Does Elements no longer recognise your Handycam?

Despite having previously used my Photoshop Elements programme to download and edit from my Sony Handycam, it now comes up with the message 'No DV camera is detected'. Any idea what has happened?

I think you mean Premiere Elements, not Photoshop Elements? (PSE can't edit video.) If so, it's better to ask in the PRE forum, since very few of us here use PRE:
http://forums.adobe.com/community/premiere_elements
Good luck!

Similar Messages

My Mac notebook does no longer recognise my external keyboard which was connected by a USB cable. I have checked the keyboard on other Mac notebooks and it works fine. Any suggestions?

My Mac notebook does no longer recognise my external keyboard which was connected by a USB cable. I have checked the keyboard on other Mac notebooks and it works fine. Any suggestions?

and in some kind of record, I've read another thread an it's fixed!!
Kids.
Accessability-> zoom-> off
5 days i've been squinting!

My elements 11 does not seem to recognise Nikon raw NEF files. Is there A fix available for this.

My Photoshop elements 11 does not appear to recognise Nikon NEF raw files. Is there a fix for this?

Other than upgrading to pse 13, you can use the 8.7.1 dng converter to convert the nikon D750 camera raw files to dng copies, which then pse 11 should be able to open.
Adobe - Adobe Camera Raw and DNG Converter : For Windows : Adobe DNG Converter 8.7.1
how to use the dng converter:
Camera Raw: How to use Adobe DNG Converter - YouTube

Error : Your CPU does not support long mode. Use a 32bit distribution

Hi
I was trying to Install Oracle Enterprise Linux on VM ware version 6.
My hardware is Intel 32 bit.
However while booting from the DVD im getting an error as "Your CPU does not support long mode. Use a 32bit distribution."
Please Advise
Thanks

I had learned that the free DVD sets that Oracle ships are always for 64-bit systems. Owners of 32-bit systems will have to either download from http://edelivery.oracle.com or copy a distribution DVD from a friend. The 32-bit media can also be ordered from the http://oraclestore.oracle.com site for about $20USD.
Sorry for any confusion this may have caused.

When doing catalog backup get message " your system is low on disk space, and elements organizer can

When doing catalog backup get message " your system is low on disk space, and elements organizer cannot perform the operation. If create a catalog with 20 pictures backup works OK. backing up to a 1TB external drive. Have 16705 pictures in catalog. Total disk space for pictures is 192 MB. Why am I getting message?

kdrozzen a écrit:
Total disk space for pictures is 192 MB.
Do you really mean MB (megabytes) or GB (gigabytes) ?
Even if its GB, the free space may be enough, depending on your files size, especially with videos or raw files.
When you start the backup process, it first shows you the total size of the catalog.

Getting error:- Your CPU does not support long mode. Use a 32bit distribution--? on OEL 64 bit host for OEL 64 bitguest

Getting error:- Your CPU does not support long mode. Use a 32bit distribution--?
I am using entire Oracle Stack..OEL, ORACLE VBOX
Trying to install guest OEL 5.6 x86-64 bit on virtualbox 4.3 on a (Dell 2950 Server with host OS OEL 5.6 x86-64 bit) .
and it complains of -->Your CPU does not support long mode. Use a 32bit distribution
I am struck and unsure how to proceed . I appreciate any help regarding this.
I enabled the VT (Virtualization Technology) option in the BIOS and then gave it a try. Does not work?

Hi
Looks like the 64 Bit operating system is not supported. Enable the VT (Virtualization Technology) option in the BIOS and then give a try again.
Edited by: 891882 on Oct 28, 2011 1:21 PM

HT4060 How long does it take to charge your ipad once the battery is all gone?

How long does it take to charge your ipad 4th generation with retina display once the battery is all gone?

About 5 hours using the 12W charger that came with it.

Solution .Itunes does not recognise your your burner

If itunes does not recognise your burner, look in (my computer) if you have more drive than you actually have.if this is the case, you have a logical drive. You must go in your control panel and disable it. When you will try to burn .Itunes is gonna see your burner and ask you if you want to use it .

I also have a similar problem.
I have an 80g. Library was in fine working order.
Now, I had my computer wiped out, with a new itunes library.
I want to transfer my ipod music to my itunes library, but all of the programs to help me do this will not recognize my ipod, even on disk use and manual settings.
What do I do without clearing my ipod music?

Ipod touch generation 5. Disabled, no luck restoring and is no longer recognised.

Kids disabled it, I have tried restoring but it made me download an update first by which point it decided my Ipod was no longer recognised by my computer and still won't recognise it. I tried turning it off, then connected the usb, held down the power button for 3 seconds, then at the same time held the home button for whoever many seconds, then let go of the power button and continued holding the home button for whoever long it told me too in the info I managed to find online. Any other advice please?

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. Try a couple of times since timing is critical. The iPod will be erased.
iOS: Forgot passcode or device disabled
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Try another cable
Try on another computer
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

HP Envy 120 All in One Printer no longer recognises MacBook Air

Since upgrading to Yosemite, my HP Envy 120 no longer recognises my Macbook Air and vice versa via the router, having worked previously (not perfectly all the time admittedly but connection wasn't an issue). I can connect Macbook to printer via HP direct, but this means disconnecting from the internet, scanning, then re-connecting to internet which is a bit of a faff and seems a backwards move.
I have downloaded the latest HP printer driver software, followed all suggestions I can find on this such as deleting the printer on the Macbook under system preferences, but when I try to add it back on, nothing shows. I've tried adding the IP address manually, this comes up with an error message. I've done the wireless wizard on the printer and that was successful so it is connected to the router but is not detecting my computer, which is also connected to the same router.
The printer is still under warranty - I meant to take it back when I had earlier problems but decided to stick with it a bit longer. I'm just trying to work out - is it a HP problem or is it an Apple problem - ie can I return the printer under the warranty?
Or does anyone have any simple fixes? I'm not at all computer literate!
Many thanks!
This question was solved.
View Solution.

Hi,
As you mention that you do able to use the printer with no issues by using HP Wireless Direct, that means that this is neither HP or Apple issue but a network connectivity issue.
Apple devices uses Bonjour to communicate with the printer, that relies on IP Muticasting which need to be supported by your router.
If I clearly understood your description and the device do work as expected using HP Wireless Direct, the router is the cause for this issue as you do not see similar issues while removing the oruter from that acquisition... please also let me know if i have misunderstood your intention about the issue.
Additionally, have you tried rebooting your router by unplugging its power for 10-20 seconds? once it starts up reboot both the printer and then Mac and check for any difference..
Please try that and check if that help. if the issue persists do let me know your router brand and model, its settings or capabilities may cause a such and may prevet this kind of connectivity.
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Why does my iPod not recognise my passcode on restrictions passcode page

The passcode for my iPod is no longer recognised when I try to open the restrictions page in the Settings app. How can one device have 2 passcodes ? Do I have to wipe the device and start again ? How do I know it will not happen again /

There is the normal Lock Screen passcode and there is a Restrictions passcode. They are each different. We don't know your passcode nor does Apple. If you forget the passcode:
Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
A
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
7. iOS - Unable to update or restore
Forgotten Restrictions Passcode Help
iPad,iPod,iPod Touch Recovery Mode
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
Also, see iTunes- Restoring iOS software.

Bluetooth module no longer recognised in Mac Pro

My Mac Pro's been doing some strange things recently.
A couple of days ago I noticed things were running very slowly, just moving windows about they would jerk and jitter.
Tried hardware test, disk utility etc but no problems found. I then unplugged the machine and plugged it back in - problem solved.
Now today I started up the machine, go to login to my account and my keyboard and mouse don't work. They become initialised if I unplug and plug them back in, or if I wait about a minute they start working.
Along with this, my bluetooth module is no longer recognised under Mac OS X, although when I reboot my machine into Vista the module is recognised and functions correctly.
It also takes over minute to shut the machine down, which it has never done before. When turning it off the OS seems to quit quickly, but the screen remains black for a long time before the power is cut the the drive etc. (This is especially noticeable when restarting the machine as it takes more than twice what it has done in the past).
Is this all just coincidence that these things happened at the same time, or are they related?

Have you tried the standard debugging steps listed in the troubleshooting guides here and elsewhere?
You might try looking at http://www.thexlab.com and other websites like that for information about how to debug various problems.
If you are OK with opening your case, you can also reset the SMC controller on your motherboard, which can affect at least some of the subsystems you are having trouble with.
But first, you need to do more general diagnostics.
Run your MacOS hardware diagnostics by putting your OS boot CD in your optical drive, and hold the D key down when you boot.
You can also hold down C when booting and when the installer appears, go to the menu and run Disk Utility, and verify at least your primary drive.

Does Elements 12 support Raw files from Nikon D610

Does Elements 12 support Raw files from Nikon D610

Yes, as long as you update your camera raw plug-in (ACR) to version 8.3 using Help / Updates… in the PSE Editor.

Why does elements 11 not recognize nikon nef files

I have been using Elements 11 for quite a while for Canon Raw files with great success. It really works fine for me.
I recently bought a Nikon D300. For some reason Elements 11 will not recognize the Nikon NEF raw files.
W H Y ? ? ?

Thank you for your reply.
Answers to your questions:
I am using Win7 64 bit. Elements 11 has worked just fine until I attempted to process NEF files.
I always copy files to my HD before trying to process any.
How do I check to see if my Camera Raw module is current? EVERY time, regardless of day of the week or time of day, when do the Help/Update thing I ALWAYS get that message block about website is busy, try again. I'll bet I've tried it over a hundred times over the past two weeks or so. I have a feeling that it can't be that busy for that long. Or, maybe I'm just unlucky, or maybe your server is too small to handle the load.
Needless to say, I am really frustrated with Adobe.
Again, thank you for your reply, and hopefully my answers will provide a solution.
Regards,
ChuckWagner
R_Kelly <[email protected]> wrote:
R_Kelly created the discussion
"Why does elements 11 not recognize nikon nef files"
To view the discussion, visit: https://forums.adobe.com/message/6643873#6643873
>

Burnt DVDs no longer recognised on my mac

Recently, my internal drive is acting up. It no longer recognises burnt DVDS. they don't show on the screen and then they just self eject.
Also, when I insert a burnt CD, it is not always recognised on the desktop.
I'm using 10.7.5. Any suggestions?

Hi imnokid2,
Welcome to the Support Communities! The resource below will explain how to check your optical drive if it is not recognizing your DVDs. Does it have any problem reading/playing store-bought DVDs? What software are you using to create the DVDs?
Get help with the slot-loading SuperDrive on your Mac computer - Apple Support
http://support.apple.com/en-gb/HT201788
Accepts discs but they don't mount or are automatically ejected
Reset the System Management Controller (SMC).
Ensure your drive can read the specific type of disc being used. The System Profiler or System Information may provide additional information regarding what media your computer supports.OS X Lion v10.7 and later: Click the Apple () menu and then hold down the Option key. Choose System Information from the menu.
If the disc continues to not be recognized, contact Apple or an Apple Authorized Service Provider, or make an appointment with an Apple Retail Store.
I hope this information helps ....
- Judy

Does Elements no longer recognise your Handycam?

Similar Messages

Maybe you are looking for