Does E-Sourcing/CLM has standard PI interface with MDM?

Dear Experts,
Does E-sourcing in its latest version support standard PI interface with MDM?
Thanks and regards,
Ranjan

Hi
E SOurcing 7.0 doesn't have a standard PI interface with MDM.
Regards
Mudit Saini

Similar Messages

Does ip source guard has any syslog or message??(on 2960 switch)

hi everyone , I got a problem that I need to config a secure feature "IP SOURECE GUARD" on 2960 switch
Everthing is ok
But, when the IP-MAC mismatch
I can't receive any SYSLOG from "show log"
Only from "show ip verify source" to know which interface be denied
L2#show ip verify source
Interface Filter-type Filter-mode IP-address       Mac-address        Vlan
Fa0/2      ip-mac       inactive-no-snooping-vlan
Fa0/3      ip-mac       active       deny-all         permit-all         10
Fa0/4      ip-mac       inactive-no-snooping-vlan
Fa0/5      ip-mac       inactive-no-snooping-vlan
Fa0/6      ip-mac       inactive-no-snooping-vlan
Fa0/7      ip-mac       inactive-no-snooping-vlan
Fa0/8      ip-mac       inactive-no-snooping-vlan
Fa0/9      ip-mac       active       192.168.10.1     permit-all         10
Fa0/10     ip-mac       inactive-no-snooping-vlan
does ip source guard has no Features to create LOG ??
or anyone can tell me what I can do that I can receive some message when the "deny-all" situation be triggered
Regards,
Lin

I have exactly the same question : is it possible to have a syslog message when an Ip source guard event occurs on a switch 2960 ?
Is anyone can help us ?

Does Weblogic 8.1 has standard or enterprise edition?

Casue i found in registry.xml, there is so called 'BEA WebLogic Platform 8.1' only. Thanks.

WebLogic Server installers write the WebLogic Platform name to the registry file. You should have a component name of WebLogic Server in that file also. This indicates that WebLogic Server has been installed. The same WLS installation is used to support all WebLogic Server product/license types - there is not a "Standard Edition" vs. and "Enterprise Edition" WebLogic Server installation. The difference between "Standard Edition" and "Enterprise Edition" is a difference in license entitlement. You probably have the right WLS installation for either one.

Our product has used OLI interface with IWebBrowser but crashes since OLE Zero Day Patch (Nov 12)

It crashes when we call the Navigate method (see below). This has worked for many years in all previous windows environmnets but is crashing on windows 7 since OLE Zero Day Patch (Nov 12).
(IDispatch(GetOleObject) as IWebBrowser2).Navigate(URL, EmptyParam, EmptyParam, EmptyParam, EmptyParam)
What can we do to rectify this problem.
Thanks
Jim Clark
jim@m&&&&.com.au
61 03 9&&& 0086

Hello Jim Clark,
Please temporarily uninstall the Update and check if this issue still exists.
For the methods not work and how to debug it, please consider seek help at the developer forum for more professional help.
Thank you for your understanding.
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

What does the warning CS6 has stopped working mean for Elements 12?

What does the warning CS6 has stopped working mean with ElemenT 12?

Please read this (in particular the section titled "Supply pertinent information for quicker answers"):
http://forums.adobe.com/docs/DOC-2325
If you are talking about Photoshop Elements please post over at
http://forums.adobe.com/community/photoshop_elements

What is the best design tablet with stylus to have an easy interface with Adobe Photoshop?

What is best design tablet with stylus for use with Adobe Photoshop for this holiday seasons offering 2013?
I am trying to find a tablet with good stylus to work with Adobe Design products primarily Photoshop. I would like one that worked in layers with photoshop.
The folks a Wacom don't even answer the phone just a recorded message go to the web site with questions. Not a good sign for a company. So what is a good design tablets for pressure sensitive stylus? Will wacom cintiq tablet interface well with Apple Imac IOS 10.8?
I love my Samsung note 3 but it will not easily transfer images to apple Imac 10.8.
Please help me find tablets with good adobe design interface? Just tell me which way to jump. It is easier to leave Apple for PC or Android than to abandon Adobe knowledge. The products have to work together.
Does wacom Cintiq not embrace an easy interface with Apple Imac IOS 10.8 latest software. Wacom seems to be championing Windows 8 as a companion to their tablet interface.
Can an Ipad deliver good layered designs using adobe software design programs and a stylus?
What should I buy for an Adobe design tablet with pressure sensitive stylus for ths Holiday Season?
Should i wait until next year?
Will the tablet work in Photoshop layers?
this link seemed ominus
http://forums.adobe.com/message/4950467

subhash007 wrote:It's not 802.3ad link aggreagated interface. In the switch side, the ports will be configured as normal access ports and the bonding config will be done on the server side.
To be honest, I don't understand how the Linux bonding mode can work without anything configured the other end.
My understanding of 'bonding' comes from Multilink PPP (MLP) where the data stream is chopped up and split across two (or more) circuits. At the other end, a similar MLP-enabled device reforms the data stream from the multiple circuits, maintaining packet order. But this requires MLP-enabled 'bonding' devices at each end.
Perhaps you could help me better understand the Linux bonding...
subhash007 wrote:If any single homed server is connected to Switch 2, what will be traffic path for its data packets?Switch 2 ------------------> Switch 1 ----------------------> Active firewall ORSwitch 2 ------------------> Passive Firewall -----------> Active Firewall
If the firewalls operate in the same fashion as Cisco ASAs, then the inter-firewall link doesn't carry traffic. It's for failover detection and HTTP replication only. But like I said, I'm not familiar with this vendor's products.
subhash007 wrote:Also will there be any change in traffic path if the trunk between Switch 1 & Switch 2 is converted to L3 routed interface? Since there is no VRRP, i can convert the trunk to L3 right?
Same as above.

I2C interface with 400kHz clock rate

The max clock rate of NI's USB-8451 I2C interface is 250kHz.
Please support my request for an interface with at least 400kHz.
Has anybody used interfaces (with LV driver) from third-party suppliers with a clock rate of 400kHz or higher ?

Hi Christian,
Thank you for your suggestion.
Because I don't use the LV FPGA Module, this is a too expensive solution !
Best regards

Not too hot about the jazz the Apple drum loops, does anyone know of a good drum software to interface with logic? Or, a loops source to get quality brush samples.

Logic has no decent jazz brushes in there drum loops!! What to do???

Hi j232..for interfacing drum i would suggest Superior drummer 2.0. It has all the loops u want plus it keeps getting the expansion packs (i mean u have to buy it )which are genre based so as of now it has everything from vintage kits to new age. Also it says on the site(toontrack.com) that its tested with logic.
I used it in mixcraft on my PC. and it was very easy, real and satisfying for me. Ordered it now for my new mac to interface with logic pro.
hope that helps
cheers

Error 1075: The dependency service does not exist or has been marked for deletion

Windows 7 Pro laptop will not connect to corporate domain. Multiple identical twin laptops have no problem.
Best suggestion so far has been to leave the domain and rejoin it, BUT the relevant buttons are grayed out and the comment says "Note: The identification of the computer cannot be changed because:- The Workstation service is not running. Open the Services
snap-in (services.msc) to ensure it is running and set its Startup Type as "Automatic"."
In services.msc the Workstation service is already set to Automatic but is not started. When I try to start it manually the response is "Windows could not start the Workstation service on Local Computer." and then "Error 1075: The dependency service does
not exist or has been marked for deletion."
Rebooting gets me nowhere.
In all other respects that laptop appears fine and can connect to the Internet, but NOT to the network. I have brought it and a twin laptop home to try on my domestic network and get the same results.
Any ideas, please?

Hi,
Let us go to services.msc and navigate to Network Store Interface Service. Please check whether this service has been set to Automatic and turned on.
Kim Zhou
TechNet Community Support

Regarding datasource i'e., The OLTp source still has errors

Hi experts,
I was getting an error while creating datasource i.e, "The OLTP source still has errors".
Last 2 days onwards i was getting this error. Previously i have created many datasources.Eventhough i was gettign sam error
while doing any changes in existing datasource. Kindly help me out in this issue.
Regards,
Sree.

Anil,
I will explain in detail.
We want to do enhancement for datasources (transaction or Generic datasources...whatever it is).
LBWQ or RSA7 question will not come here...ok....
any time we can do enhancement by adding additional fields to the extract structure(appending..) of trans. or generic or masterdatasource.....
In my case, If i add some fields to the extract structure(appended str.)in source system(r/3- datasource-2lis_13_vditm) and save it. immediatly we are getting message saying that 'OLTP SOURCE ERROR'...
Is there any problems in source system/installation.
Thanks,
Mahantesh
similarly, the same problem will come for all the datasources - enhancment.
how do

An error has occurred during report processing. (rsProcessingAborted). Query execution failed for dataset 'DimUserWorkCentre'. (rsErrorExecutingCommand). The Cube either does not exists or has not been processed

Hi,
I'm having issues with the report created using SSAS cube.
An error has occurred during report processing. (rsProcessingAborted)
Query execution failed for dataset 'DimUserWorkCentre'. (rsErrorExecutingCommand)
The Operator_Performance cube either does not exist or has not been processed.
I have searched through internet and tried all the solutions, but didn't worked for me.
SSRS services running as NETEWORK SERVICE user.
SSRS Execution running as a Different user, which is the login is used to logon ot that server. I have also verified this user has access to database. I'm using Shared DataSource(SSAS Source) for this report.
Can any one please help me.
Thank You,
Praveen.
Praveen

Hello,
Have you tried it to execute on report manager , Is your data source properly configured in Report Manager and your report is mapped with Datset correctly?
Have you executed the Dataset query MDX editor now?
What is the volume of data you are fetching in the report. Try it to execute in other than IE , I don't know the exact reason but some of our report with large volume of data are failing on IE , on the other hand these reports are running fine Google
Chrome
blog:My Blog/
Hope this will help you !!!
Sanjeewan

Does the RFFOEDI1 program has any implication on the ACH direct deposit?

Hi all,
Can any one please explain the use of RFFOEDI1 program. Is this
program used just to generate I-Doc?
Scenario: For Check payment method(C)
Once F110 run is successful, then we have to run RFFOUS_C program to
generate checks. Once this program is complete, checks will be
generated and the check info will be available in PAYR table.
Scenario: For ACH-CCD payment method (D)
Once F110 run is successful with payment method D, The payment details
will hit BSAK table.
Now, I don't want to generate the SAP standard I-Doc with RFFOEDI1, do
I still need to run RFFOEDI1 program???
For the check payment, RFFOUS_C program triggers the generation of
checks after which the check info will be available in PAYR table
Likewise, does the RFFOEDI1 program has any implication on the ACH
direct deposit?
To my understanding, If you do a payment using payment method, ACH
direct deposit in SAP, we don't generate any check numbers ???!!!
Do we get any reference number or anything when the direct deposit is
done??? This reference number could be used to trace the invoice
against which this ACH payment was done!
If it is the case, where do we get/ when do we generate the reference
number to trace the invoice????.....any inputs?
If we are not going to run RFFOEDI1 program, (if we are not interested
in generating IDoc) then are we DONE with the ACH direct deposit, once
we are done with payment run(F110)???
Where do we get the reference number which specifies the ACH payment?
Sorry, I have poured in lot of question at one place!
Any inputs/ solutions/ suggestions are greatly appreciated!
Thanks a lot!

RFFOEDI1 is typically used when payments to vendors are to be sent by an EDI 820 file to the bank. This program generates the PEXR2002 idoc. The idocs are sent to the EDI translator where these are mapped to an EDI 820 file format and sent to the bank.
Scenario ACH-CCD payments method (D)
If you do not want to send EDI 820 payments, you would typically not generate the idoc - in which case - you dont have to use RFFOEDI1. This probably means that (a) you are using the RFFOUS_T program for generating the payment medium or (b) you are using the payment medium workbench to generate the ACH file (NACHA format) for your house bank.
You do have to send an ACH file to the bank for paying your vendors - which means - you are probably using one of the above methods to generate the file.
ACH Direct Deposit
I am assuming that you are probably referring to ACH-PPD type payments here. You would still have to send the payment medium using one of the methods mentioned above.
In all ACH scenarios, your payment document number, is your reference number that was used to clear the open item.
Hope this helps.

Has adobe adopted the compound math feature like quark has in its interface.

I am currently working with CS3. Has adobe adopted the compound math feature like quark has in its interface.
For instance If I want to duplicate an item 29/6" vertically but I know that that step should be 1/8" short, in quark I can type 29/6-.125, or 29/6-1/8. Either method will give me 4.708333. Same issue when I just want to draw a box a specific size minus or plus 15/64 or an inch. Adobe forces me to look up the decimal equivalent before I enter it or I will get the message: "INVALID NUMERIC VALUE"
This applies to all adobe products I use.
This really slows production down and I hope CS5 allows this now.

Seriously Bob, Seriously. Quark has had this feature for 20+ years.
Quick, do the following, draw a box or a line or anything.
Now move it to here.
2.0416 in +3/64 -7pt -3in -9.7mm
I can type this verbatim in qxd and end up with what I want, I CANNOT do this in any adobe product that I currently use.
There is nothing wrong with my attitude, this is a feature that I use daily in my work and having indd and ill require me to look up decimal equivalents of inch fractions is not productive.
If my priorities do not match your priorities why does that make mine a total mess?
Oooh Gotchew on that one. Gotchew on that one. You have no answer for that.
"Hard to believe all the cool stuff you still can't do with Quark, too."
I don't like one app over another I use both daily but indd seems more stable. If you want to argue Toyota vs Chevy, go ahead. I think one software company should look at competing products and implement functionally positive features in their own.
I suppose to carry my analogy further, Adobe may have added nice features like a sunroof, and power windows but has not added power steering like their competitor has had for 20+ years. I really don't use the "Cool Stuff" in the products I manufacture.
I will waste no more time here and will simply flood the company with this feature request as I have been doing.

E-Sourcing/CLM - next versions?

Hi
We concider to implement the E-sourcing/CLM solution.
But I can see that the mainstream maintenance of the current versions (e-sourcing 5.1/CLM 2.0) ends in 2012.
Therefor we would rather wait for the next version if it is released soon.
I can see that e-sourcing 6/CLM 3 is available as a hosted solution.
Will the not-hosted solutions be GA soon?
Best regards
Lars

Hi,
u2026Whatu2019s the change from SAPu2019s latest on the product line?
-          Current version of SAP E-Sourcing is 5.1
-          E-Sourcing 6.0 will be made available as "On-Demand" multi-tenant solution. For the customers who are interested in "Single Tenant Hosted" deployment option, we will be also offering "On-Demand Private
Edition" of E-Sourcing 6.0 at the same time, November 26, 2009. Customers who are interested in the "On-Premise" deployment will need to wait for the next release, E-Sourcing 7.0, currently scheduled for
August 2010.
So what is the suggested way forward if you want to upgrade from E-sourcing 5.1(on premise) to E-Sourcing 6.0?
And what is the suggested way for customers who want to have new E-Sourcing 6.0 on premise installed? Is it not an option or wait till Aug 2010?
This is what SAP has to say
SAP have made strategic decision not to make the "On-Premise" deployment option available for every "On-Demand" release.
- In order to introduce new features faster, SAP will be focusing on "On-Demand" solution with a new release in every six months. (New OD releases scheduled for Q2 2010, Q4 2010, Q2 2011, Q4 2011, etc..)
- On-Premise customers typically do not upgrade every six months. When SAP delivers an "On-Premise" release, it will be a cumulative release that includes all new features delivered in the all prior "On-Demand" releases. So, SAP will continue to provide new features to "On-Premise" customers and will continue to provide a reasonable migration path for all On-Premise customers.   However, it won't be as frequent as "On-Demand" releases and the "On-Premise" release will be synchronized with the SAP Business Suite release cycle.
Next "On-Premise" release (E-Sourcing 7.0) is currently scheduled for August 2010.
Hope this helps
~Ankush

Sourcing 7.0 Standard Implementation Estimate

Hello,
We are looking to implement following standard features of SAP Souring 7.0 (on premise) for one of our customers:
- Strategic Sourcing
- CLM
We will use Global Text Search without Optimizer and Contract Generation. Based on what I have read I have made a high level plan as follows
Plan
Installation and Requirements - 2 weeks
Configuration - 4 weeks
Data Load, Customization, 1 Integration with SRM and 1 workflow - 4 weeks
Testing - 2 weeks
Training - 2 weeks
Resources
PM - 1
Sourcing and CLM Consultant - 2
Basis - 1
Data Load and Testing - 2
PI for Integration - 1
Beanshell JAVA - 1
XPDL Workflow - 1
If the experienced people who have done such implementation can validate the same, it will be of great help.
Regards,
Jai

HI Jai
Plan
Installation - 4 weeks
Configuration - 4 - 6 weeks
Data Load, Customization, Integration with SRM and workflow 6 - 8 weeks
Testing - 2 - 4 weeks
Training - 2 weeks
Total: 5 - 6 months approx
Resources
PM - 1
Sourcing and CLM Consultant - 1
Basis - 1
Data Load and Testing - 1
PI for Integration - 1
Beanshell JAVA - 1
XPDL Workflow - 1
Above plan and resources would be fine for any standard implementation. Assuming its for E-Sourcing without CLM and Optimizer
Regards
~Ankush Mittal

Does E-Sourcing/CLM has standard PI interface with MDM?

Similar Messages

Maybe you are looking for