Does Emagic's AMT (Active Midi Transmission) work with Logic 8?

Is Logic 8 able to utilize Emagic's AMT (Active Midi Transmission) technology as used by it's Unitor 8 & AMT8 midi interfaces? (Similar to Digidesign's Midi Time-Stamping)

it was shown before( as unitor 8 though) but not anymore.
Ok, so it's not installed, and your computer doesn't know about it.
rescan midi doesn't find anything more,
No it won't. OSX can only communicate with an interface through a driver. No driver, no interface.
read somewhere that AMT 8 is not compatible with logic pro, which is odd.
Absolutely incorrect. And mine is working fine with all Logic versions, thank you very much!
Ok, trash you MIDI driver, which should be at:
/Library/Audio/MIDI Drivers/ EmagicUSBMIDIDriver.plugin
Also trash
/Users/you*/Library/Preferences/ByHost/com.apple.MIDI.
/Users/you/Library/Preferences/com.apple.audio.AudioMIDISetup.plist
Reboot. Reinstall the Emagic MIDI drivers from your Logic or GB installer. Reboot.
Check the AMT now shows up in the Audio MIDI Setup utility. If it does, you should be good to go.
Edit: Oh, before you do all that, check that the USB cable hasn't just fallen out..!

Similar Messages

  • Which MIDI keyboards work with Logic Pro x and Yosimite?

    can anyone suggest some midi keyboards that work with Logic Pro x and yosimite

    Hi Jacub,
    I have a 2i4 running Mavericks 10.9.2 on a Mac Book Pro, and my unit works properly, please make sure your run the unit with the class compliant mode app (click the link below):
    http://us.focusrite.com/downloads?product=iTrack+Solo
    Please contact Focusrite support if you have any more concerns.
    Best Regards,

  • Which 61 key midi keyboards work with Logic Pro X (10)? M-Audio, Novation, Akai, Roland???

    Hi. I'm new to this community but would really appreciate some help.
    I'm struggling to find a 61 key midi keyboard which works properly with Logic Pro X.
    I was looking into getting either the M-Audio Axiom 61 or Novation Impulse 61 but all I can find on google etc. is people saying they don't work properly.
    Has anybody got a 61 key which works seamlessly with Pro X?
    Any help would be much appreciated.
    Thanks.

    To "The Art Of Sound"
    Hi. I doing next.
    1. I create new project
    2. I select Yamaha Grand Piano
    3. I play something in "live" mode. All is ok
    4. I play something in "Rec" mode. All is ok
    5. I record second track with the same instrument, with Yamaha Grand Piano. All is ok
    6. I record third track with Yamaha Grand Piano. All is ok again.
    7. Now I muting first or second track and... third track plays wrong notes! I unmute first track, but third track still to play wrong notes! Why???
    Ok. I continue experiment with created project. I have three Yamaha grand Piano tracks and I creating new software instrument and assing Hovering Machine to it. I try to play in "live" mode something. And I get interesting effect. If I play short notes (sixteens, for example), I can play for one minute without problem. And Logic Pro X starts to play wrong notes after this time delay.
    If I start to press chord notes without breaking, Logic  Pro X plays for 15-30 secounds normally and starts to play wrong notes them.
    Well. I turn off all plugins and effects from instruments. But Logic Pro X countinues to play wrong notes!
    I experimented with NI Kontakt 5. Kontakt plays wrong notes!
    I experimented with LUSH-101 plugin and minimoog. This two instruments play correct notes always!!! WHY????
    Why some instruments play wrong notes and other instruments play correct notes in the same project?
    I wrote wrong in my previous post. I got this problem with Logic Pro X 10.0.3 update.
    Actually I have serious problem now. I opened projects created in Logic Pro X early and I have this problem  in ALL projects. This's commercial projects and my partners asked me already about release date... What must I answer?

  • Will my Unitor8 non USB Midi Interface work with Logic Pro 8 (MacOSX 10.5.8

    I just purchased one of these Unitor8 gizmos, but have no way of connecting it with my Mac due to the absence of the USB connection on the MIDI interface. My question is....can I use a RS422 mini-din 8pin serial >>>to USB adapter converter, and will the OS and Logic recognize it. Any help would be greatly appreciated.
    Thanks.
    John Bennett
    Logic Pro 8, MacPro 8 core Xeon, M-Audio ProFire 2626.

    The problem is not the reliability of the adapter (they're just fine), but that the Midi driver doesn't look for such an adapter. It won't work. The only chance to get your interface to work is to buy one of the emagic interfaces that came with both USB and RS port and to chain them up.
    Cheers,
    Jazz

  • Does the "Mini DisplayPort to VGA Adapter" work with all Samsung tv models?

    Does the "Mini DisplayPort to VGA Adapter" work with all Samsung tv models?

    It's a VGA adapter. Nothing special about that. If your Samsung monitor supports VGA then it will work.
    But why not go completely digital and use a Mini DisplayPort to HDMI adapter to skip the analog conversion? It also supports passing audio over HDMI.
    About Mini DisplayPort to HDMI adapters

  • I have just purchased a new iMac OS Xlion version 10.7.3 and I'd like to install Windows. I have a disc for XP but the Boot Camp Assistant manual only refers to Windows 7. Please does anyone know if it will it work with XP.?

    I have just purchased a new iMac OS Xlion version 10.7.3 and I'd like to install Windows. I have a disc for XP but the Boot Camp Assistant manual only refers to Windows 7. Please does anyone know if it will it work with XP.?

    Get a Virtual Macine software program, Parallels, VMware Fusion or VirtualBox, and install XP in a virtual machine.
    You can't install XP in a Boot Camp Partition with Lion or Mt Lion, only Win 7.

  • Does oracle jdbc driver 9.0.1 work with sdk 1.4?

    Hi All Experts...
    Does oracle jdbc driver 9.0.1 work with sdk 1.4.1? Ever since i have moved to 1.4 i am having problems. I keep getting the No Suitable Driver error or NoClassDefFoundError. I have everything in the classpath and i have also tried command line but to no avail. The JVM just refuses to pick up the classes12.zip file from the classpath.
    The oracle site mentions that the 9.0.1 driver is for jdk 1.2 & 1.3 but it does NOT mention that it is NOT for 1.4.1. The site very explicitly mentions that the 9.2 driver is for 1.4.1. SO i am a little confused.This question may be stupid, but nevertheless,If i have to upgrade my driver from 9.0.1 to 9.2 then does that mean that i have to upgrade my DB as well?
    Experts..please help.. THanks

    Thanks a lot, as usual, MOD.
    Now only if i can get my JVM to pick up the classes12.zip file from the classpath. I dont know if you read my previous posting today.

  • Does adobe creative suite 4 design premium work with windows 8

    does adobe creative suite 4 design premium work with windows 8

    yes, though you may need to use compatibility mode to install it.

  • What audio/midi interface works with new iMac 2014

    What audio/midi interface works with new iMac 2014. new imac only has USB3 and Thunderbolt.

    Thanks for the info.
    I have two MOTU 8pre's would these work with the Thunderbolt to Firewire adaptor?

  • Does the QT MPEG2 Playback Component install & work with QT X ?

    I am installing a new iMac with Snow Leopard.
    Does the QT MPEG2 Playback Component install & work with QT X ?
    (btw, I have already done the optional install of QT7 from the SN DVD).

    Does the QT MPEG2 Playback Component install & work with QT X ?
    I cannot get "muxed" MPEG2 content (e.g., VOB) file to load in QT X but both QT 7 Pro (with usual audio limitations) and MPEG Streamclip still function normally under Snow Leopard. (Since I don't normally use QT X, I had to actually run a quick test to see what would happen and haven't really performed any real tests. So take my comments with a grain of salt at this time.)
    with such files on my PB Pro.

  • ITunes recognizes my device but the device does not show up for me to work with.  Any idea where I go to access to device in iTunes.  Going to File/Device is greyed out.

    iTunes recognizes my device but the device does not show up for me to work with.  Any idea where I go to access to device in iTunes.  Going to File/Device is greyed out.

    I think this article will help you.

  • Does the Wacom Intuos Creative Stylus 2 work with Adobe Draw

    Does the Wacom Intuos Creative Stylus 2 work with Adobe Draw?

    IP,
    I believe you should ask over here:
    Adobe Illustrator Draw

  • Does anyone have an Android phone that works with the hands free on a 2015 Honda Civic EXL -Nav?

    Does anyone have an Android phone that works with the hands free on a 2015 Honda Civic EXL -Nav?   I don't care about the HondaLink- just the hands free phone call/receive.

    My 5 starting doing this today....constant rebooting and or shutting off even after restoring to new phone.  Would love some impu!!

  • Does the new command 2 binary format work with Apple Push Notification Service? I receive an invalid response status code of 128.

    Does the new command 2 binary format work with Apple Push Notification Service? I am sending 2 messages with the same payload to 2 different devices. None of the messages display on either of the devices. It seems that at least 3 should have been displayed. For my first device, I received a response with an invalid status code of 128 and the message identifier is 2 indicating that the first message was OK. However no message was displayed on the phone. For the second device, I did not receive any error response, but no message was displayed on the device.
    Does ANS perform any validation on the message identifier? The Local and Push Notification Programmin Guide says the message identifier is:
    An arbitrary, opaque value that identifies this notification. This identifier is used for reporting errors to your server.
    I know that the device tokens are valid because the same tokens work when I use the legacy basic or enhanced formats. The phones display the messages correctly when I send to ANS using the old ANS message format.
    Here is the data and the response:
    Sent to ANS: 2 0 0 0 158 1 0 32 120 107 166 143 171 157 143 169 70 135 12 135 246 142 64 224 244 44 116 4 154 65 115 192 206 28 189 56 174 0 172 16 2 0 23 123 34 97 112 115 34 58 123 34 97 108 101 114 116 34 58 34 65 66 67 34 125 125 3 0 4 0 0 0 2 4 0 4 83 7 119 141 5 0 1 5 1 0 32 120 107 166 143 171 157 143 169 70 135 12 135 246 142 64 224 244 44 116 4 154 65 115 192 206 28 189 56 174 0 172 16 2 0 23 123 34 97 112 115 34 58 123 34 97 108 101 114 116 34 58 34 65 66 67 34 125 125 3 0 4 0 0 0 3 4 0 4 83 7 119 141 5 0 1 5
    ANS returned an error: 8 128 0 0 0 2
    Sent to ANS: 2 0 0 0 158 1 0 32 4 239 182 26 13 237 170 136 41 243 181 57 120 208 135 19 101 102 212 70 55 244 251 255 160 125 82 9 10 143 72 17 2 0 23 123 34 97 112 115 34 58 123 34 97 108 101 114 116 34 58 34 65 66 67 34 125 125 3 0 4 0 0 0 5 4 0 4 83 7 119 147 5 0 1 5 1 0 32 4 239 182 26 13 237 170 136 41 243 181 57 120 208 135 19 101 102 212 70 55 244 251 255 160 125 82 9 10 143 72 17 2 0 23 123 34 97 112 115 34 58 123 34 97 108 101 114 116 34 58 34 65 66 67 34 125 125 3 0 4 0 0 0 6 4 0 4 83 7 119 147 5 0 1 5
    ANS did not return a response.

    Hello, can you please help me ?
    You specified sample payload here:
    TerrellFromLockhart wrote:
    I finally got this to work. The picture in the Programming Guide is very confusing. The solution was to prefix every message's frame data with command 2 and that messsage's frame data length. Here is a sample:
    ANS frame: 2 0 0 0 77 1 0 32 120 107 166 143 171 157 143 169 70 135 12 135 246 142 64 224 244 44 116 4 154 65 115 192 206 28 189 56 174 0 172 16 2 0 21 123 34 97 112 115 34 58 123 34 97 108 101 114 116 34 58 34 63 34 125 125 3 0 4 0 0 0 2 4 0 4 83 7 199 195 5 0 1 10 2 0 0 0 77 1 0 32 120 107 166 143 171 157 143 169 70 135 12 135 246 142 64 224 244 44 116 4 154 65 115 192 206 28 189 56 174 0 172 16 2 0 21 123 34 97 112 115 34 58 123 34 97 108 101 114 116 34 58 34 63 34 125 125 3 0 4 0 0 0 3 4 0 4 83 7 199 195 5 0 1 10 2 0 0 0 77 1 0 32 120 107 166 143 171 157 143 169 70 135 12 135 246 142 64 224 244 44 116 4 154 65 115 192 206 28 189 56 174 0 172 16 2 0 21 123 34 97 112 115 34 58 123 34 97 108 101 114 116 34 58 34 63 34 125 125 3 0 4 0 0 0 4 4 0 4 83 7 199 195 5 0 1 10
    About to read response at Thu Feb 20 15:40:20 CST 2014
    SocketTimeoutException
    2 - is clearly command
    0 0 0 77 - frame length
    1 - item Id
    what's 0 32 ? According to this page https://developer.apple.com/library/ios/documentation/NetworkingInternet/Concept ual/RemoteNotificationsPG/Chapters/Commu…
    Item id  should be followed by item length. But item length is obviously greater than 32 because device token's length is 32. Can you please explain why 0 32 were used? and do you have any insight on item id meaning ?

  • How does lion work with logic 9.1.4?

    how does lion work with logic 9.1.4?

    Greetings,
    So far, everything seems as stable as before.  Which doesn't actually mean its rock solid, but otherwise workable.  I'm running a Focusrite Saffire Pro 24DSP with beta audio drivers.  So far, everything is running well.  I decided to jump into the 64bit work environment with Logic.  I have yet to encounter huge problems with the 32bit audio bridge.  Just making sure I bounce everything that is 32bit.
    As for everything else within Logic, I can't say I hate Lion.  Matter of fact, Lion seems buggier than Logic at the moment.  Logic handles well in Lion, but Lion on its own overall is a different can of worms.  I am mixed about a 10.7.1 update.  Usually, it fixes something on the OS, but breaks something else in Logic.
    I have faith that Lion will turn out to be as solid as Snow Leopard.  SL was my favorite OSX so far.  Lion still leaves allot to be desired in terms of stability.
    Again, answer to your question:  for me, Logic and Lion play nice.............for now.
    LGK

Maybe you are looking for