Does cq5 provide integration with adobe dreamweaver

Hi Everyone,
I would like to know if CQ5 provides any kind of integration with Dreamweaver so that all the content that is created by web-dev team using dreamweaver can directly be imported in Cq5.
Also does cq5 provides and dreamweaver kind of capability, so that web-dev team can develop their content in cq5 itself and would not use dreamweaver.
Thanks

just check some other post in the forum:
http://forums.adobe.com/message/4727699#4727699

Similar Messages

Actionscript / swf integration with Adobe Presenter

I need to do some Actionscript / swf integration with Adobe Presenter content.
Is there any way to access information about current slide nr., total number of slides and "end of presentation" information from swf(Actionscript 3.0) inserted into Adobe Presenter?
I am using Adobe Presenter 8 with Adobe Connect 8.

First, the best place is probably the Presenter forum, which somewhat curiously is under the Connect umbrella:
http://forums.adobe.com/community/connectpro/connectpro_presenter
Out of curiousity, why are you using AICC? Because the content is on a different domain?
To the point, it's great to have a logging or debugging tool for these sort of things to view the communication between the LMS and the lesson. Perhaps the lesson is sending the 'completed' status but also sending some other value that the LMS is using to change the status back to incomplete?
My first suggestion would be to try the lesson in a tool like TestTrack...but I don't think that handles AICC. Does the Saba LMS have any kind of debugger or logging tool you can use? You really need to see if the lesson is sending the status back to the LMS as you suspect it should. If it IS, then the issue lies with the LMS and how it's interpreting that result. If it's NOT, then you can then perhaps figure out what to adjust in the lesson.
In general, just play with the settings. If it's set to Complete/Incomplete and has a Mastery Score, try NOT setting the Mastery Score... And other such combinations.
I hope the folks in the Connect/Presenter forum can provide more insight.
Erik

Compatibility of Microsoft Front page 2003 files with Adobe Dreamweaver 8

Compatibility of MS Front page files with Adobe Dreamweaver 8
We have developed quite few HTML and Gef files in Front Page
and wondering how much work is involved if we want to use
dreamweaver now.
This will be great if you could sned us a document about the
compatibility of Microsoft Front Page with Adobe Dreamweaver 8.
We appreciate your immediate reply.
Thanks
Arshad

> but I don't believe there was much left
> of this in the 2003 version.
Sure there was. It was central to all of FP's enhanced
capabilities.
> won't be editable.
It's much more than not being editable. They will be broken
if you FTP
files to the FP site.
> Pretty much all you have to do is set up a site
definition and point it to
> your current files and you should be good to go.
Technically correct, but woefully understated.
From FrontPage to Dreamweaver (With CD-ROM) by Joseph Lowery
http://www.amazon.com/exec/obidos/ASIN/0789726882/qid=1013348638/sr=1-10/ref=sr_1_10/002-5 917334-6040854
(watch the wrap!)
Before doing anything else, take a couple of weeks to
gothrough the DW
tutorials, and also to study HTML and CSS. The more you know
about those,
the easier your transition will be. DW expects alot more from
you than FP
did, and as a result, you may find it much more frustrating
to have the raw
reality of web development staring you in the face rather
than the wizards
of FP.
> Is there a way to convert a Frontpage site into a
> Dreamweaver site
1. I'd define a Dreamweaver site that points to a location on
your hard
drive for the local site's root, and to the current FP site
on the web as
the remote site
2. I'd use Dreamweaver (if your host supports FTP
connections) to download
the remote site to the root of the site you just defined on
the hard drive.
This will pick up all the pages *after* webbot action so that
shared borders
and all are already present in the page HTML. This will also
pick up all of
the server scripting. Note - in the event that you are not
able to connect
using FTP since some FP hosts block that protocol, you will
have to use a
third party 'site copier' like Black Widow, QuadSucker, or
WebCopier, (or
even the DW extension called SiteAssist from WebAssist) to
connect and
download using http protocols. Doing it this way will *not*
retrieve any of
your server-script code, if any (unless you have used the
WebAssist
extension).
3. I'd create a DW template for the pages, that captures the
"shared
border"
effect you had in FP.
4. I'd copy and paste content from each FP pages to a new
template child
page and then save the new child page with an easily
identifiable
nomenclature that is distinct from what was used on the FP
site (since you
are saving the new child pages into the same local site as
the FP pages).
5. When the basic site is completed, I'd upload the new DW
pages to some
staging area/webspace, and by using the browser, I'd verify
that the site
(as it now exists remotely) is complete.
6. Then I'd create a *new* DW site in a new location on the
hard drive, and
connect to and download all the files from the staging site.
7. You can now delete the original FP site from your local
system if you
want.
You now have a complete site (minus any of the FP extension
server-side
code) that has no FP footprint.
If you have used any FP server extension functions on the
original FP site
(form processing, guestbooks, tables of contents, etc.), you
will have to
recreate those functions in DW using 3rd party scripts, or
scripts that you
write yourself.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"SnakEyez02" <[email protected]> wrote in
message
news:[email protected]...
> Well you should be able to open and edit all of the
documents. You might
> just
> have trouble if you used FP Extensions, but I don't
believe there was much
> left
> of this in the 2003 version. And some other functions
like that which are
> specific to FP won't be editable.
>
> Pretty much all you have to do is set up a site
definition and point it to
> your current files and you should be good to go. If you
have specific
> examples
> of things that you are afraid might not work, post them
for people to
> evaluate.
>

How making a email suscribe with adobe dreamweaver

hallo anyone how to make email suscribe form with adobe dreamweaver for my site http://hargahpsamsunggalaxy.com/

The forum thread below gives and example using php coding how to do what you want:
How to add a simple one-field form in DW

Does apple provide me with an email address?

does apple provide me with an email address?

Yes if you set up an iCloud account
http://www.apple.com/icloud/
http://support.apple.com/kb/HT2623?viewlocale=en_US
http://www.apple.com/support/icloud/

Cs6: am trying with adobe dreamweaver to upload/connect to server, unsuccessfully

I am trying with adobe dreamweaver cs6 to upload/connect to server, unsuccessfully, is it permissions problem? See attachment…?
Manage Sites – Connect
Upload/download – no Connect
Although I cannot PUT/UPLOAD from
http://www.l-web-dev.net/ (http://www.paphoscarhire.mobi/l-web-dev) (from managed Sites I connect success but still cannot upload)
but I can upload to this subweb/subfolder from http://www.paphoscarhire.mobi/ that is parent of above, any suggestion?

Maybe this tech note will help:
http://kb2.adobe.com/cps/147/tn_14787.html
Nadia
Adobe® Community Expert : Dreamweaver
http://twitter.com/nadiap
Unique CSS Templates |Tutorials |SEO Articles
http://www.DreamweaverResources.com
http://csstemplates.com.au/

Does PPBM6 work properly with Adobe's free trial CS6 download?

Does PPBM6 work properly with Adobe's free trial download of Premiere Pro CS6?
Does the CS6 download include the 6.0 level release, or is it the latest version (or at least download patchable to the latest version)?
If anyone has actually done exactly this, please share your experience?
Thanks,
Jim

Randall,
Just a snippet from my mail to Bill about testing results up to now:
MPEG2 results appear to be dependent not on number of cores, but on amount of memory, next to the video card and maybe memory controller. How else would your SB be faster than your 980 with the same video card and 4 cores versus 6? I think 32 GB versus 24 GB is the differentiating factor here, as well as the memory controller on the SB, or am I trying to find explanations that are not there?
Disk I/O is purely a matter of sustained transfer rates. Number of cores is irrelevant here. I don't have sufficient data yet to determine whether amount of memory will be influential, but I assume there is a lower limit when the results will further decrease. We are talking about a 37,092 MB file being written to disk and the sustained transfer rate can be negatively influenced by a limited amound of memory.
MPEG2-DVD as shown above.
H.264 is mainly a factor of number of cores, size of the L3 cache, amount and speed of the memory and clock speed.
MPE Gain is a resultant calculated number. It is hard to interpret, I admit, but in general you will see that the better a system is performing, the lower the Gain figure. Very fast systems can handle software MPEG2-DVD encoding quite well, slower systems struggle with that task, but with hardware MPE even slower systems achieve around the same figure as faster systems and the consequence is that slower systems show a higher gain.
Further notice that the new Total Time figure is only the sum of Disk I/O + MPEG2-DVD + H.264-BR. In the PPBM5 test we included the rendering test as well, but since we no longer use that, it is no longer a part of the Total score. Also, the weighing of test results to calculate the RPI has been adjusted for this new test.
Hope this gives some informative background info.

Problems Creating a "Fluid Grid Layout" with Adobe Dreamweaver CS6

I am trying to create a fluid grid layout in Dreamweaver CS6 (which I know how to do), the problem is Dreamweaver started automatically saving the boilerplate.css & respond.min.js in the Dreamweaver program folder (C:\Program Files (x86)\Adobe\Adobe Dreamweaver CS6\configuration\BuiltIn\Fluid Grid Layout\) it does not ask me to save the boilerplate.css or the respond.min.js docs as it normally does. Dreamweaver CS6 also creates a css document instead of the html page it should create. I called Adobe support, however they offer no support for "Fluid Grid Layouts", and I cannot seem to find a solution to this problem anywhere on the internet. If anyone knows how to fix this so it will work properly again it will be greatly appreciated!

Hi toger02,
If you have restored the preferences correctly and the issue is still unresolved I would recommend checking the workflow again.
Define a new site in Dreamweaver.
File < New Fluid Grid Layout < Create. Doctype set to HTML5 and no CSS file attached.
A dialog box will pop up, prompting you to save the CSS for this design. This is your custom style sheet. Give a "filename.css" < Click Save.
Once you've done that, the layout for the mobile device appears in the design view as an "untitled" new document with related files listed as "boilerplate.css","respond.min.js" and "filename.css" i.e your custom CSS file.
File < Save < "filename.html". < Save. On clicking Save it will show a popup with the message: Copy Dependent Files, which are boilerplate.css and respond.min.js.
I hope this helps else let us know if issue is on all the new sites and fluid grid pages that you create?
Thanks,
Bhawna

System no longer does session restore but when trying to configure, it does not provide me with the option to show windows and tabs from last session

Before I updated the latest version of Firefox, every time the browser shuts down in error, I would get the System Restore feature which was really nice. Now, this no longer happens and when I went to configure this ability, it does not even provide me with the option to select to show windows and tabs from the last session. How can I get the restore session feature working again?

Make sure that you do not run Firefox in permanent Private Browsing mode.
*https://support.mozilla.com/kb/Private+Browsing
*You enter Private Browsing mode if you select: Tools > Options > Privacy > History: Firefox will: "Never Remember History"
*To see all History and Cookie settings, choose: Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
* Deselect: [ ] "Permanent Private Browsing mode"
* http://kb.mozillazine.org/Session_Restore
* https://support.mozilla.com/kb/Session+Restore

Use Adobe CreatePDF integrated with Adobe

Hi
I´m pursache Adobe CreatePDF but when I tried to covert to a pdf from adobe tools is still asking for suscription
Any ideas how to work with Adobe CreatePDF from Adobe reader¿?
Cherrs

Estas en el Foro de usuarios, en español.
Explica tranquilamente el proceso de compra y el resultado, para ver si vemos donde deja de funcionar el proceso. Gracias.

ATG integration with adobe CQ5

Hi,
I am trying to integrate CQ5 with ATG.Could you please How to integrate CQ5 with ATG.
Thanks In advance
Edited by: 940683 on Nov 26, 2012 4:05 AM

I do not know of any connector between Oracle WebCenter Content and Adobe CQ.
I'd also agree that Java integration using RIDC would be your best bet.
Jonathan
http://jonathanhult.com

Can integration with Adobe Bridge be added to the next update to making placing files more intuitive

Running Windows 7. I just thought it would be neat if that feature was added. Thanks!

despite the workaround, it doesn't fix the real problem. It shouldn't be a huge deal for adobe to add support for multiple svn versions. Dreamweaver is the first tool i've used that works with svn that doesn't support several types of svn meta data. If they're going to claim that Dreamweaver supports svn is should actually support svn, the current version, not a version several years old. This should have been among the first patches released, or at least after snow leopard came out (and packaged with it the current version of svn).
does anyone know if the code that handles meta data formatting is something that is human readable, or where it might be, or is it in compiled code.
i signed up for the forums, for the sole purpose of being able to vent about this very frustrating and disappointing situation.

CQ5.5 Integration with Wicket

What is the best possible approach to integrate CQ5 with Wicket?
1) Do we need to Use a OSGI based Wicket Framework like PAX-Wicket ?
2) What are the integration choice avaialbe in CQ5.5 for integrating Web Application like Wicket ?
Can someone share their experience ?
Thanks,
Tejas

As you can use multiple modules within single repository. Ex:- The module settings at [1] This module tries to authenticate a user based on the users stored in CRX. If user is not authenticated it uses next module LDAPLoginModule. If all module could not authenticate then request fails. More details go through below links.
[0]
    http://forums.adobe.com/message/4392687
    http://forums.adobe.com/message/5093607
[1]
    http://wem.help.adobe.com/enterprise/en_US/10-0/core/administering/ldap_authentication.htm l

Does Mountain Lion work with Adobe CS4?

This may have already been asked, but I didn't see it when searching. Sorry if its a duplicate question.
I have the Adobe CS4 Master Suite running on my imac (27" Quad core i7 processor at 2.93GHz with 8GB ram) currently running very smoothly on 10.6.8. I'm thinking of upgrading to 10.8. My question is does the upgrade break or slow down anything in the Adobe CS4 Suite? I mainly use Illustrator, Acrobat and Photoshop for my work and occasionally run Indesign, Fireworks or Dreamweaver (all CS4)
Any help or comments would be appreciated before I buy and download the 10.8 update. If any of the programs I mentioned have issues, are they major or minor?
Thanks!

Yes.
Are my applications compatible?
See App Compatibility Table - RoaringApps - App compatibility and feature support for OS X & iOS.

Squareup integration with Adobe AIR based ios Application

Hi All,
Does anyone is having any experice to work with 'Squareup' i.e. https://squareup.com/
I want to integrate it with my adobe air based ios application.Is there any native extension is available for this?
Any information will be appriciated.
with Regards,
Shardul

Hi, please forget my last message. I was changing so many things I finished using a wrong mobileprovision. That's why I couldn't install the app in the device.
On the other hand I have found the problem. Some changes in one of our ANE were not tested in iOS 5.0.1 devices and it made the app crash because it found a Adobe Air 3.5 bug. Adobe fixed it in AIR 3.6

Does cq5 provide integration with adobe dreamweaver

Similar Messages

Maybe you are looking for