Does Discoverer support Column Security

I'm developing some Reports from payroll Data, Obviously the data is Xtremely Sensitive, Is there any way I can restrict certain Column Information from Certain Users in the same Report/Worksheet.

well the abstaction is supported in tha admin edition and there u double click on the column for which the properties open up. then there one parameter hide from user or sth of that sort is there fill that as yes then that particular column will not be visible to the user (version)
cheers.,
sampath

Similar Messages

  • Does SES11g support ACL security model in ECM11g

    hi Experts:
    Does SES11g support ACL security model in ECM11g?
    All information I got is negative, but need some comfirmation, sometimes documentation is not accurate.
    If the answer is yes, could you give me a doc url I can reference?
    Best regards

    Hi
    I think that you can have the ACL security enabled on SES searching as well . When creating the source on SES there is a option which mentions if the source's ACL security is to be used or not .
    So if that option is selected then I believe the same can be used on ses searching as well .
    Try it and let me know how it works .
    Thanks
    Srinath

  • Need a hint for home office / 871 does not support port-security - FPM ?

    Hi,
    i want to realize the following setup:
    - Central Site 871 with Internet Connection and static IP
    - Home office 871 with Internet Connection and static IP. On that home office router, there should be 2 Vlans: 1 for the office work and one for the user's private PC. All Traffic from the "office" Vlan is being put into a VPN to the central site. All Traffic on the other interface is being natted and goes straight to the internet.
    To minimize security issues, i tried to configure port-security, so that the user cannot connect with his private PC to the office LAN ports and vice versa. Unfortunately, port-security seems not to be supported on the 871 (advanced ip services image).
    Now i looked for an alternative...and came over to FPM (flexible packet matching).
    If i understood right, you can classify packets for example by their source MAC address and if this field matches a specific value (the mac of the work pc), packets can be dropped by a policy.
    Of course i cannot avoid that the user connects the work pc together with his private pc (this is then related to the OS Security to keep out viruses, worms, trojans, etc). But i could/want to restrict the internet access with the work pc through "normal" Internet access - the users should not be able to do that (must use the company's proxy).
    I did the follwing config:
    class-map type access-control match-any c2
    match start l2-start offset 48 size 6 regex "0xabcd1234fedc"
    match field ETHER source-mac regex "abcd1234fedc"
    policy-map type access-control p2
    class c2
    drop
    interface Vlan1
    ip address 192.168.20.1 255.255.255.0
    ip nat inside
    ip virtual-reassembly
    service-policy type access-control input p2
    service-policy type access-control output p2
    As this feature is quite new, i'm not familiar with it's syntax.
    I also tried to use "string" instead of regexp, but i'm still able to connect the office pc to the private Lan and i am able to access the "Internet" (currently it's only setup in a lab).
    As i understood so far, the offset is the value in bits, and size is in bytes. is that correct?
    Has anyone yet some experience with FPM or maybe any hint for me how to realize the requested setup with the 871 routers?
    bets regards,
    Andy

    For the FPM feature to work you will need PHDF files for the protocols you want to scan for to be loaded on your routers. The files can be downloaded from cisco's website. In your case you will have to download ether.phdf file.

  • Does iCloud support sharing secure notes?

    I use secure notes on my Mac to store sensitive data like CC#, SSN, etc.  Is there a method to share these notes with my iOS devices?
    Thanks

    I believe it only supports syncing with other Macs, not iOS devices.  There are, of course, other apps that will accomplish this, such as 1 Password.  Or, you could create password-protected documents using MS Word and upload them to a Dropbox account, then open and view them on your devices using the free Dropbox app.

  • " plug-in name does not support the highest level of security for Safari plug-ins" appear for some plugins in Safari Security "Manage Website Settings"?

    Hi,
    Wondering why "<plug-in name> does not support the highest level of security for Safari plug-ins" appear for some plugins in Safari > Security > "Manage Website Settings"?
    Have been trying to get to the root cause of the problem but did not find much on this. I am trying to figure out what can get the warning to go away completely than using the Allow/Always Allow options for the plug-in
    Thanks,
    Shyam

    Hi Linc,
    Thank you for your response. Here is the screenshot of the warning that I am talking about.
    Here is what I do:
    1. Launch Safari and open its Preferences. I have Safari 7.1 installed on my machine.
    2. Click Security Tab and click Manage WebSite Settings
    3. A window opens showing me all the Plug-ins that I have (listed on the left hand side).
    4. One of them is the Adobe Reader plug-in. When I click Adobe Reader, the following details about the plug-in show up on the right
    I was referring to the highlighted section that warns me about this plug-in not using the highest level of security for Safari Plug-ins.
    Note: I do not see this for all my plug-ins (QuickTime, Adobe Flash Player don't give me this warning) which tells me that there is a way to make the warning go away.
    Thanks again,
    Shyam

  • Does 11g support no auto_increment / auto_assigned columns?

    Hi,
    I am using openJPA and run into following issue when using Oracle 11g:
    "Oracle" does not support auto-assigne d column values. The column may not behave as desired.
    In other words: The database does not support auto_increment values for rows?
    Is there a workaround for that?
    The openJPA community did create some warning for Oracle in their framework:
    https://issues.apache.org/jira/browse/OPENJPA-1090
    However ... the warning does of course not fix anything.
    Is that a workaround for that? Is there a special way of creating Oracle Database so that auto_assigned / auto_incrementor is allowed in fields? I mean currently Oracle does not seem to be compatible to openJPA so we cannot use this database or recommend it using it to our users.
    You can see our sample db configuration that we have been publishing for Oracle here:
    http://code.google.com/p/openmeetings/wiki/Configuration_Oracle_11g
    I would be very happy if we could officially release OpenMeetings with support for Oracle.
    Thank you very much,
    Sebastian Wagner
    Lead Developer OpenMeetings - Open-Source Web-Conferencing
    http://www.openmeetings.de

    seba.wagner wrote:
    Thanks for your answers,
    well of course I do know that Oracle supports sequences, my question is why openJPA does not generate those by default cause the same code works with DBs of other vendors.
    However I am already posting the same question to the openJPA mailing list, maybe they have some workaround for such issue. I guess it must be some kind of configuration or setup problem, not really a coding issue.
    Thanks,
    SebastianActually, it would be a coding issue. For instanced, MS SQL Server does have an auto increment data type. Just define the table with that datatype for a PK column, and no further consideration needed. Oracle is not SQL Server under a different lable. To get a "auto increment" PK, you have to (1) define a sequence, and (2) be sure every insert issued against that table uses/references that sequence to populate that PK column. And the best way to make 100% sure that happens is to write an ON INSERT trigger. And one also needs to be aware that Oracle makes no guarantee that a given sequence number won't be 'wasted', so the behavior is likely different from SQL Server's AUTOINCREMENT data type.
    So... any third pary app written to work with both products needs to be able to take into account all of the differences, of which this is only one. There are ways to deal with this to minimize the burden of maintaining separate code bases, but I'm afraid most vendors take the worst possible approach and simply treat the dbms as a data dump and write to the least common denominator. And lest you think that just because a vendor has a big name they know what they are talking about think again. I've mentioned several times on these forums about the experience I once had with a vendor making his pitch and claiming that his company did not recommend Oracle because "it won't support more than five concurrent connections." I made sure they didn't make the short list.

  • Discoverer 10g does it support clobs

    Does discoverer 10g plus support clobs?
    I'm in the worksheet editor and I'm trying to add items to the worksheet, if I select a item which has an item of number then try to select a clob item then nothing happens the clob item doesnt move to the selected list. I have to move all my clob items into the selected list first then add the rest of items.
    Is this just one of oracle features or are clobs not supported?

    Hi,
    Clobs are supported. However, you cannot combine a aggregrate with a CLOB so you need to add in the detail of any number items.
    It is probably a bug that forces you to add the clob items first.
    Rod West

  • Does the Built-in Windows FTP Client Support a Secure Connection?

    I have set up Server 2008 IIS w/ FTP. I set the SSL setting to require a secure connection. However, I can't connect to the FTP server from the built-in Windows FTP client. I CAN get it to work in FileZilla after modifying my connection properties.
    Does the built-in Windows FTP client support secure connections? I received a request to set this up so our internal employees can share files with external customers. Many times our customers are unable to install any kind of third party software on their
    computers.
    Thanks in advance for the help.

    Hi,
    Based on my known, the built-in FTP client does not support secure connections.
    Similar thread:
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/9500d7c2-cf18-4ab1-a0cb-1e277deab33c/is-it-possible-to-connect-to-iis-75-sslrequired-ftp-site-via-windows-explorer-or-ie-?forum=winserverNIS
    If it does not help, you could ask in IIS forums as Meinolf Weber mentioned.
    Hope this helps.
    Regards.
    Vivian Wang

  • Secure zone - ERROR: The payment gateway that you are using does not support recurring payments

    So I want to sell a product that is made up of 4 downloadable products. (Totalling ~ 200meg)
    The only way I have found is to sell membership to a secure area where the files are linked.
    When I create the secure zone, I want a one-time-fee, but the system says:
    "ERROR: The payment gateway that you are using does not support recurring payments"
    The payment isn't recurring!
    Micah

    "Note that you have to use seamless gateway to process such payments."
    Right, but that's the problem, we're not usiong a seamless gateway and thus we get the error.  Again, the system should note that we're doing a one-time charge and not throw the seamless gateway error.
    Micah

  • Using Outlook for Mac; emails and calendar announcements will not send--error message: "the server does not support secure connections" Help?

    Am using Outlook calendar for Mac--needed for client connection. Invites will not go out. Error message: "server does not support secure connections." Resolution?

    I have done a similar set of things and no results.
    This is really odd, Mac Mail works other emasil clients work, just not Outlook.
    The only event I can tie it back to is the outage a couple of weeks ago when AppleID's weren't working for a perdion of time.  I ended up having to reset mine. 
    Is it feasible a local certificate got corrupted at the same or, oddly, that the SMTP servers don't have the updated password?
    What's odd is that I no matter how much i Google, i can't find anyone else who has this problem, other than here?

  • Levovo Security solution FP does not support Firefox 5

    lenovo security solution fp (password bank) does not support firefox 5. I found an addon that made by UPEK http://www.upek.com/support/customersupport/techsupport/Topic.asp?ID_Topic=82
    but it is for protector suite 2011 (which lenovo did not upgrade).  Is there a solution for that. My real intense is with fingerprint, i want to be filled password areas in web sites.
    Regards

    I have Firefox 5.0.1 and the coupon printer I'm trying to use is supported by ActiveX. It appears that 5.0.1 is not compatible with ActiveX. Can you tell me how I can access this installation to print my coupons with Firefox, please? Thanks!

  • Just changed my router to Airport. Mac  Lap top and IPad works OK except my VAIO desk computer. It says that airport does not support the setting of the computer. Check the security setting. Whar

    Just changed my router to airport extreme
    My MacBook pro and iPad work fine but my VAIO wireless  desk computer is not working.
    It says
    , the router does not support the network .check security setting.
    Which of the security setting will I change?
    Thanks for your help.

    John, thanks for the email so quickly.
    I too hope I haven't tried "everything" either but I am reasonably technical.  I had done what you suggested to do before but I did both again.
    Ethernet is yellow in the left side bar.  In the right pane it's status says Connected but then below it says "Ethernet has a self-assigned IP address and will not be able to connect to the Internet."
    I have tried the assist me menu and Network Status has Ethernet Green, Network settings Yellow, ISP Green, and Internet and Server Red and Failed for both.  I have turned things off and on, checked cables, deleted all locations and tried restting them up but to no avail.  I even disconnected everything and connected the mac directly into the cable modem itself and the thing still will not connect.
    Thoughts???

  • Apple TV 3 does not support the Microsoft Wedge Mobile Bluetooth Keyboard

    Apple TV (3. Generation) still (17.02.2013) does not support the Microsoft Wedge Mobiloe Keyboard. I bought it especially for use with Apple TV but it doesn't work. Apple TV finds the keyboard with the exact name but can not connect. No 4 digit code appears that you can type in to your keyboard to compelete the connecting process and after a few seconds "connections fails" appears.
    Now i dont't know if i should send it back to amazon to get back my money or keep it and wait until it maybe will work some day... I red from articles from beginning of january 2013 that a new Version of Apple TV is in the Pipeline (3.2) and that it has an other bluetooth chip. The same as in the iphone 5 that works with the MS wedge keyboard. So i really don't know if i should wait for the next few updates of my Apple TV or wait for a new Apple TV hardware- Update... Telephone calls with apple and microsoft doesn't brought useful results. Restore function of Apple TV doesn't work.
    I hate that Apple always brew their own soup... Bluetooth is know for an easy connection to ALL devices but Apple TV supports only a hand full of keyboards. **** S**t!!!!!!!!!!!! -.-

    Hi
    This is the solution from Microsoft website. Work fine (don´t forget press and hold Fn key!!):
    Connecting the Wedge Mobile Keyboard to a tablet PC
    By default, the Bluetooth Wedge Mobile Keyboard pairs with most tablet PCs through secure simple pairing (SSP) with a passkey. Some tablets, however, may not support SSP well with a passkey.
    In order to successfully pair your Wedge Mobile Keyboard to such a tablet, use the following alternative pairing mode.
    Pair your keyboard through SSP without a passkey
    Press and hold the Fn key at the same time as you press and hold the Connect button located under the keyboard. After 3 to 5 seconds, a small light on the top of the keyboard will blink green and red alternately. This means that your keyboard is discoverable to your tablet within 6 minutes.
    On your tablet PC, from the Start menu, select Control Panel, and in Category view, locate Hardware and Sound.
    Select Add a device.
    When the keyboard is listed, select it, and follow the instructions to successfully pair your Wedge Keyboard with your tablet.
    Note
    If you want to pair your keyboard with a tablet or other computer that supports SSP with a passkey, press and hold the Connect button only.

  • IE11/Win 8.1 error 'Your client does not support opening this list in windows explorer'

    I hoping someone might be able to help with this frustrating issue.
    I work on a project where we are using various versions of on-line SharePoint (2007/O365).  In order to quickly drag and drop folders we need to often open the document libraries by using the 'open in windows explorer view'.
    Using the same device, on occassion this works.  But often it gives a rather unhelpful message 'Your client does not support opening this list in Windows Explorer'. 
    I've searched for this issue over the net and confirm that the sites are added to the 'trusted' sites area and that the 'remember you credientials' is checked on logging in.However, the searches do not seem to apply to IE11/Win8.1 or on-line version of sharepoint
    (the suggested hot fix is not suitable)
    Only this morning, using the same device I was able, for a short while to open in explorer view, and then for no apparent reason, it began to display the error message.  I had changed nothing regarding settings or even closed the browser.
    Do you have any support/ideas/fixes on how to resolve this.
    Many thanks
    val

    Hi Val,
    sometimes an answer can be found on the internet by typing the error message from your computer into your favourite search engine.
    eg.
    http://www.bing.com/search?q=your+client+does+not+support+opening+this+list+in+windows+explorer&form=IE10TR&src=IE10TR&pc=HPNTDFJS
    see
    http://blogs.technet.com/b/asiasupp/archive/2011/06/13/error-message-quot-your-client-does-not-support-opening-this-list-with-windows-explorer-quot-when-you-try-to-quot-open-with-explorer-quot-on-a-sharepoint-document-library-in-office-365-site.aspx
    follow the directions given above.... you need to add the domains to your Intranet sites list, not the Trusted sites list.
    Perhaps you already have it mapped to your intranet zone....in which case make sure that you have unchecked "Enable Enhance Protected Mode" on the Intranet  zone dialog in Internet Options.
    If this is happening 'randomly' on client machines, then users are probably changing their internet security settings in Internet Options. Ensure they are accepting the default.... Internet Options>Security tab, click "Reset all zones to default".
    Consult with your system administrators to find out if they are applying a custom security template for the Intranet zone... It may be removing the sharepoint domains from the client Intranet zone's domains lists.
    HTH.
    Rob^_^

  • Dg4odbc to MySQL update errors: "does not support IS NULL in this context"

    I am having a problem with 'where x is null' clauses in update statements to MySQL from 11g, using dg4odbc. Updates using the clause 'where x is null' return errors like this:
    ORA-02070: database PLAZAHOST does not support IS NULL in this context
    The rejected queries never get to mysql. Furthermore, I noticed that select statements with 'where x is null' show up in the mysql query log with the where clause stripped out, although correct results are returned to SQLPlus. It looks as though 'where x is null' is stripped off by dg4odbc, which subsequently applies a secondary filter to the results received from MySQL.
    Note, both statements above work properly when issued from the MySQL client.
    Has anybody seen this? It's a big problem for me, but I can't find any references to other people having the same problem, so I assume I've got something misconfigured -- but I don't know what.
    I'm using MySQL ODBC 5.1 Driver, MySQL 5.1 Community Edition, and Oracle 11g R1 all running on a 32-bit Windows server.
    Thank you -- rick
    =============
    here's a spool of a sample oracle session:
    SQL> col descr1 for a40
    SQL> select * from t1@plazahost;
    id1 descr1
    1 hello
    2
    SQL> descr t1@plazahost
    Name Null? Type
    id1 NUMBER(10)
    descr1 VARCHAR2(255)
    SQL> select * from t1@plazahost where "descr1" is null;
    id1 descr1
    2
    SQL> update t1@plazahost set "descr1"='updated' where "descr1" is null;
    update t1@plazahost set "descr1"='updated' where "descr1" is null
    ERROR at line 1:
    ORA-02070: database PLAZAHOST does not support IS NULL in this context
    SQL> spool off
    =============
    here's the mysql query log snip for the oracle session:
    100804 10:24:20 1637 Connect     moms_oracle@MOMS_HOST on moms
              1637 Query     SET NAMES utf8
              1637 Query     SET character_set_results = NULL
              1637 Query     SET SQL_AUTO_IS_NULL = 0
              1637 Query     set autocommit=0
              1637 Query     select database()
              1637 Query     COMMIT
              1637 Query     SET SESSION TRANSACTION ISOLATION LEVEL READ COMMITTED
              1637 Query     SHOW TABLE STATUS FROM `moms` LIKE 'T1'
              1637 Query     SHOW COLUMNS FROM `moms`.`t1`
              1637 Query     SELECT `id1`,`descr1` FROM `moms`.`t1` LIMIT 0
              1637 Query     SHOW KEYS FROM `moms`.`T1`
              1637 Query     SHOW TABLE STATUS FROM `moms` LIKE 'T1'
              1637 Query     SHOW COLUMNS FROM `moms`.`t1`
              1637 Query     SELECT `id1`,`descr1` FROM `moms`.`t1` LIMIT 0
              1637 Query     SELECT A1.`id1`,A1.`descr1` FROM `T1` A1
              1637 Query     SELECT `id1`,`descr1` FROM `T1`
    100804 10:24:28 1637 Query     COMMIT
              1637 Quit     
    =============
    here's the Oracle HS trace file for the same oracle session:
    Oracle Corporation --- WEDNESDAY AUG 04 2010 10:24:19.608
    Heterogeneous Agent Release
    11.1.0.7.0
    Oracle Corporation --- WEDNESDAY AUG 04 2010 10:24:19.608
    Version 11.1.0.7.0
    Entered hgogprd
    HOSGIP for "HS_FDS_TRACE_LEVEL" returned "DEBUG"
    Entered hgosdip
    setting HS_OPEN_CURSORS to default of 50
    setting HS_FDS_RECOVERY_ACCOUNT to default of "RECOVER"
    setting HS_FDS_RECOVERY_PWD to default value
    setting HS_FDS_TRANSACTION_LOG to default of "HS_TRANSACTION_LOG"
    setting HS_FDS_TRANSACTION_ISOLATION to default of "READ_COMMITTED"
    setting HS_NLS_NCHAR to default of "UCS2"
    setting HS_FDS_TIMESTAMP_AS_DATE to default of "TRUE"
    setting HS_RPC_FETCH_REBLOCKING to default of "ON"
    setting HS_FDS_FETCH_ROWS to default of "100"
    setting HS_FDS_RESULTSET_SUPPORT to default of "FALSE"
    setting HS_FDS_PROC_IS_FUNC to default of "FALSE"
    setting HS_FDS_CHARACTER_SEMANTICS to default of "FALSE"
    setting HS_FDS_MAP_NCHAR to default of "TRUE"
    setting HS_NLS_DATE_FORMAT to default of "YYYY-MM-DD HH24:MI:SS"
    setting HS_FDS_REPORT_REAL_AS_DOUBLE to default of "FALSE"
    setting HS_LONG_PIECE_TRANSFER_SIZE to default of "65536"
    setting HS_SQL_HANDLE_STMT_REUSE to default of "FALSE"
    setting HS_FDS_QUERY_DRIVER to default of "TRUE"
    setting HS_FDS_SUPPORT_STATISTICS to default of "TRUE"
    Parameter HS_FDS_QUOTE_IDENTIFIER is not set
    setting HS_CALL_NAME_ISP to "gtw$:SQLTables;gtw$:SQLColumns;gtw$:SQLPrimaryKeys;gtw$:SQLForeignKeys;gtw$:SQLProcedures;gtw$:SQLStatistics"
    Exiting hgosdip, rc=0
    ORACLE_SID is "plazahost"
    Product-Info:
    Port Rls/Upd:7/0 PrdStat:0
    Agent:Oracle Database Gateway for ODBC
    Facility:hsa
    Class:ODBC, ClassVsn:11.1.0.7.0_0006, Instance:plazahost
    Exiting hgogprd, rc=0
    Entered hgoinit
    HOCXU_COMP_CSET=1
    HOCXU_DRV_CSET=178
    HOCXU_DRV_NCHAR=1000
    HOCXU_DB_CSET=178
    HOCXU_SEM_VER=110000
    Entered hgolofn at 2010/08/04-10:24:19
    Exiting hgolofn, rc=0 at 2010/08/04-10:24:20
    HOSGIP for "HS_OPEN_CURSORS" returned "50"
    HOSGIP for "HS_FDS_FETCH_ROWS" returned "100"
    HOSGIP for "HS_LONG_PIECE_TRANSFER_SIZE" returned "65536"
    HOSGIP for "HS_NLS_NUMERIC_CHARACTER" returned ".,"
    Exiting hgoinit, rc=0 at 2010/08/04-10:24:20
    Entered hgolgon at 2010/08/04-10:24:20
    reco:0, name:moms_oracle, tflag:0
    Entered hgosuec at 2010/08/04-10:24:20
    Exiting hgosuec, rc=0 at 2010/08/04-10:24:20
    HOSGIP for "HS_FDS_RECOVERY_ACCOUNT" returned "RECOVER"
    HOSGIP for "HS_FDS_TRANSACTION_LOG" returned ""HS_TRANSACTION_LOG""
    HOSGIP for "HS_FDS_TIMESTAMP_AS_DATE" returned "TRUE"
    HOSGIP for "HS_FDS_CHARACTER_SEMANTICS" returned "FALSE"
    HOSGIP for "HS_FDS_MAP_NCHAR" returned "TRUE"
    HOSGIP for "HS_FDS_RESULT_SET_SUPPORT" returned "FALSE"
    HOSGIP for "HS_FDS_PROC_IS_FUNC" returned "FALSE"
    HOSGIP for "HS_FDS_REPORT_REAL_AS_DOUBLE" returned "FALSE"
    using moms_oracle as default value for "HS_FDS_DEFAULT_OWNER"
    HOSGIP for "HS_SQL_HANDLE_STMT_REUSE" returned "FALSE"
    Entered hgocont at 2010/08/04-10:24:20
    HS_FDS_CONNECT_INFO = "momsPlazaHost"
    RC=-1 from HOSGIP for "HS_FDS_CONNECT_STRING"
    Entered hgogenconstr at 2010/08/04-10:24:20
    dsn:momsPlazaHost, name:moms_oracle
    optn:
    ##>Connect Parameters (len=43)<##
    ## DSN=momsPlazaHost;
    #! UID=moms_oracle;
    #! PWD=*
    Exiting hgogenconstr, rc=0 at 2010/08/04-10:24:20
    DriverName:myodbc5.dll, DriverVer:05.01.0005
    DBMS Name:MySQL, DBMS Version:5.1.35-community-log
    Exiting hgocont, rc=0 at 2010/08/04-10:24:20
    SQLGetInfo returns Y for SQL_CATALOG_NAME
    SQLGetInfo returns 64 for SQL_MAX_CATALOG_NAME_LEN
    Exiting hgolgon, rc=0 at 2010/08/04-10:24:20
    Entered hgoulcp at 2010/08/04-10:24:20
    Entered hgowlst at 2010/08/04-10:24:20
    Exiting hgowlst, rc=0 at 2010/08/04-10:24:20
    SQLGetInfo returns ` for SQL_IDENTIFIER_QUOTE_CHAR
    SQLGetInfo returns Y for SQL_COLUMN_ALIAS
    2 instance capabilities will be uploaded
    capno:1991, context:0x0001ffff, add-info: 0
    capno:1992, context:0x0001ffff, add-info: 1, translation:"`"
    Exiting hgoulcp, rc=0 at 2010/08/04-10:24:20
    Entered hgouldt at 2010/08/04-10:24:20
    0 instance DD translations were uploaded
    Exiting hgouldt, rc=0 at 2010/08/04-10:24:20
    Entered hgobegn at 2010/08/04-10:24:20
    tflag:0 , initial:1
    hoi:0x12f03c, ttid (len 26) is ...
    00: 4D4F4D53 44422E38 62393537 3032392E [MOMSDB.8b957029.]
    10: 322E3130 2E333131 3531 [2.10.31151]
    tbid (len 23) is ...
    00: 4D4F4D53 44425B32 2E31302E 33313135 [MOMSDB[2.10.3115]
    10: 315D5B31 2E345D [1][1.4]]
    TXN Capable:3, Isolation Option:0xf
    Exiting hgobegn, rc=0 at 2010/08/04-10:24:20
    Entered hgodtab at 2010/08/04-10:24:20
    count:1
    table: T1
    Entered hgopcda at 2010/08/04-10:24:20
    Column:1(id1): dtype:4 (INTEGER), prc/scl:10/0, nullbl:1, octet:0, sign:1, radix:10
    Exiting hgopcda, rc=0 at 2010/08/04-10:24:20
    Entered hgopcda at 2010/08/04-10:24:20
    Column:2(descr1): dtype:12 (VARCHAR), prc/scl:255/0, nullbl:1, octet:255, sign:1, radix:10
    Exiting hgopcda, rc=0 at 2010/08/04-10:24:20
    The hoada for table T1 follows...
    hgodtab, line 651: Printing hoada @ 02A32DDC
    MAX:2, ACTUAL:2, BRC:1, WHT=6 (TABLE_DESCRIBE)
    DTY NULL-OK LEN MAXBUFLEN PR/SC CST IND MOD NAME
    4 INTEGER Y 4 4 0/ 0 0 0 0 id1
    12 VARCHAR Y 255 255 0/ 0 0 0 0 descr1
    Exiting hgodtab, rc=0 at 2010/08/04-10:24:20
    Entered hgodafr, cursor id 0 at 2010/08/04-10:24:20
    Exiting hgodafr, rc=0 at 2010/08/04-10:24:20
    Entered hgotcis at 2010/08/04-10:24:20
    Calling SQLStatistics for T1
    Calling SQLColumns for moms_oracle.T1
    Column "id1": dtype=4, colsize=10, decdig=0, char_octet_length=0, cumulative avg row len=4
    Column "descr1": dtype=12, colsize=255, decdig=0, char_octet_length=255, cumulative avg row len=195
    Exiting hgotcis, rc=0 at 2010/08/04-10:24:20
    Entered hgopars, cursor id 1 at 2010/08/04-10:24:20
    type:0
    SQL text from hgopars, id=1, len=40 ...
    00: 53454C45 43542041 312E6069 6431602C [SELECT A1.`id1`,]
    10: 41312E60 64657363 72316020 46524F4D [A1.`descr1` FROM]
    20: 20605431 60204131 [ `T1` A1]
    Exiting hgopars, rc=0 at 2010/08/04-10:24:20
    Entered hgoopen, cursor id 1 at 2010/08/04-10:24:20
    hgoopen, line 83: NO hoada to print
    Exiting hgoopen, rc=0 at 2010/08/04-10:24:20
    Entered hgodscr, cursor id 1 at 2010/08/04-10:24:20
    Entered hgopcda at 2010/08/04-10:24:20
    Column:1(id1): dtype:4 (INTEGER), prc/scl:10/0, nullbl:1, octet:0, sign:1, radix:0
    Exiting hgopcda, rc=0 at 2010/08/04-10:24:20
    Entered hgopcda at 2010/08/04-10:24:20
    Column:2(descr1): dtype:12 (VARCHAR), prc/scl:255/0, nullbl:1, octet:256, sign:1, radix:0
    Exiting hgopcda, rc=0 at 2010/08/04-10:24:20
    hgodscr, line 506: Printing hoada @ 02A32DDC
    MAX:2, ACTUAL:2, BRC:100, WHT=5 (SELECT_LIST)
    DTY NULL-OK LEN MAXBUFLEN PR/SC CST IND MOD NAME
    4 INTEGER Y 4 4 0/ 0 0 0 0 id1
    12 VARCHAR Y 256 256 0/ 0 0 0 0 descr1
    Exiting hgodscr, rc=0 at 2010/08/04-10:24:21
    Entered hgoftch, cursor id 1 at 2010/08/04-10:24:21
    hgoftch, line 117: Printing hoada @ 02A32DDC
    MAX:2, ACTUAL:2, BRC:100, WHT=5 (SELECT_LIST)
    DTY NULL-OK LEN MAXBUFLEN PR/SC CST IND MOD NAME
    4 INTEGER Y 4 4 0/ 0 0 0 0 id1
    12 VARCHAR Y 256 256 0/ 0 0 0 0 descr1
    SQLBindCol: column 1, cdatatype: -16, bflsz: 4
    SQLBindCol: column 2, cdatatype: 1, bflsz: 257
    2 rows fetched
    Exiting hgoftch, rc=0 at 2010/08/04-10:24:21
    Entered hgoftch, cursor id 1 at 2010/08/04-10:24:21
    hgoftch, line 117: Printing hoada @ 02A32DDC
    MAX:2, ACTUAL:2, BRC:2, WHT=5 (SELECT_LIST)
    DTY NULL-OK LEN MAXBUFLEN PR/SC CST IND MOD NAME
    4 INTEGER Y 4 4 0/ 0 0 0 0 id1
    12 VARCHAR Y 5 256 0/ 0 0 0 0 descr1
    0 rows fetched
    Exiting hgoftch, rc=1403 at 2010/08/04-10:24:21
    Entered hgoclse, cursor id 1 at 2010/08/04-10:24:23
    Exiting hgoclse, rc=0 at 2010/08/04-10:24:23
    Entered hgodafr, cursor id 1 at 2010/08/04-10:24:23
    Exiting hgodafr, rc=0 at 2010/08/04-10:24:23
    Entered hgopars, cursor id 1 at 2010/08/04-10:24:23
    type:0
    SQL text from hgopars, id=1, len=31 ...
    00: 53454C45 43542060 69643160 2C606465 [SELECT `id1`,`de]
    10: 73637231 60204652 4F4D2060 543160 [scr1` FROM `T1`]
    Exiting hgopars, rc=0 at 2010/08/04-10:24:23
    Entered hgoopen, cursor id 1 at 2010/08/04-10:24:23
    hgoopen, line 83: NO hoada to print
    Exiting hgoopen, rc=0 at 2010/08/04-10:24:23
    Entered hgodscr, cursor id 1 at 2010/08/04-10:24:23
    Entered hgopcda at 2010/08/04-10:24:23
    Column:1(id1): dtype:4 (INTEGER), prc/scl:10/0, nullbl:1, octet:0, sign:1, radix:0
    Exiting hgopcda, rc=0 at 2010/08/04-10:24:23
    Entered hgopcda at 2010/08/04-10:24:23
    Column:2(descr1): dtype:12 (VARCHAR), prc/scl:255/0, nullbl:1, octet:256, sign:1, radix:0
    Exiting hgopcda, rc=0 at 2010/08/04-10:24:23
    hgodscr, line 506: Printing hoada @ 02A32DDC
    MAX:2, ACTUAL:2, BRC:100, WHT=5 (SELECT_LIST)
    DTY NULL-OK LEN MAXBUFLEN PR/SC CST IND MOD NAME
    4 INTEGER Y 4 4 0/ 0 0 0 0 id1
    12 VARCHAR Y 256 256 0/ 0 0 0 0 descr1
    Exiting hgodscr, rc=0 at 2010/08/04-10:24:24
    Entered hgoftch, cursor id 1 at 2010/08/04-10:24:24
    hgoftch, line 117: Printing hoada @ 02A32DDC
    MAX:2, ACTUAL:2, BRC:100, WHT=5 (SELECT_LIST)
    DTY NULL-OK LEN MAXBUFLEN PR/SC CST IND MOD NAME
    4 INTEGER Y 4 4 0/ 0 0 0 0 id1
    12 VARCHAR Y 256 256 0/ 0 0 0 0 descr1
    SQLBindCol: column 1, cdatatype: -16, bflsz: 4
    SQLBindCol: column 2, cdatatype: 1, bflsz: 257
    2 rows fetched
    Exiting hgoftch, rc=0 at 2010/08/04-10:24:24
    Entered hgoftch, cursor id 1 at 2010/08/04-10:24:24
    hgoftch, line 117: Printing hoada @ 02A32DDC
    MAX:2, ACTUAL:2, BRC:2, WHT=5 (SELECT_LIST)
    DTY NULL-OK LEN MAXBUFLEN PR/SC CST IND MOD NAME
    4 INTEGER Y 4 4 0/ 0 0 0 0 id1
    12 VARCHAR Y 5 256 0/ 0 0 0 0 descr1
    0 rows fetched
    Exiting hgoftch, rc=1403 at 2010/08/04-10:24:24
    Entered hgoclse, cursor id 1 at 2010/08/04-10:24:27
    Exiting hgoclse, rc=0 at 2010/08/04-10:24:27
    Entered hgodafr, cursor id 1 at 2010/08/04-10:24:27
    Exiting hgodafr, rc=0 at 2010/08/04-10:24:27
    Entered hgocomm at 2010/08/04-10:24:28
    keepinfo:0, tflag:1
    00: 4D4F4D53 44422E38 62393537 3032392E [MOMSDB.8b957029.]
    10: 322E3130 2E333131 3531 [2.10.31151]
    tbid (len 23) is ...
    00: 4D4F4D53 44425B32 2E31302E 33313135 [MOMSDB[2.10.3115]
    10: 315D5B31 2E345D [1][1.4]]
    cmt(0):
    Entered hgocpctx at 2010/08/04-10:24:28
    Exiting hgocpctx, rc=0 at 2010/08/04-10:24:28
    Exiting hgocomm, rc=0 at 2010/08/04-10:24:28
    Entered hgolgof at 2010/08/04-10:24:28
    tflag:1
    Exiting hgolgof, rc=0 at 2010/08/04-10:24:28
    Entered hgoexit at 2010/08/04-10:24:28
    Exiting hgoexit, rc=0 at 2010/08/04-10:24:28

    is null statement is post processed. This means in case of a select ALL records from the remote database are fetched into the Oracle database and the is null statement is then processed locally in the Oracle db.
    So thze select will work as it is handled internally in the Oracle database. This also means as But "is null" isn't sent to the foreign MySQL db the update clause will fail with ORA-02070: database PLAZAHOST does not support IS NULL in this context
    You need to recode the statement or use passthrough statements.

Maybe you are looking for