DOES EIGRP USE AS NUMBER/process number as it's PORT NUMBER between the routers in the same AS/group?

in this posthttps://supportforums.cisco.com/discussion/9805551/eigrp-port-number there is an answer which seems a little weird, the question asks about the EIGRP port number, and someone answers that "The port number is the EIGRP AS."
I goggled all over the net but could not find any single clue about it!! is that really so, I mean DOES EIGRP USE AS NUMBER AS PORT NUMBER?
I know stuff about routing, EIGRP,RTP and so on, please don't state the obvious and just give some link to some document on Cisco, about this subject.
BTW there's a link under the mentioned post but it doesn't load, I don't know, anyway thank you

Similar Messages

Unable to set default date for Date Picker item using Auto Row Processing

Okay, I have searched through the forum for an answer, and have not found a thing to account for my problem.
First, does anyone know if using Auto Row Processing has problems updating an item/field in a record where the Source is defined as Database Column if the 'Display As' is defined as 'Date Picker (MM/DD/YYYY)'?
I ask this only because I found out the hard way that Auto Row Processing does NOT fetch the value for an item where the field is defined as TIMESTAMP in the database.
My problem is as follows: I have a form that will CREATE a new record, allowing the user to select dates from Date Pickers, text from Select Lists, and entering in text into a Textarea item. The information is saved using a standard (created through the Auto Row Processing wizared) CREATE page level button. After the record is created the user is able to go into it and update the information. At that time, or later, they will click on one of two buttons, 'ACCEPT' or 'DECLINE'. These are Item level buttons, which set the REQUEST value to 'APPLY' (Accept) and 'UPDATE' (Decline). The Accept button executes a Process that changes the Status Code from 'Initiated' to 'Accepted', and sets the Declined_Accepted_Date to SYSDATE, then another Process SAVEs the record. The Declined button runs a Process that changes the Status Code from 'Initiated' to 'Declined', and sets the Declined_Accepted_Date to SYSDATE, then another Process SAVEs the record.
However, even though the Status Code field is updated in the database record in both Accepted and Declined processing, the Declined_Accepted_Date field remains NULL in the database record (by looking at the records via SQL Developer). WHY??? I looked at the Session State values for both the Status Code and the Declined_Accepted_Date fields and saw that the fields (items) had the expected values after the process that SAVEs the record.
The following is the code from the Accept button Page Process Source/Process:
BEGIN
:P205_STATUS_CD := 'A';
:P205_REF_DECLINE_ACCEPT_DT := SYSDATE;
END;
As can be seen, the Status Code and Declined_Accepted_Date items are set one right after the other.
As an aside, just what is the difference between Temporary Session State vs Permanent Session State? And what is the sequence of events to differentiate the two?

Here's yet another thing that I just looked into, further information...
One other difference between the date field I am having problems with (Accepted_Declined_Date), and other dates (with Date Pickers) in the record is that the Accepted_Declined_Date never gets displayed until after it is set with a default date when the Accept and Decline buttons are pressed.
One of the other dates that works, the Received Date, is able to write a default date to the record that is never typed into the box or selected from the calendar. That date is placed into the box via a Post Calculation Computation in the Source, which I set up as: NVL(:P205_REF_RECEIVED_DT,TO_CHAR(SYSDATE,'MM/DD/YYYY'))
However, I do remember actually trying this also with the Accepted_Declined_Date, and setting the Post Calculation Computation did not work for the Accept_Decline_Date. Could this be because the Accept_Decline_Date is never rendered until the Status Code is set to Declined (in other words, there is no need to display the date and allow the user to change it until the record is actually declined)???
The control of the displaying (rendering) of the date is set via the Conditions / Condition Type: Value of Item in Expression 1 = Expression 2
Expression 1 = P205_STATUS_CD and Expression 2 = L
Does this shed any light???

Port number from 7777 to 8080 - URGENT please

dear all,
i'm using Apex 2.2,
i wanted to change port number from 7777 to 8080,
due to Security Reasons, i have to change the port from 7777 to 8080
in which File i need to do the Changes & what are the Steps to be Followes,
http://10.33.20.6:7777/pls/apex1/apex
i wanted to change the same to
http://10.33.20.6:8080/pls/apex1/apex
please Help me out in this,
its is Very URGENT PLEASE
Many thanks

This is unlikely to be any help becaue your URL specified 'pls' in the path indicating that you are using mod_plsql, but but you might like to check that you are not inadvertently servicing your Apex instance with the embedded PL/SQL gateway.
Check to see if you are using EPG with the simple sql :
SELECT DBMS_XDB.GETHTTPPORT FROM DUAL;
If value returned is 7777 then you appear to be using EPG.
Change the port using EXEC DBMS_XDB.SETHTTPPORT(8080);
And then navigate your http://10.33.20.6:8080/pls/apex
As I said it's unlikely to be any help but wort checking all the same.

Using JSPs to process text - use MockHttpServletRequest?

I'd like to use a JSP file to define and render the body of an email message. I don't want to use this to process an actual Http request, but instead invoke it manually, get the output as a string and then send an email message using the string as the message body.
Does there already exist a convenient way to do this? So far I haven't found one.
The only approach I can envision now is one using MockHttpServletRequest and Response etc. to 'fake out' the JSP to think it is being called in the context of a regular request. Then use whatever object Tomcat uses to render the JSP and store the output.
Anyone done this before or have any suggestions?

Is there a reason you don't want to process an actual http request?
The easiest way is to use the existing interfaces and do actually that.
You can use the java.net classes to make an http request, and get an input stream of the result. This works f you are running this from an application.
If you are in a servlet/jsp you can use the request dispatcher to invoke an include, passing it a mock response object that buffers the output.
Also with javamail you can specify a URL datasource for the body of a message, which tells javamail to get the message at that URL. In that case, it becomes almost a no-brainer.

Changing port number for mobile server after installation

hi,
i am using windows 2003 server release 2,oracle 11g database R2 and oracle database lite 10g R3. i have installed mobile server successfully with port 80 but when i start the mobile server i receive an error stating that the port 80 is already in use. Now i need to change the port number of the mobile server. can anyone tell me the solution.

If the Oracle Lite installation type is STANDALONE , then to change the Olite port number to any other available free port number , you have to edit the file default-web-site.xml or http-web-site.xml file present in $OLITE_HOME/mobile_oc4j/j2ee/mobileserver/config directory.
You can change the port any time in http-web-site.xml file and bounce the services, the new port will take effect.

Given raw IP and port number,create a scoket.

Dear All,
Given a raw IP number 126.124.35.41 and port number 1950,how to create a socket? I am going to use
Socket s = new Socket(InetAddress address, int port)
I know the key is to use raw IP to create a InetAddress. But how?
Thanks a lot.
Kevin

By the way, if you like to get InetAddress, you can do it by
InetAddress address= InetAddress.getByName("126.124.35.41");

Server 2012 R2 SMB - The process cannot access the file '\\server\share\test.txt' because it is being used by another process.

Hi,
We are having issues with Server 2012 R2 SMB shares.
We try to write some changes to a file, but we first create a temporary backup in case the write fails. After the backup is created we write the changes to the file and then we get an error:
The process cannot access the file '\\server\share\test.txt' because it is being used by another process.
It looks like the backup process keeps the original file in use.
The problem doesn't always occur the first time, but almost everytime after 2 or 3 changes. I have provided some code below to reproduce the problem, you can run this in a loop to reproduce.
The problem is that once the error arises, the file remains 'in use' for a while, so you cannot retry but have to wait at least several minutes.
I've already used Process Explorer to analyze, but there are no open file handles.
To reproduce the problem: create two Server 2012 R2 machines and run the below code from one server accessing an SMB share on the other server.
Below is the code I use for testing, if you reproduce the scenario, I'm sure you get the same error.
We are not looking for an alternative way to solve this, but wonder if this is a bug that needs to be reported?
Anybody seen this behavior before or know what's causing it?
The code:
string file =
@"\\server\share\test.txt";
if (File.Exists(file))
File.Copy(file, file +
".bak", true);
File.WriteAllText(file,
"Testje",
Encoding.UTF8);
The error:
System.IO.IOException: The process cannot access the file '\\server\share\test.txt' because it is being used by another process.

Hi,
There is someone else having the same issue with yours. You could try code in the article below:
“The process cannot access the file because it is being used by another process”
http://blogs.msdn.com/b/shawncao/archive/2010/06/04/the-process-cannot-access-the-file-because-it-is-being-used-by-another-process.aspx
If you wonder the root cause of the issue, the .NET Framework Class Libraries forum can help.
Best Regards,
Mandy
If you have any feedback on our support, please click
here .
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

I have imported contacts from Outlook to Mail and they have synced via iCloud to my iPhone 3GS. I can't get my iPhone to make a call using these contacts but if I dial the number of any of the contacts on the keypad, the call DOES work! Help me please!?

I have imported contacts from Outlook to Mail and they have synced via iCloud to my iPhone 3GS. I can't get my iPhone to make a call using these contacts (it tries but then says call ended) but if I dial the number of any of the contacts on the keypad, the call DOES work! Help me please - is there something I need to do to the contacts because tehy came from Outlook? Thanks

Thank you for replying. Yes I deleted the old email address..

I have an invoice that I paid to use photoshop and now it is asking for serial number however it does not show a serial number when I log in

I have an invoice that I paid to use photoshop and now it is asking for serial number however it does not show a serial number when I log in

Please then use your web Browser address http://www.adobe.com/ and sign in with your Adobe User ID and Password to your account the has your Subscription and use https://www.adobe.com/account/my-products-services.html capture the page which shows you have a subscription like I showed you I have.
Open Adobe Creative Cloud desktop application use the APP tab and capture that scree to show Photoshop is installed and up to date like I did. Capture that screen. Show us you have installed Photoshop and its up to date.
Open Photoshop and use menu Help it should show tha its activated because there will be a menu item Sign Out. If it is Sign In, Sign in using the account that has the subscription the one you used above to Activate Photoshop.

Does facetime use the email address or the phone number to make a call

Does facetime use the email address or the phone number to place a call

Depends on what the receiver has set up on his or her device.
Also depends on the device. iPhone uses the number, iPad, iPod touch uses Email. But can be set up for phone number too if the person has an iPhone.
Hope this helps.
PJRS

What is apple doing about numb fingers using the trackpad on the new mid 2012 macbook air?

What is apple doing with the trackpads on the mid 2012 MacBook Air, that creates numbness and pain in my fingers.

You have no idea what you are talking about catperson. This topic happens to be on one of the
Apple Support Cummunity conversation. It's called,
Hands go Numb, tingle from trackpad-
Do you even have a 2012 or newer laptop? If not, don't give advise as simple as go see a doctor. Will Apple be paying for my medical bills?
Yesterday is the first time my finger got so painful I could no longer work on my project. I iced it to help numb the numbness, usally the pain subsides when I stay off my laptop for hours however when I start working on it the pain returns and you need your index and middle finger to work that laptop. This is the first time the pain had not gone away, 24 hours later. It feeIs like the tip of my middle finger has a giant splinter in it, very sore! I bought the first edition Macbook Air laptop 4 years ago and never had this problem with my index and middle finger, until I started working on my new Air.
Look at how many people are having the same problem. It can not be a coencidence. This problem has cost me the use of my finger and the high expense for this new MacBook Air. I'm going to my apple store tomorrow and show them how many people have this problem with numbness. I think this problem goes way beyond giving me a refund for this computer.
Any thoughts after reading other people having the same painful experience?
So What is Apple going to do with the new MacBook Air trackpad that creates numbness in your fingers?
PS: I know the trackpad is made of glass, so I covered my trackpad with a clear cover they sell to put on iphones however that did not slove anything.

I just tried to use my iphone as modem for my laptop but once i select the iphone at my network connections it ask me for my password, does anybody knows if that information is either my iphone serial number, fcc id, IC, etc

i just tried to use my iphone as modem for my laptop but once i select the iphone at my network connections it ask me for my password, does anybody knows if that information is either my iphone serial number, fcc id, IC, etc

If you are trying to connect via wifi to our iPhone then the password should be displayed on your phone when you go into Personal Hotspot, by default it is a random password set by the phone but you can change it there.

HT3529 When i send a text while using imessage to another iphone user why does my email show up on their phone instead of my number ??????

When i send a text while using imessage to another iphone user why does my email show up on their phone instead of my number ?????? Can somebody please help me !

cfm007,
Welcome to our family. We want you to be able to enjoy all the services we provide and we definitely need to address this. Do you receive/make calls without problems? Are you able to receive messages with your contacts' number? Are you using iMessages? If so, go to Settings>Messages>Send&Receive>only your phone number should be enabled.
AdaS_VZW
Follow us on Twitter at @VZWSupport

How can i take the number of a random process to use it in math´s and show the solution to the user?

i wrote this function and i try to show the number of seconds the user was to early or to late to click the stopbutton to the user.
its about to hit stop intuitiv while in the background ther is a random number already made but the user dont know or see it.
the eyes opens in a random between 100 and 40000 millisec. if they open up the user should click stop without seeing them. so its intuitiv.
i just tryed.
this code is on the mc with the eyes to let them open randomly. it is on the second frame at the main time code. 1st frame is the start button and a small description. on the second the stop button and the closed eyes with the script down here as i already said. and on the 3rd frame is the end wher it should be shown to the user. thats how i tryed. please let me know any suggestions and or other solutions to my problem! If you need to see my flashfile to help me just let me know. i send it to you or something :-)
mic(at)hellrec.at
function randomRange(minNum:Number, maxNum:Number):Number
return (Math.floor(Math.random() * (maxNum - minNum + 1)) + minNum);
var myTimer:Timer = new Timer((randomRange(100, 40000)),1);
myTimer.addEventListener(TimerEvent.TIMER,openeyes1);
myTimer.start();
var duration:uint = getTimer();
function openeyes1(e:TimerEvent):void {
gotoAndPlay (26);
e.updateAfterEvent();

to save the number use:
function randomRange(minNum:Number, maxNum:Number):Number
return (Math.floor(Math.random() * (maxNum - minNum + 1)) + minNum);
var randomNum:Number= randomRange(100, 40000);
var myTimer:Timer = new Timer(randomNum,1);
myTimer.addEventListener(TimerEvent.TIMER,openeyes1);
myTimer.start();
var duration:uint = getTimer();
function openeyes1(e:TimerEvent):void {
gotoAndPlay (26);
e.updateAfterEvent();
p.s. please mark helpful/correct responses.

Node port number :This port is in use.Select another port number-

I am trying to insalled Informatica 9.0.1 Hotfix2 on my personal laptop and getting below error and was getting same error for 8.6.1, Si i have uninstalled it
Node port number :This port is in use.Select another port number
I have tried passing different no like 6005,6006,6007,6008.... but for all it giving me the same error.
Can any please answer where i can check that which port system is using and what the available values?
OS: Windows 7 Professional
DB:Oracle11g

Hi,
Goto start > run > enter netstat -o command and execute it and it will display all the addresses. In Foreign Address column the entire ipaddress:portnumber will be display and along with this process id(pid) will be displayed. Check whether the portnumbers are being used by any other application or it is in blocked state. If it is in blocked state then kill that process id with taskkill /pid /f command at command prompt.
After doing this you can try to install it one more and let us know whether it got succeeded or not.
Thanks,
Navin Kumar Bolla

DOES EIGRP USE AS NUMBER/process number as it's PORT NUMBER between the routers in the same AS/group?

Similar Messages

Maybe you are looking for