Does Compressor 3.5 Conflict With FCE 4 And LiveType?

Last week my Compressor 3.5 app suddenly refused to open.
I tried all the usual remedies including deleting it with FCS Remover but to no avail.
Eventually it was cured by deleting all the FCS 3 apps and reinstalling.
This morning Compressor once again refused to open with the original "There is a problem . . . " error message.
Now I realised I had done something an hour before.
I had just installed FCE 4 and LiveType that comes with it.
I believe I had also done the same before last week's problem.
It looks as though there is something about the installing of FCE 4 and/or LiveType that Compressor 3.5 does not like.
I used FCS 2 together with FCE 4/LT for a couple of years with no apparent conflict.
I have got everything going again by deleting all the FCS 3 apps and reinstalling . . . . not FCE 4 and LT of course!
I'm wondering whether it is caused by both of them or just one . . . . maybe LT.
Perhaps installing FCE 4 and LT before installing FCS 3 would work?
I could find out by experimenting but I think I've done enough reinstalling!

Thanks Jon.
I felt it might be something to do with the older FCE/LT installing outdated shared assets.
A couple of hours ago I successfully installed LiveType without it affecting FCS 3.
I installed it on another Mac and then simply copied the application across. I figured that FCS 3 would probably have already installed any "hidden" files LT would need and I seem to have been proved correct.
I think it will probably work with FCE but I am not feeling quite brave enough today!

Similar Messages

  • Right click with mouse in Word 2013 does not give the list with translate and synonyms etc

    since i upgraded to windows 8.1 right click on words in word 2013 does not open the regular list where you can tap on synonyms and translate. 
    it does work if i touch the screen.
    i moved to mouse mode but it does not help 
    can anyone help...
    i am starting to hate windows 8.1 and word 2013 because of this feature not working

    Hi
    I have tested in my computer and it worked well.
    Normally when we type a wrong spelling, right clicking the word does not give a list with translate and synonyms.
    Check to make sure your spelling is right.
    if the issue persists, Start Word in safe mode to check the issue:Hold "Ctrl" key and click into the program.
    It is also recommended that you do a repair for your Office suites in
    Control panel>Program and features>Office>Change>Repair
    Thanks
    Tylor Wang
    TechNet Community Support

  • Does Production Premium CS6 work with Maverick and the new iMacs

    Does Production Premium CS6 work with Maverick and the new i Macs

    Thankx for your reply. I saw the Apple tech note but that's what Apple says. I just want to know from users who experienced the thing if it really works.
    It doesn't seem so simple if you believe what this site tells (sorry it's in French):
    http://www.macquebec.com/spip.php?article4146
    So: BootCamp worse than the Beta?

  • The Back arrow does not always work, particularly with Amazon and eBay sites.Even the on-page Back arrows do not work either.

    I am using version 15.0.1. Since I updated to this version, the Back arrow does NOT always work particularly with Amazon and eBay. This is particularly evident when I go from a list the result of a search to an item on the lis. I cannot get back to the list even using the On-page Back arrow. I usually have to repeat the search to get back to the list again.

    Hi MorrellMurphy
    probably problem with [http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox Locked or damaged places.sqlite] file
    thank you

  • I'm sorry, I have to convert the mov file. for use with fce and / or imovie11, better ProRes422 or intermediate codec?

    I'm sorry, I have to convert the mov file. for use with fce and / or imovie11, better ProRes422 or intermediate codec?

    FCE only used AIC for HD.
    Al

  • Does anybody have any experience with keyloggers and a good program to detect one on your mac? I think I may have one.

    So yesterday I found out that my email address password had been changed. I don't remember doing this, but it is possible I changed it a while back and considering I keep my email constantly logged in. But at the same time, two of my apps were trying to access their "store". I play a game called League of Legends, which has an online store, and it randomly came up with the message "Could not connect to Maestro" (credit card). Then, Itunes (which I rarely use) came up with "sorry, we could not continue with your purchase". I think it's very strange that all of this happened at the same time, but hopefully it's a case of a forgotten password and two games bugging/crashing. I scanned my entire computer with iantivirus and it hasn't found anything, but I've heard keyloggers can be a bit hard to detect. Does anybody have any experience with keyloggers and if so, what program did you use to detect and destroy it?

    If you think that a keylogger has been installed the only safe thing you can do is erase your drive and reinstall.
    I don't think that is the case however.

  • Gtk-gir conflicts with atk and gtk2 updates [SOLVED]

    When upgrading with pacman -Syu I get the following error:
    error: failed to commit transaction (conflicting files)
    atk: /usr/share/gir-1.0/Atk-1.0.gir exists in filesystem
    gtk2: /usr/share/gir-1.0/Gdk-2.0.gir exists in filesystem
    gtk2: /usr/share/gir-1.0/GdkPixbuf-2.0.gir exists in filesystem
    gtk2: /usr/share/gir-1.0/Gtk-2.0.gir exists in filesystem
    Errors occurred, no packages were upgraded.
    Checking with pacman -Qo /usr/share/gir-1.0/Atk-1.0.gir gives:
    /usr/share/gir-1.0/Atk-1.0.gir is owned by gtk-gir 0.6.5-1
    And pacman -Qi gtk-gir gives:
    Name : gtk-gir
    Version : 0.6.5-1
    URL : http://live.gnome.org/GObjectInstrospection
    Licenses : GPL
    Groups : None
    Provides : None
    Depends On : gobject-introspection>=0.6.5 gtk2
    Optional Deps : None
    Required By : libdesktop-agnostic-gnome-bzr
    Conflicts With : None
    Replaces : None
    Installed Size : 3676.00 K
    Packager : Unknown Packager
    Architecture : x86_64
    Build Date : Tue 23 Mar 2010 05:17:59 PM CET
    Install Date : Tue 23 Mar 2010 05:18:07 PM CET
    Install Reason : Installed as a dependency for another package
    Install Script : No
    Description : GIR interface description files for GTK+
    The dependencies can be tracked up to my installation of aur/avant-window-navigator-0.4-bzr 20100211-1
    I'm stumped. Can you help me get around this problem?
    Thanks!
    Last edited by mattmurdock (2010-04-05 22:59:04)

    @wonder
    Thanks for the tip! It makes sense.
    However, the current PKGBUILD for libdesktop-agnostic-gnome-bzr speaks about dependencies like so:
    depends=('glib2' 'gtk2>=2.20.0' 'gconf' 'gnome-vfs' 'gnome-desktop')
    makedepends=('bzr' 'python' 'pygobject' 'pygtk' 'vala' 'gobject-introspection')
    optdepends=('python')
    conflicts=('libdesktop-agnostic')
    And I still get the build error. I suspect the workaround is to force a removal of gtk-gir but I'm hesitating because I really don't want to break my AWN installation.
    Am I being too cautios - or is there a better way of doing this?
    Thanks!

  • Does ios vpn ondemand conflict with manual vpn?

    I have an ios 7.1.2 device with a vpn configuration profile applied to force a IPSEC vpn on for all internet access.  This works great - when ever I access a web page etc, the vpn springs into life.
    However, if I go to Settings, VPN and manually switch the VPN OFF; and then manually switch the VPN back on again - the VPN no longer works properly:
    -The VPN logo still appears at the top leftside, when the VPN is manually switched back on again
    -However, when I go to a web page I get the message unable to connect to the internet.
    -Specifically, I know that traffic is going to the vpn server, and the vpn server is returning traffic - but it appears the device is unable to handle it.
    Has anyone else come across this use case?  
    I know that if having had the problem, I manually switch the vpn back OFF; and then go to a web page  to trigger the vpn on demand - all is well.
    So its as if there is a conflict between ondemand and manual vpn setting?
    Has anyone else experienced this?  
    Is it a bug or a feature?  Is there anything I can do to avoid it, or having used on demand - do I always have to trigger on demand and never manually?

    I have this same question for IPSec on both iOS and MAC OS X.   Does the built in iOS and MAC OS X VPN client's support IPSec VPN connections where the VPN server's public IPv6 address is used ?     I am getting a server not found error when I try to get this working.

  • Hi - for any photo, info in mountain lion shows a different file size than Photoshop does. I've tested with CS3 and CS6 and get the same problem. Doesn't happen with CS3 and OSX10.4 or any previous versions of Photoshop and OSX. Anyone know why?

    Hi - for any photo, info in mountain lion shows a different file size than Photoshop does. I've tested with both CS3 and CS6 on 10.8.2 and get the same problem. This doesn't happen with CS3 and OSX10.4 or any previous versions of Photoshop and OSX. Anyone know why?

    this one is actually a really rare symptom of a flaky connection to the ipod on a Windows PC. there's more going on in terms of hardware on nanos and 5th gens than in the earlier models ... so if the connection is flaky to precisely the right/wrong degree, itunes will see the ipod, but misidentify it as an earlier version of ipod.
    tracking down the cause of the flakiness can be tricky ... as you already know ...
    just checking. have you tried connecting with a different (known-good) USB cable? does that seem to have any impact on the rate of occurence of the problem?

  • Quality and aspect ratio with FCE and iPhoto

    Project started by importing hundreds of slides shot by different cameras with difference settings. Slides were imported into i-photo where I used the slideshow function to make several segments.  As I was choosing the photos and dragging them into slideshows I cropped them all into 16x9 ratio so they would all be uniform.  I then sent to QuickTime movie using the built in iPhoto export button and selected “custom export” setting with DV/DVCPRO-NTSC compression with quality set to “Best” and aspect ratio to 16x9.
    Then imported into FCE and did serious editing (music, effects, titles, etc.).  When finished I tried exporting as both a QT self-contained movie and QT conversion (using DV/DVCPRO and 16:9) but the quality is terrible and when I make a iDVD the picture is squeezed and distorted into a 4:3 ratio despite the fact that the IDVD is set to 16:9. I have spent over a month on this project and have fellow travelers waiting for my “creative” touch.  Can anyone tell me where I went wrong on both aspect ratio and quality? Thanks.
    PS: Am using MacBook Pro, OS 10.7.4 FCE 4.0.1 and iPhoto-11 9.3.2

    Hi
    I'm not shure - but I can share my thoughts
    I tried exporting as both a QT self-contained movie and QT conversion (using DV/DVCPRO and 16:9)
    I DO NEVER - Use Export as QuickTime CONVERSION
    I DO - Share as QuickTime .mov - straight off
    I had problems with 16x9 until I understood that
    • I had to select type of project as WideScreen in FC
    • Browser Window in FinalCut E and Pro - can extend far to the Right with several Columns. One Column states Anamorphic. When set my material to this. THEN introduced it into TimeLine. Can not be done in after hand.
    • Export as above
    • In iDVD there are TWO places to set 16x9
    - When creating a NEW iDVD Project - SELECT --> WideSrceen
    - In iDVD Project / Projectinfo [ Shift+cmd+I ]- ALSO set 16x9
    Yours Bengt W

  • Spry Conflicts with LightBox and ThickBox?

    i have tried to use both Lightbox2 and Thickbox on a page
    with a Spry dataset and both will not work (they work fine on
    non-Spry pages). It's just a simple gallery-style page. Any ideas
    on how to make them compatible?

    Sorry for the confusion, but I do have it set up correctly on
    my local machine. I only posted the HTML file so you could download
    it. I have all the included files in the right locations here
    (because it works using either SPRY 1.5 or Slimbox when I test it).
    Spry is definitely conflicting with Slimbox. I just made a
    simple test file, got slimbox working and slowly added the Spry
    pieces. It broke when I added the spry:region call in the div:
    <div id="content" spry:region="portfolio_xml">
    I don't understand these people that say they are using Spry
    and Slimbox without issues. Would be nice to see an example.

  • Does N9 support 802.1x with LEAP and have Vietname...

    Hi all,
    I'm from Vietnam and using a N9 phone. I have some question:
    1. Does N9 support 802.1x with LEAP like E-series? When are you launching?
    2. Does N9 support Vietnamese language/keyboard/typing? When are you launching?
    Please inform me soon
    Thanks.

    and how about Lumia serires?

  • [SOLVED] systemd-arch-units conflicts with mdadm and xinetd packages

    Trying to upgrade my testing box today to latest/greatest and running into a file conflict between systemd-arch-linux providing systemd profiles for xinetd and mdadm which also think they control the same files:
    error: failed to commit transaction (conflicting files)
    /usr/lib/systemd/system/mdadm.service exists in both 'mdadm' and 'systemd-arch-units'
    /usr/lib/systemd/system/xinetd.service exists in both 'systemd-arch-units' and 'xinetd'
    Errors occurred, no packages were upgraded.
    Should I just do a force? I am not relying on systemd yet. Or should I just remove systemd?
    Chester
    Last edited by chetwisniewski (2012-05-15 18:17:45)

    silent wrote:So now the new version of mdadm and xinetd moved to [core] and I have the same conflict with systemd-arch-units in [community].
    Try -Syu again?

  • FLY VIDEO 98FM does not work on K7N420 with XP1800 and higher CPU\&acu

    I upgraded my CPU from TB800 to XP1800+. However, this new cpu brought a new problem to my system. My FLY VIDEO 98FM TV card gave up working with 1800+ and 2000+. I tried two FLY VIDEO 98 boards on that system and they both didn't work with XP1800+ & XP2000+.
    Windows recognized the card but, it did not work  ?(
    PS: Cards worked properly with TB800  ;(
    To sum up, I guess it's an incompatibility issue and can be fixed by a BIOS update
    MSI K7N420 Pro(BIOS 2.6)
    Athlon XP1800+
    2x256 MB DDR SDRAM

    what all did you change?
    if it worked on the nforce with the 800mhz... its not the bios..
    the new CPU dose use more power.. so it might be power related
    did you change your windows? change anything els ?
    if you put the 800 in now would the TV card work? you dont need to reinstall windows or anything to change the CPU

  • Conflict with passwords and app purchase

    suggestion and found a phone number for Navigon andI called the PHONE number (866-273-4271) and SPOKE to Britton.
    It seems that Apple has caused some addresses to switch there main ID position. For example my cox.net and Mac.com.
    1.  He had me go into " settings" on my iPhone 4S and down to "Store (iTunes)"   
    2.  Under settings -- Store -- at the bottom is:  " Apple ID: [email protected]  
    Mine said mac.com  and it should have said:  cox.net. Somehow that was changed and NOT by me.
    3.  He had me tap the address and it brought me to the screen that included options such as:  Sign Out. This allowed me to change back to cox.net. I still have two different accounts with iTunes and two different passwords. This problem started when Apple said I needed to strengthen my password by using numbers, letters and CAPS. Up till that time, I had only one password and it worked on both accounts. Now I have two passwords as I said before. A new one for cox.net and the old original password for Mac.com.
    4.  After my iTunes Apple ID was changed back to cox.net I was able (after he had me delete the existing copy of Navigon on my computer), to go to my previous purchases on my Mac computer and download my original purchase made in 2009 ( under cox.net).
    This was an iTunes problem, not Navigon. iTunes should have been able to solve the problem. As I have said many times, this could have been solved on my first contact if we could have spoken to each other on the phone.
    This problem could happen to me again because I have purchased  apps under both accounts.

    Sorry, but I don't think there is a way to fix this. But I believe it only last 30 minutes, at most.

Maybe you are looking for