Does Cisco Prime have support for HP Access Points?

I am trying to sell a solution to a client with dozens of large warehouses with a large existing HP wireless solution. I want to sell them on a Cisco wireless solution involving Prime to manage/monitor their current HP Access Points while we do a phased replacement to Cisco WLC and APs.
I cannot find listed in the documentation whether Cisco Prime has support for the HP access points though. I see it has 'some' support listed for some Aruba controllers, but not anything else.

I am trying to sell a solution to a client with dozens of large warehouses with a large existing HP wireless solution. I want to sell them on a Cisco wireless solution involving Prime to manage/monitor their current HP Access Points while we do a phased replacement to Cisco WLC and APs.
Prime will only support products with a "Cisco" logo.
Note: Prime 2.2 will start supporting Meraki product.

Similar Messages

Does Cisco Prime Infrastructure supports monitoring CPU,Memory, HDD for UCS , VMWare?

Does Cisco Prime Infrastructure supports monitoring CPU,Memory, HDD for UCS , VMWare?

Prime Infrastructure/ Assurance is positioned today more towards managing network elements and network performance, rather than server infrastructure. We are in the process of adding Datacenter component support, with more focus on Nexus and UCS- due later this year.
Having said that, Prime Infrastructure allows the system user to add custom SNMP polling templates, which can then be used for polling any SNMP based values from any SNMP enabled device. These can be used to collect the information you specified below and the polled information will be available in dashboards and reports.

Does Cisco Prime have a replacement product for NCM or Network Compliance Manager?

Does the Cisco Prime application development team have a product that replaces the NCM or Network Compliance Manager?

Both Prime and LMS can do baseline compliance, after a fashion. LMS's is much more mature in my estimation. Prime is more around the lines of deploying templates.
The regulatory compliance functions as of now are in only LMS's Compliance and Audit Manager (CAAM) function. It's quite useful, matching the baseline compliance features.
An LMS license is included with PI, but it does need to be on its own server (or separate VM).

Does Dreamweaver CS5 have support for if-then radio buttons?

Does Dreamweaver CS5 have a built in option to create an if-then radio group?
For example you have a question that includes a yes/no radio group. If yes is selected then a 2nd question dynamically pops up with its own radio group. If no is selected then no additional question pops up.
An example might be:
Would you like to purchase tickets? [yes/no]
If yes then would you like those to be season tickets? [yes/no]

Natively, no. But you could probably find some commercial extensions that give you similar capability - have you looked here?
http://www.dmxzone.com
It wouldn't be too hard to do this using DW behaviors, either. For example, using the change property behavior, you could do this -
<script type="text/javascript">
function MM_changeProp(objId,x,theProp,theValue) { //v9.0
var obj = null; with (document){ if (getElementById)
obj = getElementById(objId); }
if (obj){
    if (theValue == true || theValue == false)
      eval("obj.style."+theProp+"="+theValue);
    else eval("obj.style."+theProp+"='"+theValue+"'");
</script>
</head>
<body>
<form id="form1" name="form1" method="post" action="">
<p>
    <label>Would you like to purchase tickets?</label>
      <input name="RadioGroup1" type="radio" id="RadioGroup1_0" value="yes" onclick="MM_changeProp('foo','','display','block','P')" />YES <input type="radio" name="RadioGroup1" value="no" id="RadioGroup1_1" /> NO</p>
<p id="foo" style="display:none;">
    <label>Would you like season tickets?</label>
      <input type="radio" name="RadioGroup2" value="yes" id="RadioGroup2_0" />YES <input type="radio" name="RadioGroup2" value="no" id="RadioGroup2_1" /> NO</p>
    <br />
    <br />
</p>
</form>

Cisco Prime LMS 4.1 - Do access points use up a node count license?

Hi Everyone,
I wish to purchase Cisco Prime LMS 4.1, particularly Cisco part # R-LMS-4.1-500-K9 which support 500 Cisco nodes.
We have about 360 Cisco switches/routers/ASA/FWs/WLCs so the 500 nodes license would seem to suffice for now & for future growth.
We also have about 200 lightweight APs that are managed & monitored by our WLC/WCS/Navigator environment.
According to the device support documentation for LMS, it supports and I assume will auto-discover these APs.
Does that mean these APs will use up node licenses on LMS even though management of the APs is done by WLC/WCS? If so is there an easy way to suppress discovery of APs by LMS so we don’t have to purchase extra node licenses for LMS? Or, does LMS offer additional support features for wireless APs not already offered by WLC/WCS/Navigator?
Just trying to understand how many network node licenses for LMS I have to purchase.
Thanks in advance for your help,
Ian.

Thanks but I just heard back from my Cisco SE and he assures me that an AP will NOT use up a license.
I've asked him to verify his answer for me.
Is your answer based on real world expereince (the best there is)? That is, are you running Prime LMS 4.1 and does it indeed use up a license for each light-weight AP it discovers & manages?
Thanks for mentioning options 1-3 but I do not wish to employ any of them. I don't mind buying the additional licenses for APs ... I just need to know if I have to or not.
Ian.

Does Adobe even have support for subscribers?

I have AfterEffects CC and after effects takes 3-5 mins to launch after double-clicking the icon.
Constantly "connecting to dynamic link server" in Media Encoder.
Exporting from AfterEffects to Media Encoder either takes 10 mins and sometimes the project still won't show up in the ME queue, or ME doesn't open.
These issues have been going on for better part of a year. No updates have resolved the problems.
What is a paying customer supposed to do? Really, I mean professionals all over the world use these products and can't get support? The online chat is not available despite the fact that chat hours are advertised. and the 800# to call them is missing the last digit! 1-800-xxx-xxx instead of 1-800-xxx-xxxX.

Hi RZ Performa,
Can you click this link: Contact Customer Care
Then click the big blue button.
Do you see the phone number now?
Thanks,
Kevin

Does OID Chaining have support for SSL

I am interested in using the new iplanet directory server chaining feature in OID, but it appears to not support SSL connections to the external host. Does any one know if you can configure chaining to use a ssl connection?

Server chaining currently (10.1.4) doesn't support SSL.
regards,
--Olaf

Does Firefox not have support for unparsed-entity-url() (XSLT stylesheet), if not is there a plan to implement it?

We support a site that generates pages based on XML and XSLT where XSLT uses unparsed-entity-url() but it dont seem to work in Firefox.

By posting on the forum you are asking the wrong people. We are Apple users, not employees. If you want to provide this feedback directly to Apple you should leave the feedback at:
http://www.apple.com/feedback/iphone.html

IOS to LWAPP for 1130AG Access Points

We have initially installed IOS-based 1130 APs. If we would be upgrading it to LWAPP mode, could we pushed IOS-to-LWAPP upgrade thru the network? what procedures are required?

Hi Leopoldo,
This is possible and fully supported and can be done using the "LWAPP Upgrade Tool". Have a look at the following;
LWAPP Upgrade Tool Troubleshoot Tips
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_tech_note09186a008072d9a1.shtml
Access points must run Cisco IOS Release 12.3(7)JA or later before you use the upgrade tool.
System Requirements
You can use the Autonomous to Lightweight Mode upgrade tool to install Cisco IOS Release 12.3(11)JX on these access points:
All 1100 series access points containing MP21G (802.11g) radios
***All 1130, 1230, and 1240 series access points
All modular 1200 series access points running Cisco IOS software and containing these supported radios:
802.11g: MP21G, MP31G
802.11a: AIR-RM21A-x-K9, AIR-RM22A-x-K9
All 1300 series access points in access point mode
http://www.cisco.com/en/US/docs/wireless/access_point/ios/release/notes/b311jx1.html
Cisco has released a free tool called the "Autonomous to Lightweight Mode Upgrade Tool" that allows selected Cisco Aironet autonomous access point models to be configured for lightweight mode operation.
The Autonomous to Lightweight Mode Upgrade Tool supports the following models:
Cisco Aironet 1240AG Series access points
Cisco Aironet 1230AG Series access points
Cisco Aironet 1200 Series access points that contain 802.11g (AIR-MP21G-x-K9) and/or second-generation 802.11a radios (AIR-RM21A-x-K9 or AIR-RM22A-x-K9)
Cisco Aironet 1130AG Series access points
**Cisco Aironet 1100 Series Access Points that contain 802.11g radios (AIR-AP1121G-x-K9)
Cisco Aironet 1300 Series Access Points/Bridges (AIR-BR1310G-x-K9 or AIR-BR1310G-x-K9-R). A Cisco Aironet 1300 Series operating in Lightweight Access Point Protocol (LWAPP) mode only operates as an access point. This series does not support LWAPP bridging mode.
The Autonomous to Lightweight Mode Upgrade Tool supports a process to migrate an autonomous access point from autonomous mode to lightweight mode. Unlike a VxWorks to Cisco IOS Software upgrade, this process is a Cisco IOS Software upgrade to the existing Cisco IOS Software image-not an operating system "swapout". In converted access points operating in lightweight mode, Cisco IOS Software continues to run on the access point, while LWAPP is used to communicate with a wireless LAN controller. Since LWAPP supports automatic access point configuration, there is no need to retain or convert the original autonomous Cisco IOS Software access point configuration.
http://www.cisco.com/en/US/netsol/ns340/ns394/ns348/ns337/networking_solutions_white_paper0900aecd804f1a23.shtml
Cisco Aironet Access Point Support for Lightweight Access Point Protocol
http://www.cisco.com/en/US/products/ps6521/prod_bulletin0900aecd80321a2c.html
Upgrading Autonomous Cisco Aironet Access Points to Lightweight Mode
http://www.cisco.com/en/US/products/hw/wireless/ps430/prod_technical_reference09186a00804fc3dc.html#wp157147
Hope this helps!
Rob

Does the IE CS6 version have Support for the Middle Eastern tool set? - left to right typing etc.

Does the IE CS6 version have Support for the Middle Eastern tool set? - left to right typing etc.

I assume IE means International English, as opposed to English North America (aka US English). There is Middle Eastern and Hebrew support via an English user interface for programs that support it such as InDesign.
You can change the install language by launching the Adobe Application Manager and clicking on your name in the top left to bring up a context menu. From the menu select Preferences and then click the drop down for Languages. See the screen shot below:

Rep. does not have support for Oracle Designer

We're new to SCM and just useing SCM with JDeveloper.
Sorry for newbie stupidness. Searches of this forum didn't
turn up any hits on 21247 or other strings.
Given: brand new install of SCM. Created a private workarea
with RON. Attempting to use RAU to enable branching and
versioning.
I'm having some chicken-vs-the-egg problems. I can't
enable branching in my shared workarea with RAU because it
seems to want to pop up the Migration Dialogue and then
this error occurs:
CDR-21247: Error Cannot proceed!
The target repository does not have support for Oracle Designer
objects
Any help or tip would be greatly appreciated.

Curt,
If you managed to create a private workarea from the RON then versioning is enabled. You would have enabled this from the RAU.
Oracle 9i JDeveloper release candidate provides a wizard to create the workarea and private branch.
There are now two flavours of the repository, one with Designer + file and folder support and one with just files and folder support.
If you have no structured Designer components you do not require the Designer support to use JDeveloper with Oracle SCM.
I suggest you try the JDeveloper wizards. The RAU also offers a menu to examine repository object state. Check that you have no invalid
objects, they can be recompiled using the RAU.
David

Does LabVIEW have support for entering Urdu language script?

Hi All!
My LabVIEW application requires users to enter their observations in a string control which is then stored in an excel file.
Now the issue is that the user wants to enter the data in Urdu language.
Now my question is, Does LabVIEW have support for entering Urdu language script in a string control?
If yes how can I implement this? If no, is there any possibility that National Instruments could extend some help in this regard upon request?
Regards,
Reeves

My experience from Hebrew, which is also right to left, is that it can be done if the operating system supports it, but it will work badly if you include anything in the text which is not an Urdu letter. This causes it to be displayed in the wrong side of the control and is only solved if you add more Urdu text after it.
One option you can try is including an ActiveX control (such as the rich text box) for editing the text and then you can probably get the text from it using a property. I don't remember trying it (my users don't usually need to input Hebrew text themselves), but I think it should work. I wouldn't have any hopes for NI doing anything about this, because it's considered to be a relatively small market.
Try to take over the world!

Does Cisco UC 500 Support Call Center Outbound Calls?

does cisco uc 500 support call center outbound calls ?

I have developed a "Campaign Dialer" solution for UC500 and CME. More details are available on the website referenced in my profile.

Is cisco prime infrastructure support / can be run as syslog server?

Dear All,
is cisco prime infrastructure support / can be run as syslog server?
and,
where i can see network topology diagram, using cisco prime infrastructure?
many thanks,
Jerri

Hello. Cisco Prime LMS will be replaced by Cisco Prime Infrastructure in the near future.
In the current release of Cisco Prime Infrastructure you can't use topology diagrams. This feature is in roadmap.
About syslog, you can send syslogs to Cisco Prime Infrastructure, but I don't recommend using it as syslog server. Please see this link for more information https://supportforums.cisco.com/thread/2179520
Please rate if this helps

Does iPad air have flash for pictures and video rec.?

Does iPad Air have flash for camera and video rec.?

Do you mean flash the program? or flash as in a camera flash?
The answer to both is no.
Apple products do not natively support the flash program. ANd iPads do not have the LED light for a flash.

Does Cisco Prime have support for HP Access Points?

Similar Messages

Maybe you are looking for