Does DI 11.7 support exists and non exist in where statment in dataflow

Hi All
Does DI support the exists and not exists iin a dataflow. I am getting and error when using it.
Thanks

details and options to be found here: https://boc.sdn.sap.com/node/20046

Similar Messages

HT4623 I have the original iPad, it does not seem to support ios6 and will no longer connect to iTunes WHY is this

I have the oringinal ipad, it does not seem to support ios6 and will not connect to itunes, WHY is this?

Start here... http://www.apple.com/support/iphone/assistant/itunes/

Does ISE 1.1 support TACACS and H-REAP?

Hello,
Does ISE1.1 support TACACS/TACACS+ and H-REAP mode ?
Also, customer wants to have quick access to the corporate network with some few laptops without going through the Actice Directory? Any suggestion on this?
Thanks
Olu

EAP-TLS does not rely on AD.
CA root cert is installed on ACS for trust and identity.
you can elect to Perform Binary Certificate Comparison with Certificate retrieved from LDAP or Active Directory
Users and Identity Stores >
Certificate Authentication Profile >
Edit: "CN Username"
see the checkbox at the bottom.
I do EAP TLS machine auth only without integrating AD into the policy at all.
hth,
jk

Does iPlanet proxy3.6 support dayofweek and timeofday in ACLs

I tried using dayofweek and timeof day in ACLs so as to allow some users access to Internet during particular time of a day. But when I start the proxy server I get an error stating syntax is not proper. Can anyone tell me if these can be used in ACLs for proxy server. I tried adding the ACLs to generated*.acl. If these can be used can anyone let me know the proper syntax and also if I have to create a separate acl and refer to it in magnus.conf?
OS Solaris7
Proxy: iPlanet Web Proxy Server 3.6

Hi,
NES3.6 is supported under WLS6.0. Could you please put the part of obj.conf
file to proxy request here?
Thanks
Yu Tian
"Benjamin Hyatt" <[email protected]> wrote in message
news:[email protected]..
>
Having a problem getting libproxy to function properly on nes 3.6
Added the proper entries for the plugin in obj.conf; reloaded.
Nes instance starts up fine. If I attempt to access the url (i've definedby
ppath) the app server never get's hit. It's as if the plugin is beingcompletely
ignored.
I've set Debug="ON" hoping to see wlproxy.log in /tmp.... nothing.
I've done this very easily before with wl 5.1.0 and iplanet.
Does the 6.0 sp2 proxy plugin support nes 3.6?
Platform
Solaris 2.6
Any info is greatly appreciated.
Thanks,
/Ben

Does mak book pro support voice and vedio chat on yahoo messenger with windows yahoo messenger on the other line?

dear All,
i am planing to buy Makboocpro 13. but befor muying the mac i need to make sure that it is support the voice and vedio chat on yahoo messenger with another windows yahoo messenger user.
that is very importabt to me cause if not i won't but it
appreciate your feed back
thanks
Hamed Nofal
[email protected]

Hi Joseph,
I have 2011 Mac Book Pro 13 and I have Yahoo 3.0.1 Beta version of Messenger. I am not able to chat with my friends, who are using Windows OS. As a matter of fact, I tried to view my cam on yahoo but somehow it says, "permission denied"!!
Any configuration issue?
Your help is appreciated.
Thank you.

Does Satellite M50 PSM51E supports infrared and BT?

Hello,
I wanted to set up my laptop new and saw that there are infrared and bluetooth drivers installed and also available to download for my laptop model.
I never used it because i did not have any device with Bluetooth or IR.
Now my question is how can I find out if my Laptop really has this features or not?
Thanks for helping

HI,
Thanks for the quick answer. It is a M50 - 181.
I searched for a bluetooth symbol but did not see anything. how should it look like. (is it possible to ad pictures here?)
In the device manager and in the control panel bluetooth is shown, but if I start the bluetooth in the control panel it only shows device not ready. Now I am wondering if there is something like a standard installation from toshiba where this software is installed no matter if the hardware exists or not?!?
There is also nothing shown in the windows explorer.

Does the new browser support norton and roboform auto password fill-ins?

can u use the norton and roboform automatic password fill-ins in the updated 8.01 firefox browser?

Norton is compatible with Firefox 8 if you have applied the current Norton updates.
#How to update Norton and
#things to check during Firefox 8 install are included in the following
#Norton 360 --> http://community.norton.com/t5/Norton-360/Firefox-8-Support-for-Norton-Toolbar/td-p/581640
#NIS --> http://community.norton.com/t5/Norton-Internet-Security-Norton/Firefox-8-Support-for-Norton-Toolbar/td-p/581516
#Also see --> https://support.mozilla.com/en-US/kb/Add-ons%20are%20disabled%20after%20updating%20Firefox
Roboform is compatible with Firefox 8 if you have updated Roboform to at least version 7.6.2
#See --> https://addons.mozilla.org/en-US/firefox/blocked/i45
#Update to Roboform '''''7.6.4''''': http://www.roboform.com/support/news
#Roboform download link: http://www.roboform.com/platforms/browsers/firefox
#'''''Also see''''' --> https://support.mozilla.com/en-US/kb/Add-ons%20are%20disabled%20after%20updating%20Firefox
'''If this reply solves your problem, please click "Solved It" next to this reply when signed-in to the forum.'''
Not related to your question, but...
You may need to update some plug-ins. Check your plug-ins and update as necessary:
*Plug-in check --> http://www.mozilla.org/en-US/plugincheck/
*Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*'''''Adobe PDF Plug-In For Firefox and Netscape''''': [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*'''''Shockwave Flash''''' (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
*Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

Does the MBA 2012 support SDHC and SDXC Cards ?

In the store only SD-cards are mentioned in the tech-specs for the MBA.
In comparison to that : The specs for the MBP are talking about SDXC-card reader.
Thx for your answers
regds
Mirco

The MBair supports SDXC cards at least back to 2011. It's not mentioned in the store but is mentioned in the user manual.
From the 2011 user manual:

Does Weblogic server 8.1 support "LIMIT and OFFSET" in EJB QL?

hi,
Can any one tell me does 8.1 server support "limit" and "offset" keywords in EJB-QL?
I tried to define a finder method in the workshop with the following syntax:
@ejbgen:finder ejb-ql="SELECT OBJECT(o) from EmpBean OFFSET ?1 LIMIT ?2" generate-on="Local" signature="Collection findEmp(java.lang.Integer st,java.lang.Integer en)"
I get the following error
ERROR: ERROR: Error from ejbc: [EJB:011017]Error while reading 'META-INF/weblogic-cmp-rdbms-jar.xml'. The error was:
ERROR: Query:
 EJB Name: EmpBean
 Method Name: findEmp
 Parameter Types: (java.lang.Integer, java.lang.Integer)
SELECT OBJECT(o) from EmpBean OFFSET =>> 1 <<= LIMIT 2
EJB QL Parser Error.
39: unexpected token: 1
What am I doing wrong?
thanks

I could not find any documentation that suggested LIMIT or OFFSET where supported. Some of our developers needed to use limit, in the end all I could suggest was using a dynamic query and setting the maximum number of results see here
.

Hussein Badakhchani

Does my Linksys E2000 support VDSL2?

My dutch ISP (Online) has sent us a new modem/router, a HUAWEI HG655d Home Gateway. I want to bridge it and and carry on using my existing Linksys E2000 router to manage the traffic on my home network.
I've been having problems setting this up and someone has suggested that perhaps it's because the E2000 doesn't support VDSL2.
Can anyone please clear this up for me?
I've also attached a screenshot of the WAN settings page for the new HUAWEI modem/router. Why are there 2 seemingly identical ADSL2+ connections listed, and also 2 seemingly identical VDSL2 connections, all enabled? Can I switch between them at will? If the E2000 doesn't support VDSL2 can I simply choose to use, say, ADSL2+, does the Linksys E2000 support ADSL2+ and what difference would that make? Or is VDSL2 pre-ordained by my ISP and unchangeable?
I'm not too smart about all this stuff, but I really need to sort this out. The kids are getting restless, they'll be coming for me soon, and I've only got so many bullets... ;-)
Thanks in advance
Al

teaforthreeorfour wrote:
Hi again; one of our cats is called Shadster, it's like I'm getting IT advice from our cat lol...
Thanks, I'll run through it all again but try manually setting those IP addresses on the Linksys, and get back to you :-)
Please remember to Kudo those that help you.
Linksys
Communities Technical Support

Need std and non-std baud rates on PXI-8420 (16 channel RS232)

I found a similar request on the knowledge base, and the resolution was possibly NI would make a card on a case-by-case basis.
I need the forementioned PXI card to support std and non-std baud rates (i.e. not a simple xtal change, and the software sets up for 57.6 Kbaud, and it is really 62.5 Kbaud) that is easily configured in LabVIEW/VISA.
The rates I need are as follows:
All std rates (i.e. 1200,2400,4800,9600,...)
10.4K (possible with std ports, but unsure about NI hardware and VISA).
62.5K
Thanks.
62.5K

The golden rule in serial (UART) communication, is that if two communicating partners are within +-2% of each other, they'll happily communicate error-free. Since you often only know one side of the equation, the window narrows to +-1%.
Next, take a look at how baud rates are calculated. On most NI-Serial hardware, there is a 7.3728 MHz oscillator that is divided by 16 (to create the what I'll call the 'base' frequency), and then divided again by a divisor latch. A divisor latch value of 1 yields 460800, 2 = 230400, 3 = 153600, etc. This is where the 'standard' baud rates come from.
However, on some OS's, we divide the clock source again by 4 before it hits the divisor latch. This means 1 = 115200, 2 = 57600, etc. While this does creat
e a set of 'standard' baud rates, it also limits the number of possible baud rates. This is something that will be fixed in the future.
Now hopefully the following table will make sense. In systems that have a base of 460800, we support baud rates that are within +-1% of the following (baudrates marked with * are supported in 115200 base systems):
110-9216*, 9404, 9600*, 9804, 10017, 10240, 10472*, 10716, 10971, 11239, 11520*, 11815, 12126, 12454, 12800*, 13165, 13552, 13963, 14400*, 14864, 15360, 15889, 16457*, 17066, 17723, 18432, 19200*, 20034, 20945, 21942, 23040*, 24252, 25600, 27105, 28800*, 30720, 32914, 35446, 38400*, 41890, 46080, 51200, 57600*, 65828, 76800, 92160, 115200*, 153600, 230400, 460800.
10.4k is supported in both systems at the baud rate 10472.
If you're running at 62.5k when set to 57.6k, then you're likely using a 8 Mhz Oscillator. In this case, you have a base of 500000, and with a divisor latch value of 48 you'll be running at 10416. This cor
responds to a 'normal' baud rate setting of 9600. So if you set your modified card to 9600, you should get 10.416k.

Does Qosmio X300-13O support quad-core?

Well title says it all; does the X300-13O support quad and is it at all possible to upgrade the CPU?
Found this CPU which uses the same socket as the current CPU.
http://bit.ly/iqVZim (I know it is QS)
Regards
Alex

>Does the X300-13O support quad and is it at all possible to upgrade the CPU?
This depends on the chipset and BIOS.
The notebook supports the Mobile Intel(R) PM45 Express Chipset.
Check this Intel page:
http://www.intel.com/products/notebook/chipsets/pm45/pm45-overview.htm
Here you can see that only *Intel Core2 Duo* processor is supported

Itunes support deauthorized myaccount and ignores all emails for 5 days. 6 emails have gone unanswered except for automated responses. Does ITunes support exist anymore? Calls to apple support tell me they can only chat with ITunes which is down for 4 day

My ITunes account had an unauthorized charge. I changed my password and notified ITunes support. They disabled the account, told me to chnge the password and then they would re enable the account. I emailed back that the password was changed, they have not answered or re enabled the account. I have emailed the non-existent person who disabled the account and ITunes support 5 times but the only response has been an automated one. Calls to Apple support only and I was told the ITunes chat for them has been down for 4 days. No answers and no way to get a human respond and no way to get the ITunes account turned back on. Does anybody actually work at ITunes support? Is there anyway to get a human on the phone or chat directly at ITunes support to re enable the account? I am totally fed up with this complete lack of support or response.

Find another app to make an inexpensive purchase from. I know there's stuff for like 99 cents.
If you can make that purchase, but not one with Blood Brothers, then what does that tell you?

My mini ipod appears off and not respond to any commands when pressed the buttons to reset, apple logo appeared and then the apple support site and it shuts down. already tried all the steps, but none worked, and when I plug it into my computer it does no

My mini ipod appears off and not respond to any commands when pressed the buttons to reset, apple logo appeared and then the apple support site and it shuts down. already tried all the steps, but none worked, and when I plug it into my computer it does not appear in the iTunes bar. what do I do?

If MacKeeper corrupted the Recovery partition then even I underestimated its potential for damage. Garbage "cleaning" apps will cause misery but I have not found that the Recovery partition to have been affected by using MacKeeper or anything like it. I doubt that it did so, but I have learned not to underestimate the potential for such things to result in system corruption.
Before concluding your Mac has a hardware failure, try booting OS X Internet Recovery by holding command option r on startup (three fingers). That will force your iMac to bypass the Recovery partition altogether, and convey the ability to create a new one.
An Internet connection will be required (wired or wireless).
At the Mac OS X Utilities screen, select Disk Utility. Select your startup volume (usually named "Macintosh HD") and click the Repair Disk button. Describe any errors it reports in red. If Disk Utility reports "The volume Macintosh HD appears to be OK" in green then you can be reasonably (though not completely) assured your hard disk is in good working order.
Assuming the HD remains usable you can then use Disk Utility to erase it. Reinstall OS X, restore your essential software and other files, and don't reinstall the junk.

I am setting up a new iTunes account and do not have a credit card. When I am setting the new account up it does NOT give me an option of "none" in lieu of an actual credit card. What do I do?

I am setting up a new iTunes account and do not have a credit card. When I am setting the new account up it does NOT give me an option of "none" in lieu of an actual credit card. What do I do?

How did you create it ? There are instructions on this page for creating a new account (the instructions won't work with existing existing account) without giving credt card details : http://support.apple.com/kb/HT2534
e.g. if currently logged into an account then log of it, then find a free app in the store, click on its free 'price', and you should then be able to create a new account during the 'buying' process and get 'none' as an option on the payments screen

Does DI 11.7 support exists and non exist in where statment in dataflow

Similar Messages

Maybe you are looking for