Does CR 2008 work with Crystal Reports Server 11.5

I currently have CRS 11.5 and am using CRXI. I would like to upgrade CRXI to CR2008 (visual advantage), but not upgrade CRS at this time. Does CR2008 work with CRS11.5? Any known issues to be aware of?
Thanks,
Jsr

Unfortunately, CR 2008 is compatible with CR Server 2008 only You could refer to the [CR Server 2008 Supported Platforms|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/90e0d1a4-ae34-2b10-198c-f309bfa21e91]
Kindly refer to the [Crystal Reports Server XI Release 2 Info|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/20d9fe63-396c-2b10-e7a8-efddd1a910f6]
Hope it helps !!

Similar Messages

XCelsius Engage Server 2008 integration with Crystal Reports Server 2008

Hi there....
I am kinda new to XCelsius and am confused with the integration points XCelsius Engage Server offers for 'Crystal Server 2008' users.
The trial install package for XCelsius Engage Server (SP1) has a binary installation for XCelsius and then for Adobe LifeCycle DataServices. The installation document in the distribution does not talk about what the 'engage server' part is? and how it can get integrated to an existing CS 2008 installation ?
any suggestions/pointers would be appreciated. Also is there a document/white paper explaining how this whole family of CS and XCelsius products fits together ?

user12111287,
To answer your question.....No, I do not. But we have run Crystal Reports using P6 data.
As far as I know Crystal Reports only needs a database of some kind in order to do its thing. Are you attempting to set up a "real time" data link (ODBC) to Crystal via SDK?
If not, you could just build your own P6 exports or develop your own reports that would provide the data for feeding Crystal Reports. Maybe set up an automated Job Service task to run a batch of reports on a daily basis.
Hope this helps.
Edited by: p3_scheduler on Mar 25, 2010 1:18 PM

Is Voyager included with Crystal Reports Server 2008 V1?

Hi all,
Is Voyager included with Crystal Reports Server 2008 V1?
Regards,
Janice

Hi
the CRS licensing model does not support Voyager. You may want to consider installing BO Edge or BO Enterprise for this. I would recommend to contact your local SAP sales office to get more information on this.
Regards,
Stratos

Does entourage 2008 work with lion?

Does Entourage 2008 work with Lion? I have heard conflicting reports...
Thanks

Since En'rage does so many things the conflicting reports probably have to do with whether the program is being used just for mail, just for the calendar, or for both. For what its worth, I'm not happy with the 2011 version's performance in Lion. I've gone back to Mail and began using BusyCal

How to work with crystal reports and boe3.1

Hello!!! Forums,
Please suggest me some tutorials and sample code to work with crystal reports that can be viewed in boe3.1. What software to use to deveelop reports? How to view it in boe3.1?
Regards,
grace

At the top of the forums you will see posts that say read this first, read those first.
[BOE Enterprise|Read Before Posting - Where to find Business Objects .NET SDK Resources;
[Crystal Reports .NET|Read Before Posting - Where to find Crystal Reports .NET SDK resources;
Jason

Can JDeveloper work with Crystal Report?

I try to open Crystal Report with Jdeveloper, but I could not. Do anyone know if JDeveloper worked with Crystal Report. If anyone knows how, please show me. Thank you in advance.

For example, I have a report name "report1.rpt" which was saved under "C:\oracle\Jdev9052\jdev\mywork\HR\HR\public_html". Beside that I also have all the required jar files and folder crystalreportviewer added to my project. But everytime I run it, I received "The page cannot be displayed". Please help me to point out the problem. Thanks.
<%@ page import= "com.crystaldecisions.report.web.viewer.*,
com.crystaldecisions.sdk.occa.report.data.*" %>
<%@ page import="com.crystaldecisions.reports.reportengineinterface.JPEReportSourceFactory,
com.crystaldecisions.sdk.occa.report.reportsource.IReportSourceFactory2,
com.crystaldecisions.sdk.occa.report.reportsource.IReportSource" %>
<%
// This is the database logon section of this report
IReportSourceFactory2 rptSrcFactory = new JPEReportSourceFactory();
String report = "report1.rpt";
IReportSource reportSource = (IReportSource) rptSrcFactory.createReportSource(report, request.getLocale());
CrystalReportViewer viewer = new CrystalReportViewer();
viewer.setName("Test Report");
viewer.setReportSource(reportSource);
// now provide the viewer with the connection information
response.getOutputStream().flush();
viewer.processHttpRequest(request, response, getServletConfig().getServletContext(), out);
viewer.dispose();
%>
-- A part of the config.xml file
<?xml version="1.0" encoding="utf-8"?><CrystalReportEngine-configuration>

<timeout>10</timeout>
<ExternalFunctionLibraryClassNames>
<classname></classname>
<classname></classname>
</ExternalFunctionLibraryClassNames>

Windows Server 2008 x64 and Crystal Reports Server Embedded

We're attempting to certify our software with Windows Server 2008 x64 and want to know the best way to configure both the server and client of Crystal Reports Server Embedded. Currently, our software is certified against Windows Server 2003 x86, and we install Crystal Reports Server Embedded XI Release 2 (no SP) on the application server, and we deploy the Crystal Reports .NET merge modules for XI Release 2 (no SP) on any client machines.
I believe I am correct in stating that no version of Crystal Reports Server Embedded officially supports Windows Server 2008 x64 (based on some other forum postings) until SP1 comes out (which I don't think has happened at this point). If that is true, we can live with installing the RAS on a separate Windows Server 2003 x64, if that's even possible. With that said, can we even get our Windows Server 2008 x64 running with the latest Crystal Reports 2008 .NET merge modules? We've tried many different configurations between CR XI R2 SPs and CR 2008 for both client and server and have very little luck (either it won't install correctly because of x64 or missing .cabs, etc.) on both the client and server side of things.
Can someone suggest the optimal configuration when Windows Server 2008 x64 is in the mix, noting that we can use a secondary Windows Server 2003 (x64 preferred but can fallback to x86)? Or do we have to wait for Crystal Reports Server Embedded 2008 SP1 to be released, and if so, does anyone know of the date?
Thanks,
Ross Beehler

CRSE 2008 is a 32 bit app, it works on 64 bit OS's but all parts must also be running in 32 bit mode.

Creating Crystal Reports with Crystal Report Server XI

Hello,
I am new to Crystal Reports, i installed Crystal Reports Server XI R2 on Windows 2003 server with SP2 and was able to launch Inforview application and also Central Management Console Log On.
I can also see some sample reports which are installed during installation.
Now my next task is to create Crystal Reports using Crystal Report Server XI R2. How can we create a crystal report now by only using Crystal Report Server XI R2?
Do we have to install some other application to create Crystal Reports? I donot see any link on my server which i can use to create crystal reports. The only links which i can see are :
Business Objects-->
     Crystal Report Server-->
                        .Net Administration LaunchPad
                        .Net Infoview
                        Business View Manager
                        Central Configuration Manager
                        Data Source Migration Wizard
                        Data Source Migration Wizard Help
                        Import Wizard
                       Online Developer Library
                        Publishing Wizard
                        Registration Wizard
                       Release Notes
                       Repository Migration Wizard
Please help
Thanks
Vipin

Two ways to create reports:
1) You install the Crystal reports Designer (CRW32.exe).
With your Crystal Report Server, you should also have received a second CD that would have the CR designer.
2) You use the RAS SDK and create reports on the fly using the RAS report creation APIs - .NET or Java. Since you are in the .NET developer forum, I assume you might be interested in the .NET RAS SDK. Here is a list of resources i would recommend:
Links to samples are [here|https://www.sdn.sap.com/irj/scn/wiki?path=/display/bobj/netBusinessObjectsEnterpriseSDKSamples]
[How to use the RAS SDK .NET with In-process RAS Server|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10b840c0-623f-2b10-03b5-9d1913866b32]
[Programing RAS|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b050afe0-2fa5-2b10-658d-98f214ba6a4a]
[Choose the Right SDK for the Right Task|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f006a5e6-7e64-2b10-8a84-8b15ca5cacfc]
For more help, search these forums (there are some great posts in here), the [notes database|https://www.sdn.sap.com/irj/scn/advancedsearch?cat=sdn_ossnotes&query=&adv=true]
[articles|https://www.sdn.sap.com/irj/sdn/businessobjects-articles] and [downloads|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/bobj_download/main.htm]
Ludek

Issue with Crystal Report Server

Hi,
I have a .Net application that uses Crystal Reports Server. The application runs from two servers through load balancing and one of them hosts RAS(Report Application Server) component as well. The issue I am facing is that the server that does not host RAS gives a timeout error periodically when reports are run, inspite of RAS running fine in the other server.
Can anyone let me know if this problem has been identified before?
Regards,
Ashwin

Hi Ashwin,
What is the error message you are getting?
After how many minutes does the timeout error occur?
What is deployed on each of these 2 servers?
Can you please provide some more details on the workflow that causes the timeout?
Thanks
Jonathan

Console login trouble with Crystal Reports Server XI

I installed Crystal Reports Server XI on a new box (replacing old), then applied SP1, and then SP2 bringing it up to the same level as the old box - Version Name: BOXIWIN_SP2 Build Number: 11.0.101.8004.
However, when I restarted the server and logged into Windows, I received the error "CRSXI_MLB_Autorun.exe encountered a problem and needed to close." Although, all the services are running in Central Configuration Manager, I am unable to login to the Central Management Console with the default "Administrator" account (the screen just blanks the User Name: Administrator" field when I click "Log On".
The new server is running Win2003 R2 Enterprise Edition SP2. Old server is running Win2003 Standard Edition SP2. I am using the same install media as was used on the old server, though installation on the old server was done before W2K3 SP2 was installed. Could it be W2K3 SP2, or perhaps the use or R2 or Enterprise Edition? Any thoughts on how to fix this so I can login to CMC?
Regards,
Joe

XIR1 used to have issues with Microsoft DEP, I don't recall exactly but you can set DEP to windows services only from my computer > properties > data execution prevention.
Also when logging in try changing the URL to (local host on the server, the IP address, or the FQDN) see if that helps. When there is no error the problem is likely not the CMS but could be in the web/app.
I don't think anything that was installed should be starting a file called "CRSXI_MLB_Autorun.exe" Could that have gotten added to the windows run registry key or startup group by accident?
Also if you login to a client tool like crystal reports, business views with administrator what error do you receive?
Regards,
Tim

Zoom functionality with Crystal reports server

Hello,
in crystal report there's a great functionality to zoom in a diagram. Is this functionality also available when I start the report within InfoView (Crystal Reports Server 2008) ?
regards,
Silvia

in Crystal Reports Designer you can 'zoom in' a diagram, when you right click the mouse and choose this option, but I can't see this option, when I start the report within InfoView.
There's a big difference between choosing this option and zooming the entire report !!
Regards,
Silvia

Problems with Crystal reports server 2008 VI (Invalid logon information)

I have added a report that connects to the SQL server and also I set up the required ODBC for the report on the server. I could run the report without any issues.
When I add the same report to another folder in CMC or add a new report that uses the same connection, and try to run it, I get the following error.
I did set location and verify database in Crystal designer many times and added the report into CMC, but still it gives me the error.
However the first report that I added still works fine. For some reports it shows the parameter screen and when I enter them and click OK it gives the same error. I checked the logon information and they are correct. Reports work fine in Crystal designer. When I added the report, in the database configuration I selected "Use original database logon information from the report." and entered the SQL user id and password.
error message:
"The database logon information for this report is either incomplete or incorrect"
I then went back to the database configuration and selected "Use custom database logon information specified here." and entered the ODBC connection info.
With this when I run the report it takes a little longer and again asks me to enter the user id and password, even though I selected "Use same database logon as when report is run" option. Still when I enter the user id and password and click ok it keeps on prompting the same. I kept on entering it for 20 times, still it kept on prompting for the same. I am not sure how to make this work.
The report that I am trying to run has an SQL command (that links with 10+ tables), views and some tables. It also got one dynamic parameter prompt.
Also when I select the item from dropdown box "Table Prefix" and save and come back to the database configuration the option I selected is blank. It seems like CMC is not saving this. I found out that this sometimes happens with the password too.
I have checked on SAP forum and could not find a solution for either of these problems yet.
I do have created a web site with CR developer 2008 that runs the same report and it works there without any issues.
Could any one help me with this?

I assume that you have built your reports with the CR Designer 2008 V1. Try to open the affected report in the CR Designer and select Database->VErify database and save it back into the repository. Does it work?
Regards,
Stratos

How can I get Visual Studio 2010 to work with Crystal Reports?

Hi,
My office upgraded to Windows 7 and Visual Studio 2010 and now I can no longer write front end programs to Crystal Reports version 10. Does anybody know if there is a a workaround? Also, our version of Crystal Reports is 32 bit but the new desktop machine I have is 64 bit so there may be issues accessing the Crystal Reports DLLs which are now located in the Programs (x86) folder.
It's all such a gigantic mess that I don't even know where to begin. Visual Studio 2008 had Crystal Reports in it so it was real easy.
Dave

Try searching first before posting. CR for Visual Studio 2010 download is available on the OverView tab. It's a free install, we don't ship in VS now, it's still a plug in so you can't use VS 2010 Express version, MS doesn't support plugins in Express versions.
Runtime files will be version 13 and should update your app without issues.
Install VS 2010/2012/2013 first and then run the first link in the download page. Don't instlal just the runtime redist MSI, it will not integrate into VS.
Also, set your Project for x86 and not any CPU and use the full .NET Framework and not the client version.
Don

Has any body work with Crystal Report XI and JDeveloper 10.1.3 ?

Hi All,
We want to use Crystal Report XI as our reporting tools and integrate it with our jsp/jspx application developed with JDeveloper 10.1.3.
Has any body succesfully done this kind of integration ?
Could you please share it with me ?
Thank you for your info,
xtanto

Hi friends,
I use Crystal Reoprt XI (release 1) with JDev 10.1.3, never try Crystal 10 with JDev.
Here is what I do :
1. Install CR XI on the same machine with JDev 10.1.3.
2. Modify CRConfig.XML on folder : C:\Program Files\Common Files\Business Objects\3.0\java on three places :
<JavaDir>D:\JDev1013\jdk\bin</JavaDir>
<Classpath>D:\JDev1013\jdbc\lib\ocrs12.jar;D:\JDev1013\jdbc\lib\ojdbc14.jar;D:\JDev1013\jdbc\lib\ojdbc14dms.jar;D:\JDev1013\jdbc\lib\orai18n.jar; .... [original classpath]
<JDBCURL>jdbc:oracle:thin:@oracle.sas.co.id:1521:ORCL</JDBCURL>
<JDBCClassName>oracle.jdbc.driver.OracleDriver</JDBCClassName>
<JDBCUserName>myuserid</JDBCUserName>     <JNDIURL></JNDIURL>
3. Create the report using Crystal XI, USE JDBC CONNECTION, and it takes about 12-20 minutes to connect, don'y know why :)
( now the integration part )
4. Create a project for the report in our apps workspace (e.d : ViewController)
5. Copy these jar files below to D:\..\ViewController\public_html\WEB-INF\lib
(I got the files from Crystal Installation)
04/03/2006 09:27 AM 666,774 CrystalCharting.jar
03/26/2006 12:23 AM 2,163 CrystalCommon.jar
04/03/2006 09:27 AM 94,137 CrystalContentModels.jar
04/03/2006 09:30 AM 519,003 CrystalExporters.jar
04/03/2006 09:27 AM 60,468 CrystalExportingBase.jar
04/03/2006 09:26 AM 561,021 CrystalFormulas.jar
04/03/2006 09:26 AM 390,049 CrystalQueryEngine.jar
04/03/2006 09:28 AM 1,934,849 CrystalReportEngine.jar
04/03/2006 09:25 AM 413,455 CrystalReportingCommon.jar
09/08/2003 02:42 PM 3,915,966 icu4j.jar
04/03/2006 09:29 AM 135,232 jrcerom.jar
02/10/2006 10:39 AM 698,542 jsf-impl.jar
03/26/2006 12:23 AM 8,680 keycodeDecoder.jar
05/11/2004 07:22 PM 352,668 log4j.jar
03/26/2006 08:33 AM 474,429 MetafileRenderer.jar
04/03/2006 08:47 AM 369,503 rasapp.jar
04/03/2006 08:46 AM 784,065 rascore.jar
03/16/2006 09:35 AM 699,443 ReportViewer.jar
04/03/2006 09:25 AM 95,381 rpoifs.jar
04/03/2006 08:46 AM 21,128 serialization.jar
06/17/2006 01:41 PM 393,259 standard.jar
10/02/2003 06:29 PM 3,777 URIUtil.jar
02/28/2006 10:01 AM 48,279 webreporting-jsf.jar
03/07/2006 08:50 AM 778,348 webreporting.jar
02/20/2004 02:01 PM 1,010,806 xercesImpl.jar
02/20/2004 02:01 PM 124,724 xml-apis.jar
6. Right click the project, project properties, Libraries, Add Jar / Directories,
Add all the jar files from previous step.
7. Copy CRConfig.XML to folder D:\..\ViewController (project folder)
( this CRConfig.XML is the one that I have not modified, the original one. )
Please check, you must have this on the file :
<reportlocation>.</reportlocation>
8. Then create a Folder e.g : reports under WEB-INF :
D:\..\ViewController\public_html\WEB-INF\reports, then copy all reports created on step 3 on to this folder.
9. create a jsp to call the report, here is sample of my JSP :
<%@ page
contentType="text/html;charset=windows-1252"
isELIgnored="true" %>
<%@page import="com.crystaldecisions.reports.sdk.*"%>
<%@page import="com.crystaldecisions.sdk.occa.report.lib.*"%>
<%@page import="com.crystaldecisions.sdk.occa.report.exportoptions.*"%>
<%@page import="com.crystaldecisions.report.web.viewer.*"%>
<%@page import="com.crystaldecisions.sdk.occa.report.reportsource.*" %>
<%@page import="com.crystaldecisions.sdk.occa.report.data.*" %>
<%@page import = "java.util.*" %>
<%@page import = "view.util.JSFUtils" %>
<%@page import = "oracle.jbo.domain.Number" %>
<%
//Use the relative path to the report; the physical or full qualified URL cannot be used.
//String reportName = "D:/DemoCrystal/Project/public_html/WEB-INF/Report/OrderID2.rpt";
//String reportName = "D:/DemoCrystal/Project/public_html/WEB-INF/Report/test2.rpt";
//String reportName = "D:/DemoCrystal/Project/public_html/WEB-INF/Report/invoice.rpt";
String reportName = "../reports/invoice.rpt";
String userName = "myuserid";
String password = "mypassword";
String compId = (String)JSFUtils.getFromSession("compId");
String docId = (String)JSFUtils.getFromSession("docId");
Number noDokumen = (Number)JSFUtils.getFromSession("noDokumen");
String status = (String)JSFUtils.getFromSession("status");
System.out.println("from rptInvoice.jsp " compIddocId + " " + noDokumen.toString()+status);
try
//Open report.
ReportClientDocument reportClientDoc = new ReportClientDocument();
reportClientDoc.open(reportName, 0);
     session.setAttribute("reportSource", reportClientDoc.getReportSource());
// Conn info
ConnectionInfos oConnectionInfos = new ConnectionInfos();
ConnectionInfo oConnectionInfo = new ConnectionInfo();
oConnectionInfo.setUserName(userName); //Set username and password for the report's database
oConnectionInfo.setPassword(password);
oConnectionInfos.add(oConnectionInfo); //Add object to collection
//Create a Fields collection object to store the parameter fields in.
Fields oFields = new Fields();
// THE PARAMETERs.
//Integer numberValue = new Integer(2166);
//String stringValue = "IV";
//Set all of the parameter values using the utility function.
setDiscreteParameterValue(oFields, "Nomor_Invoice", "", new Integer(noDokumen.intValue()));
setDiscreteParameterValue(oFields, "Kode_Invoice", "", docId);
setDiscreteParameterValue(oFields, "Compid", "", compId);
setDiscreteParameterValue(oFields, "Status", "", status);
//System.out.println("from view-controller report jsp v2.2");
//Set the export options to export to the format of choice.
ExportOptions oExportOptions = new ExportOptions();
oExportOptions.setExportFormatType(ReportExportFormat.PDF);
ReportExportControl oReportExportControl = new ReportExportControl();
oReportExportControl.setExportOptions(oExportOptions);
oReportExportControl.setExportAsAttachment(false);
Object reportSource = session.getAttribute("reportSource");
oReportExportControl.setReportSource(reportSource);
oReportExportControl.setDatabaseLogonInfos(oConnectionInfos);
     oReportExportControl.setParameterFields(oFields);
//Export the report
oReportExportControl.processHttpRequest(
request, response, getServletConfig().getServletContext(), null);
catch(ReportSDKException e)
out.print(e);
%>
<%!
* Utility function to set values for the discrete parameters in the report. The report parameter value is set
* and added to the Fields collection, which can then be passed to the viewer so that the user is not prompted
* for parameter values.
private void setDiscreteParameterValue(Fields oFields, String paramName, String reportName, Object value) {
//Create a ParameterField object for each field that you wish to set.
ParameterField oParameterField = new ParameterField();
//You must set the report name.
//Set the report name to an empty string if your report does not contain a
//subreport; otherwise, the report name will be the name of the subreport
oParameterField.setReportName(reportName);
//Create a Values object and a ParameterFieldDiscreteValue object for each
//object for each parameter field you wish to set.
//If a ranged value is being set, a ParameterFieldRangeValue object should
//be used instead of the discrete value object.
Values oValues = new Values();
ParameterFieldDiscreteValue oParameterFieldDiscreteValue = new ParameterFieldDiscreteValue();
//Set the name of the parameter. This must match the name of the parameter as defined in the
//report.
oParameterField.setName(paramName);
oParameterFieldDiscreteValue.setValue(value);
//Add the parameter field values to the Values collection object.
oValues.add(oParameterFieldDiscreteValue);
//Set the current Values collection for each parameter field.
oParameterField.setCurrentValues(oValues);
//Add parameter field to the Fields collection. This object is then passed to the
//viewer as the collection of parameter fields values set.
oFields.add(oParameterField);
%>
10. have a try and HTH :)
xtanto.

Does office 2008 work with mountain lion

does office 2008 for mac work properly with new mountain lion os

I am having the same problem.
- iMac
27-inch, Mid 2011
Processor 2.7 GHz Intel Core i5
Memory 16 GB 1067 MHz DDR3
Graphics AMD Radeon HD 6770M 512 MB
Software OS X 10.8.1 (12B19)
Although I have office 2011. I have a second monitor set up. That might be erroring it.

Does CR 2008 work with Crystal Reports Server 11.5

Similar Messages

Maybe you are looking for