Does CUCM System version: 7.1.5.33900-10 support texting on 7925g's without middleware?
I have been tasked with testing text messaging on the 7925g model phones and have been unsuccessful. This is a hospital environment, and will also need to able to handle nurse call notifications. Eventually
You will need to integrate to some 3rd party application as this is not natively supported by Cisco, there are many different ones out there.
Chris
Similar Messages
-
How do you install/upload a device pack on CUCM System Version: 9.1.1.20000-5
We received our new DX80. On the CUCM 9.1.2 phone list the DX80 is not listed. I believe we need to install the device pack or does the CUCM still needs to be upgraded.
cmterm-devicepack9.1.2.13057-1.cop.sgn.
How do i install the device pack.
Thanks
WilfredCheck this readme as an example.
http://www.cisco.com/web/software/282074299/102824/cmterm-devicepack-9_1_1_21017-2_Readme.pdf -
Does NI-DAQ version 4.8x or 4.9x support the NI PCI-6503 card?
NI-DAQ 6.6 does not support Superlab, an application we use. Superlab says to use NI-DAQ 4.8 or 4.9. Does NI-DAQ 4.8 or 4.9 support the PCI-6503 card?
No, you will need NI-DAQ version 5.0.5 or greater to use with the PCI-6503 board. (Version 6.9.1 is suggested however.) I would contact the providers of Superlab to see if they have an upgrade.
If you are looking to do data acquisition programming, I would suggest looking into LabVIEW.
Brian -
Tried upgrading to 10.8.2. It failed the upgrade. Currently the Software version shows " System Version:
OS X 10.8.1 (12B19)" . But App store does not show 10.8.2 as an updateYou can Contact MAS here.
-
Hi, I've got an imac using mac os x version10.4.11, does anyone know of any printers that are compatible with this operating system version?
Yesterday I set up a Canon IP3600 to work on a PowerBook G4 running OS 10.4.11. It is a print-only unit. I got the 10.4 drivers off the Canon website before connecting the printer. Many Brother printers still have support for older Mac OS versions.
If you need a multi-function device, it is gettng very hard to find any that support PowerPC Macs (pre-2006) of OSX versions older then 10.6 any more.
As you posted in the PowerPC iMac forum I assume you have one. However, there are some Intel Macs (2006 and newer) still running 10.4. Check "About this Mac" under your Apple menu: if it says you have an Intel processor, you have many more doors open. -
CUPC 8.6.3.20802 crashing on login on System version 8.6.2.100000-44
Hi there,
At my company i have a Dell Latitude E6330 laptop running version 8.6.3.20802 of the CUPC.
The program appears to crash and auto shut down right after I appear to successfully log into it.
We are running System version 8.6.2.100000-44.
It does not seem to happen to other users on the same laptop model as me, we have tried to reinstall and re-image my machine as well as even clear out my Windows Roaming profile to start fresh it still crashes. It appears that when I try to log on to another Dell Desktop it will work but when I go back to my laptop it does the same thing.
I have found a few different logs however I do not want to spam my thread with every single log that the Communicator gives me. I have tried to turn on Detailed Logging however the application crashes before it is able to be turned on.
If you guys could please let me know where I could find some log information which I could post up and give me some assistance in troubleshooting the issue that would be great.
Thanks heaps in advance!Hello,
Was this ever resolved? i am facing the same issue -
CUPC 8.6.3.20802 crashes after logging in successfully System version 8.6.2.100000-44.
Hi there,
At my company i have a Dell Latitude E6330 laptop running version 8.6.3.20802 of the CUPC.
The program appears to crash and auto shut down right after I appear to successfully log into it.
We are running System version 8.6.2.100000-44.
It does not seem to happen to other users on the same laptop model as me, we have tried to reinstall and re-image my machine as well as even clear out my Windows Roaming profile to start fresh it still crashes. It appears that when I try to log on to another Dell Desktop it will work but when I go back to my laptop it does the same thing.
I have found a few different logs however I do not want to spam my thread with every single log that the Communicator gives me. I have tried to turn on Detailed Logging however the application crashes before it is able to be turned on.
If you guys could please let me know where I could find some log information which I could post up and give me some assistance in troubleshooting the issue that would be great.
I am part of the IT department at my firm and we have already tried various troubleshooting steps but any extra assistance would be great!
Thanks heaps in advance!Hello,
Was this ever resolved? i am facing the same issue -
Why does the new version not have back-up disc in the library file? And how do I fix it?
Why does the new version of i-tunes not have back-up to disc in the library file? And how do I fix it?
Fast backup for iTunes library (Windows)
Grab SyncToy 2.1, a free tool from MS. This can be used to copy your entire iTunes library (& other important data folders) onto another hard drive or network share. You can then use SyncToy periodically to synchronise or echo your library to the backup. A preview will show which files need to be updated giving you a chance to spot unexpected changes and during the run only the new or updated files will be copied saving lots of time.
If your media is all organised below the main iTunes folder then you should also be able to open the backup library on any system running the same version of iTunes, regardless of the drive letter or path it appears on.
Step-by-step guide to using SyncToy.
tt2 -
What is the best soft wear update for a mac desktop with System Version: Mac OS X 10.5.8
What is the best soft wear update for a mac desktop with System Version:
Mac OS X 10.5.8It will depend on the actual model you have.
Upgrade Paths to Snow Leopard, Lion, Mountain Lion, or Mavericks
You can upgrade to Mountain Lion or Mavericks from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99 while Mavericks is free. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard — Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
Snow Leopard General Requirements
1. Mac computer with an Intel processor
2. 1GB of memory
3. 5GB of available disk space
4. DVD drive for installation
5. Some features require a compatible Internet service provider;
fees may apply.
6. Some features require Apple’s iCloud services; fees and
terms apply.
Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service — this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
Lion System Requirements
1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
or Xeon processor
2. 2GB of memory
3. OS X v10.6.6 or later (v10.6.8 recommended)
4. 7GB of available space
5. Some features require an Apple ID; terms apply.
Upgrading to Mountain Lion or Mavericks
To upgrade to Mountain Lion or Mavericks you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion or Mavericks (Free) from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
OS X Mountain Lion — System Requirements
OS X Mavericks- System Requirements
Macs that can be upgraded to OS X Mountain Lion
1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
Model Identifier 5,1 or later
3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
7. Xserve (Early 2009) — Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
See App Compatibility Table — RoaringApps. -
Hi what does this mean and what do I need to do?....You are running an operating system that Photoshop no longer supports. Refer to the system requirements for a full list of supported platforms.
well not sure of what the problem is besides you running an operating system that adobe cannot work with. reply with that type info ie I am running windows xp home or OSX version 7.5.3 etc. Meanwhile here is the link for minimum system requirement for adobe's creative cloud products System requirements | Creative Cloud that should help. good day
-
"unsupported system version error" Message
I just loaded Mavericks, upgrading from snow leopard server. Everything uploaded great except I keep getting an error message that keeps popping up saying "unsupported system version error." It tells me that I need some version of Mac OSX 10.6 to 10.8 to run this application. What application is it talking about? Everytime that I click "OK" to close the error box, it popps right back open immediately all over again. Annoying! I can't get rid of it.
My question is what app is doing this? It doesn't tell me. How do I delete it off my system to stop this annoyance? When I mouse over the icon in the dock it says "Quay Menu" I have no idea what this is or what I should do? Any help woud be greatly appreciated.
Thank You,
-kirk
2010 Mac Miniright click the quay menu icon in the dock and open in finder then delete the contents. have not had the message since
-
Hi all,
I have searched through forums, but could not find the solution to my problem:
I have a notebook ASUS with Windows 8 preinstalled.
Yesterday I was doing some housecleaning jobs with some freeware tool (don't remember the name).
Afterwards I have not been able to boot into Windows.
CURRENT SITUATION: When I switch the PC on, after the welcome screen of ASUS and Windows 8 the system goes to a blank screen (no cursor, no mouse, CTRL+ALT+DEL not working).
On next reboot, it does not start automatically the Recovery/Repair procedure and goes through the same steps again. It's not a loop, it just hangs.
Looking into c:\windows\system32\LogFiles\Srt\srttrail.txt I see the following error message at the bottom of the file on the time of my last boot attempt: "Operating system version is incompatible with Startup Repair"
I tried several things without success, so now I want to solve the problems one by one and first thing is to understand what might be causing the "Operating system version is incompatible with Startup Repair" error and how it can be solved.
Thanks for readingHi,
Any update here?
I agreed with the others. First, if we have any backup available to restore Windows 8.1, we may take use of that.
If we don't have any backup available, we'd better contact the manufacturer side for a deeper help.
Or as Janek Fehn suggested, make a clean install of Windows 8, then update to Windows 8.1 again.
Best regards
Michael Shao
TechNet Community Support -
I have MacBook 4.1 laptop with a Version 10.5.8 software. Does this software version support iCloud? Can this MacBook be updated to the latest software version?
Once you are at 10.6.8 Lion is still available from Apple. You will have to call Apple Customer Care 1-800-692-7753 or 1-800-676-2775. to purchase it. Then within 3 days you will get an email with a code which you can use to download Lion from the App Store. The price is $19.99.
Lion will require at least 2gb of RAM but really needs 4gb to run smoothly.
As for third party programs see this list for compatibility with 10.7 http://roaringapps.com/apps:table
Also Lion doesn't run any Power PC programs. To see if you have any Power PC programs go to the Apple in the upper left corner and select About This Mac, then click on More Info. When System Profiler comes up select Applications under Software. Then look under Kind to see if any of your applications are listed as Power PC. Universal and Intel will run under Lion.
Before Mac switched to Intel processors in 2006 they used Power PC processors from 1994 to 2005. Power PC 601 through 604, G3, G4 and G5. Applications written for the Power PC processors need the application called Rosetta to run on Intel processors. This was part of the Operating System in 10.4 and 10.5 but was an optional install in 10.6. With 10.7 Lion Apple dropped all support for Power PC applications. -
I need help with doing a system wipe/re-install
I want to completely wipe my Macbook Pro (running Mountain Lion) and do a OS reinstall so that it is as if it was just taken out of the box. I have already moved files I want to keep over to an external. My question is this, do I need to do anything in regards to Microsoft Office or iTunes? Do I need to deauthorize my iTunes or my Microsoft Office activation code? Also, how do I even go about doing this system reset?
Follow these instructions step by step to prepare a Mac for sale:
Step One - Back up your data:
A. If you have any Virtual PCs shut them down. They cannot be in their "fast saved" state. They must be shut down from inside Windows.
B. Clone to an external drive using using Carbon Copy Cloner.
1. Open Carbon Copy Cloner.
2. Select the Source volume from the Select a source drop down menu on the left side.
3. Select the Destination volume from the Select a destination drop down menu on the right
side.
4. Click on the Clone button. If you are prompted about creating a clone of the Recovery HD be
sure to opt for that.
Destination means a freshly erased external backup drive. Source means the internal
startup drive.
Step Two - Prepare the machine for the new buyer:
1. De-authorize the computer in iTunes! De-authorize both iTunes and Audible accounts.
2, Remove any Open Firmware passwords or Firmware passwords.
3. Turn the brightness full up and volume nearly so.
4. Turn off File Vault, if enabled.
5. Disable iCloud, if enabled: See.What to do with iCloud before selling your computer
Step Three - Install a fresh OS:
A. Snow Leopard and earlier versions of OS X
1. Insert the original OS X install CD/DVD that came with your computer.
2. Restart the computer while holding down the C key to boot from the CD/DVD.
3. Select Disk Utility from the Utilities menu; repartition and reformat the internal hard drive.
Optionally, click on the Security button and set the Zero Data option to one-pass.
4. Install OS X.
5. Upon completion DO NOT restart the computer.
6. Shutdown the computer.
B. Lion and Mountain Lion (if pre-installed on the computer at purchase*)
Note: You will need an active Internet connection. I suggest using Ethernet if possible because
it is three times faster than wireless.
1. Restart the computer while holding down the COMMAND and R keys until the Mac OS X
Utilities window appears.
2. Select Disk Utility from the Mac OS X Utilities window and click on the Continue button.
3. After DU loads select your startup volume (usually Macintosh HD) from the left side list. Click
on the Erase tab in the DU main window.
4. Set the format type to Mac OS Extended (Journaled.) Optionally, click on the Security button
and set the Zero Data option to one-pass.
5. Click on the Erase button and wait until the process has completed.
6. Quit DU and return to the Mac OS X Utilities window.
7. Select Reinstall Lion/Mountain Lion and click on the Install button.
8. Upon completion shutdown the computer.
*If your computer came with Lion or Mountain Lion pre-installed then you are entitled to transfer your license once. If you purchased Lion or Mountain Lion from the App Store then you cannot transfer your license to another party. In the case of the latter you should install the original version of OS X that came with your computer. You need to repartition the hard drive as well as reformat it; this will assure that the Recovery HD partition is removed. See Step Three above. You may verify these requirements by reviewing your OS X Software License. -
What are the supported Macintosh Operating System versions for IBM SPSS Statistics 18,19 and 20?
Question
I would like to know what are the supported Macintosh Operating system versions for IBM SPSS Statistics versions 18, 19 and 20?
Answer
Please see the list below:
- IBM SPSS Statistics 18 and 19 releases are supported on Apple Macintosh OS 10.5 (Leopard) and 10.6 (Snow Leopard) with Intel processor.
- IBM SPSS Statistics 20 release is supported on Apple Macintosh OS 10.6 (Snow Leopard) and 10.7 (Lion) with Intel processor.
- The IBM SPSS Statistics versions 18 and 19 are not supported on Mac OS 10.7 (Lion).
THIS MEANS THAT TO USE LION ONE FIRST HAS TO UPGRADE TO SPSS STATISTICS 20.Whilst the 2012-02-15 edition of IBM's matrix does not mention Lion, a few users have noted that:
• 18.0 can be troublesome
• an updated version of 18.x should be better.
Related files
PASWStatistics_1 803_Mac_Patch.dmg and IBM SPSS Statistics 18.0.3.4 Hotfix Mac.zip are no longer available from the spss.com domain, and I could not find them in an IBM domain. If you download from unofficial sources, proceed with caution.
Related pages
In Apple Support Communities:
• will PASW (SPSS) 18 work with LION
• PASW statistics 18 crashes every time
• Java Virtual Machine & SPSS 18 with a question from me.
Elsewhere:
• SPSS on Lion « Decorator Pattern
• SPSS / PASW Mac Patch 18.0.3 and Graphing Fix | The Personal Website of Philip Fizur
• Patching PASW 18 (or SPSS 18) for Mac OS X (Leopard, Snow Leopard, Lion) to version 18.0.3.1
• and other sources, including one domain that I treat as reputable but I'll respectfully not share that link here.
At a glance, you might find that 18.0.3.4 is compatible with Lion.
Maybe you are looking for
-
How to get system restored after replacing hard drive.
Bought a MacBook Pro about two years ago, hard drive failed and was replaced. Any way to get my iphoto, imovie, etc back on computer without having to pay for it since it originally came with the computer when I bought it?
-
How do i create a target class to target it to a Rule or monitor
Hi All, How do i create a target class to target it to a Rule or monitor. When we create a rule or monitor we target it to a specific class or classes of objects. Like in the example of the below screenshot. I want to know how do i create my own cust
-
Using JCom for getting the user name
I am using jcom610-win.exe and weblogic610sp2_win.exe .I need to use the Jcom for getting the user name of the NT Iser Logged in.I have got the process for this on the page at http://e-docs.bea.com/wls/docs61/jcomreference/Security.html .But this pag
-
My iphone 4 said it was searching for signal then told me i needed to restore it and once i tried to restore it wouldnt allow me to complete restoring it, so my phone is disable
-
Hi, I want to call a BPEL process through the ESB using java. How can i do it? And if my BPEL process is synchronous, how can i route the reply back to the java class that is waiting for the response?