windows 8.1 in Device Manager, but has a "yellow exclamation" mark (or video drivers are not found or not properly installed or the device is disabled) then install the latest graphics card drivers and proceed with this Step-by-Step Tutorial on how to install AMD Radeon graphics card drivers in Windows 8.1 Pro.
Method 3:
If methods suggested above does not help, I would recommend you to contact Apple/AMD/NVIDIA to get the latest chipset, BIOS, graphics card drivers installed properly.

Hi, I loaded Windows 7 Pro w/XP mode and iMac USB show working properly in device manager, but i cannot see a USB flash drive, or my Mac Superdrive. Does anyone have a suggestion? Thanks!

Hi, I loaded Windows 7 Pro w/XP mode and iMac USB show working properly in device manager, but i cannot see a USB flash drive, or my Mac Superdrive. Does anyone have a suggestion? Thanks!

MacDrive to provide better HFS support.
And to acces and write.

My Laptop Pavilion 9700 will not recognize DVD/CD drive. Does not show up in Device Manager

My laptop Pavilion 9700 will not recognize the DVD/CD drive:
The drive does not show up in the Device Manager’s list: The disk spins and the light is on: Use a
paper clip to open the door; I updated
to Sevice Pak 2 recently, but I am not sure if this has anything to cause this
problem: Please Help, anyone!
Thanks

Hi,
Follow the procedure on the link below to create a bootable Ubuntu CD and follow the steps in Part 3 to 'Try it' to see if this OS will run from the CD without the need to install on your HDD. This will show whether the problem is with Windows or a Hardware problem with the optical drive.
http://www.ubuntu.com/desktop/get-ubuntu/download
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Equium P200D PSPBNE: device manager does not show the DVD-RW DVR-K17A ATA DVD/CD

Hello experts out there i need urgent help!!
My Equium P200D all of a sudden it decided to show the DVD/CD Drive in device manager as no longer working due to a corrupt driver??
I am running Vista Home and despite deleting the drive and trying to update the driver nothing seem's to work can anybody help i am getting to the point of throwing it out of the window.
Regards
Stephen

Hi dude
This issue is known to me it happened to me too
The problem is you Windows registry!!!
One registry entry is corrupt and therefore the CD/DVD ROM does not work as I should.
So what to do.
Firstly remove the driver from the device manager. Just simply delete it.
Then access the registry and and remove the Upperfilters and Lowerfilters values completely from the following registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
Then reboot the notebook.
Check it out

Does Cisco Fabric/Device Manager 5.0(4d) run under VM?

Similar Messages

Maybe you are looking for