Does Cisco NAC support for HP Switches

Dear all,
the existing network has HP switches , is there any way i can deploy Cisco NAC solution here ?
Pls revert .
thanks ,

Cisco NAC has lots of limitations, and surly this is one of them. But while I respect the fact that cisco will not support NAC on HP switches. It can work. And it will perform just fine, once you understand “Cisco NAC” and able to configure it for the first time, you will be able to support it without the need of TAC.
The idea is that Cisco NAC sends commands to the switches on the network to apply specific access list or Vlan changes, since Cisco can only speak Cisco, it does not know how to tell other switches to do that. . The work around is that you would have the NAC running in in-line mode on your network, yes this will introduce a bottleneck, but that is the only way to do it. The NAC then will look at the traffic based on the MAC or IP and apply set of policies depending on the source or the destinations.
Please do your research and look at other NAC solutions before you decide the best vendor to go with.

Similar Messages

Does Cisco NAC support Wireless LAN?

Hi There
I know Cisco NAC supports Wireless LAN. I have deployed this myself with various brands of Autonomous APs. These works fine only in in-band mode, not in out-of-band mode.
However, Cisco did mentioned for Cisco AP, with Cisco NAC and Cisco switches, out-of-band is supported. I tried this today, and it's either Cisco is wrong, which is highly unlikely, or I did not configure either the NAC portion or the Cisco AP correctly, which is most likely? I wonder where did I go wrong? Please somebody, advice me on this?
Regards,
Ram
+6012-2918870

Hi Ramraj,
You can do out-of-band with Wireless deployments now, however you must have a Wireless Lan Controller managing your APs. You cannot do it with standalone APs.
The guide below goes through most of the configuration:
http://www.cisco.com/en/US/products/ps6128/products_configuration_example09186a0080a138cc.shtml
Thanks,
Nate

Does Cisco NAC Support Continuous Posture Assessment ?

Hi all,
Cisco does not seem to support continuous posture assessment when running out of band or in band ? What I mean is after authentication during authorization phase I ve been assigned to a role and according to that role I receive a posture result, if that posture result is pass then Ive been evaluated as a healthy end point and receive a Certificate. Then the switchport that I am connected to gets assigned to the corporate VLAN. Afterwards till my certificate expires system will always think that I am healthy.
Ive gone through 4.8 release notes, it still does not seem to be supported ?
Any comments are appreciated.
Dumlu

I think this is mentioned in the release notes; did you check the following section?
http://www.cisco.com/en/US/docs/security/nac/appliance/release_notes/48/48rn.html#wp1105597
Regards
Farrukh

OK, as always I waited before downloading a new OS and I sure glad I did. On the APP store I sorted comments by most critical...and WHOA...what is Apple doing? No support for Logic 9, MS Office? Is Apple only trying to reach the iphone/iTouch crowd? HELP!

OK, as always I waited before downloading a new OS and I'm sure glad I did. On the APP store I sorted comments by most critical...and WHOA...what is Apple doing? No support for Logic 9, MS Office? Is Apple only trying to reach the iphone/iTouch crowd? HELP! I was going to buy a new Mac pro & two 27" monitors but until I see some real problem addressing by Apple...I'll keep what I have and see how everything pans out. If anyone has any comments to ally my fears, I welcome them. I've been a devoted Mac user since 1993. 7500; G4; G5; and my latest Mac Pro...Where do I go? Again...HELP!

Hi there,
If you look through ALL the reviews, they are mainly good. I feel that Lion is an excellent upgrade, although not essential.
There have been some issues with MS Office, but right now, it is up to Microsoft to issue a Lion compatible update, which will come in time. Saying this, MS Office has been working fine on my mac, it seems to be an isolated issue.
Logic 9 seems like a strange issue. Again, an update looks to be coming soon, with Lion support.
I do not feel that apple only focusing on the iPhone and iPad user base. There are many features carried along, but the machine can still be used for pro tools and use just as well. It still is a fantastic, reliable, fast, easy to use OS, which I have had very few problems with. Some additions you may not use, but they don't get in the way. You will love the new Exposé, Mission Control, as it is great for pro users who have many windows open at once, and the new spaces. You may however, never use Launchpad, but you don't have to, just drag it away from the dock!
I really reccomend buying a mac with Lion, although if you are worried about bugs, wait a few months for the issues to be ironed out, and updates to be given. Because the update is so very cheap, I really think you can hardly go wrong. Try it out with your current mac, and if you like it, go ahead and buy your new ones.
Lion is fantastic, albeit maybe rushed.
Any other queries, just ask,
Nathan

Why does firefox drop support for a plugin with an update

Why the H*ll does Firefox drop support for a plugin when there is an update in Firefox.
FF4 has reported that 6 of my plugins that work fine in 3.6 are now not supported. !! This is a joke, and happens regularly.
As a user (a highly IT literate one) this is annoying and frustrating, and from a design standpoint, unprofessional.

Plugins as in Flash, Java, quicktime or such or do you mean Extensions ?
Plenty of Plugins seems to be detected and in use by Firefox 4.0 just fine according to your system details by your post.
If you meant Extensions then check for updates, look at addons.mozilla.org or the Extension homepage for to see if the author has provided a update.
Generally Extensions can need anywhere from a simple maxversion bump to a lot more for it to work properly on a new Major version of Firefox depending on what the Extension does.
It is professional actually as extensions that were not actually compatible may actually cause problems big or small if they were to still just ''work'' in a new Major version release so hence the need for them to be properly up to date on any changes and hopefully the extension author is quick about it.

Does jdk1.6 supports for MAC os also?

hi,
does does jdk1.6 supports for MAC os also? becuase we have implemented some of the methods of jdk1.6 in my application.for example to find the free space i used getFreeSpace() method of jdk1.6.like this i used some the methods of jdk1.6.
please clarify me regarding this?
how can we free space of windows,linux and mac os with java1.4 or 1.5?
does it possible with java to find the free space?
if not with which one can we find the free space windows,linux and mac os ?
i think with native code it is possible.
i f any person already impleamented to find the free space of windows,linux and mac o/s please give me the code.
thanks,
prasad

I gave you some time to either edit one of the duplicate posts out or point one to the other by posting a simple link, like this:
THIS IS A DUPLICATE POST. PLEASE DO NOT REPLY HERE -- reply to the other one instead at:
http://forum.java.sun.com/thread.jspa?threadID=5204340
But I guess it's too much to ask for you to have done that yourself, eh?

Rep. does not have support for Oracle Designer

We're new to SCM and just useing SCM with JDeveloper.
Sorry for newbie stupidness. Searches of this forum didn't
turn up any hits on 21247 or other strings.
Given: brand new install of SCM. Created a private workarea
with RON. Attempting to use RAU to enable branching and
versioning.
I'm having some chicken-vs-the-egg problems. I can't
enable branching in my shared workarea with RAU because it
seems to want to pop up the Migration Dialogue and then
this error occurs:
CDR-21247: Error Cannot proceed!
The target repository does not have support for Oracle Designer
objects
Any help or tip would be greatly appreciated.

Curt,
If you managed to create a private workarea from the RON then versioning is enabled. You would have enabled this from the RAU.
Oracle 9i JDeveloper release candidate provides a wizard to create the workarea and private branch.
There are now two flavours of the repository, one with Designer + file and folder support and one with just files and folder support.
If you have no structured Designer components you do not require the Designer support to use JDeveloper with Oracle SCM.
I suggest you try the JDeveloper wizards. The RAU also offers a menu to examine repository object state. Check that you have no invalid
objects, they can be recompiled using the RAU.
David

Does LabVIEW have support for entering Urdu language script?

Hi All!
My LabVIEW application requires users to enter their observations in a string control which is then stored in an excel file.
Now the issue is that the user wants to enter the data in Urdu language.
Now my question is, Does LabVIEW have support for entering Urdu language script in a string control?
If yes how can I implement this? If no, is there any possibility that National Instruments could extend some help in this regard upon request?
Regards,
Reeves

My experience from Hebrew, which is also right to left, is that it can be done if the operating system supports it, but it will work badly if you include anything in the text which is not an Urdu letter. This causes it to be displayed in the wrong side of the control and is only solved if you add more Urdu text after it.
One option you can try is including an ActiveX control (such as the rich text box) for editing the text and then you can probably get the text from it using a property. I don't remember trying it (my users don't usually need to input Hebrew text themselves), but I think it should work. I wouldn't have any hopes for NI doing anything about this, because it's considered to be a relatively small market.
Try to take over the world!

IS Prime DCNM support for 2960 switches

Hi All,
There is a requirement for a NMS solution, Solution must have a single dashboard
but in the netwroks i am having 2960s, N2K, N5K, N7K, in order to mange this data-center network
do I need to quoted for Cisco LMS and DCNM or LMS is enough

The most comprehensive single product solution for those set of devices would be LMS. It does have limitations in managing the User Tracking, VLAN (provisioning primarily) and SAN aspects of the data center switches. Note Nexus 2ks are not separately managed, but rather viewed as an integral part of their controlling 7k or 5k.
LMS Catalyst 2960 support described here.
LMS Nexus support described here.
DCNM is not really designed for IOS-based devices. It has some very limited support for the Catalyst 6500 but other than that it is primarily focued on the NX-OS-based data center products. See the DCNM Release Compatibility Matrix for more details. (And add the DCNM 6.1 release notes updates.)

Why Apple does not offer support for linux?

We all know the history of Apple. It clearly shows a trend to be open source, excepting for the licenses they share with Microsoft. In my personal case, I love open source because it has solved several of my problems. Just to share this with everyone, I am the network manager of a educational institution and I used to have my servers running on windows platform. Since we used to buy it all from Microsoft, they would give us free software for or labs, software like Visual Studio. They even assigned us engineers to plan everything for our servers, free of cost. Guess what? It was a disaster. We had our database destroyed by an external attack. We were “lucky” to have Microsoft in our servers and in our firewalls.
We had to take action, so I decided to switch to Debian, and to use IPCOP (a great dedicated firewall, if there is anyone interested, the link is: http://ipcop.org/ , please note, I am NOT affiliated with them, and I will receive no compensation or benefit if you chose to access it or not ). Both open source. The result, no external attack has been able to pass trough. After that, we switched most* of our e-learning platforms to open source, and guess what? We are saving over 60,000 yearly just in software. So for those who are looking for a good way to get good security without loosing an eye, try open source.
Now back to the point, I do not fully support any operative system. They all have their good features, or at least they should. The ones I know, are because I use them. My home network is composed by computers running in five different versions of Linux, two running in Mac OS X Tiger, and some others running in XP pro. My main computer is running in Ubuntu, and is really sad to see that there is no software from apple available for Linux. That is honestly the worst part of Linux, having no iTunes or QuickTime available. No way to see multimedia in the web, etc. A suggestion for apple would be, give support for Linux, there are a lot of us wanting the same.

Apple makes software and hardware. Therefore they
offer a total solution. Now they even can have
windows xp running on their hardware. Making a
version of mac os to run on linix isn't practically.
Under a mac is unix and you can run unix software
with the mac so you could do ever thing you are
doing with a mac.
I did not know Linux was one type of computer, like Mac...
Next topic, If I was willing to pay for it, this thread would not exist, because I can actually use a commercial software to adapt the windows web plug ins to Linux... If I was in charge of Apple, I would propose to develop free software support of my products, - plug ins and so - to other operative systems... But of course, even if I did, it would not be up to me. It would have to pass trough several layers of bureaucracy, and it would take a lot of time to be approved or rejected.
Anyway, the main issue is, the three most important OS's are Windows, Linux, and Mac. And that can't be denied. Now you can even run Windows in a Mac PC, and vice versa... besides being fancy, what else could I do with a Mac PC using Windows, when I can build a machine able to run Windows for less than 300 bucks? OK if you want to try a Mac in a i386 or a x86... but I still rather to be the proud owner of a PowerMac G5 than the owner of a Pentium 4 / AMD using Mac OS.
Also, I thought it would be fun to see the reactions and opinions of other people with this topic, hence, I was not expecting anyone from Mac to read it, and really do something about it, because I know they won't.

Does Cisco NAC Appliance deployment require CS-ACS?

I've gone through all the partner training on the Cisco NAC appliance and mgmt station, and CiscoSecure ACS 4.0+ is mentioned just about everywhere in the user verification steps.
If a customer does not have CSACS, or AAA for that matter (say in just a MS Exchange environment), the NAC appliances can still be used, correct?
I'm assuming they can, but that leads to if any functionality/checks would be lost in that case, and if so, what?
Anybody have any ideas on that?
Thanks!

Yes, you could use NAC with the local database for a client demonstration. This is actually my preferred method.
Of course, you would lose the central management functionality which comes with ACS or a hook to Active Directory via KTPass (This command-line tool enables an administrator to configure a non-Windows Server 2003 Kerberos service as a security principal in the Windows Server 2003 Active Directory).
Though by all means deploy NAC, even if you are simply want to demonstrate its functionality. Configure the authentication portion last, after your customer is happy with the demonstrated results.
Hope this helps.

CISCO 3750X stacking for 5 switches , only 4 switches are coming in stack

Dear All,
I have 5 cisco 3750X switches ,but only 4 switches coming up 5 switches i am unable to see .
Connection for the switch :Please find the attached snapshot for the stack data connection .
Also find the snapshot for the stack power connection .
Please provide your assistance and support to overcome this issue .

Dear Marvin,
Thanks for your reply.
is my connection provided in attachment for data stack are ok .
i login to Switch # 5 through console
following is the result :--
switch: ?
? -- Present list of available commands
arp -- Show arp table or arp-resolve an address
boot -- Load and boot an executable image
cat -- Concatenate (type) file(s)
copy -- Copy a file
delete -- Delete file(s)
dir -- List files in directories
flash_init -- Initialize flash filesystem(s)
format -- Format a filesystem
fsck -- Check filesystem consistency
help -- Present list of available commands
memory -- Present memory heap utilization information
mgmt_clr -- clear management port statistics
mgmt_init -- initialize management port
mgmt_show -- show management port statistics
mkdir -- Create dir(s)
more -- Concatenate (display) file(s)
ping -- Send ICMP ECHO_REQUEST packets to a network host
rename -- Rename a file
reset -- Reset the system
rmdir -- Delete empty dir(s)
set -- Set or display environment variables
set_bs -- Set attributes on a boot sector filesystem
set_param -- Set system parameters in flash
sleep -- Pause (sleep) for a specified number of seconds
type -- Concatenate (type) file(s)
unset -- Unset one or more environment variables
version -- Display boot loader version
switch: version
C3750E Boot Loader (C3750X-HBOOT-M) Version 12.2(58r)SE, RELEASE SOFTWARE (fc1)
Compiled Tue 26-Apr-11 06:59 by abhakat
switch: boot
Loading "flash:/c3750e-universalk9-mz.122-58.SE2/c3750e-universalk9-mz.122-58.SE2.bin"...flash:/c3750e-universalk9-mz.122-58.SE2/c3750e-universalk9-mz.122-58.SE2.bin: no such file or directory
Error loading "flash:/c3750e-universalk9-mz.122-58.SE2/c3750e-universalk9-mz.122-58.SE2.bin"
Interrupt within 5 seconds to abort boot process.
Boot process failed...
switch:
All other 4 switches i can see in stack but not these switches and also the status light for this switches is blinking green please provide your assistance .

Cisco ASA support for PBR

Does anyone know if Cisco has the PBR feature road mapped for future IOS releases or if they are building in new feature sets to load balance 2 different ISP connections much like F5. It seems more and more customers are asking for all in one functionality from their NextGen firewalls and the ASA seems to fall short in this category.

As of right now, you can do PBR on the ASA when the ASA is in a cluster. I am uncertain if there will be support for PBR or loadbalancing on a standalone ASA in the future.
http://www.cisco.com/c/en/us/td/docs/security/asa/asa90/configuration/guide/asa_90_cli_config/ha_cluster.html#pgfId-1943033
Please remember to select a correct answer and rate helpful posts

Does Cisco ASA support android ?

Dear all,
Does Cisco ASA 5505 support android ? for smartnet phone and other systerm use anddroid.?
Best Regards,
Rechard

Rechard,
Just adding my two cents:
ASA and Native L2TP-IPSec Android Client Configuration Example
Android and L2TP/IPsec Clients
AnyConnect Mobile License
HTH.
Message was edited by: Javier Portuguez

Can Cisco 7200VXR support for VPLS?

Hi all,
I check Cisco Nagivator Feature to find which IOS support for VPLS on Cisco Router 7200VXR and found that IOS image "c7200-spservicesk9-mz.122-33.SRD.bin" can do it as below;
- VPLS Autodiscovery, BGP-based
- VPLS Multiple VCs per Spoke
When I try to configure Virtual Forwarding Instance, it's not allow me to configure the above features (VPLS Autodiscovery: BGP Based, Manual Configuration of VPLS) and only support point-to-point configuration mode you can see it as below
R1#show version
Cisco IOS Software, 7200 Software (C7200-SPSERVICESK9-M), Version 12.2(33)SRD, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2008 by Cisco Systems, Inc.
Compiled Thu 23-Oct-08 12:58 by prod_rel_team
R1(config)#l2 vfi ?
WORD VFI name
R1(config)#l2 vfi VPLS_A ?
point-to-point Point-to-point configuration mode
R1(config)#l2 vfi VPLS_A point-to-point ?
<cr>
R1(config)#router bgp 100
R1(config-router)#bgp router-id 150.1.1.1
R1(config-router)#neighbor 150.1.12.2 remote-as 100
R1(config-router)#neighbor 150.1.12.2 update-source lo0
R1(config-router)#address-family ?
ipv4 Address family
ipv6 Address family
l2vpn Address family
nsap Address family
vpnv4 Address family
vpnv6 Address family
R1(config-router)#address-family l2vpn ?
vpls Address Family modifier
<cr>
R1(config-router)#address-family l2vpn vpls ?
<cr>
R1(config-router)#address-family l2vpn vpls
% BGP: Error initializing topology
R1(config-router)#
I can use "l2 vfi VPLS_A point-to-point" for Layer 2 VPN Pseudo-Wire Switching but not for VPLS multipoint configuration mode. Can Cisco 7200VXR support VPLS on this IOS image? If it can't, which IOS image can do it on this platform.

VPLS is not supported on 7200, you can configure point to point here but not point to multipoint, you will have to move to 7600 for that.

Does Cisco NAC support for HP Switches

Similar Messages

Maybe you are looking for