Does DCNM ver 5.2 on Nexus 7k manage nexus 5k??

Dear ,
Does DCNM (DCNM-N7K-K9) ver 5.2 on Nexus 7k manage nexus 5k??
thanks
Ahmed

Yes. DCNM runs on a server though - not on a Nexus 7k itself.
DCNM for LAN Essentials Edition is free for Nexus 1000-5000 series and will manage Nexus 7000s with the fee-based license. See Table 5 on the Product Data Sheet.
Product comaptibility details are listed in the Release Compatibility Matrix .

Similar Messages

  • Does CS3 vers 5.0.4 work on Snow Leopard (10.6)

    Does CS3 vers 5.0.4 work on Snow Leopard (10.6)

    Yes.
    I had CS3 and CS4 on my MBP with Snow Leopard.

  • Firfox Does not open at all not even Profile Manager.

    Ok so as of i believ yesterday, Firefox does not open. I can click on the Firefox icon a million times and in my taskmanager it will show all the instances of firefox running, however, it does not open and i am forced to use IE (which i hate). I have looked through the trouble shooting guide and was recommended to create a new profile, and when i try to open the profile manager, it does the same thing, shows up in task manager but does not open the Profile Manager.
    Now i have uninstalled Firefox TWICE and even selected the checkmark which deleted all the setting and bookmarks the second time to see if that helped. But it does the same thing.
    Please HELP ME!! i can't express how mucvh i hate IE and will die if i have to continue using it. THANKS FOR EVERYTHING!

    Solved. (or resolved)
    G'day. I'm visiting on my Firefox browser - Yay. Thought I'd update this. After I wrote this last night, (with IE browser) the confirmation e-mail's link wouldn't even work.
    I deleted the offending program. I used CC Cleaner to run through the computer. Still no go. I went to bed with AVG scanning everything.
    I woke to find AVG had done it's work, finding 2 problems and fixed. Still no access to mozilla.
    I shut down whole computer (intending to start in safe mode). Got distracted and missed the bootup prompt. Logged on anyway, so I'd have something to tell the 'help' line here.
    Woo hoo! I must have done something right, because here I am, via the link in last night's email.
    The offending program was via 'Ancestry . com'. I'm off to tell them now.
    I'm hoping this might assist someone else. Take care - Jo

  • How long does it take to download the adobe application manager?

    how long does it take to download the adobe application manager?

    It will depend on the speed of your Internet connection.  It is a fairly quick and efficient process over a high speed connection.  Downloads are often completed in less than a minute.

  • Does SRM 7 SC and PO Supports funds management with out PPS??

    Hi All,
    Does SRM 7 SC and PO Supports funds management with out PPS??
    Abdul Raheem

    Hi,
    Do you mean Public sector package is by using PPS. I am aware that SRM PPS supports Funds management.
    But I dont want to use PPS .
    I want Funds management integartion at SC and PO in SRM 7 Core not by PPS
    Abdul Raheem

  • How does the Convert Command Work Under the Catalogue Manager?

    How does the Convert Command Work Under the Catalogue Manager?

    My suggestion would be that you download the pdf version of the organizer help file:
    http://helpx.adobe.com/pdf/elements-organizer_reference.pdf
    Start with page 57 for catalogs.
    I am sure you'll have a better understanding of backup/restore and converting when you understand what a catalog is.
    Please come back with your questions afterward .

  • Does anyone face this problem JBO-27024 and manage to handle it?

    Hi All,
    Does anyone face this problem JBO-27024 and manage to handle it?
    Thanks

    Chris - I get a null pointer exception whenever I run my application if I click on a button; can you fix that too? ;)
    User - it would help if you could post a single post with the full error message, what you are trying to do, etc. The other thread where you asked the same question had the same problem - you kept giving out little bits and pieces of the problem - it makes it really hard.
    John

  • DCNM 6.1.1a and Nexus 5020

    Hi all,
    I've got a problem that I am not able to figure out.
    I've got 2 nexus 5020 running
    Software
      system:    version 5.0(2)N2(1)
      system image file is:    bootflash:/n5000-uk9.5.0.2.N2.1.bin
    Hardware
      cisco Nexus5020 Chassis ("40x10GE/Supervisor")
    I use Nagios for management and so far, everything is working fine. Since a couple of days, I was thinking to install dcnm 6.1.1a on a red hat linux to test the app and see what can I do with the nexus. The problem is that every time that I try to work with the DCNM app, the CPU goes up a lot.
    The show process cpu history is the following:
                1
       1 1 2 2 2014 3 1
       175785558555676737556055796009577855685588655825576458656955
    100 #
    90 #
    80 #
    70 #
    60 #
    50 # #
    40 # #
    30 # # #
    20 # # # #### # #
    10 ################################################### ########
       0....5....1....1....2....2....3....3....4....4....5....5....
                 0    5    0    5    0    5    0    5    0    5
    CPU% per second (last 60 seconds)
    # = average CPU%
       111111111111111111111111111111111111111111111111111111111111
       000000000000000000000000000000000000000000000000000000000000
       000000000000000000000000000000000000000000000000000000000000
    100 ************************************************************
    90 ************************************************************
    80 ***************************************** *******************
    70 ************************************************************
    60 ************************************************************
    50 ************************************************************
    40 ************************************************************
    30 ************************************************************
    20 ******#*****************************************************
    10 ############################################################
       0....5....1....1....2....2....3....3....4....4....5....5....
                 0    5    0    5    0    5    0    5    0    5
    CPU% per minute (last 60 minutes)
    * = maximum CPU% # = average CPU%
        111111111111111111111111111111111111111111111111111111111111111111111111
        335654444333535333333474344735935547557454443544355623332443363242463447
    100
    90
    80
    70
    60
    50
    40
    30
    20 *** * * * * ** ** **** * * *** * * *
    10 ############################################### #########################
       0....5....1....1....2....2....3....3....4....4....5....5....6....6....7.
                 0    5    0    5    0    5    0    5    0    5    0    5    0
    CPU% per hour (last 72 hours)
    * = maximum CPU% # = average CPU%
            1      1 1          1 1  1                  1        1
       799870778787080999797778070770777887797877878760777776770777
       418260550868090312495185010220451125592520612190533039160102
    100  * * * * * * * * * * *
    90 ** * * ****** * ** * * * * * * *
    80 ***************** ** *** * * * ***** * * * ** **
    70 ************************************************************
    60 ************************************************************
    50 ************************************************************
    40 ************************************************************
    30 ************************************************************
    20 ************************************************************
    10 ############################################################
       0....5....1....1....2....2....3....3....4....4....5....5....
                 0    5    0    5    0    5    0    5    0    5
    CPU% per minute (last 60 minutes)
    * = maximum CPU% # = average CPU%
    Could SNMP be the cause of this high CPU? How could I confirm it? Maybe it is a bug but I could not find anything.
    Any ideas or comments are welcomed!
    THanks in advance,
    Fernando

    Just to close this thread, we saw that the average cpu utilization is 10%. The CPU spikes might be due to the polling time or some cosmetic output. There is no output error, no discards, no traffic loss.
    thanks in advance,
    Fernando

  • Does PsCC ver 14.2.1 allow HTML5 ext panels

    I have tried to install a panel written in html5, using PsCC v 14.2.1 and ext manager v 7.1.1.32. I get a message that this will only work with PsCC ver 14,0 to 14.9. Any help or suggestions.
    Thanks,
    vince
    I use iMac with 10.9.3

    Steve,
    No, it is not available thru the exchange.
    Actually, it is part of the actions created and SOLD by Tom Kuyper.
    He understood that at the end of may all panel extensions would require use of HTML5. Being very careful, he prepared his new panel in both ways, using Flash and HTML5. Ext mgr will not install the HTML5 VERSION so I am using the flash version. IT WORKS WONDERFULLY.
    BUT I AM CURIOUS, as is Tony, about this problem. I am sure you saw the attachment images. I have uninstalled and re-downloaded Ext Mgr. There is no new version and the new download and install produced the same refusal to install the new panel. I have searched and found references to this new requirement, including the fact that CS6 and earlier versions will still use the Flash version of the Ext Mgr.
    Any ideas?
    Ps, Tony Kuyper's Luminosity actions are MARVELOUS.
    vince

  • Why does firefox (Ver:3.6.15- Windows XP) keep crashing while in ebay?

    Every time I am in e-bay, fire fox crashes. There is almost no exception to this occurrence and certainly no warning.

    5 years ago the Firefox installer was different than what is being used now, so Firefox should have been installed to the C:\ drive at some point since then, unless you purposely installed it to a non-default location. Let's see where is is installed.
    Right-click the shortcut icon you use to launch Firefox and select Properties.
    Then copy the '''Target''' line using {Ctrl + C} on the keyboard, that line should already be highlighted so all you have to do is hit {Ctrl + C} - and Paste it into a Text program, like Notepad using {Ctrl + V}.
    Is that file path - '''"C:\Program Files\Mozilla\Firefox\firefox.exe"''' or is it '''"F:\''something or other''\Firefox\firefox.exe"''' - ??

  • How do I REMOVE an ADD-ON from my TOOLBAR, when said ADD-ON does NOT show up in my ADD ONS Manager?

    I have been instructed to:
    "When you open Firefox up in the left hand corner there is a drop down box that says "Firefox". Click on this and go to add-ons a new page will open with tabs on the side.
    Click on ADD-ONS, use ADD-ON Manager...."
    That does not happen that way. (I am on Firefox 19.0 for MAC.)
    When I click on Firefox (left hand corner at top of screen) "ADD-ONS" does NOT appear.
    I get "preferences" and "services" plus, of course ABOUT/HIDE/SHOW/QUIT choices.
    Running through ALL choices in PREFERENCES (which was not included as a step in your description) I find NO WAY to "deal with" ADD-ONS in General, Security, Privacy or Advanced.
    "services" says only NO SERVICES APPLY"
    I KNOW that I have an "ADD-ON Manager" I can open that. The ADD-ON that I need to REMOVE/Uninstall/Disable does NOT show there.
    It is an ICON on the lowest level of my toolbars showing above my window. Whether this is an awesome bar, or any other specially named bar I can't tell you, but: LOWEST section.
    This creepy ADD-ON (that I never personally installed) is called PRICEGONG - and it is now opening up a pop-up on all my eBay pages and elsewhere -trying to sell me things.
    It is wasting SO much of my time and I need to get it gone.
    WHAT do I do now? The PRICEGONG company has explanation of what to do to uninstall, but (no surprise) THEIR instructions/steps do not match reality either. RESULT: I can't get RID of this thing and am wasting huge amounts of time now with it.
    WHAT CAN I DO?

    hello, the addons manager is exactly the right place to look for it. please try disabling the addons that are listed there one-by-one (a restart of the browser might be necessary after each step). maybe one of them is bundling this kind of adware.
    [[Disable or remove Add-ons]]

  • I am using 10.6.8 and I cannot get an Imac to appear in workgroup manager, the mac is bound to both AD and OD. I have removed the bindings, rebuilt the mac and also removed it from bot system but still it does not appear in OD in work group manager.

    I have a mac which is connected to a network and is bound to both OD and AD with no issues on my server when I try to manage it through Workgroup manager it does not appear.
    I have unbound it , removed it from both systems completely and even rebuilt it but it still does not appear in WGM.

    If your server is 10.6 and your client is 10.7 you'll have to add it manually to WGM
    via mac address.  10.7 clients don"t automatically appear in 10.6 server wgm

  • Why does reindex documents at Server in the Configuration Manager break the help system?

    Background:
    So, I have a nice hosted help system on Server 9. I'm using the Access database since it's a light load project. It works OK. All admin features work OK (except groups and users bug, unrelated), including reports on search and usage. So, I have been having a devil of a time making a particular search term work in my project: UTS. It's an acronym for a system at my work, and it's important that users be able to search on it. UTS is in several Heading 1s. It's not in the stop list as a typo. Just to be sure, I deleted the whole stop list. I added "UTS" as a topic keyword. It still refuses to find any results. Also, I've noticed some other peculiarities with search: the "context" displayed below the search result is supposed to show the word you searched for in its context, but it never does in my search results. It just shows the first words of the document it's listed as a hit in search. The search is not bad, but these two bugs were odd enough to me to start rooting around for solutions.
    So, I run Server 9 on Windows Server 2008 R2 with Tomcat 7 and JDK 7u17.
    The problem:
    I noticed in all the Server documentation that Adobe crows about the wonderful full text search powered by Lucene, and how it's checked "on" by default in all contexts. It's not in mine. When I check "reindex documents at server," it breaks the project. Literally--Server can't find the project anymore, web calls come back with no answer. Uncheck the box, A-OK. So, why is this wonderful search technology not available to me? Is it because it's not available when using default Access? Or is something else going on here?
    many thanks in advance.
    David Morgan
    Robohelp HTML11/Server 9 user

    The problem is that my data collection software (VisualPlant by EMT) is unable to browse to the National Instruments.LookoutOPCServer. When I added an Identification category to the registry entry for the lookout OPC server I was able to connect but with some odd behavior. My setup is:
    2 machines each running Win NT4 SP6a. One machine is running Lookout as well as several other OPC servers. The other is running my data collection software. I am able to connect to lookout using several client apps on my data collection machine (Kepware's Quick Client, and Matrikon's Client), however my data collection software (VisualPlant) cannot see Lookout. Using the NI server explorer and viewing the properties of all of my OPC servers I noticed that Lookout was the on
    ly one listed that did not have a CatID. By modifying the registry and adding the ID's listed in my original note I was able to connect using VisualPlant, however this exibited some odd behavior. It appears that adding this setting prevents multiple OPC connections to Lookout. If you have any suggestions I would greatly appreciate it.
    Thanks.

  • Does Oracle 8i for Linux include Oracle Enterprise Manager?

    What's the version of the current Oracle 8i for Linux?
    Enterprise Edition?
    null

    Hi,
    Michael (guest) wrote:
    : The latest OEM is in Java. It is included in o8i for Solaris,
    : which I use for an o8i machine at work. They don't seem to
    : include it with the Linux version, though, despite the fact
    that
    : it's Java and theoretically (the key word here...) it should be
    : platform-independent and run on Linux just the same.
    NO, it will not work. You cannot even install since the installer
    for Solaris is a Solaris binary and some windows exe also does
    not work. I guess somebody has to write a better bootstrap proggy
    first...
    I wonder why they did it that way...
    Marcus
    : Bryan Batchelder (guest) wrote:
    : : Oracle8i for Linux is Oracle 8.1.5.0 Enterprise Edition.
    : : As for Oracle Enterprise Manager, they still only have that
    for
    : : NT, but you can download it from OTN.
    : : --Bryan
    : : Gary Young (guest) wrote:
    : : : What's the version of the current Oracle 8i for Linux?
    : : : Enterprise Edition?
    null

  • What does the LoginModule sample do in the Access Manager samples

    hi,
    thanks for reading my question. I just wanted to know what the Login Module sample shows to a user.
    thanks
    dhawanmayur

    Hi Lars,
    Would the information in the link below help you?
    https://websmp208.sap-ag.de/~sapidb/011000358700002294272006E
    From what I understand, the only thing that Service Connector does is to "give the approval and the connection parameters" to your local SAP Router to initiate a network tunnel between your local SAP Router and SAP's SAP Router.
    I hope this helps.

Maybe you are looking for