Does DV4T 5100 supports 1600 mhz RAM?

I'm about to purchase the DV4T 5100 (i7Q, 650m) with the 4GB DDR3 RAM.
I was chatting with a sales representative about the RAM speed and she told me that it is only 1333 mhz.
Does the DV4T 5100 supports 1600 mhz RAM?
This question was solved.
View Solution.

Run can run this utility from Crucial and it will tell you for sure.
http://www.crucial.com/systemscanner/
Generally speaking though it won't make use of the 1600Mhz RAM, you can install it, but it may not make the laptop run any faster.

Similar Messages

Flash won't install after downloading...early 2013 MBP/Retina, 8GB DDR3 1600 MHz Ram, 3GHz Intel Core i7 Processor (clean installation)

Flash Player won’t install after downloading
On the first attempt to install v14, Flash Player v13 was installed and working fine.
I opened the installation package for the new Flash Player, followed standard protocol for installing Mac software and it hung before retrieving anything.
Subsequently, while watching the beach ball spin, I got an error message that the installer could not retrieve the v13 Flash Player software.
So I uninstalled Flash Player 13 and again attempted to install v14, only to see the spinning beach ball followed by a message that the installer could not retrieve the v14 Flash Player software.
I am running OS X v10.9.4 on an early 2013 MBP/Retina display with 3GHz Intel Core i7 processor and 8GB DDR3 1600 MHz Ram.
If you have any ideas or suggestions regarding my issue, please let me know.
Sincerely.
JWH

Try un-installing and then re-installing via the web site.
Adobe Flash Uninstaller
Adobe Flash Player

Can a W500 support 1600 Ghz ram or is it limited to 1066 Ghz

Have a W500 4058CTO 2.3 Ghz Thinkpad with 64 bit Windows OS. Want to upgrade to 8GB ram.
The specs say to install 1066 Ghz SODIMM ram.
Will 1600 Ghz ram operate correctly without causing errors and freezes in the W500?
Will it give a performance improvement over the 1066 Ram?
What brands are best used in the W500?
Solved!
Go to Solution.

Here it is: http://www.ebay.com/itm/CORSAIR-Vengeance-8GB-2-x-4GB-204-Pin-DDR3-1600MHz-PC3-12800-Laptop-Memory-/...
Or in one stick: http://www.ebay.com/itm/Corsair-Vengeance-1x8GB-8-16-32-GB-204-Pin-DDR3-SO-DIMM-1600-12800-Laptop-Me...
Not sure that the W500 can support 8 GB on one stick but it does support 3 4 GB sticks.
My question from someone who has tried it is does it work? What about on 1 stick?

Dv7-6b01er laptop with 1600 mhz ram

Hello, I have a laptop dv7-6b01er with AMD A6-3410mx and 1333mhz ram. It supports 1600mhz ram ? Let us say CMSX4GX3M1A1600C9
This question was solved.
View Solution.

Hi:
Below is the link to the service manual for your notebook.
http://h10032.www1.hp.com/ctg/Manual/c03043778.pdf
Memory info can be found in Chapter 1 on pages 4 and 5.
Max for AMD notebooks is 2 x 4 GB of PC3-10600 memory (1333 MHz).
You may be able to install PC3-12800 (1600 MHz) memory in your model, but it will only run at 1333 MHz.

Kingston 1600 mhz Ram Reading only 1333 Mhz Help?

My system is a pavilion G6 with the A6 AmD Processor. HP says it can go to 8GB Ram to 1600 mhz. I tried everything and CPU-Z says only 667 x2. It should be 800x2 Any ideas. Reccomendations Thanks

15 views, no answers? Come on guys.

Will 1333 MHz RAM work in a 27" 2012 Intel 3.2 iMac?

I've got a 27" 2012 Intel iMac 3.2 Ghz - got 4 Gig of Corsair DDR3 laptop RAM that appears to be compatible but it's 1333 MHz instead of 1600 MHz. I'm assuming it would work but would drop the overall memory speed to 1333 MHz from 1600MHz. Or should I put down the bong and get the compatible 1600 MHz RAM from OWC/Crucial?

It will likely work, but how reliably is a question mark. The memory bus would run slower and reduce performance.
Get the spec'd memory for the computer. You might as well spend the money now then have to spend even more later.
Use OWC or Crucial, if you wish. I usually go with DataMem. But it really doesn't make any difference.

Difference between 1333 and 1600 mhz for 16Go RAM

Is there a big difference between a 1333 and 1600 mhz 16Go RAM and does my macbook pro 13" (2,9GHz intel core i7 - actually on 8Go RAM - 2011) support those?
Is this one ok for my mac? : http://www.amazon.fr/memory-upgrades-1333Mhz-MacbookPros-laptops/dp/B006FW8RCU/r ef=sr_1_2?ie=UTF8&qid=1382738058&sr=8-2&keywords=Mémoire+16+Go+%282+x+8+Go%29+SO DIMM+1333+MHz+DDR3+PC3-10600
Thanks,
T.Dehon

1333 MHz RAM for your machine. Don't use anything else but what is recommended.
Maximum Memory
16 GB (Actual) 8 GB (Apple)
Memory Slots
2 - 204-pin PC-10600 (1333 MHz) DDR3 SO-DIMM

Does Satellite A200-1GB(PSAE6E) supports 4GB of RAM

I have a toshiba Satellite A200-1GB and I want to put 4GB of RAM on it.
It came with 2GB of pc2-5300 RAM.
Does it supports pc2-6400 RAM modules?
Regards

I called Toshiba about this after I bought a Satellite A205 with 2GB factory installed. The salesman where I bought it told me that if I boosted the RAM to 4GB it would run Photoshop even with Vista. yeah right. Vista soaks almost up a full GB just sunning its self. I literally bought this unit on the way to the airport leaving for China with the extra 2x2GB chips in a bag. Needless to say after I installed the 4GB it won't start.
The Toshiba guys tell me that it is limited not by the OS but by the Motherboard.
Has anyone tried changing the BIOS chip?
When I asked why they would put such a limitation on the box they thought I was strange to want 4GB of RAM. Telling me that it isn't really considered the way to go for PSing. I guess they have never heard of Gamming. Or maybe they think someone would want to go bouncing around the 3rd world with a $3000 box to be lost.

My Macbook pro is very slow in oening folders, it does not open immediatly as you would expect and takes about 30s or more. Please help! Here is the spec: OS X 10.8.3 2,3 Gz Intel Core i7 8GB 1600 MHz DDR3

My Macbook pro is very slow in oening folders, it does not open immediatly as you would expect and takes about 30s or more. Please help!
Here is the spec:
OS X 10.8.3
2,3 Gz Intel Core i7
8GB 1600 MHz DDR3

Did u try to rebuild spotlight index? repair permissions? verify disk and repair if needed?
if now, try it out.

Upgrade Ram 4GB DDR3 -1600 MHz

HI Friends
I am using HP G62-361TX Laptop , can i upgarde RAM to 4GB DDR3 with 1600 MHz
This question was solved.
View Solution.

@ramkutti
as Paul has said if the module is backward compatible there is no issue in putting a 1333 or even 1600 except that it's mere waste of money , that's all , with no improvement in performance. so put two 2GB DDR3 1066MHz RAM in the two slots which can act as dual channel than one 4GB direct single channel upgrade.
thanks
visruth
++Please click KUDOS / White thumb to say thanks
++Please click ACCEPT AS SOLUTION to help others, find this solution faster
**I'm a Volunteer, I do not work for HP**

Why does my 2012 macbook pro 4gb ram run slow sometimes?

I've purchased my 2012 4gb ram Macbook ram w/ 500 gb hard drive around September. It started off extremely fast the first 4 months (when I had mavericks), but there we're problems with the Video playback towards the last 4 months (It would Freeze and unfreeze & the the audio-video sync would be way off after 30 mins of netflix, which would cause the whole computer to slow down). So, I installed the Yosemite update, which made it even worse to the point where my macbook was unusable. With yosemite, I'd have an average of 500mb ram free memory available, sometimes even lower. Now, I did a manual restore to OS X 10.8.5 Mountain Lion, and I see the major difference in speed. I could use safari now & get an average of 1.47 gb of free ram available (with just the safari application open). Now, the video playback issue still occurs sometimes & having about 4 programs open does make the computer slower than usual, but not as often. I'm hoping this is just a ram issue, becuase I'm expecting on upgrading my ram to a 16gb ram or higher while still on Mountain Lion just to be able to run Logic Pro & Adobe Premiere in the near future. If its not a ram issue which is causing this problem on my macbook, I'd be ****** because I'd be spending almost $200 on a ram upgrade and it not resolving this issue would kill me. Could someone help? Ill even take a Diagnose test like Etrecheck if you need me to. Thanks.

Hello, you had me lost on what you explained. But, here's my Etrecheck report. Thanks.
EtreCheck version: 2.1.8 (121)
Report generated March 10, 2015 12:38:17 PM EDT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    MacBook Pro (13-inch, Mid 2012) (Technical Specifications)
    MacBook Pro - model: MacBookPro9,2
    1 2.5 GHz Intel Core i5 CPU: 2-core
    4 GB RAM
        BANK 0/DIMM0
            2 GB DDR3 1600 MHz ok
        BANK 1/DIMM0
            2 GB DDR3 1600 MHz ok
    Bluetooth: Good - Handoff/Airdrop2 supported
    Wireless: en1: 802.11 a/b/g/n
    Battery Health: Normal - Cycle count 343
Video Information: ℹ️
    Intel HD Graphics 4000 - VRAM: 512 MB
        Color LCD 1280 x 800
System Software: ℹ️
    OS X 10.8.5 (12F45) - Time since boot: 5 days 10:0:0
Disk Information: ℹ️
    APPLE HDD HTS547550A9E384 disk0 : (500.11 GB)
        disk0s1 (disk0s1) <not mounted> : 210 MB
        Untitled (disk0s2) / : 499.25 GB (479.98 GB free)
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
    MATSHITADVD-R   UJ-8A8
USB Information: ℹ️
    Apple Inc. Apple Internal Keyboard / Trackpad
    Apple Inc. BRCM20702 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Computer, Inc. IR Receiver
    Apple Inc. FaceTime HD Camera (Built-in)
Thunderbolt Information: ℹ️
    Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
    Anywhere
Kernel Extensions: ℹ️
        /System/Library/Extensions
    [loaded]    com.globaldelight.driver.BoomDevice (1.1) [Click for support]
Problem System Launch Agents: ℹ️
    [failed]    com.apple.accountsd.plist
    [failed]    com.apple.coreservices.appleid.authentication.plist
    [failed]    com.apple.gamed.plist
    [failed]    com.apple.printtool.agent.plist
    [failed]    com.apple.rcd.plist
Problem System Launch Daemons: ℹ️
    [failed]    com.apple.coreservices.appleid.passwordcheck.plist
    [failed]    com.apple.findmymac.plist
    [failed]    com.apple.wdhelper.plist
Launch Daemons: ℹ️
    [loaded]    com.adobe.fpsaud.plist [Click for support]
    [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
User Login Items: ℹ️
    iTunesHelper    Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Internet Plug-ins: ℹ️
    FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
    Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
    QuickTime Plugin: Version: 7.7.1
    JavaAppletPlugin: Version: 14.6.0 - SDK 10.8 Check version
    SharePointBrowserPlugin: Version: 14.4.8 - SDK 10.6 [Click for support]
Safari Extensions: ℹ️
    AdBlock
3rd Party Preference Panes: ℹ️
    Flash Player [Click for support]
Time Machine: ℹ️
    Time Machine not configured!
Top Processes by CPU: ℹ️
        19%    WebProcess
         7%    Safari
         5%    WindowServer
         4%    Boom
         4%    mds
Top Processes by Memory: ℹ️
    994 MB    WebProcess
    343 MB    Safari
    43 MB    WindowServer
    34 MB    mds
    26 MB    Dock
Virtual Memory Information: ℹ️
    905 MB    Free RAM
    1.37 GB    Active RAM
    796 MB    Inactive RAM
    1.22 GB    Wired RAM
    5.11 GB    Page-ins
    6.51 GB    Page-outs

Satellite L70-A-11C does not power on after 4GB RAM upgrade

Hello,
I wanted to add 4GB RAM and I've taken a DDR3 1600 MHz SoDimm from Corsair.
When the RAM is plugged alone or with the original RAM, the laptop does no start at all!
I tested this RAM with a other laptop and the RAM works perfectly.
I suppose that only the DDR3L type (1.35V) is accepted and not the DDR3 (1.5 V). Can you confirm?
Do you recommend a specific brand or a type of DDR3L which is for sure compatible with the Satellite L70-A-11C?
Thx in advance
CortX

Hi
As far as I know the compatible 4G RAM module from Toshiba has the part number +PA5104U-1M4G+
The Toshiba PA5104U-1M4G module is exactly the same like the module from Kingston +KTT-S3CL/4G+
The Kingston KTT-S3CL/4G supports *1.35V* and therefore I assume that you have to use the modules supporting the 1.35V and the 1.5V modules would cause the mentioned problems.
Hope this would help you to get the right RAM module.

Can B75MA-E33 run 1600 mhz ddr3?

Hey guys,
I want to know if B75MA-E33 can run 1600 mhz ddr3 memory, because some people say they can and some say they can't

I have used this board quite a few times. Very nice for the money. It is designed to install non-k cpu's and ram matching the cpu specs. With this board, the typical set up is an office computer or the like so you would just enter bios hit f6 for optimized defaults then install your OS.
Main Memory
• Memory speed support up to 1333MHz are provided on 2nd Gen Intel® Core™ i7 / Core™ i5 / Core™ i3 / Pentium® / Celeron® processors (codename Sandy Bridge, 32nm)
• Memory speed support up to 1600MHz are provided on 3rd Gen Intel® Core™ i7 / Core™ i5 / Core™ i3 / Pentium® / Celeron® processors (codename Ivy Bridge, 22nm)
• Memory speed support beyond 1600MHz are provided on some 3rd Generation Intel Core i7-3770K CPUs. This will vary based on quality of CPU.
• Support up to 16GB of system memory*
* Due to a Windows 32-bit operating system limitation, when more than 4 GB of physical memory is installed, the actual memory size displayed will be less than the size of the physical memory installed.
• Support Dual-Channel mode

Ddr3 1600 mhz on p35 neo combo

Hi all,
I have bought kingston 1,65 1600 speed RAM, but i only I only get black screen at start up, 1x2 gb. I can't up voltage in BIOS on ddr3 RAM as I can't boot. I run ddr 2 no myw. Can I somehow make it work? My psu is 650 watt

Quote
I know my motherboard only supports up to pc-10600(1333)
Actually, the P35 chipset does not support more than DDR3-1066.
Quote
take a look at this link:
Yeah, well, the fact that those modules work for that user does not mean that different modules will work for you. The native maximum is DDR3-1066. When you go for DDR3-1600 in spite of the specification limitation, then you are gambling. It will either work or it won't. In your case it obviously doesn't work.

HP Pavilion dv4t-5100 CTO Entertainment Notebook PC Graphic Card Replacement

Hello all,
I have, as listed in the subject, an HP Pavilion dv4t-5100 CTO Entertainment Notebook PC, and I had a few questions about it. First off, I bought it 2-3 years ago and the NVIDIA graphics card it came with has broken, and by broken I mean it doesn't function the way a working card would. To get into detail, it is a NVIDIA GEFORCE GT 630M 1GB, and there are updates for it, however, when I try to update, I experience the following, I can download the update just fine but when I go to restart to install the update is when I have problems. As my laptop starts up again, it crashes and I have to do a System Restore. Thus, I consider it to be broken.
So, I wish for help from the HP Community.
I wish to know if I can purchase a replacement to me installed on my laptop to get another 630M put in or if better yet, I can instead upgrade to a newer NVIDIA graphics card without having to buy a whole new laptop.
Please help,
Sincerely --RareFindsYou

RareFindsYou wrote:
Hello all,
I have, as listed in the subject, an HP Pavilion dv4t-5100 CTO Entertainment Notebook PC, and I had a few questions about it. First off, I bought it 2-3 years ago and the NVIDIA graphics card it came with has broken, and by broken I mean it doesn't function the way a working card would. To get into detail, it is a NVIDIA GEFORCE GT 630M 1GB, and there are updates for it, however, when I try to update, I experience the following, I can download the update just fine but when I go to restart to install the update is when I have problems. As my laptop starts up again, it crashes and I have to do a System Restore. Thus, I consider it to be broken.
So, I wish for help from the HP Community.
I wish to know if I can purchase a replacement to me installed on my laptop to get another 630M put in or if better yet, I can instead upgrade to a newer NVIDIA graphics card without having to buy a whole new laptop.
Please help,
Sincerely --RareFindsYou
For your case of a dead GPU your only choice is to replace the board with same matching board with the GPU fixed. Otherwise if there is a eBay seller that does GPU repair is the only other way to fix the dead GPU problem. I doubt being 2-3 yrs old HP would repair or fix your dead GPU and if they do they would mostly likely swap the board with another board hopefully with the GPU fixed.
I am a Volunteer to help others on here-not a HP employee.
Replies aren't online 24/7 because of Time Zone differences.
Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

Does DV4T 5100 supports 1600 mhz RAM?

Similar Messages

Maybe you are looking for