Does E4200 support getting prefix delegation by DHCPv6
As the title.
i would like E4200 to get a PD from DHCPv6 server, and E4200 could assign address in PD to PCs connected to it by SLAAC/DHCPv6.
could current E4200 FW 1.0.3 support this?
you can double check thta on the firmware's release notes.
Yesterday is history. Tomorrow is mystery. Today is a gift.
Similar Messages
-
Does E4200 support Sony Remote play?
I have a Sony Vita , PS3, & Cisco ASA 5505 firewall. I can get remote play to work only if the PS3 is powered on. The ASA will kill any Wake-on LAN packet no matter what I do to try to allow it. Apparently it doesn't support directed broadcast.
Has anyone gotten Remote Play to worth with Wake-on LAN through an E4200 or E4200v2 (not sure which one I need)?
ThanksWell, some of the user claims that WOL can be resolved. So here is the link: http://homecommunity.cisco.com/t5/Wireless-Routers/E4200-Port-forward-to-broadcast-for-WOL/td-p/3720...
So, please follow the steps mentioned in the above link and see it that helps for you… -
It can NOT parse ....
<?xml version="1.0" encoding="utf-8"?><s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/"><s:Header><h:ServerVersionInfo MajorVersion="14" MinorVersion="2" MajorBuildNumber="309
" MinorBuildNumber="3" Version="Exchange2010_SP2" xmlns:h="http://schemas.microsoft.com/exchange/services/2006/types" xmlns="http://schemas.microsoft.com/exchange/services/2006/types" xmlns
:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"/></s:Header><s:Body><m:GetFolderResponse xmlns:m="http://schemas.microsoft.com/exchange/service
s/2006/messages" xmlns:t="http://schemas.microsoft.com/exchange/services/2006/types"><m:ResponseMessages><m:GetFolderResponseMessage ResponseClass="Success"><m:ResponseCode>NoError</m:Respo
nseCode><m:Folders><t:CalendarFolder><t:FolderId Id="AAMkADExNjY4ZWRmLWIwN2YtNDAxMS05ZjEzLTg3YTRiMjQ0ZGY3ZQAuAAAAAADU0n/e4OgzQYvxnEFT1sxPAQA1LVqe3bVEQ6g4HVLTxYapAFiIzwa6AAA=" ChangeKey="AgA
AABYAAACUAPkRiik5TYV1B0n4GmWXAAAAAj0P"/><t:ParentFolderId Id="AAMkADExNjY4ZWRmLWIwN2YtNDAxMS05ZjEzLTg3YTRiMjQ0ZGY3ZQAuAAAAAADU0n/e4OgzQYvxnEFT1sxPAQA1LVqe3bVEQ6g4HVLTxYapAFiI0lHWAAA=" Chang
eKey="AQAAAA=="/><t:FolderClass>IPF.Appointment</t:FolderClass><t:DisplayName>Calendar</t:DisplayName><t:TotalCount>2</t:TotalCount><t:ChildFolderCount>0</t:ChildFolderCount><t:EffectiveRig
hts><t:CreateAssociated>true</t:CreateAssociated><t:CreateContents>true</t:CreateContents><t:CreateHierarchy>true</t:CreateHierarchy><t:Delete>true</t:Delete><t:Modify>true</t:Modify><t:Rea
d>true</t:Read><t:ViewPrivateItems>true</t:ViewPrivateItems></t:EffectiveRights><t:PermissionSet><t:CalendarPermissions><t:CalendarPermission><t:UserId><t:DistinguishedUser>Default</t:Disti
nguishedUser></t:UserId><t:CanCreateItems>false</t:CanCreateItems><t:CanCreateSubFolders>false</t:CanCreateSubFolders><t:IsFolderOwner>false</t:IsFolderOwner><t:IsFolderVisible>false</t:IsF
olderVisible><t:IsFolderContact>false</t:IsFolderContact><t:EditItems>None</t:EditItems><t:DeleteItems>None</t:DeleteItems><t:ReadItems>TimeOnly</t:ReadItems><t:CalendarPermissionLevel>Free
BusyTimeOnly</t:CalendarPermissionLevel></t:CalendarPermission><t:CalendarPermission><t:UserId><t:DistinguishedUser>Anonymous</t:DistinguishedUser></t:UserId><t:CanCreateItems>false</t:CanC
reateItems><t:CanCreateSubFolders>false</t:CanCreateSubFolders><t:IsFolderOwner>false</t:IsFolderOwner><t:IsFolderVisible>false</t:IsFolderVisible><t:IsFolderContact>false</t:IsFolderContac
t><t:EditItems>None</t:EditItems><t:DeleteItems>None</t:DeleteItems><t:ReadItems>None</t:ReadItems><t:CalendarPermissionLevel>None</t:CalendarPermissionLevel></t:CalendarPermission></t:Cale
ndarPermissions></t:PermissionSet></t:CalendarFolder></m:Folders></m:GetFolderResponseMessage></m:ResponseMessages></m:GetFolderResponse></s:Body></s:Envelope>
microsoft.exchange.webservices.data.ServiceRequestException: The request failed. An element node 'soap:Envelope' of the type START_ELEMENT was expected, but node '{http://schemas.xmlsoap.or
g/soap/envelope/}Envelope' of type START_ELEMENT was found.
at microsoft.exchange.webservices.data.SimpleServiceRequestBase.internalExecute(SimpleServiceRequestBase.java:51)
at microsoft.exchange.webservices.data.MultiResponseServiceRequest.execute(MultiResponseServiceRequest.java:142)
at microsoft.exchange.webservices.data.ExchangeService.bindToFolder(ExchangeService.java:346)
at microsoft.exchange.webservices.data.ExchangeService.bindToFolder(ExchangeService.java:370)
at microsoft.exchange.webservices.data.Folder.bind(Folder.java:50)
at microsoft.exchange.webservices.data.Folder.bind(Folder.java:69)
at com.tsg.ews.GetItemWorker.run(GetItemWorker.java:252)
at java.lang.Thread.run(Thread.java:662)
Caused by: microsoft.exchange.webservices.data.ServiceXmlDeserializationException: An element node 'soap:Envelope' of the type START_ELEMENT was expected, but node '{http://schemas.xmlsoap.
org/soap/envelope/}Envelope' of type START_ELEMENT was found.
at microsoft.exchange.webservices.data.EwsXmlReader.internalReadElement(EwsXmlReader.java:114)
at microsoft.exchange.webservices.data.EwsXmlReader.readStartElement(EwsXmlReader.java:618)
at microsoft.exchange.webservices.data.ServiceRequestBase.readResponse(ServiceRequestBase.java:450)
at microsoft.exchange.webservices.data.SimpleServiceRequestBase.readResponse(SimpleServiceRequestBase.java:101)
at microsoft.exchange.webservices.data.SimpleServiceRequestBase.internalExecute(SimpleServiceRequestBase.java:38)After these change still I am getting this kind of Error:
microsoft.exchange.webservices.data.ServiceRequestException
at microsoft.exchange.webservices.data.SimpleServiceRequestBase.internalExecute(SimpleServiceRequestBase.java:63)
at microsoft.exchange.webservices.data.MultiResponseServiceRequest.execute(MultiResponseServiceRequest.java:142)
at microsoft.exchange.webservices.data.ExchangeService.internalFindFolders(ExchangeService.java:202)
at microsoft.exchange.webservices.data.ExchangeService.findFolders(ExchangeService.java:257)
at ci.cryoserver.ews.EWSUtils.testEWSWebService(Unknown Source)
at org.apache.jsp.save_005fimap_005fmailbox_005freader_005fuserinfo_jsp._jspService(save_005fimap_005fmailbox_005freader_005fuserinfo_jsp.java:453)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:728)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:432)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:390)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:334)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:728)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:305)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:210)
at ci.cryoserver.frontend.filter.CompanyTagFilter.doFilter(CompanyTagFilter.java:69)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:243)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:210)
at ci.cryoserver.ntlm.CryoHttpSecurityFilter.doFilter(CryoHttpSecurityFilter.java:105)
at ci.cryoserver.ntlm.SSOFilter.doFilter(SSOFilter.java:66)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:243)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:210)
at ci.cryoserver.ntlm.NTLMPostFilter.doFilter(NTLMPostFilter.java:39)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:243)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:210)
at ci.cryoserver.frontend.filter.CharsetFilter.doFilter(CharsetFilter.java:152)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:243)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:210)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:222)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:123)
at org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:502)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:171)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:99)
at org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java:953)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:118)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:408)
at org.apache.coyote.http11.AbstractHttp11Processor.process(AbstractHttp11Processor.java:1023)
at org.apache.coyote.AbstractProtocol$AbstractConnectionHandler.process(AbstractProtocol.java:589)
at org.apache.tomcat.util.net.JIoEndpoint$SocketProcessor.run(JIoEndpoint.java:312)
at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
at java.lang.Thread.run(Thread.java:662)
Caused by: microsoft.exchange.webservices.data.ServiceXmlDeserializationException: An element node 'soap:Header' of the type START_ELEMENT was expected, but node '{http://schemas.xmlsoap.org/soap/envelope/}Body' of type START_ELEMENT was found.
at microsoft.exchange.webservices.data.EwsXmlReader.internalReadElement(EwsXmlReader.java:121)
at microsoft.exchange.webservices.data.EwsXmlReader.readStartElement(EwsXmlReader.java:625)
at microsoft.exchange.webservices.data.ServiceRequestBase.readSoapHeader(ServiceRequestBase.java:565)
at microsoft.exchange.webservices.data.ServiceRequestBase.readResponse(ServiceRequestBase.java:525)
at microsoft.exchange.webservices.data.SimpleServiceRequestBase.readResponse(SimpleServiceRequestBase.java:171)
at microsoft.exchange.webservices.data.SimpleServiceRequestBase.internalExecute(SimpleServiceRequestBase.java:49)
... 40 more
This Account is working perfectly with autodiscovery mode. any fix for this ? -
Does Airport Extreme 802.11ac support DHCPv6 prefix delegation
I have IPv6 working with my Airport Extreme 802.11ac. I'm experimenting (for fun) with IPv6 on my local network, and I was trying to create another IPv6 subnet using DHCPv6 prefix delegation.
Comcast (my ISP) is indeed delegating a 64-bit prefix to the Airport Extreme, but the Airport Extreme does not seem capable of sub-delegating that 64-bit prefix (into say 2 65-bit prefixes, or 4 66-bit prefixes, etc).
Is the Aiport Extreme 802.11ac is capable of sub-delegating IPv6 prefixes like this?I have the exact same problem with my ISP (Init7) here in Switzerland. They delegating IPv6 adresses via DHCPv6-PD (Prefix Delegation) and my Apple AirPort Extreme just get only an IPv4 address.
Since the worldwide use of IPv6 is rising steadily, I really hope Apple will wake up and update the firmware of its AirPort devices to support DHCPv6-PD. -
RV220W - DHCPv6 Prefix Delegation - Edit the configuration file?
I am trying to configure this router to obtain an IPv6 address from my ISP who offers a dual stack IPv4/IPv6 DHCPv6 Prefix Delegation service.
I did a WAN packet capture to see the type of DHCPv6 packets the router sends to the ISP in order to obtain an IPv6 address and I saw that the router is sending DHCPv6 solicitation packets of type IA_NA i.e. for Identity Association for Non-temporary Address. However, most ISPs that offer a dual stack IP4/IPv6 service, they use DHCPv6 Prefix Delegation in which case the router is expected to send DHCPv6 solicitation packets of type IA_PD i.e. for Identity Association for Prefix Delegation.
I then downloaded its configuration file and saw the following:
dhcpv6c = {}
dhcpv6c[1] = {}
dhcpv6c[1]["renewTime"] = "3600"
dhcpv6c[1]["statelessMode"] = "1"
dhcpv6c[1]["prefixDelegation"] = "0"
dhcpv6c[1]["preferredAddress"] = ""
dhcpv6c[1]["LogicalIfName"] = "WAN1"
dhcpv6c[1]["requestPreferredAddress"] = "0"
dhcpv6c[1]["requestDNSSearchList"] = "0"
dhcpv6c[1]["requestPreferredPrefix"] = "0"
dhcpv6c[1]["preferredAddressPrefixLength"] = "0"
dhcpv6c[1]["requestDNS"] = "1"
dhcpv6c[1]["sendRapidCommit"] = "0"
dhcpv6c[1]["isEnabled"] = "1"
dhcpv6c[1]["preferredPrefix"] = ""
dhcpv6c[1]["_ROWID_"] = "1"
dhcpv6c[1]["preferredPrefixPrefixLength"] = "0"
So, the option for the DHCPv6 client to perform a prefixDelegation request is disabled. Does that mean that if I set this flag to "1" it is going to work? Well, I edited the configuration file and changed this flag but the router refuses to load it! It complains about the file being changed. How does it know that? Is it computing some type of checksum? Does anyone know how can I manually edit this flag and update the router's configuration?I can't help you because our ISP doesn't support native ipv6. I suggest you call Cisco Small Business technical support. All you need is your serial number and your Cisco username to get support. Tori is awesome to work with.
-
Since updating OS to Mountain Lion from leopard, I get the following error message when trying to backup with time machine on external drive. "Could not complete backup to media share. The network backup disk does not support the required AFP features." What are AFP features and how do I get Time Machine to backup to my current external backup?
This means that your NAS does not support the required encryption. Update your NAS to the latest firmware or ditch it and buy a Time Capsule (they are the most reliable when using TM).
-
using time warner road runner. when I try to open up safari to home page I get error message that this version does not support the "community toolbar" can't proceed until closing the error message. sick of seeing it
That toolbar/ct plugin seems to cause problems for all who install it!
Close Safari, then locate and delete the following files and it should be gone:
/Library/Application Support/Conduit
/Library/InputManagers/CTLoader
/Library/Receipts/ctloader.pkg
/Library/Receipts/<Toolbar name>.pkg
/Library/Application Support/SIMBL/Plugins/CT2285220.bundle
/Users/<User name>/Library/Application Support/Conduit
where / is the root library on your Hard Disk.
If you are running Snow Leopard you should also look here:
Library/launchAgents/com.conduit.loader.agent.plist
Library/Application support/conduit plugins
Also, as mentioned by Gilli2000:
Library/Receipts - If you read it, it has information in it at the bottom referring extensively to "CT" and "community toolbar".
Maybe it is harmless, but trash those items anyway!
Note: Safari does not support any third-party toolbars except those supplied as an extension to Safari via the Extension Gallery. -
i get a pop-up window saying the current version of Safari does not support the community toolbar. How do I get rid of this?
You need to uninstall the Community / Conduit toolbar add-on.
Locate the files in bold print and move them to the Trash. The first five are in your root /Library
/Library/Application Support/Conduit
/Library/InputManagers/CTLoader
/Library/ScriptingAddtions (anything CTLoader realted)
/Library/Receipts/<Toolbar name>.pkg
/Library/Application Support/SIMBL/Plugins/CT2285220.bundle
The next one is in your Home folder.
~/Library/Application Support/Conduit
When you're done, try Safari. -
i have a problem with installing PS13 as I get an error message "This installer does not support installation on a 64-Bit Windows operating system. Please download the 64-Bit version of Photoshop Elements." how do i do this
Try downloading the trial. It ought to detect that you have a 64-bit system.
You aren't using Vista, are you? PSE 13 requires at least win 7 and I think a few folks with vista have gotten a similar error message on trying to install it. -
Netflix requires Microsoft Silverlight plug in to view their videos. Every time I try to load it I get the following error message...Your operating system does not support the 64-bit version of Silverlight. I have a 64bit system with Windows Vista Home Premium. Firefox 33.0 is installed.
Any suggestions?Your User Agent: Mozilla/5.0 (Windows NT 6.0; '''WOW64'''; rv:33.0) Gecko/20100101 Firefox/33.0
As said Firefox for Windows from mozilla.org is a 32-bit application. The WOW64 in UA means it is a 32-bit application on 64-bit Windows.
Before you ask if there will be a Win64 version of Firefox. If all goes well the first phase of having Win64 for Release may be as early as Firefox 37.0
https://wiki.mozilla.org/Firefox/win64 -
HI,
I am trying to install OBIEE 11.1.1.6 on Windows 7 .
Have created repository successfully ,using the RCU 11.1.1.6 and now tring to install
OBI. I am getting the below error
"Operating system does not support IPV4".
Can anyone please suggest why i am getting this error or
how should i get rid with this error??
Manoj.Just in case check this Doc ID 1410233.1
~ http://cool-bi.com -
I have Elements 10 and a Nikon D7100. PSE10 CR 6.7 does not support the 7100 NEF. How can I get the updates to do this?
The D7100 requires camera raw 7.4 which is not compatible with Photoshop Elements 10.
Your two main options are
1) Buy a newer version of Photoshop Elements
2) Use the Adobe DNG converter to convert the NEF files to DNG files which can then be used by Photoshop Elements 10.
DNG Converter 8.8
Win – http://www.adobe.com/support/downloads/detail.jsp?ftpID=5888
Mac – http://www.adobe.com/support/downloads/detail.jsp?ftpID=5887
Useful Tutorial
http://www.youtube.com/watch?v=0bqGovpuihw
Brian -
I have Windows 7, and I am being told that it does not support the newest Ai Illustrator, Are there any other alternate routes I can take to get adobe illustrator and photoshop on my computer? Perhaps an earlier version? Thanks! ~
houseofrest,
According to this page, you can use it for CC:
Adobe Illustrator CC for Mac, Windows, PC - Tech specs
Or you can buy CS6:
http://helpx.adobe.com/x-productkb/policy-pricing/system-requirements-illustrator.html -
can anyone help when i try to connect my iphone4 to sync with imac g5 i get a message stating my iphone cannot be used as it requires itunes version 10.6.3 or later when ive tried to download this on my imac it says it does not support it.
All i want to do is sync my iphone 4 with my imac g5 can anyone helpClick here and download the software. Unless otherwise noted, a device running iOS 6 requires at least Mac OS X 10.5.8 and iTunes 10.6.3 to be synced from a Mac.
(78390) -
When I log in I get this message I keep getting the following error message---"We're sorry but the Safari browser version you are currently using does not support the community toolbar."
Also, I can seem to down load my Adobe Flash, I did download what I thought was the correct down load for Safari, but I'm still getting this message "We're sorry but the Safari browser version you are currently using does not support the community toolbar." I was even going to purchase the Leopard for 29.99 to see would this solve my problem but I want to purchase another pc and sale this one, can you help me?
Thank youSee this link.
Also look at More Like This on the right side of these pages for realted threads on this topic (and on the pages those link to).
Maybe you are looking for
-
Hello all, Kind of freaking out here...I recently downloaded a trial version of Episode Pro to try out with FCP. I didn't work to my liking. I decided to uninstall it, because there was an uninstall option in the finder window with the trial applicat
-
Sharing Editing Duties Using Final Cut Express 4.0
I'm fairly new to Final Cut Express. I'm working on a video project with a colleague. He has been working on the project for some time on his Mac. How can I copy his files to aloow me to continue editing the project on my Mac. What files & directorie
-
Additional Tab in Contract Header for SRM 7
Hello, I have a requirement to add custom tabs into the Contract in SRM 7 (latest version) So I added custom fields in the header structure via config, the fields are visible in BBP_PDHSC. Also I did add additional tab into the contract using FPM con
-
Redeemed Gift Card But Credit Balance Not Correct
Hi I redeemed two 50 USD Itunes Gift card in my account however while redeeming each, 25 USD redeemed and it got 25 USD as credited. So totaly It redeemed 50 USD and got 50 USD as credited. I never face such a kind of thing however I can not use also
-
hi, loadjava -user [email protected]:1527:EVTXQ1 -oci8 -resolve -v source.jar While loading java source there are compilation errors & status of source files is invalid. dropjava -user [connect_string] -oci8 source.jar exiting : parsing to determine