Does CS2 install on windows 7 or windows 8?

is there a problem if CS2 is installed in a computer with windows 7 or 8? will the programs work on the newer operating systems? If so are there any operation errors in adobe?

None of the CS2 products were ever designed for or tested with Windows 7 or Windows 8 and will likely have problems during installation or if installation actually works, execution. As software that is a full seven versions older than the current Adobe software, it is not supported at all by Adobe.
- Dov

Similar Messages

Adobe Application Manager CS5 downloads but does not install Spanish update on Windows 8.1 64 bit Spanish

I have a multi license for Adobe Creative Suite Design Premium CS5 in Spanish. I installed it correctly in Windows 8.1 Spanish 64 bit. Photoshop 32 and 64 bit start, same with Illustrator with some fix. Yet when I look for updates, 10 are found by Adobe Application Manager, but for a few days I get a message (in Spanish) that "there was an error while downloading, try again later". I do it for some days already without success. I have the same Spanish suite installed on Windows 7 64 bit (English) for some good time (2 years probably), and there the now no updates.
The PDapp.exe file is from the year 2010. Is it not too old as for Adobe?
Kind regards
Marcin Balcerzyk, Spain

Please try this:
http://blogs.msdn.com/b/usbcoreblog/archive/2013/11/01/help-after-installing-windows-8-1-my-usb-driv...
Thanks!
Houman

NVIDIA driver 6md647ww does not install on W701 with Windows 7 64 Bit

Hello,
I have downloaded the nvidia driver 6md647ww (311.00), 64 bit version, and can't install on a Windows 7 64-bit system. It says "no compatible device found". The strange thing is, although the decompression routine and the window asking to start installation both say that they are the 64 bit version, the text besides the check mark "install the driver now" says it will install the 32 bit version (after decompressing the window says 64 bit in the upper part, but 32 bit in the lower part).
So I guess there is an error in the installation routine which erronously wants to install the 32 bit version although it is DEFINITELY the 64 bit version I have downloaded. Also, I downloaded for testing the 32 bit version of the driver (5md647ww), and if I try to install that, I get exactly the same error as with the 64 bit version.
Could someone please look into the 6md647ww, there is something wrong with it. Also, I can install 6md640ww and 6md643ww without any problems and switch between these two versions without any error - the 6md647ww issue is definitely NOT a problem of my OS configuration.
I have a sporadic heavy crash issue with 6md643ww and need to upgrade badly.
Please help. Best regards, Michael
System: Lenovo W701, 16 GB Ram, Windows 7 64 Bit, NVIDIA Quadro FX 3800M

In the meanwhile Rev 04 of the driver was published. This version is binary different to Rev 03 and - surprise - it now says correctly after unpacking it will install the 64-bit version. But after that same problem as before, "no compatible device found".
I did some searching into the files of 6md647ww. I guess the file Display.Driver\NVLT.inf contains a list of compatible devices - in this file the sections labelled NVIDIA_SetA_Devices.NTamd64.* list a lot of device-ids, for example PCI\VEN_10DE&DEV_0A3C&SUBSYS_214517AA and many more. The device id of the graphics card for a system can be found in the hardware/device manager of windows, I obtained that for my card and this id doesn't show anywhere in NVLT.inf. So if my guess is correct, it is no wonder the installer says "no compatible device" since the device id of my card is not listed in NVLT.inf.
Please note again that all previous versions of lenovo drivers for my NVIDIA Quadro FX 3800M did and do install without absolutely any problem!
This is strange, readme of the current driver version definitely says NVIDIA Quadro FX 3800M is supported by this driver, but the driver doesn't seem to contain the device id for it. Looks almost like the wrong driver was used / bundled into 6md647ww.
And again the question to the board / administrators if lenovo technical support is reading here and is there another contact at lenovo where I could direct my problem to? I am still having the sporadic heavy crash issue which is very dangerous since it can happen any time if displaying whatever graphics in whatever software and which therefore has a high risk of data loss. Also, installing the plain NVIDIA driver directly in the current version still has the problem of flickering and color errors, so this isn't a solution either.
Best regards, Michael

Bluetooth Driver does not install or work on Windows Server 2008 R2

Bluetooth is the only hardware device on my T500 which is not working in Windows Server 2008 R2. Even leveraging the Bluetooth stack copied over from Win7 it is not possible to use the Broadcom BT on the PC.

Very good. According to the version number, you are on the original release of CR XI R2. This release did not support WIN 2008 Server. You will have to update the development computer to SP 6. SP 6 is here:
https://smpdl.sap-ag.de/~sapidp/012002523100015859952009E/crxir2win_sp6.exe
Recompile the app. Uninstall the runtime from the client box. Create a new deployment project using the SP 6 runtime.
MSI:
https://smpdl.sap-ag.de/~sapidp/012002523100000633302010E/crxir2sp6_net_si.zip
MSM:
https://smpdl.sap-ag.de/~sapidp/012002523100000634042010E/crxir2sp6_net_mm.zip
Install the above runtime on the client computer. Run.
Oh, and keep your fingers crossed...
- Ludek

9iFS simply does not install and run on WIndows 2000

hello,
story so far ( sigh. )
1) install failed but ran ifssetup.bat to complete as per a previous thread suggestion
2) added log-on-as-batch privilege to administrator ( with which everything is installed and run )
3) from the EMWeb start node and launch domain work correctly, but start domain fails.
4) running ifslaunchdc.bat and ifslaunchnode.bat works fine, but ifsstartdomain.bat worked correctly before i rebooted the machine after installing the software, and from then on gives me the following error :
exception IFS-45002 unable to start domain controller,
exception IFS-21008 unable to connect to IFS service
exception IFS-32005 failed to get prepared statement etc
I have seen any number of people here post about this problem, but has any one got a solution !!!???
A number of people mention ensuring the domain controller is started with the correct account details. As i have installed everything as administrator and everything is run with administrator account, I fail to see how this can help. Any help very much appreciated.
I am finding it VERY difficult to understand why it is so problematic to install this software - even the installer fails to complete on a clean machine meeting all the oracle specified criteria.
Regards
Tom

Hi, I'm assuming you are using the Manual Install. Did you already Uninstall any current Flash Player version?
If not, download and SAVE to your Desktop the Uninstaller:
http://kb2.adobe.com/cps/141/tn_14157.html
Then download and SAVE to your Desktop the Installer:
http://www.adobe.com/products/flashplayer/fp_distribution3.html
Use the EXE Installer for Windows and Internet Explorer. Use the EXE Installer for the plugin based browsers
Then use the Administrator Account and CLOSE all browser Windows. Disable any instant messenger service from the system tray.
Run the Uninstaller and reboot(restart) your computer.
Then Run the Installer and reboot.
That message appears because the IE browser window is open.
Thanks,
eidnolb

I have problem with installing Java Runtime Enviroment. It does not install it properly in Windows 7

I'm asking for installing Java Runtime Enviroment. I install, but it does not work. I'm asked to install it evry time I am using Panasonic web camera with microfone and speaker program?

I'm going to answer my own question in hopes it helps someone else. I had the problem immediately after I had installed PS CC. Once I restarted the computer and tried again, it worked.

CS2 Install with Windows 7

I'm trying to install CS2 on a new laptop running Windows 7. The "Installation Location" window tells me it is installing into C:\Program Files (X86)\Adobe but it says that the space available is 0 MB. I lowered the UAC slider to the bottom of the scale and restarted the computer but this made no difference. I also disabled the virus protection but again it made no difference. Does anyone have any solution so that I can install CS2 on the laptop?
Charlie

It works fine.
Right click on the "setup.exe" file on the CS2 install disc and then click on "properties", then click on the "compatibility" tab.
Click on the box for "Run this in compability mode" and in the pull down select "XP sp2".
Click "apply" and then "ok".
Now go back to "setup.exe" and click on "Run as administrator" and CS2 should load fine.

Just got iPhone 5, get home and find iCloud Outlook Add-in does not install under Windows XP. I am loathe to upgrade to Windows Vista/7/8 just yet. Can I obtain and use an earlier version of iCloud Outlook Add-in? My iPad II synchronizes!

Just got iPhone 5, get home and find iCloud Outlook Add-in does not install under Windows XP. I am loathe to upgrade to Windows Vista/7/8 just yet. Can I obtain and use an earlier version of iCloud Outlook Add-in? My iPad II synchronizes!

There is no 'earlier' version that supports XP. iCloud launched with Vista/7 support only.

Tried installing Icloud calendar on windows 8.1 and get the message "Calendar has stopped responding". does anyone have any suggestions?

tried installing Icloud calendar on windows 8.1 and get the message "Calendar has stopped responding". does anyone have any suggestions?

Hey there Alex,
Welcome to Apple Support Communities.
It sounds like you’re running into an issue installing iCloud Control Panel on your PC, you’re seeing an alert message related to an iCloud server not responding. Take a look at the article linked below and try running through the troubleshooting steps it provides.
iCloud: iCloud Control Panel setup cannot be started - Apple Support
So long,
-Jason

Installing DSEE 7 on Windows 2008 R2 SP1 64-bit does nothing

Hi All,
Has anyone been able to install DSEE 7 on Windows 2008 R2 SP1 64-bit? Is it supported?
I followed the instructions and when run the command (as the Administrator) below nothing happen, it simply return an empty command prompt. Ms VC 2008 Redistributables (the one that come with the archive) is installed.
dsccsetup.exe war-file-create
dsccsetp.exe ads-create
When run the same command using the same archive on Windows 7 64-bit it does prompt for further input or report error.
Any suggestions or help would be much appreciated.
Shane L

Windows 2008 R2 is not listed as a supported OS in the release notes.
http://docs.oracle.com/cd/E19424-01/820-4805/820-4805.pdf
It lists:
Microsoft Windows Server 2008 Standard Edition for x86 and x64 Service Pack 1
Microsoft Windows Server 2008 Enterprise Edition for x86 and x64 Service Pack 1
If you are able to go to the next version, it is listed as supported in the release notes for ODSEE 11g:
http://www.oracle.com/technetwork/middleware/downloads/odsee-11gr1certmatrix-161592.xls
I have not tried 11g on 2008 R2 myself, but if it is in the certification matrix, it should work.
Hope that helps,
Eric

Does 11.1.1.6 OBIEE simple install work properly on Windows 7 64 bit OS?

Can anyone confirm if the simple install for 11.1.1.6 simple install works normally on Windows 7 64 bit OS? I have run into a slew of issues including:
1. hanging on the Create Domain. Stays at 0% for 2 hours and then fails
2. Pre requisite checks do not work in a stable way (sometimes they fail and need to be ignored and other times they succeed)
I removed all Oracle software and tried a completely clean install (DB, RCU, OBIEE, etc)..I have my loopback adapter set and also have JDK.
Do we need to manually do the WLS + Software only to get this to work or does the Simple install actually work on Win 7 64 bit??
Thanks.

According to the certification matrix, it should work: http://www.oracle.com/technetwork/middleware/bi-enterprise-edition/bi-11gr1certmatrix-166168.html
Check row 72/73 in Current System Certification. Also, what do the logs say about the errors you are facing?

The current iTunes 10.5 upgrade does not install on Windows 7 and indicates a faulty install package (error 2324). Advice or details on the release date for a proper fix?

The current iTunes 10.5 upgrade does not install on Windows 7 and indicates a faulty install package (error 2324). Advice or details on the release date for a proper fix? I'm not able to roll back to the prior version, so I'm stuck in limbo.

There have been a number of problems with installing the latest iTunes on Windows 7 64-bit machines during the last couple of weeks. You might want to do a search on that topic and see if anyone has a solution. There have been various versions of the problem but a lot related to errors in the download package or failure to download.

Acrobat Pro 7.0 does not install on Windows 7, how can I get a version that does?

I recently downloaded and tried installing the non-activation version of Adobe Acrobat Pro 7.0 on my Windows 7 PC. After researching the installation error I read some posts that Acrobat 7.0 does not install on Windows 7. What are my options?

AA 7 will install, but it will not run very cleanly. A lot of things require workarounds. However, it is strongly recommended that you upgrade to AA XI for use on Win7 or Win8. AA 7 is not fully compatible and playing with workarounds is not a great use model. Looks like the price just came down also. You will have to purchase the full version. The upgrade version requires at least AA 9.

My Windows 7 Ultimate {32bit} does not install driver for my LG HDD HXD5 320GB

My windows 7 does not install driver for my LG EXTERNAL HDD HXD5 320GB & its attached using a USB.
It works perfectly on Other computers having Windows 7 & Windows XP & Windows Vista, just doesn't work on mines.
I have had internet connected when it was installing hence it got the opportunity to search Windows Update for it but it fails :(
It works even on my computer ( I have DUAL OS) on windows XP SP3 but i need it to work in Windows 7.
Please help Thanks :)
& i have already tried tried the solution which was proposed for another topic in this forum on which it was to Uninstall the driver using Device Manager and unplug the HDD and attach again and let the computer detect and install it again, my computer
does detect it but fails to install the drivers.
My Computer has a 2GB of RAM & 2.40GHZ (32bit) with an Intel Core 2 Duo Processor and had come with Windows Vista Home Premium 32bit installed, & i upgraded to Windows 7 Ultimate 32 Bit which is completely updated to all the Updates that Microsoft
had offered (using the built in Windows Update in Control Panel)
I have got screen shots of it too.
http://shumayal.fileave.com/HDD.zip
PS: Same is the case with some of my USB Flash drives, but in their case they don't get detected at all but get in Windows XP SP3 (which is another OS on my pc) as well as on windows 7 and other OS on OTHER COMPUTERS but not mines in Windows 7.
Thanks :)

Hi,
I recommend you try to update the BIOS and the motherboard chipset drivers for Windows 7 firstly.
After that, please refresh the USB Stack:
Control Panel – Device Manager – USB Serial Controllers – Right Click on EVERYTHING and UNINSTALL all except the category itself – Reboot
. This refreshes the drive and the USB stack
Then, right click on the LG EXTERNAL HDD HXD 5 320GB in Device Manager and select Update Driver Software.
You may also try the Windows 7 built-in
Hardware and Devices troubleshooter.
Hope it can help you!
Best Regards,
Miya Yao
This posting is provided "AS IS" with no warranties, and confers no rights. | Please remember to click "Mark as Answer" on the post that helps you, and to click "Unmark as Answer" if a marked post does not actually answer your question. This can be beneficial
to other community members reading the thread.

My iTunes installation via Windows 7 does not install the Apple Mobile Device Support file

I have followed several suggestions to resolve the problem caused because of my update of iTunes does not install the Apple Mobile Device Support folder, thus making it impossible for me to sync my iPhone 4S to my desktop version of iTunes. I have tried to install the AppleMobileDeviceSupport.msi file and it almost completes the installation before "rolling back" the entire process and giving me a message that there was a problem with the installation. Has anyone been able to solve this problem. I use Windows 7. I have seem some :"solutions" that seem to work for some people, but not for me, and evidently not for many others? Finally, would it matter if I installed Safari on my desktop and tried to install iTunes using Safari?

Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If so, can you get a normal iTunes install to go through properly now?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

Does CS2 install on windows 7 or windows 8?

Similar Messages

Maybe you are looking for