Does DVD Studio Pro 4 Work In Mountain Lion OS 10.8.3 ?

I have an older version of "DVD Studio Pro 4" which I have never installed, an would be curious to know if it will run on OSX 10.8.3 (Mountain LIon)? I have a new 2013 iMac that I am loading up with software, and would like to consider loading the "DVD Studio Pro 4".
I'd also be interested in knowing of any DVD Studio Pro 4 updates (if any) and where to get them, including the 4.0.2 update ... as, unfortunately the Apple site has dropped update support for this program.
Anyone have any knowledge on this?

Russ:
Well, evidently "DVD Studio Pro 4" won't install on an Intel iMac.
Attached (below) is a "screen grab" of the unexpected pop-up window I was first presented with, when I tried to use the DVD Studio Pro 4 Installer .mpkg.
DVD Studio Pro 4
Minimum Hardware Requirements
• A Macintosh computer with a 733 megahertz (MHz) or faster
   PowerPC G4 or G5 processor (G5 required for HD authoring
   and playback)
• 8 megabytes (MB) of video memory (32 MB recommended)
• 512 MB of RAM (1 GB required for HD)
• AGP Quartz Extreme graphics card
DVD Studio Pro 4
Minimum Software Requirements
• Mac OS X v10.3.9 or later
• QuickTime 7.0 or later
Nuts! I really wanted to install and use this application.
PS: Just curious Russ .... how are you able to run "DVD Studio Pro 4" on your MBP with 10.7? Is the MBP Intel? Can you tell me the "version" of "DVD Studio Pro 4" that you have installed?
Was there an Intel version made of "DVD Studio Pro 4" that I don't know about?

Similar Messages

Video won't play in DVD Studio Pro, works in QT

I cannot get a m2v file to work in DVD studio pro. I compressed to Best Quality 120 min from FCP and opened up the DVD studio file and inserted both the m2v and ac3 files from Compression when it was finished. I can hear the audio but the video is just black. The video plays in the finder and in Quicktime Pro. I saved these two compression files over previous files because I was just updating the video and wanted to use the same DVD studio pro file I had already designed. I am re-compressing as I type this but if it still doesn't work I am at a loss of what to do!

Does the m2v asset preview in DVDSP? If it does you may need to rebuild the track that it's in.

Why does dvd studio Pro all of a sudden want my serial number?

Using DVDSP 4.2.1. This has been stable on my Mac Pro for many years now. The file importer got confused somehow and even Activity Monitor had trouble force quitting.
I repaired permissions and rebooted and all seemed fine. Now about every 3 or 4 times I start DVDSP it'a asking for me to put in my identifying info, including the SN.. I've got the SN, but I don't feel all warm and fuzzy about this. Does anyone know what has happened and how I can be sure things are not going to lock me out when I need to keep going on a project?

I have had this problem occur rather often. Not sure which OS you are running. A couple of things, after entering the number, close it out and open the older version of Motion (the one from the Studio and install discs, not the new one if you purchased through app store.)
Then either launch DVD Studio Pro via going into the App Folder and open a project that way OR close out DVD SP and click a DVD SP project to open it. Yeah, it sounds weird. On one of my computers following one of those seems to have cut down the asking for a serial number a lot, while on another computer the second version seems to work. I have not tracked down where the problem came from yet, but I had the same thing - stable for years. And I do not recall even doing any updates because once I have computers working, I leave them alone unless needed. I am guessing I probably loaded a driver or something.....

Switch off screen while DVD Studio Pro works

I want to encode a DVD overnight with my iMac G5 but somehow DVD Studio Pro seems to override the energy settings.
Even though the display is set to turn off after 1 minute it doen't... ever...
The great shortcut I have found in this forum Option Apple Eject puts the whole computer in sleep, not just the screen. At least my DVD encoding was stuck at 11% for the hour I tried this.
The script I have found in this forum which sets energy save to 1 minute does not help either, as energy save does not work with DVD Studio Pro...
How can I solve this problem.
Thanks
Whodany

a partial fix, however, is to set the program to background encode, then i think you could just leave the program idling overnight with no problems with the power saving, and it should have encoded enouth overnight to make burning nice and quick in the morning
IBook G4, iMac G5 (iSight) Mac OS X (10.4.7)

Output Audio from DVD Studio Pro works on some DVD's but not others

Hello All,
Would really appreciate any help here.
My project in final cut pro 6 has audio and it plays fine on the computer as well as the dvd studio pro simulator. I send the final cut pro file to compressor and then to dvdsp to burn. Everything works fine except when I play it in some dvd players I get no sound. I have another dvd player that plays everything with no problem. This is a big problem as I can't determine what kind of player a client has.
Is there something I need to fix in final cut pro, compressor or dvdsp?
Thanks a bunch in advance for any help anyone can provide.
Please help. Thanks

Hi
What audio format did you use: AIFF or AC3?
Alberto

Does DVD Studio Pro max out at 100 chapters?

I have been told that 100 chapters is the most you can have in a DVD Studio Pro project. Does anyone know if this is true? Thanks in advance for your input and your time.

If I'm adding a slideshow to my project and have 180 photos I assume I need to create 2 slideshows? Each photo is a chapter when you convert it to a track.
I'm new to DVD Studio Pro and none of my menu photos or slideshow photos appear in the Viewer. Why can't I see the photos? They appear in the Menu, Assets and Slideshow column but don't appear in the Viewer or Simulator. I'm obviously missing s step somewhere. I only do slideshows because I'm a still photographer. I'm moving from iMovieHD and iDVD to DVD Studio Pro 3. My photos are 300dpi and 3000x2400 which is not 4:3 ratio. I need to recrop for DVD.
Any suggestions (read the manual)? I did buy DVD Studio Pro - 101: Mastering DVD Studio Pro but it doesn't help with trouble shooting or setup. I apprecaite any help. -Roger

Why does DVD Studio Pro compress my 3GB video?

I thought since the original Quicktime movie I made with FCP was under the 4.7(?) capacity of a DVD, that Studio Pro wouldn't compress my 3GB movie. But after import to DVD Studio Pro the whole project only shows up as using 350MB of space. And when burned and played back the video looks horrible! Artifacting (?), etc.
Do I need to go into Compressor and select a setting there BEFORE bringing it into Studio Pro? What setting is recommended? (8 min, wide screen, HD).
Thanks!

>I thought since the original Quicktime movie I made with FCP was under the 4.7(?) capacity of a DVD, that Studio Pro wouldn't compress my 3GB movie.
Unfortunately, you thought wrong. The DVD video specification requires MPEG-2 video and either AC3 or PCM audio, specially multiplexed and formatted as VOB files. So the size of the source file doesn't really matter.
>Do I need to go into Compressor and select a setting there BEFORE bringing it into Studio Pro?
That would be preferable.
>What setting is recommended?
Duplicate one of the DVD presets and adjust the bit rate to increase the quality ... but do not exceed 8.0mbps or the disc may stutter in some players. Encode the audio as Dolby Digital (.ac3).
>8 min, wide screen, HD
You're out of luck there ... DVD is a standard definition format only. If you want to deliver HD content on an optical disc, it will have to be Blu-ray - not DVD.
-DH

What makes DVD Studio Pro work faster? and batching builds?

Hi folks,
I've been using SP for years and finally have to ask - what makes it do the following faster:
- importing m2v files
- creating builds (muxing tracks etc...)
Is it a faster processor, RAM or multi-cores?
I have a 2009 quad 2.66 and I notice that the cores are barely being used. I have 8 GB RAM.
I just find it takes a longer than expected time to build a 1 hour 45 SD DVD (approximately 9 minutes) . I have the AC3 and M2V files and basic filmstrip menus.
Also, any way to batch builds? Lately, I'm doing multiple disc transfers for clients and it would be great if I could set a batch and walk away instead of having to be here every 7-12 minutes to run a new build. Not complaining per say, but trying to maximize workflow. Some projects take 45 minutes just to run the builds (although I will start burning as they are made).
Cheers,
Keebler

Thanks Brad. I may try compressor again. The quality of Bitvice is better imho and I don't have to beg it to use all cores.
I can only get multiple machines going on 1 file then it crashes/locks up for any additional files.
So much that I even have still opened support calls with the FCP team. I sure wish it worked for me. Seems to be ok for others. Probably something silly I'm doing.

Does DVD Studio pro support 1080p for HD-DVD?

I can't find this option in the track and menu settings options.

Eric Pautsch1 wrote:
The spec does support 1080p but Compressor doesn't encode this.
Actually, Compressor does encode 1080p - so long as you limit the definition of 1080p to 23.98 fps.
The 'issue' that Marc is bumping into is the same one that so many of us were first stumped by when we began creating 24p SD DVDs: DVDSP uses the pulldown-rate as the frame rate (so 23.98 Compressor encodes are seen as 29.97 Non-drop Frame) and Tracks must be 29.97 fps to ensure playback because HD-DVD (and Blu-ray) is limited to 1080i over Component video connections.
Also, and I know this seems silly to some, but HD-DVD and Blu-ray players can still be connected to old-school non-HD TVs via Component, S-Video and Composite connections, so 29.97 playback must be assured.
Hope that helps.

Does DVD Studio Pro 3 handle dual layer DVD recorders?

If not is it possible just to output the project as a build and use toast 7 to write to a dual layer machine?
jmf
dual G5 Mac OS X (10.4.6)

I don't believe it will handle burns directly from within DVDSP to a DL burner/disc. You definitely can output a project hard drive and use toast. If you output your project and don't set a layer break, Toast will pick the appropriate spot for you. If you set the layer break yourself, Toast will honor it (if it is on media but not media) if it is in the appropriate locatioin. If you output to an image file and burn the image file, you need to set the layer break yourself AND make sure it is in the correct position since Toast will not be able to change it. If you mount the image file first and burn the project with Toast after that, then Toast can adjust the layer break if it needs to. You would build your project first to your hard drive and make sure there aren't any problems or errors with the build. You would then format your build to your hard drive as an image file, make sure you select the appropriate sized media, and select a layer break that is appropriate. If your image file formats and compiles without a hitch, you should be good to go.
Jim

HD DVD: H264 does it work with DVD STUDIO PRO

I compressed a HD movie from FCP via COMPRESSOR using the HD DVD: H.264 setting, then made a HD DVD in DVD Studio Pro (1280 x 720). It played fine in the Simulator, but then I used Advanced Format & Burn to make a DVD to the Hard drive (img).
When it plays, the movies are jerky, like the movie is sticking or stuttering. I put the "img" on a Powerbook pro and it did the same thing. Does DVD Studio Pro work with the H.264? I noticed it did a conversion when the file was imported.

I am having the same problem. What was the solution?

DVD studio pro in mavericks?

any professional dvd authoring for mavericks?

If your question is, does DVD Studio Pro work on Mavericks, the answer is yes.
Russ

Will DVD Studio Pro support dual layer media

I have a project that is 1 hour and 46 minutes long. DVD Studio Pro 2 has built the project but it reports that a 4.7 DVD will not hold the build. Other than the Data Meter, is there a way to find out how much the project is over 4.7? What are my options? Is it possible to lower the compression settings to get this to fit without sacrificing too much quality? Does DVD Studio Pro 2 support dual layer burning? Sorry about asking these questions, but I am on my laptop which does not have the program or help/manual and I would like to find out ASAP so I can order dual layer media if that will work.
How sketchy is playback of home burned dual media in ordinary DVD players?

You should be able to get your project on a DVD-5, you would need to adjust your encoding settings and depending on the footage you may not see a big hit (You can build the project to see how far over it actually is)
First if you have not made the audio AC3, do so, will save room
As to the video , take a look here for calculator
http://www.videohelp.com/calc.htm
Usually I tweak a bit lower than the calulator. For instance if it says an average rate of 5.2, set you average to 5, chances are you will not see the differene between 5 and 5.2 and can save you reencoding heartache/headache down the road. Max rates really should not be higher than 7.4 or so - do not set max video rates to 9.636 as shown in the calculator. In theory it works, in practice can cause playback issues.
How sketchy is playback of home burned dual media in ordinary DVD players?
+R DL works fairly well DVD SP 2 did not support DL burning if I recall correctly, but if you have Toast you can burn from there.

LaCie DLB trouble communicating with DVD Studio Pro 4

I have built and formatted my 5gb dvd properly inside of DSP 4. I have LaCie DLB External firewired in and set properly. When I go to burn the tray comes out, it muxes...but when the formatting begins it stops and I get this message; "Formatting failed. The recording device reported the error #6: Power on, reset, or bus device reset occurred. (0x29, 0x00). I know the burner works if I use Toast...but I want it to work directly from DVD studio pro 4. My question is...1) what is that message? 2) does dvd studio pro 4 and LaCie work together? LaCie says they don't support dvd studio pro 4. 3) would it just be easier to install a internal dual layer burner?

http://www.ncmug.org/tips/repair_permissons.html
Delete the "com.apple.dvdstudiopro.plist" before or after you install the update but before you repair permissions.

Can i install Final cut studio 5 and DVD Studio Pro 4 on OSX lion

Is any body who can help me on giving me some direction on how to install Final Cut Studio 5.1 and DVD Studio Pro 4 on my OSX Lion, if it's doable. Thanks

The easiest way is to install Rosetta from a Mac OS X 10.6 DVD first.
There's also a way of doing it via Terminal that's been posted here a couple of times. A search should bring that up.
Edit: Found it... https://discussions.apple.com/message/21416133#21416133 read the second post.

Does DVD Studio Pro 4 Work In Moun￼tain Lion OS 10.8.3 ?

Similar Messages

Maybe you are looking for

Does DVD Studio Pro 4 Work In Mountain Lion OS 10.8.3 ?