Does EM GC support portal?
We have a legacy monitoring product that is deployed on WLS as well.
If we can embed it into EM console frame as a portalet, our Manager server will be reserved so that we can save our development effort.
My question is that does EM GC support portal technology or does EM team have a plan to support it?
Regards,
Yu Wang
The Enterprise Manager Extensibility Kit (EDK) does not provide support for directly embedding portlets, so the answer is no. However, the EDK (doc located here http://docs.oracle.com/cd/E24628_01/doc.121/e25159/toc.htm) as well as metric extensions (located here http://docs.oracle.com/cd/E24628_01/doc.121/e24473/metric_extension.htm#autoId0) do allow you to pull information from a wide variety of sources, which may get you what you need. I hope that helps.
Similar Messages
-
Does Oracle WebCenter Interaction portal version 10gR3 support IE8?
Does Oracle WebCenter Interaction portal version 10gR3 support IE8?
Does Oracle WebCenter Interaction portal version 10gR3 support IE8?
-
Does Solution Manager support Service Report for non-abap?
Does Solution Manager support Service Report for non-abap?
We can schedule and view reports for ABAP but for all the non-ABAP such as J2EE stack (PORTAL) we can not pull out a report.
If the answer is yes please let me know where I can get the documentation of how to setup SLA for PORTAL or non-ABAP.
I found a document on EWA non-abap but non for SLA.Hi
actually i am in task of setting up ewa for portal.
i had already done with abap components (ewa and sla)
i stronly believe one of the pre-requiste to get sla is EWA.
so i think if u can setup ewa for portal then you can get sla too.
Regards,
Vijay. -
SubscribeNet vs. SAP Support Portal
Okay, I purchased a new license from TechXtend. They were good about calling me until they got my credit card. Now they are radio silent.
Where would I see that new license? I logged into the SAP support portal but I can't figure out where to go or what to do. Awful.
I logged into Subscribenet and I still see my licenses there and it appears that I could check them out. But I don't see the new license
I think the SAP Support Portal should just be called the SAP Confusion Portal. Never have I seen so much crap that doesn't apply to me pushed into one page. Seriously, it sucks.
Can I still use SubscribeNet to manage my licenses? Is there a place to manage the licenses in the SAP Confusion Portal? I clicked on Licenses and then I have to search a installation. I only see my two licenses, not the new one. So is something bogged down somewhere? I tried to check in one of my existing licenses and then I was prompted for a user id and password again must have done something wrong because I got sent to jail and now I have to pay $200.00 to get out.
Awful.Thanks Chris.
That is the way that I would have preferred to do it. I am now waiting a full three business days for the license. Funny, you can buy direct, but I cannot. I guess I must have pissed of Sue Dunnell with one of my previous posts because she was the one to tell me that said that only customers can go direct to SAP, but I would have to go elsewhere. Odd that most people here, including myself have been using the product since the early 90's. What does make a customer Sue?
And I still have no definitive answer on using SubscribeNet. It still shows my old company name and that one of my licenses is associated with a server that no longer exists while the other license is correctly associated with my workstation that did not exist previously.
I suspect they goofed up the migration.
Paul -
Hi,
Does UD Connect support ODBC natively? If not, is there any way to work around the limitation?
Regards,
Frankhi,
go through these docs...i hope they may helpful in giving some info to U...
[https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/4841dd90-0201-0010-b4af-e531993b3e48]
[https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/11e1b990-0201-0010-bf9a-bf9d0ca791b0]
regards -
Does PI (XI) support EDI transactions?
Does PI (XI) support EDI transactions?
What additional infrastructure does a customer need to have in place to support the use of EDI?
For a customer that does not have this infrastructure in place is there a better alternative?Hi,
Yes..by using seebergur adapter we can do the EDI transactions.
/people/bla.suranyi/blog/2006/06/08/sap-xi-supports-edifact
/people/william.li/blog/2006/03/17/how-to-get-started-using-conversion-agent-from-itemfield
/people/paul.medaille/blog/2005/11/17/more-on-the-sap-conversion-agent-by-itemfield
http://www.stylusstudio.com/edi/XML_to_X12.html
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b0b355ae-0501-0010-3b83-8f2bb566fa47
Details on XI EDI adapter from seeburger
/people/bla.suranyi/blog/2006/06/08/sap-xi-supports-edifact
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
SAP Adapters
EDI with XI
http://www.seeburger.com
http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/SEEBURGER_SAP_Adapter_engl.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
http://www.sap.com/asia/company/events/nwtechdays/presentation/australia-slides/Pre-Built_Integration.pdf
http://www.seeburger.com
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
EDI Adapter by SeeBurger
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/206e2b65-2ca8-2a10-edad-f2d1391644cb
B2B(EDI) Integration using SAP Netweaver XI and Seeburger AS2 Adapter
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/00f9cdf5-d812-2a10-03b4-aff3bbf792bf
Integrating XI with SeeBurger
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6dc02f5d-0601-0010-cd9d-f4ff9a7e8c33
AS2 vs OFTPS:
AS2 & OFTPS
Regards,
Soumya -
Hi,
I am using NW04 and has deployed a repository manager, which uses axis2.0 for web service. In my code I used javax.xml.namespace.QName(String, String, String). However, in my EP, it loads QName.class from jaxrpc.jar from usr/sap/sysid/jc01/j2ee/cluster/server0/bin/ext/webservices_lib, which only has QName(String, String). As a result, error occurs.
My question is, does NW04 EP supports axis2.0?
If not, where can I put my xbeans.jar, which has javax.xml.namespace.QName(String, String, String), so that the classloader of EP can load this correct QName.class first, rather than the one from jaxrpc.jar in /server0/bin/ext/webservices_lib?
Thanks,
RayHi Ray,
I'm trying to concume a web service deployed in NW04s server in a Java application. I'm using Axis1.4 SOAP engine. As NW04s requires authentication its throwing some exception as below, How can we make Web services to be accessed in non SAP application? Please help
faultCode: Server
faultSubcode:
faultString: The User Authentification is not correct to access to the Portal Service com.sap.portal.prt.soap.PortalUMEService or the service was not found.
faultActor: [A2SR00001] com.sapportals.portal.prt.service.soap.exception.SoapFaultHandler
faultNode:
faultDetail:
error_IllegalAccessError:<type xmlns="">java.lang.IllegalAccessError</type>
The User Authentification is not correct to access to the Portal Service com.sap.portal.prt.soap.PortalUMEService or the service was not found.
at org.apache.axis.message.SOAPFaultBuilder.createFault(SOAPFaultBuilder.java:222)
at org.apache.axis.message.SOAPFaultBuilder.endElement(SOAPFaultBuilder.java:129)
at org.apache.axis.encoding.DeserializationContext.endElement(DeserializationContext.java:1087)
at com.sun.org.apache.xerces.internal.parsers.AbstractSAXParser.endElement(Unknown Source)
at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanEndElement(Unknown Source)
at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl$FragmentContentDriver.next(Unknown Source)
at com.sun.org.apache.xerces.internal.impl.XMLDocumentScannerImpl.next(Unknown Source)
at com.sun.org.apache.xerces.internal.impl.XMLNSDocumentScannerImpl.next(Unknown Source)
at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanDocument(Unknown Source)
at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(Unknown Source)
at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(Unknown Source)
at com.sun.org.apache.xerces.internal.parsers.XMLParser.parse(Unknown Source)
at com.sun.org.apache.xerces.internal.parsers.AbstractSAXParser.parse(Unknown Source)
at com.sun.org.apache.xerces.internal.jaxp.SAXParserImpl$JAXPSAXParser.parse(Unknown Source)
at javax.xml.parsers.SAXParser.parse(Unknown Source)
at org.apache.axis.encoding.DeserializationContext.parse(DeserializationContext.java:227)
at org.apache.axis.SOAPPart.getAsSOAPEnvelope(SOAPPart.java:696)
at org.apache.axis.Message.getSOAPEnvelope(Message.java:435)
at org.apache.axis.handlers.soap.MustUnderstandChecker.invoke(MustUnderstandChecker.java:62)
at org.apache.axis.client.AxisClient.invoke(AxisClient.java:206)
at org.apache.axis.client.Call.invokeEngine(Call.java:2784)
at org.apache.axis.client.Call.invoke(Call.java:2767)
at org.apache.axis.client.Call.invoke(Call.java:2443)
at org.apache.axis.client.Call.invoke(Call.java:2366)
at org.apache.axis.client.Call.invoke(Call.java:1812)
at PortalUMEService.service.bkc.com.service.ComSapPortalPrtSoapPortalUMEServiceBindingStub.getProperty(ComSapPortalPrtSoapPortalUMEServiceBindingStub.java:114)
at PortalUMEService.service.bkc.com.service.TestPortalService.main(TestPortalService.java:29) -
Does visual composer supports Webservices
Hi
we are planning a project for EP_Xi integration.where XI exposes it's functionality as webservice.from EP side it should consume this webservice and display it as an iview.now i have following 2 options
1.i am planning to write webdynpro application and consume this webservice and display it as iview in portal
2 way:does Visual composer supports webservices?if yes can i replace webdynpro?which is best way to this ?Hello:
I just wanted to find out if there is a way directly to integrate Web Services with BW's front end tools i.e. Bex/ Web, without loading the data in InfoCubes/ODS
The Requirement is to extract and display data on Bex/Web, from a legacy system using Web services.
Again we are not planning to load data in the Info cubes or ODS.
Any input will be highly appreciated. -
Does Palm Pre Support Bluetooth SPP Profile?
I am a developer for a software company. I write all the application software mainly for Windows Mobile to control our hardware in the field using Bluetooth SPP Profile, or Serial Port over Bluetooth. Some clients have asked if they can use their Palm Pre phones to control our hardware.
Does Palm Pre support SPP?
Post relates to: Palm IIIcAt this itme the PRE does not support the SPP profile.
These are the profiles currently enabled on the PRE;
HSP 1.1, HFP 1.5, PBA, A2DP, AVRC, PAN
version 2.1+EDR
For reference purposes, click on the following link for the support page for your device on the kb.palm.com webpage.
http://kb.palm.com/wps/portal/kb/na/pre/p100eww/sprint/home/page_en.html
There are links on the page to the user guide, troubleshooting, how to's, downloads, etc. -
Does Alertframework (ALM) support the SAP Office (Inbox)?
Hi,
The alerts are polled from the UWL of the Enterprise Portal, application-specific display programs, or the alert inbox. These display programs can be personalized due to the useru2019s needs. In addition, the users can receive alerts as e-mail, SMS, and fax, if these external methods of communication are configured in SAPconnect. End users can personalize their alert notifications, for example, create notification variants or determine a substitute.
Integration
Besides Email, can ALM send the notification to receivers' Inbox?
How?
Thanks,
Miaoanother question:
Does the ALM support the function to set email "sender" dynamically?
From the API, it is no. I'd like to know if there is any possibility with other methods?
Thanks,
Miao -
Under what category is the CML download from the support portal?
I am unable to locate the CML downloads from the cisco support portal. What category is this located in?
It seems like the marketing teams need to have a meeting and decide what kind of product this is. Here in the support forums the product is listed under Network Infrastructure. On the cisco.com site it is listed under Cloud and Systems Management.
I have a valid license and support contract incoming, I just can't find the media download location. Thanks for any help.I was able to work with TAC to get the edelivery email that included the OVA file. How are you all going to handle product updates if there isn't any way to download the software from the normal support download tool?
Another question I have now that I have the environment running is where do I download the client software? I expected to see a download link somewhere on the User Workspace Management portal, but don't see anything.
So far I have been a little disappointed with the lack of clarity in the documentation on simple things like this. The documentation does a good job of instructing how to modify the .vmx file to get the nested hypervisor working (something that the end user shouldn't have to do, this should be handled in the OVA before it is delivered to the end user).
I also feel that there needs to be a little more discussion on the deployment options for this software. We are initially just wanting to run the simulations sandboxed with no connectivity to our corporate network except through the management interface for user connections. I don't think we need the FLAT and SNAT networks for this, but if we do, I am confused because the documentation is poor.
So now I have a server deployed, but no way to actually run simulations since I don't have any client software. -
How to log a query or ticket to SAP on SAP support Portal - need process
Dear All,
I got SAP support portal user id and password. Can anybody guide me how to log a ticket or query on some issue to SAP.
Pls let me knwo how to search help notes to. Explain me in steps pls.
Need urgent help.
Thanks
SunnzyHello exper,
Can you tell me that incase i have to log a request for a client server then how i will do that.
I am simply facing a problem in PPOME transaction where a tab for IT 1005 planned compensation has been added but it is not showing any input fields there. However we tried the same configuation in Sandpit server and it is working fine.
Incase i have to log this is to SAP for help, do i have to follow the same path to do it.
thanks
Sunny -
What type of HDD does MS-6382 support?
Hi,
My system has a MS-6382 mobo & I've got to change to the hard drive. I've been looking at ebay & the link below describes a HDD which has "ATA/133 or SATA interface and capacity of 120 GB"
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&category=16178&item=5208766733&rd=1
I don't know much about computers, or even the right questions to ask really, but does the 6382 support 7200rpm drives, ATA/133? What general specs for a HDD should I be looking for?
I would be grateful for any help anyone can give!
Here is some info on my current HDD:
HD Tune: ST380020A Information
Firmware version : 3.39
Serial number : 5GC0KMYD
Capacity : 73.1 GB (~78.5 GB)
Buffer size : 2048 KB
Standard : ATA/ATAPI-6
Supported mode : UDMA Mode 5 (Ultra ATA/100)
Current mode : UDMA Mode 5 (Ultra ATA/100)
S.M.A.R.T : yes
48-bit Address : no
Read Look-Ahead : yes
Write Cache : yes
Host Protected Area : yes
Device Configuration Overlay : yes
Automatic Acoustic Managment : yes
Power Managment : yes
Advanced Power Managment : yes
Power-up in Standby : no
Security Mode : yes
Firmware Upgradable : yes
Partition : 1
Drive letter : C:\
Label : MR01-G4
Capacity : 74822 MB
Usage : 17.54%
Type : FAT32
Bootable : Yes
JorolatQuote from: Wonkanoby on 19-June-05, 21:26:02
ata 133 is just a marketing gimick.............only data moves that fast is 2mb in the drives cache
the drive will run at about half that speed once the cache is cleared
dont worry about it
Er, I got another question
I'm now looking at this hitachi model:
http://www.cclonline.com/product-info.asp?id=210&pc=dealtime#
which has good reviews (probably for others in the range). I originally saw it on ebay but it turns out to be cheaper buying it from the above supplier.
The question I have is does the MS 6382 support serial ATA? I'm reasonably sure that the above drive is parallel ATA (ie compatable with the MS 6382) because of the manufacturer's info here:
http://www.hitachigst.com/hdd/support/d7k250/d7k250.htm
but I thought I'ld ask before I order it or in case I change my mind (again).
Thankyou for your help
Jorolat -
Customer Support Portal to report problems is not working
The Customer Support Portal at: https://www.adobe.com/cfusion/support/index.cfm?event=portal&loc=en_us
Is not working.
I called into installation help. The person said he could not help me and I needed to report the problem through the Customer Support Portal.
When I go there I sign in.
I select Installation Help
I select Your Products
A drop down box appears
It says Select Your Product.
The problem is it doesn't show any products to select.
Thanks,
Docfxit
PS: How can I report an installation problem to the developers?Hi Docfxit
What product are you trying to install? Acrobat? Reader? PhotoShop? LiveCycle........? Are you an enterprise customer?
If you are an enterprise customer you should have been given an email address for support
If not you can always post the questrion on the forums and we'll try to help from there.
This forum is for the online service hosted at Acrobat.com
The forum for the desktop application Adobe Acrobat (Standard / Pro / Pro Extended) is http://forums.adobe.com/community/acrobat
Tai -
Does lion server support a single email address across multiple devices??
I am looking to move from an outdated Microsoft Exchange Server 2003 to OS X Lion Server but I am unsure as to how Lion will handle email. I do not want to spend money on a new windows server if I can get a Mac Mini Server to do the job. I am a very small business with a number of email accounts for a couple employees and need access to email and calendar from both the office iMac's and my Macbook Pro when on the road. My IT guy says I need Exchange but he's been off base on a few other items recently and I wanted to check with other sources.
I have 2 new iMac's, a MacBook Pro, an iPad1 and and iPhone4 on the mac side of things and 2 windows computers running XP. I would get rid of the windows computers completely if not for my CAD program which runs best not in a virtual machine mode.
How well will email and calendar entries sync across devices?I have a very similar setup at my office. Lion Server will push email, calandar, contacts to all of your apple product with out a hitch.
As far the Windows XP machines, you can access email over IMAP with Thunderbird, and calandars via sunbird or the built in web app.
I would ditch the exchange server move to Mac OS X Server, and never look back.
God Luck!
PS. All of your devices will be in sync all the time.
Shore answer:
Does lion server support a single email address across multiple devices??
Yes.
Maybe you are looking for
-
I have a MAC. If you can help me please be detailed and patient... I don't know what I am doing!
-
Strange clicking sound on my Lumia 930 arround the...
When my camera is not activated, if I mildly shake my Lumia 930 I can hear a strange clicking sound on the upper part of the device, just arround the camera lense. Can it be the lenses just shaking, because when the camera is activated that sound di
-
Is there protection from viruses and hackers that you can put on IPad 2?
Is there a protection program against hackers and viruses for Ipad2 ?
-
Installing windows 7 on bootcamp questions?
So because I'd like to be able to play a few games on my iMac, I've decided to install windows 7 in bootcamp and have it as a second operating system to use when I play games. However, I have some questions. 1) In every tutorial I've seen, at some po
-
Backout plan for Portal Export/Import
What is the best backout plan while doing the PORTAL export/import? Is cold backup of the Portal instance a good idea?