Does Cisco7200VXR support feature Q-in-Q VLAN tag termination?

There is only 10000ESR platform support announced in feature guide and no information in Feature Navigator tool...
http://www.cisco.com/en/US/customer/products/sw/iosswrel/ps5207/products_feature_guide09186a00801f0f4a.html

Hi there,
Well.. it seems this feature has several names:
"Cisco IOS Software Releases 12.3 T - IEEE 802.1Q-in-Q VLAN Tag Termination"
http://www.cisco.com/en/US/products/sw/iosswrel/ps5207/products_feature_guide09186a00801f0f4a.html
"Cisco IOS Software Releases 12.0 S - Stacked VLAN Processing"
http://www.cisco.com/en/US/products/sw/iosswrel/ps1829/products_feature_guide09186a008021b9ee.html
But I can't find any reference to the 7200 having support for it... though many others has it.. mainly switches.. not too surprising.. :)
Did it help?

Similar Messages

  • Does AP1131G support feature 'multiple ssid'?

    Hello
    I've checked in feature navigator and I've seen AP1131G doesn't support multiple ssid feature. It's right?
    If yes, What is replacement AP for AP1121?
    I can't order old good AP1121 so I need good replacement for it.
    Thank you!

    Hi Pavel,
    Just to add a clip to the good tips from Dan and Lucien (+5 points each guys :)
    From the 1130 Quick Start Guide;
    When the access point configuration is set to factory defaults, the first SSID that you create by using the Express Security page overwrites the default SSID, which has no security settings. The SSIDs that you create appear in the SSID table at the bottom of the page.** You can create up to 16 SSIDs on the access point.
    http://www.cisco.com/en/US/docs/wireless/access_point/1130/quick/guide/ap1130qs.html#wp32816
    Hope this helps!
    Rob

  • Does Aperture support deletion of multiple "unnamed" face tags?

    Faces is a great feature.  I love it.
    I have 40,000 pictures in iPhoto.  iPhoto currently does not have a way to select all "unnamed" face tags in a photo and remove them.  I have to click each separate "unnamed" face tag to delete it.  Because of the volume I am working with, without a global delete feature, I am looking at a 100-hour project (approximately 60,000 mouse clicks) to accomplish the deletion of all these "unnamed" face tags.
    I was hoping that Aperture would offer this feature, since it is a Pro app.  I called Apple today and they told me that "No, Aperture does not have this feature, either."
    Does anyone know if Aperture does have a way of doing this?  I tried to get an Apple Aperture support rep on the phone to think "outside the box" today on this, but he couldn't think of anything.
    It just kills me that because I can't select multiple face tags in a photo and mass delete them with a single keystroke or click that I'm facing 100-200 hours worth of work, literally about 60,000 mouse clicks, in order to get rid of all my "unnamed" face tags.
    Thanks for any ideas anyone might have.

    Why is it worth 100 hours of your time to remove them?
    (While I think_if_ there is a way to do what you want.)

  • VLAN Tagging on the ACE 4710 Appliance

    Hello all,
    I have a quick question. How does the ACE 4710 Appliance works with VLAN tagging? I have virtual servers that I am trying to configure behind ACE. The VMs support VLAN tagging. Can I just trunk to link to my core switch and allow the ACE vlans to pass through?
    Your help is greatly appreciated.

    ACE 4710 support dot1q trunkning.
    Configure the interface between 4710 and core switch as a trunk.
    Same between your VMS and core switch.
    Gilles

  • Does WCCP support traffic from different VLANs(mapped to VRFs)?

    Hello,
    I have the following scenario from the WAN to the Data Center and from the WAN to the Branch:
    1. Router 2800/7200 with three (3) MPLS VRFs (VRF Lite)
    2. Switch 3750 with three (3) WAN VLANs (one for each VRF) and three (3) LAN User Traffic VLANs (one for each ASA Context) and one WAE VLAN
    3. WAE with WCCP enabled for one VLAN in the switch
    4. ASA with three (3) Contexts
    5. Three (3) Internal LANs (one for each Context)
    In summary, there are three flows of traffic which are separated along the way from Branch to Data Center. WAEs are working for one VLAN(VRF1) and WCCP is enabled at the 3750 Switch to do the redirection (not in the router). The question is: does WCCP support traffic from different VLANs (similar to inline 802.1Q) and handle all three flows separate? If so, what should the configuration be at the switch and the WAE?
    Thanks.

    The VRF awareness for 12.4(T) is still probably 8-12 months out. VRF aware WCCP features are definitely in the pipeline, but nothing has been publically published on availability timelines.
    It's now publically available on the forum... but , I've only found it on the 3750 and 3550 documentation.
    at the 3750 you will need to place the redirect statement on each of the VLANs, ip wccp 61 redirect in
    Kindly find here GRE Tunnel with VRF Configuration Example:
    http://www.cisco.com/en/US/tech/tk436/tk428/technologies_configuration_example09186a00801e1294.shtml
    I have gotten as far as the WAE registering the router:
    "WCCP configuration for TCP Promiscuous service 61 and 62 succeeded.
    WCCP configuration for TCP Promiscuous succeeded.Please remember to
    configure WCCP service 61 and 62 on the corresponding router."
    wae01#sh wccp router
    Router Information for Service: TCP Promiscuous 61
    Routers Configured and Seeing this Wide Area Engine(1)
    Router Id Sent To Recv ID
    0.0.0.0 209.1.1.1 0000022F
    The router registers the WAE as a WCCP client:
    router04#
    "*Feb 4 18:56:09.892: %WCCP-5-SERVICEFOUND: Service 61 acquired on WCCP
    client 209.1.1.2"
    "*Feb 4 18:56:09.892: %WCCP-5-SERVICEFOUND: Service 62 acquired on WCCP
    client 209.1.1.2"
    The router however cannot figure out what its ID is and does not see
    itself as a WCCP group router.
    router04#sh ip wccp
    Global WCCP information:
    Router information:
    Router Identifier: -not yet determined-
    Protocol Version: 2.0
    Service Identifier: 61
    Number of Service Group Clients: 1
    Number of Service Group Routers: 0
    Total Packets s/w Redirected: 0
    Process: 0
    Fast: 0
    CEF: 0
    Redirect access-list: ACCELERATED-TRAFFIC
    Total Packets Denied Redirect: 0
    Total Packets Unassigned: 25957
    Group access-list: -none-
    Total Messages Denied to Group: 0
    Total Authentication failures: 0
    Total Bypassed Packets Received: 0
    This is a short summary of important commands for working with VRF's.
    View the VRF instances and the associated interfaces.
    ml-mr-c6-gs#show ip vrf
    Name Default RD Interfaces
    blurvrf 100:2 Vlan215
    Vlan326
    tgvrf 100:1 Vlan132
    Vlan325
    TenGigabitEthernet1/1
    ml-mr-c6-gs#
    Show the routing table for a specific VRF.
    ml-mr-c6-gs#show ip route vrf tgvrf
    Routing Table: tgvrf
    Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP
    D - EIGRP, EX - EIGRP external,
    ---More--
    Gateway of last resort is 128.117.243.57 to network 0.0.0.0
    O E2 192.52.106.0/24 [110/1] via 128.117.243.57, 1d19h, Vlan325
    O E2 192.168.150.0/24 [110/160] via 128.117.243.57, 1d19h, Vlan325
    172.17.0.0/29 is subnetted, 3 subnets
    O E2 172.17.1.16 [110/0] via 128.117.243.57, 1d19h, Vlan325
    O E2 172.17.1.8 [110/1] via 128.117.243.57, 1d19h, Vlan325
    O E2 172.17.1.0 [110/1] via 128.117.243.57, 1d19h, Vlan325
    --More--
    Debugging should otherwise be similar to a regular switch or router.
    Final Teragrid VRF Design and Diagrams
    http://www.cisl.ucar.edu/nets/devices/routers/cisco/vrf/final.shtml
    Teragrid Testbed Design
    http://www.cisl.ucar.edu/nets/devices/routers/cisco/vrf/testbed.shtml
    Cisco 4500 Series Switch Cisco IOS s/w config guide 12.1(20)EW
    Configuring VRF-Lite
    http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/12.1/20ew/configuration/guide/vrf.html
    sachin garg

  • Installed graphics card does not support the opengl features recommended

    I've installed FCP6 on my PowerMac (PPC G4 DP 1.25GHz), and when I run it, I get a warning ("...installed graphics card does not support the opengl features recommended...") and the program ends. The graphics card is the ATI Radeon 9000 Pro (64MB)
    I'm looking for a definitive answer regarding my hardware compatibility with FCS2 (specifically, FCP6). I'm NOT looking for an answer along the lines of: your system is too old to run this.
    I've checked the minimum system requirements from the apple website (http://www.apple.com/finalcutstudio/specs/
    and http://www.apple.com/finalcutstudio/download/):
    * A Macintosh computer with a 1.25GHz or faster PowerPC G4, PowerPC G5, Intel Core Duo, or Intel Xeon processor
    * 1GB of RAM
    * An AGP or PCI Express Quartz Extreme graphics card (Final Cut Studio is not compatible with integrated Intel graphics processors)
    * A display with 1024-by-768 resolution or higher
    * Mac OS X v10.4.11 or later
    * QuickTime 7.3 or later
    * DVD drive for installation
    I have all that stuff. What I'd like is to know which component of my system is FCP6 complaining about (vis-a-vis the error message above), alternatively, if someone has had success with a similar configuration, I'd like to know anything they think might help.
    Thanks in advance for any helpful advice you may have.

    The minimum would probably be an nVidia Fx5200 or an ATI 9600...
    Patrick

  • While trying to setup a time capsule backup to my MyBookLive external drive, I got the following error message: The network backup disk does not support the required AFP features. What's up with this?

    While trying to setup a time capsule backup to my MyBookLive external drive, I got the following error message: The network backup disk does not support the required AFP features. What's up with this?

    This means that your NAS does not support the required encryption. Update your NAS to the latest firmware or ditch it and buy a Time Capsule (they are the most reliable when using TM).

  • Preview does not support PDF features

    I have generated a number of PDF files in Adobe Acrobat that are questionnaires. The intent is to have the users fill out forms, click radio buttons and check boxes within the PDF and using buttons embedded on the questionnaire email them back to me. I have run into many problems with my questionnaires by Mac OSX users. It turns out when they open my Questionnaire (PDF) Preview launches instead of Adobe Reader. Evidentially Preview is the default application for PDFs. Preview does not support "calculations" "actions" for buttons including "submit a form" and does not auto font size in the forms they fill out.
    Is there something in Preview that causes this issue that preview users need to do? It clearly appears Preview is not a good substitute for Abode Reader that is free and the standard for PDF viewing.

    Bobbbo wrote:
    The issue I have run into is that Adobe has generated a way that you can distribute forms to a large group of people, they can in return send back the data that they filled out. Acrobat can then tabulate the data automatically. It is a very powerful tool.
    I don't doubt it. However, it is a purely Acrobat solution. I'm sure there is other software that can do the same thing. Have you considered a web site instead? You could build an HTML page to distribute to people and it would have all the same features. Plus, it would work with any web browser.
    The problem I have is Apple has decided to make Preview their default PDF reader application. When a Mac users opens the PDF file things may not work and they do not understand why. They get frustrated and quit filling out the form, therefore locking out getting data from all Mac users. This is an unnecessary burden to put on Mac users!
    Then why don't you pick a method that would work with a stock MacOS X machine?
    Adobe Reader is free so why compete with a free application??
    Adobe Reader is free for end users to download. If Apple included it as part of MacOS X, the would have to pay Adobe many millions of dollars. Furthermore, while Acrobat Reader does have many nice features, it is a slow, bloated behemoth that fewer and fewer people want to use anymore. That is why there are so many other PDF viewers these days - people don't like Acrobat Reader.
    I just think they should not have a fully functional PDF reader as the default application for PDFs.
    Preview is fully functional. But Apple can't read Adobe's mind and support every new feature that Adobe throws in to try to keep customers. Your PDF solution is an Adobe solution. Adobe software just isn't as ubiquitous as it used to be. Times change. I suggest you look into some other method of form distribution, such as HTML and Javascript.

  • Cat0-3750 upgrade. Error: system number 1 does not support the same feature

    I am trying to upgrade or rather downgrade from ipadvservices (inadvertently upgraded to) to ipservices on a stack of Cat-3750s, but I get the following error message:
    Ios Image File Size: 0x00877A00
    Total Image File Size: 0x00B04200
    Minimum Dram required: 0x08000000
    Image Suffix: ipservicesk9-122-37.SE1
    Image Directory: c3750-ipservicesk9-mz.122-37.SE1
    Image Name: c3750-ipservicesk9-mz.122-37.SE1.bin
    Image Feature: IP|LAYER_3|PLUS|SSH|3DES|MIN_DRAM_MEG=128
    Error: The image in the archive which would be used to upgrade
    Error: system number 1 does not support the same feature set.
    Any ideas?
    Chris

    I was having the same issue even with entering the following:
    archive download-sw /overwrite /allow-feature-upgrade tftp://172.18.108.26/c3kx-sm10g-tar.150-2.SE7.tar
    I noticed the image which was running on the switch was correct without the ".bin" at the end:
    3560#sh ver | i image
    System image file is "flash:c3560e-universalk9-mz.150-2.SE7"
    I uploaded a fresh IOS image from CCO and made sure the image name had ".bin" at the end. Seems trivial except the error is produced through a sanity check. See below (please excuse the extra unplugging in the output):
    3560#sh ver | i image
    System image file is "flash:c3560e-universalk9-mz.150-2.SE7.bin"
    3560#$de tftp://172.18.108.26/c3kx-sm10g-tar.150-2.SE7.tar
    Loading c3kx-sm10g-tar.150-2.SE7.tar from 172.18.108.26 (via Vlan1): !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!                             !!!!!!!!!
    Mar 30 01:33:35.480: %USBFLASH-5-CHANGE: usbflash0 has been removed!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
    Mar 30 01:34:15.636: %PLATFORM_ENV-1-FRU_PS_ACCESS: FRU Power Supply is not responding!!!!!!!!!!!
    [OK - 24893440 bytes]
    Loading c3kx-sm10g-tar.150-2.SE7.tar from 172.18.108.26 (via Vlan1): !!!
    Mar 30 01:34:35.593: %PLATFORM_ENV-6-FRU_PS_OIR: FRU Power Supply 2 removed!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!                             !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
    examining image...
    extracting info (100 bytes)
    extracting c3kx-sm10g-mz.150-2.SE7/info (499 bytes)
    extracting info (100 bytes)
    System Type:             0x00010002
      Ios Image File Size:   0x017BDA00
      Total Image File Size: 0x017BDA00
      Minimum Dram required: 0x08000000
      Image Suffix:          sm10g-150-2.SE7
      Image Directory:       c3kx-sm10g-mz.150-2.SE7
      Image Name:            c3kx-sm10g-mz.150-2.SE7.bin
      Image Feature:         IP|LAYER_3|MIN_DRAM_MEG=128
      FRU Module Version:    03.00.78
    Updating FRU Module on switch 1...
    Updating FRU FPGA image...
    FPGA image update complete.
    All software images installed.
    Worked for me, hope this helps.

  • Does OSB support XQuery import module feature ?

    In OSB version 11.1 and Oracle Weblogic Server Version: 10.3.6.0
    I need to create library of XQuery functions (reusable components), to achieve this, I need to use XQuery import module feature.
    When I tried to use it, I got this error message ‘Module feature not supported (sorry)’ …
    Does OSB support XQuery import module feature ?

    You may like to refer Eric's blogpost -
    http://www.xenta.nl/blog/2011/10/19/oracle-service-bus-the-number-of-parameters-for-registered-xquery-resource-system1_to_fault-does-not-match-that-given-to-it-at-runtime/
    Basically, if you are not using a parameter in XQuery then it will not be registered.
    Regards,
    Anuj

  • HT3275 disk does not support the required AFP features.

    i'm using seagate wireless external disk for back-up. disk does not support the required AFP features.

    It's not compatible with Lion.   The software/firmware needs to be updated.  See #C16 in Time Machine - Troubleshooting.

  • The new 5.0 does not support the fox tab feature that I love and I need a similar compatible add on -- which do you suggest?

    I just uploaded firefox 5.0, which does not support the top sites feature I've used so happily. Is there a similar add on that does work with 5.0? I feel like I'm blind!

    The author of the Fox Tab extension has released version 1.4.3 which does, in fact, work with Firefox 5. It hasn't been formally reviewed yet, which is why you don't see it in the extension gallery by default. To get to it, click below:
    https://addons.mozilla.org/en-US/firefox/addon/foxtab/versions/

  • What does your account type does not support the view account feature mean?

    What does your account type does not support the view account feature mean?

    In reference to what? Where are you seeing this message - iTunes? Do you use a credit card for purchases in iTunes or do you download only free content?

  • Does Designer9i support new DB features from 9iR2

    Hi,
    I am using Designer6i and was wondering if Designer9i supports new Database features of Oracle 9iR2.
    So it is possible to define the following new DB features:
    - Table Compression
    - List Partitioning
    - Composit Range List Partitioning
    - Bitmap Join Indexes
    - External Tables
    Thanks for any feedback
    Maurice

    Maurice,
    Designer does not support these features of the 9i database. We have no plans to add this functionality to Designer.
    Please refer to the Tools Statement of Direction, the Designer maintenance release document and the related FAQ on OTN (http://otn.oracle.com/products/designer/index.html)
    Regards
    Sue Harper
    Designer Product Management

  • Network backup disk does not support the required AFP features

    I have a mac mini with two (4T) hard disks each set as target in TimeMachine. Backups have been made on both for some time. This afternoon one of the disks is being rejected as target volume, with the "network backup disk does not support the required AFP features" error.
    The sparse image on the disk that is the actual time machine target shows a modification tim of 13:09, time machine reports the last backup on that volume as made on 13:08. It seems the last successful backup was made at that time. The other TimeMachine target volume on the same min reports a last backup at 15:28
    So why an error now? What has happend in the last hour, or so, to cause the disk to no longer be suitable? Why only on one virtual disk?
    The mac mini runs OS X 10.9.4 (13E28), the disk with the failing backup volume is formatted with Case-Sensitive Journaled HFS+, the still working disk Journaled HFS+.
    This may be related: A couple of month ago  I lost the complete backup on that disk, when time machine conclude that the contents of the target volume was corrupt. At the time I blamed that at a failed backup when I had accessed the mini over ssh using SLINK when traveling. Maybe that conclusion is wrong and this is part of the same problem.
    Any pointers on how to get my second backup disk working again would be much appreciated.
    Eduard de Jong

    The error message has disappeared!
    Earlier this morning the disk has been used as target for a backup by time machine without triggering the error message. A backup 8 hours earlier has also been made to the same sparse image (looking at the folder names).

Maybe you are looking for