Does Curve use Wi-Fi..?
my GF has just gotten a curve with a measely 100Mb allowance, we have setup wi-fi to use in th home, but when we use it the wifi icon disapears from the top and the 3G icon remains, this tells me its using data via 3G rather than wi-fi- when turn off 3G Mobile Network it would not load the pages unless it was switched back on?? the youtube app worked with it off
seems like these devices are setup to use 3G regardless of having wi-fi or not- my Samsung Jet uses wi-fi only if it is connected to a wifi network, then it will use 3G...
how does she set up the phone so it works in same manner?
thanks
Hi snage,
Welcome to the Support Community!
If you are not seeing the Wi-Fi® indicator on the screen, this indicates that you are not connected to the Wi-Fi® network and not using services over Wi-Fi®. Please try following the steps outlined in this Help Blog post to connect to the Wi-Fi® network. "How to connect to a Wi-Fi network using a BlackBerry smartphone" http://bbry.lv/oXh7oV
Hope this helps.
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!
Similar Messages
-
What is a transfer curve and what does pre-flight mean when it says "transfer curve used"?
What is a transfer curve and what does pre-flight mean when it says "transfer curve used"?
http://dx.aip.org/advisor/transfer_curve.html has some insight.
Basically, someone who prepared the PDF or an image in it used a magic trick that could cause it to print differently from how it is on screen. -
Restore Conact on New Curve using back up from the old
My wifes 3G curve died over the weekend and she is getting her new one today. I was wonding if I can restore her contact(address book and BBM) via the Device Switch WIzard on the desktop manager?
Solved!
Go to Solution.If it is "dead" as you state, and won't power up, it'll be quite difficult using the Switch Device Wizard. However, that method is ideal.
Now, does she have a recent backup of the old device, she would have made using the Desktop Software, or does she use BlackBerry Protect on her old device?
If she has a backup, she can use the Desktop Software > Device > Restore and the system should select the most recent backup or you can search to find it and set it to restore to the new device, getting all contacts, messages, calendar, etc.
Let us know what you need help with.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
The application does not use the screen and run in the background
Hi
I have downloaded a package of j2me Midlet
from [link] here [link]
and try to reuse the code
but I get the following error when running the code:-
The application does not use the screen and run in the background
I think the error into one of these two classes
package main;
import javax.microedition.midlet.*;
import javax.microedition.midlet.*;
import javax.microedition.lcdui.*;
import javax.microedition.media.Manager;
import javax.microedition.media.MediaException;
import javax.microedition.media.Player;
import java.io.IOException;
import java.io.InputStream;
public class MainMidlet extends MIDlet implements CommandListener {
private SSGameCanvas gameCanvas ;
private Command exitCommand ;
private Player player = null;
public void startApp() {
try {
// create new game thread
gameCanvas = new SSGameCanvas();
gameCanvas.start(); // start game thread
exitCommand = new Command("Exit",Command.EXIT,1);
gameCanvas.addCommand(exitCommand);
gameCanvas.setCommandListener(this);
Display.getDisplay(this).setCurrent(gameCanvas);
catch (java.io.IOException e)
e.printStackTrace();
try {
// start sounds
InputStream in = getClass().getResourceAsStream("/resource/startfly.wav");
player = Manager.createPlayer(in,"audio/x-wav");
player.setLoopCount(1);
player.start();
catch (MediaException ex)
ex.printStackTrace();
catch (IOException ex)
ex.printStackTrace();
public void pauseApp() {
public void destroyApp(boolean unconditional) {
if (player != null) {
player.close();
System.gc();
public void commandAction(Command command, Displayable displayable) {
if (command == exitCommand)
destroyApp(true);
notifyDestroyed();
package main;
import java.io.IOException;
import javax.microedition.lcdui.*;
import javax.microedition.lcdui.game.*;
public class SSGameCanvas extends GameCanvas implements Runnable {
protected GameManager gameManager;
protected boolean running;
private int tick=0;
private static int WIDTH;
private static int HEIGHT;
private int mDelay = 20;
Form mainForm;
Display display;
//private int MaxTime;
public SSGameCanvas() throws IOException{
super(true);
gameManager = new GameManager(5,5,getHeight()-10,getWidth()-10,this);
public void start() {
this.running = true;
Thread t = new Thread(this);
t.start();
public void stop() {
running = false;
public void render(Graphics g) {
WIDTH = getWidth();
HEIGHT = getHeight();
// Clear the Canvas.
g.setColor(0, 0, 50);
g.fillRect(0,0,WIDTH-1,HEIGHT-1);
// draw border
g.setColor(200,0,0);
g.drawRect(0,0,WIDTH-1,HEIGHT-1);
// draw game canvas
gameManager.paint(g);
public void run() {
while (running) {
// draw graphics
render(getGraphics());
// advance to next graphics
advance(tick++);
// display
flushGraphics();
try { Thread.sleep(mDelay); }
catch (InterruptedException ie) {}
public void advance(int ticks) {
// advance to next game canvas
gameManager.advance(ticks);
this.paint(getGraphics());
}Edited by: VANPERSIE on Jul 10, 2012 12:26 PMHi Andi,
Thanks for your reply.
Yes, I have waited for a while and the result doesn't change.
The Porblem here is the application is seen started in visual administrator.Only restart brings up the page back.
Can you please suggest anything.
Thanks and regards
Nagaraj -
Hi there. If I use itunes over home sharing in my house on 2 pc's, does it use data from my internet, or does it work over local home network?
You'd need both computers to be connecting to the same wifi network in order to Home Share.
-
How to invoke a jsp page from java which does not use Servlets?
Hello,
I am working in Documentum. I am trying to invoke a jsp page from another java page which does not use Servlets.
I tried doing this by just instantiating the java class related to the jsp page from my present java class.In my java class related to the jsp page, I have defined onInit() and onRender() methods.
Now, I am trying to call the jsp page from my present java class by just instantiating the java class related to the jsp page. This throws a java.lang.NullPointerException.
Any comments or suggestions on this.Any help would be appreciated.
Thanks,
Ranjith M.VRanjithM.V wrote:
Hello,
Thanks for the reply. One important thing I forgot to mention. I am also using xml component.And?
As this is the standard way used for coding in Documentum, I do not want to use Beans.Well, JSP's should, in and of themselves, contain no functional code. It should all be only display.
Without that is it not possible?What did I say? I said,
masijade wrote:
It is possible, but I very, very, very, much doubt, that it would be worth the effort.And, if you don't know how, a forum is not truely going to be able to help you implement it (at least not in less than a few years time, at which point it would be outdated).
>
Appreciate your understanding and help.
Thanks,
Ranjith M.V -
PS CS6 has a different set of installed fonts than my old PS CS4. How do I get my old fonts back? Don't like most of the newer CS6 fonts. Dell Precision, Windows 7. Does PS use the fonts in the Windows directory or does it use its own? If so, where are they in the directory? A lot of my preferred fonts show in the Windows directory but not in Photoshop, which does not display them within the program. Please help. If I get free fonts (NOT CC fonts) from elsewhere, where do I put them for Photoshop[ CS6 to use them? Thanks.
All versions of Photoshop get their fonts from your OS. Just install any missing font wherever Windows keeps fonts.
I don't do windows myself. -
I'm trying to transfer music from iTunes on an old PC (Windows Vista Home Basic) that uses an external storage device to store the files to a new PC (Windows 7 Starter) that will use that same external storage device. I am also dealing with the new iTunes 11. How can I accomplish this successfully? What folder does iTunes use to store the data in? I've tried several things. Home Sharing caused duplicates but not all songs or apps transfered. It is a large library! I've tried just setting the path in the Advanced Tab of iTunes preferences of the new computer with the external drive connected the same as the path when the external drive is connected to the old computer. This was the best solution so far but still a few artists missing and some apps. Any suggestions?
Here are typical layouts for the iTunes folders:
With iTunes 11 you might also have a Home Videos folder inside iTunes Media.
In the simplest cases you copy the entire iTunes folder from <User's Music> on the source computer to <User's Music> on the target machine, install iTunes, and it "just works"TM.
If the media folder (inside the red outline) has been split out to a separate location then you can copy the library folder (outside the red outline) as before and connect the drive holding the media so that it has exactly the same path as before. If the drive appears as D: on one system and E: on the other then the library won't be able to find the media.
The crucial file is iTunes Library.itl - this contains a record of the tracks that have been added to the library, ratings, play counts, playlists etc.
See also: Make a split library portable.
tt2 -
Pam.conf does not use ldap for password length check when changing passwd
I have already posted this in the directory server forum but since it is to do with pam not using ldap I thought there might be some pam experts who check this forum.
I have dsee 6.0 installed on a solaris 10 server (client).
I have a solaris 9 server (server) set up to use ldap authentication.
bash-2.05# cat /var/ldap/ldap_client_file
# Do not edit this file manually; your changes will be lost.Please use ldapclient (1M) instead.
NS_LDAP_FILE_VERSION= 2.0
NS_LDAP_SERVERS= X, Y
NS_LDAP_SEARCH_BASEDN= dc=A,dc= B,dc= C
NS_LDAP_AUTH= tls:simple
NS_LDAP_SEARCH_REF= FALSE
NS_LDAP_SEARCH_SCOPE= one
NS_LDAP_SEARCH_TIME= 30
NS_LDAP_SERVER_PREF= X.A.B.C, Y.A.B.C
NS_LDAP_CACHETTL= 43200
NS_LDAP_PROFILE= tls_profile
NS_LDAP_CREDENTIAL_LEVEL= proxy
NS_LDAP_SERVICE_SEARCH_DESC= passwd:ou=People,dc=A,dc=B,dc=com?one
NS_LDAP_SERVICE_SEARCH_DESC= group:ou=People,dc=A,dc=B,dc=C?one
NS_LDAP_SERVICE_SEARCH_DESC= shadow:ou=People,dc=A,dc=B,dc=C?one
NS_LDAP_BIND_TIME= 10
bash-2.05# cat /var/ldap/ldap_client_cred
# Do not edit this file manually; your changes will be lost.Please use ldapclient (1M) instead.
NS_LDAP_BINDDN= cn=proxyagent,ou=profile,dc=A,dc=B,dc=C
NS_LDAP_BINDPASSWD= {NS1}6ff7353e346f87a7
bash-2.05# cat /etc/nsswitch.conf
# /etc/nsswitch.ldap:
# An example file that could be copied over to /etc/nsswitch.conf; it
# uses LDAP in conjunction with files.
# "hosts:" and "services:" in this file are used only if the
# /etc/netconfig file has a "-" for nametoaddr_libs of "inet" transports.
# the following two lines obviate the "+" entry in /etc/passwd and /etc/group.
passwd: files ldap
group: files ldap
# consult /etc "files" only if ldap is down.
hosts: files dns
ipnodes: files
# Uncomment the following line and comment out the above to resolve
# both IPv4 and IPv6 addresses from the ipnodes databases. Note that
# IPv4 addresses are searched in all of the ipnodes databases before
# searching the hosts databases. Before turning this option on, consult
# the Network Administration Guide for more details on using IPv6.
#ipnodes: ldap [NOTFOUND=return] files
networks: files
protocols: files
rpc: files
ethers: files
netmasks: files
bootparams: files
publickey: files
netgroup: ldap
automount: files ldap
aliases: files ldap
# for efficient getservbyname() avoid ldap
services: files ldap
sendmailvars: files
printers: user files ldap
auth_attr: files ldap
prof_attr: files ldap
project: files ldap
bash-2.05# cat /etc/pam.conf
#ident "@(#)pam.conf 1.20 02/01/23 SMI"
# Copyright 1996-2002 Sun Microsystems, Inc. All rights reserved.
# Use is subject to license terms.
# PAM configuration
# Unless explicitly defined, all services use the modules
# defined in the "other" section.
# Modules are defined with relative pathnames, i.e., they are
# relative to /usr/lib/security/$ISA. Absolute path names, as
# present in this file in previous releases are still acceptable.
# Authentication management
# login service (explicit because of pam_dial_auth)
login auth requisite pam_authtok_get.so.1 debug
login auth required pam_dhkeys.so.1 debug
login auth required pam_dial_auth.so.1 debug
login auth binding pam_unix_auth.so.1 server_policy debug
login auth required pam_ldap.so.1 use_first_pass debug
# rlogin service (explicit because of pam_rhost_auth)
rlogin auth sufficient pam_rhosts_auth.so.1
rlogin auth requisite pam_authtok_get.so.1
rlogin auth required pam_dhkeys.so.1
rlogin auth binding pam_unix_auth.so.1 server_policy
rlogin auth required pam_ldap.so.1 use_first_pass
# rsh service (explicit because of pam_rhost_auth,
# and pam_unix_auth for meaningful pam_setcred)
rsh auth sufficient pam_rhosts_auth.so.1
rsh auth required pam_unix_auth.so.1
# PPP service (explicit because of pam_dial_auth)
ppp auth requisite pam_authtok_get.so.1
ppp auth required pam_dhkeys.so.1
ppp auth required pam_dial_auth.so.1
ppp auth binding pam_unix_auth.so.1 server_policy
ppp auth required pam_ldap.so.1 use_first_pass
# Default definitions for Authentication management
# Used when service name is not explicitly mentioned for authenctication
other auth requisite pam_authtok_get.so.1 debug
other auth required pam_dhkeys.so.1 debug
other auth binding pam_unix_auth.so.1 server_policy debug
other auth required pam_ldap.so.1 use_first_pass debug
# passwd command (explicit because of a different authentication module)
passwd auth binding pam_passwd_auth.so.1 server_policy debug
passwd auth required pam_ldap.so.1 use_first_pass debug
# cron service (explicit because of non-usage of pam_roles.so.1)
cron account required pam_projects.so.1
cron account required pam_unix_account.so.1
# Default definition for Account management
# Used when service name is not explicitly mentioned for account management
other account requisite pam_roles.so.1 debug
other account required pam_projects.so.1 debug
other account binding pam_unix_account.so.1 server_policy debug
other account required pam_ldap.so.1 no_pass debug
# Default definition for Session management
# Used when service name is not explicitly mentioned for session management
other session required pam_unix_session.so.1
# Default definition for Password management
# Used when service name is not explicitly mentioned for password management
other password required pam_dhkeys.so.1 debug
other password requisite pam_authtok_get.so.1 debug
other password requisite pam_authtok_check.so.1 debug
other password required pam_authtok_store.so.1 server_policy debug
# Support for Kerberos V5 authentication (uncomment to use Kerberos)
#rlogin auth optional pam_krb5.so.1 try_first_pass
#login auth optional pam_krb5.so.1 try_first_pass
#other auth optional pam_krb5.so.1 try_first_pass
#cron account optional pam_krb5.so.1
#other account optional pam_krb5.so.1
#other session optional pam_krb5.so.1
#other password optional pam_krb5.so.1 try_first_pass
I can ssh into client with user VV which does not exist locally but exists in the directory server. This is from /var/adm/messages on the ldap client):
May 17 15:25:07 client sshd[26956]: [ID 634615 auth.debug] pam_authtok_get:pam_sm_authenticate: flags = 0
May 17 15:25:11 client sshd[26956]: [ID 896952 auth.debug] pam_unix_auth: entering pam_sm_authenticate()
May 17 15:25:11 client sshd[26956]: [ID 285619 auth.debug] ldap pam_sm_authenticate(sshd VV), flags = 0
May 17 15:25:11 client sshd[26956]: [ID 509786 auth.debug] roles pam_sm_authenticate, service = sshd user = VV ruser = not set rhost = h.A.B.C
May 17 15:25:11 client sshd[26956]: [ID 579461 auth.debug] pam_unix_account: entering pam_sm_acct_mgmt()
May 17 15:25:11 client sshd[26956]: [ID 724664 auth.debug] pam_ldap pam_sm_acct_mgmt: illegal option no_pass
May 17 15:25:11 client sshd[26956]: [ID 100510 auth.debug] ldap pam_sm_acct_mgmt(VV), flags = 0
May 17 15:25:11 client sshd[26953]: [ID 800047 auth.info] Accepted keyboard-interactive/pam for VV from 10.115.1.251 port 2703 ssh2
May 17 15:25:11 client sshd[26953]: [ID 914923 auth.debug] pam_dhkeys: no valid mechs found. Trying AUTH_DES.
May 17 15:25:11 client sshd[26953]: [ID 499478 auth.debug] pam_dhkeys: get_and_set_seckey: could not get secret key for keytype 192-0
May 17 15:25:11 client sshd[26953]: [ID 507889 auth.debug] pam_dhkeys: mech key totals:
May 17 15:25:11 client sshd[26953]: [ID 991756 auth.debug] pam_dhkeys: 0 valid mechanism(s)
May 17 15:25:11 client sshd[26953]: [ID 898160 auth.debug] pam_dhkeys: 0 secret key(s) retrieved
May 17 15:25:11 client sshd[26953]: [ID 403608 auth.debug] pam_dhkeys: 0 passwd decrypt successes
May 17 15:25:11 client sshd[26953]: [ID 327308 auth.debug] pam_dhkeys: 0 secret key(s) set
May 17 15:25:11 client sshd[26958]: [ID 965073 auth.debug] pam_dhkeys: cred reinit/refresh ignored
If I try to then change the password with the `passwd` command it does not use the password policy on the directory server but the default defined in /etc/default/passwd
bash-2.05$ passwd
passwd: Changing password for VV
Enter existing login password:
New Password:
passwd: Password too short - must be at least 8 characters.
Please try again
May 17 15:26:17 client passwd[27014]: [ID 285619 user.debug] ldap pam_sm_authenticate(passwd VV), flags = 0
May 17 15:26:17 client passwd[27014]: [ID 509786 user.debug] roles pam_sm_authenticate, service = passwd user = VV ruser = not set rhost = not set
May 17 15:26:17 client passwd[27014]: [ID 579461 user.debug] pam_unix_account: entering pam_sm_acct_mgmt()
May 17 15:26:17 client passwd[27014]: [ID 724664 user.debug] pam_ldap pam_sm_acct_mgmt: illegal option no_pass
May 17 15:26:17 client passwd[27014]: [ID 100510 user.debug] ldap pam_sm_acct_mgmt(VV), flags = 80000000
May 17 15:26:17 client passwd[27014]: [ID 985558 user.debug] pam_dhkeys: entered pam_sm_chauthtok()
May 17 15:26:17 client passwd[27014]: [ID 988707 user.debug] read_authtok: Copied AUTHTOK to OLDAUTHTOK
May 17 15:26:20 client passwd[27014]: [ID 558286 user.debug] pam_authtok_check: pam_sm_chauthok called
May 17 15:26:20 client passwd[27014]: [ID 271931 user.debug] pam_authtok_check: minimum length from /etc/default/passwd: 8
May 17 15:26:20 client passwd[27014]: [ID 985558 user.debug] pam_dhkeys: entered pam_sm_chauthtok()
May 17 15:26:20 client passwd[27014]: [ID 417489 user.debug] pam_dhkeys: OLDRPCPASS already set
I am using the default policy on the directory server which states a minimum password length of 6 characters.
server:root:LDAP_Master:/var/opt/SUNWdsee/dscc6/dcc/ads/ldif#dsconf get-server-prop -h server -p 389|grep ^pwd-
pwd-accept-hashed-pwd-enabled : N/A
pwd-check-enabled : off
pwd-compat-mode : DS6-mode
pwd-expire-no-warning-enabled : on
pwd-expire-warning-delay : 1d
pwd-failure-count-interval : 10m
pwd-grace-login-limit : disabled
pwd-keep-last-auth-time-enabled : off
pwd-lockout-duration : disabled
pwd-lockout-enabled : off
pwd-lockout-repl-priority-enabled : on
pwd-max-age : disabled
pwd-max-failure-count : 3
pwd-max-history-count : disabled
pwd-min-age : disabled
pwd-min-length : 6
pwd-mod-gen-length : 6
pwd-must-change-enabled : off
pwd-root-dn-bypass-enabled : off
pwd-safe-modify-enabled : off
pwd-storage-scheme : CRYPT
pwd-strong-check-dictionary-path : /opt/SUNWdsee/ds6/plugins/words-english-big.txt
pwd-strong-check-enabled : off
pwd-strong-check-require-charset : lower
pwd-strong-check-require-charset : upper
pwd-strong-check-require-charset : digit
pwd-strong-check-require-charset : special
pwd-supported-storage-scheme : CRYPT
pwd-supported-storage-scheme : SHA
pwd-supported-storage-scheme : SSHA
pwd-supported-storage-scheme : NS-MTA-MD5
pwd-supported-storage-scheme : CLEAR
pwd-user-change-enabled : off
Whereas /etc/default/passwd on the ldap client says passwords must be 8 characters. This is seen with the pam_authtok_check: minimum length from /etc/default/passwd: 8
. It is clearly not using the policy from the directory server but checking locally. So I can login ok using the ldap server for authentication but when I try to change the password it does not use the policy from the server which says I only need a minimum lenght of 6 characters.
I have read that pam_ldap is only supported for directory server 5.2. Because I am running ds6 and with password compatability in ds6 mode maybe this is my problem. Does anyone know of any updated pam_ldap modules for solaris 9?
Edited by: ericduggan on Sep 8, 2008 5:30 AMyou can try passwd -r ldap for changing the ldap passwds...
-
Mail does not use correct outgoing server
Problem
Mail in Mavericks (and also IOS6 snf 7) does not use the outgoing smtp server associated with the account being used. This results in either a failure to send or mail being put into the wrong "Sent" folder.
Background
I have most of my non-icloud mail pulled down to a home server from which my laptops and ios devices access various accounts using imap. The local home server also provides smtp and relays all mail to my ISP. Recently I have been switching from an old home server (Mac Mini) to a new one (Raspberry pi running the debian Raspbian version with fetchmail, Dovecot and postfix setup).
While making the changeover I had access to both the old server and the new server enabled on my laptop. Naturally the majority of the settings (Name, email address etc) were the same although the name and address of the server to be used for both incoming and outgoing mail were different. This seemed tp work fine for incoming. However when I tested outgoing mail the copy that should appear in the "sentt" box went missing. This usually indicates some mistake in the setting of the sent mail folder on the accounts but this all checked out.
I eventually found the missing outgoing mail intended to go through the new server in the sent box on the old server. Further trials showed that no matter what I did the outgoing would always default to the old (and therefore first set up) outgoing server.
Deleting the old account and the old outgoing server of course should cure the problem and will eventually be the solution for me when I kill the old server. But i wanted to get to the bottom of the problem in case it reappeared in other contexts. Checking the "use only this server" box produced failure to send rather than the correct result.
Trialing various alterntaive settings showed that the problem occurs when there are two outgoing servers with the email address in the settings and the user name on the outgoing server name being the same. I had assumed that changing the description field would distinguish between the various settings; however this did not work. Changing the Name Field did work eg by putting (O) after my name.
It appears therefore that mail selects the outgoing server on the basis of email address (with the full name included) and user name (trrespective of the actual server or the Description that shows in the smtp server listing. In some ways this is logical but it produces problems in the context I have described and would also be a difficulty if you wanted to use an alternative server when in a different location.
I have trawled support and elsewhere for any thing similar. Lots of mail problems (don't get me started on the way icloud loses outgoing each time you edit the list!) but I have not found any posts on precisiely this point.
IOS devices seem to have similar problems, but a quick attempt at a similar solution does not work, and I cannot be bothered to test the options. I will simply clean them out and put in the new accounts.
Advice
Grateful for any comments or advice from people who have encountered similar problems and whether my diagnosis if correct. Have I missed any obvious corrections that would clear this up. I do not know whether this is a Mavericks issue or also appears in earlier OSX versions.
CPEPeter,
Where ever the Sent and Trash folders show in the Sidebar, highlight first one, and then the other, followed by clicking on Mailbox in the Menubar, and choosing Use This Mailbox For, and choose the function.
Keep us posted on your progress.
Ernie -
Error while doing cloning using Duplicate command
Hi,
I am facing issue while doing clonning using duplicate command 'Active database'
The error i am facing is as follows.
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 02/19/2013 07:31:10
RMAN-05501: aborting duplication of target database
RMAN-03015: error occurred in stored script Memory Script
RMAN-03009: failure of backup command on c14 channel at 02/19/2013 07:31:09
ORA-17628: Oracle error 19510 returned by remote Oracle server
Please help me in this.Not able to resolve it
ThanksAman wrote:
Hi,
I am facing issue while doing clonning using duplicate command 'Active database'
The error i am facing is as follows.
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 02/19/2013 07:31:10
RMAN-05501: aborting duplication of target database
RMAN-03015: error occurred in stored script Memory Script
RMAN-03009: failure of backup command on c14 channel at 02/19/2013 07:31:09
ORA-17628: Oracle error 19510 returned by remote Oracle server
Please help me in this.Not able to resolve it
Thanks[oracle@ora11gr2ee ~]$ oerr ora 17628
17628, 00000, "Oracle error %s returned by remote Oracle server"
// *Cause: Oracle server on the remote instance has returned an error.
// *Action: Look at remote instance alert log/trace file for more information
// and take appropriate action or contact Oracle Support Services
// for further assistance
Seems pretty straightforward... is the target instance up? -
Does anyone use a LaCie external hard drive with their Mac using imovie '09? I have some questions.
Does anyone use a LaCie external hard drive with their Mac using imovie '09? I have some questions.
Are you actually having a problem with the new Lacie drive, or are you just asking is the Lacie drive somehow different from your old G-Drive?
From a connection standpoint, most Lacie desktop drives have both USB and FireWire connections, just like the G-Drives do. You would connect and use it the same as a G-Drive.
Regarding capturing to the external HD, if you are using a camcorder that has FireWire (iLink) connection, it is not advisable to have an external FireWire HD connected to your Mac at the same time as your camcorder; there are often communication conflicts between the camcorder and the hard drive if they are connected at the same time. The conflicts usually appear as either dropped frames or a complete freeze. This is more common with Canon miniDV camcorders but I have also seen this behavior with Sony miniDV camcorders. (The problem is the camcorder's FW implementation, not the hard drive.) The workaround is to capture to your Mac's internal HD and later copy the captured video to your external HD. -
Does Aperture use Adobe Camera Raw in any way?
Does Aperture use Adobe Camera Raw in any way? Is it important than I upgrade ACR if I do not use Photoshop?
JerryThanks for the relies, guys!
I suspected that there was no connection between Aperture and ACR, but wanted confimation of that fact. You've answered my question.
Thanks again,
Jerry -
My table of contents does not use the entry style I select for words in the paragraph that have character styles applied to them in the chapter, so some of the letters, specifically parameters, are showing up green, which is fine in the chapter but not in the TOC. I can manually fix this in the TOC by changing the character style to none after the toc has been generated, but I don't want to do this.
What application are you running? Please ask this in the forum of the product you're using.
-
My website is telling users to install a flash/shockwave plug in but my site does not use either.
Like I said in the title we are getting the pop up bar asking users to install a flash plug in but there are not any flash objects on our site. I did an experiment and I found when I disable the shockwave plug-in on a machine that has it installed I get the pop-up and when I enable it on a machine that has it installed the pop-up goes away. I think I might have pin pointed the problem to a tracking script because when I remove the script the website does not ask for a plug-in. I contacted the people who made the script and they told me their script does not use flash in anyway. Does anyone have any idea why our useres are being asked to install the plug-in?
Here is the pop-up:Do you have any advertising on the site that could be using shockwave? If not the script you mention must somehow be using it somehow, you have even confirmed this removing it and there is no prompt.
What happens if you try it using another browser such as Firefox?
regards
Mike
Maybe you are looking for
-
I like to downgrade my iphone 4 os5.1 to 4.3.5
i have iphone 4 with os 4.3.5 but i upgrade this to os 5.1 but now i want to downgrade to 4.3.5 please help.
-
How to redirect to a page (without branching and without pl/sql)
Hi, Have a requirement where when a user log into the application, the APP_USER must be checked against the list of users maintained in a database table, if APP_USER name exist in the table, the user must be redirected to the home page else user must
-
Error 15 at "Run VI" Invoke Node When Building a LabVIEW Executable
I am trying to run a vi by using the "run VI" method of the invoke node. The source code works perfect. However, I cannot run the vi when I use the executable version. Specifically, I get the Error code 15 at the "error out" output of the invoke node
-
Pop-up menue created by Fireworks 8 does not work well in Dreamweaver 8
Hi there, I have experienced some strange behaviour of Dreamweaver 8 with respect to am enuebar with pop-up-Menue-HTML created by Fireworks 8. Having designed the pop-up menue in Fireworks 8 all works fine if you view it through Firewoks. After havin
-
Can't See Shared Harddrive on the My Desktop
I just recently hooked up the EABS. I would like to share my hard drive between two computers. I see the hard drive information in the airport utility but I don't see it or know how to access it. Could someone please let me know how to access the dri