Does Embedded OC4J has a web based admin console ?

Hi
Thank you for reading my post
does embedded OC4J has a web based admin console ?
i tried to open the /em context and it said that the page not found.
if it has no Admin console , it ir t possible to install an admin console for it ?
thanks

Hi,
yes, it has. You need to start embedded OC4J as stand-alone from the jdev-home\j2ee\home using the java -jar oc4j.jar command. You can then launch it and access it via port 8888 and issue
http:://....:8888/em
The embedded server does not use the enterprise manager screen because the configuration is kept in the JDeveloper_home\jdev\system...\j2ee...\embedded...\config directory
Frank

Similar Messages

Cisco Secure ACS 4.2 for Windows web-based Admin Console log in problems

To Whomever Can Assist,
I am running two deployments of Cisco Secure ACS for Windows 4.2 and I can login into the admin web-console just fine. However, when I create a new or test user that mirror my configuration that user cannot login to the admin web-console. The user can login it to devices with the appropriate privileges, but can't administer his/her account within ACS. This has proven very problematic and needs a remedy. Thanks for the assistance.

Bradbryant.dhs,
Where are you creating the new admin user who should have access to ACS web gui under internal users or administration.
Internal user and ACS administrator accounts are completely different.
Adding administrator account
http://www.cisco.com/c/en/us/td/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4-2/user/guide/ACS4_2UG/Admin.html
Regards,
Jatin Katyal
** Do rate helpful posts **

Web based admin pages broken on Mac?

Have new WRT54GL v 1.1, 4.30.7 firmware.
I have noticed intermittent problems with the web-based admin pages, using both Firefox and Safari on the Mac. Odd bit is these don't happen all the time and I'm not sure yet what triggers the problems.
Most commonly seen in Firefox: On the page for basic wireless settings, drop-down menu for selecting the channel will not work. It will display the currently selected channel, but clicking on the menu will either not drop down at all, or it will drop down briefly with no channel selections visible.
In Safari: Many of the drop-down titles and item will shows the intended text prefixed with the word "Capture" or bracketed in "Capture(itemName)." I've seen a few variations on this. Also, many item titles and text are simply missing from many of the pages when viewed in Safari.
Questions (some rhetorical, some practical):
* Anybody else seen these or similar problems?
* Known solutions/work-arounds?
* Does this happen with any browsers on the PC?
* Is there something fundamentally wrong with how WRT54GL's scripting builds these user interface items - or is the problem more related to how the Mac browser handles the rendering?
-Lee

I don't have any problems with this firmware on my WRT54Gv2 using MacOS or Windows and any browser I have.
Those problems are usually either cache problems, i.e. there are some incomplete files in the browser cache.
Could be disabled JavaScript. (It is worth to check the JavaScript error log to see if there is problem)
Could be a hardware/memory problem. Sometimes this happens after a firmware upgrade which did not correctly go through. A re-flash of the same firmware could help then.
The Safari texts you see are normal. There JavaScript works a little different. I have the same on mine. (but I must admit I cannot tell you if I can configure the router with Safari as I have never tried it so far. I usually use only Firefox.)
You can try a PC and see if it is the same there. I guess it is.
Anyway, you are not alone with this problem. I would try to clear the cache, if that makes no difference, download the 4.30.7 firmware and re-flash the router. If that still makes no difference return it to the store if you can and get a replacement. You could ask them to hook it up there to a computer to see if it is any better there...

Delegated Web Based Admin JES2005q1

hi,
does jes 2005q1 have a web based delegated admin facility?
does it match all the functionality of the iplanet delegated web based admin that was unfortunately not available for schema 2?
could anyone elaborate on what it does and doesn't cover (e.g. mailing lists, etc) compared to ida.
i attempted to wade thru the docco but it looked like it mainly mentioned commcli.
is there an install doc for it somewhere that works?
thanks

hi,
does jes 2005q1 have a web based delegated admin
facility?yes
>
does it match all the functionality of the iplanet
delegated web based admin that was unfortunately
not available for schema 2?I don't know. It could, but might not. I've not had a chance to use it. You might want to look at the documentation.
>
could anyone elaborate on what it does and doesn't
cover (e.g. mailing lists, etc) compared to ida.It IS iDA
>
i attempted to wade thru the docco but it looked like
it mainly mentioned commcli.Well, um, I've not had a chance to even look at it, yet.
Is there something specific you're looking for? I would certainly expect to see it being able to provision users/groups. If there's something beyond that you need, I may be able to get you more data.
>
is there an install doc for it somewhere that works?Installation should be part of the overall JES installer. No separate installer or installation steps should be needed.
>
thanks

Problem Starting the Web-Based Administrative Console

I have Installed Application Server 7 Platform Edition. Everything runs smooth. The Application Server and the Administrative Server got started perfectly. I checked both of these Servers and they are working perfectly.
The problem is that when trying to connect to the Web-Based Administrative Console.
I get the prompt to enter the Admin username and the password, once I have entered, it accepts but through the following message.
�Your Sun One Application Server License does not allow Remote Administration.
Please go to http://www.sun.com/upgradeas7 to upgrade your license.�
How can this happen because I am using the same machine where Application/Administrative Servers are running to get connected to Web-Based Administrative Console.

Hi,
May be you can put an external breakpoint in the method "_get_attribute_rtti"(of class CL_WDR_CONTEXT_NODE_INFO).
From that you can find out which attribute is causing the dump , and try to solve the issue . May be some data dictionary object is not transported to production.(Assuming that you have permission to put breakpoints in production system..:))
Aditya.

Web based administration console

Hi,
I know that a lot of folks have had problems running the admin server on linux, and thus can't run the administration console. As well, the administration console is not a good solution when the LDAP server(s) are on the other side of a firewall.
Is anybody here interested in having a web based administration console that allows you to do 95% of what you can do with the regular console? As well, it could offer some additional features.
I could develop and maintain such a system for Sun and the upcoming RH DS, if there is sufficient interest.
Contact me by clicking my handle, and using the email address.
podzap

Post Author: sarika_us
CA Forum: WebIntelligence Reporting
Hi,
I am facing the same problem. Could you please tell me how you resolved it.

Error accessing Infoview and web-based Administration Console

Post Author: rsir
CA Forum: WebIntelligence Reporting
After installing Business Objects 6.5.1 with SP3 in a single server as a primary node, everything works fine, except for the InfoView (wiasp) interface and the web/based administration interface (wiadmin). We've investigated in the BusinessObjects support site and in many forums about the problem and tried every single possible solution in order to correct the problem, without success.
The system we're working on is this:
Server model: Hewlett-Packard BLADE series BL 460C
OS: Windows 2003 SP1
Web Server platform: IIS6
What happens is that when we try to log in to infoview in the welcome screen, the url changes to:
http://(servername)/wiasp/scripts/login/webiStart.asp
And it displays the "The page cannot be displayed" error.
Also, when trying to log in to the web-based administration console (the client version works fine), it displays this error:
"The system is not started (Error: ADC 00071)"
We've tryed enabling parent paths in the IIS, redeploying the cluster node throught the configuration tool, checking the web extensions to be allowed, etc. without success.
Thank you very much in advace for any help.
Roderic Sir

Post Author: sarika_us
CA Forum: WebIntelligence Reporting
Hi,
I am facing the same problem. Could you please tell me how you resolved it.

My comapny has a web based portal for assigning work. Last week I lost the ability to connect to it through a tethered laptop using my Galaxy S5. It worked for the last several years using my drois phones. I can acess it from my home PC, through networked

I can no longer access my company's web based portal through a tethered laptop. All other web pages work. Has anyone experienced anything like this? It's a verizon problem for sure since I can get to it from every other method...

It could very well be Verizon where you're able to access from your home PC. But have you tried looking into the Laptops operating system Device Manager to see if that gives any indication of anything, like perhaps possible network driver update?

Web-based admin of Linux SAN+NAS

I'm planning on building a SAN+NAS (AoE, NFS, CIFS). I'd like to have web-based tool capable of managing core (eg. AoE, NFS, CIFS) and related (eg. networking, mdraid, lvm, smart) services/functions. I've looked into some of the big names like Webmin, but they seem like too much. I'd also like to actually learn something along the way, but starting from scratch seems daunting. Any suggestions (tools, frameworks, FMs, etc)?

There's always webmin.
https://www.archlinux.org/packages/extra/x86_64/webmin/
It doesn't work too well with BTRFS, but I enjoy it as a way to get a GUI overview of systemd.
Edit: Reading the OP is always a good idea.
If it seems too bloated for you, you can actually remove all the modules you don't need.
Last edited by dizzi90 (2014-03-03 16:43:50)

Unable to Start Soa_Server and BAM_SERVER in Web Logic Admin console

Hi,
I am new to this whole thing of SOA and web logic and trying to install SOA and web logic on my machine to learn SOA components.
Appreciate your inputs on the error i am at now.
I am trying to install SOA Suite 11.1.1.1 and in the process have installed web logic server as well.
I am unable to start both the Bam_server and the SOA_SERVER and the error message, I get, when i try to start the server;
======================================================================
For server bam_server1, the Node Manager associated with machine LocalMachine is not reachable.
All of the servers selected are currently in a state which is incompatible with this operation or are not associated with a running Node Manager or you are not authorized to perform the action requested. No action will be performed.
======================================================================
When i try to start , Node manager using start menu, i see a error as below :
=============================================================
May 18, 2012 6:12:56 PM weblogic.nodemanager.server.NMServer main
SEVERE: Fatal error in node manager server
java.net.BindException: Address already in use: JVM_Bind
at java.net.PlainSocketImpl.socketBind(Native Method)
at java.net.PlainSocketImpl.bind(PlainSocketImpl.java:383)
at java.net.ServerSocket.bind(ServerSocket.java:328)
at javax.net.ssl.impl.SSLServerSocketImpl.bind(Unknown Source)
at java.net.ServerSocket.<init>(ServerSocket.java:194)
at java.net.ServerSocket.<init>(ServerSocket.java:150)
at javax.net.ssl.SSLServerSocket.<init>(SSLServerSocket.java:84)
at javax.net.ssl.impl.SSLServerSocketImpl.<init>(Unknown Source)
at javax.net.ssl.impl.SSLServerSocketFactoryImpl.createServerSocket(Unkn
own Source)
at weblogic.nodemanager.server.SSLListener.init(SSLListener.java:76)
at weblogic.nodemanager.server.NMServer.start(NMServer.java:206)
at weblogic.nodemanager.server.NMServer.main(NMServer.java:377)
at weblogic.NodeManager.main(NodeManager.java:31)
=============================================================
Regards:
Nagaraj.s

First of all, I think this is a wrong forum. You had better use WebLogic Application Server forum - WebLogic Server - Upgrade / Install / Environment / Migration
From the error: Address already in use: JVM_Bind one can guess that some config of your Node Manager is wrong.
Note that you don't necessarily need the Node Manager to start WebLogic apps - it is necessary only if you want to use the Weblogic Console.
The link to docs on WLS: http://www.oracle.com/technetwork/middleware/weblogic/documentation/index.html

Weblogic 12c (12.1.2.1) JAX-WS Web Service :: Admin Console

When in my development environment (eclipse, weblogic server) and working on a JAX-WS web service; From the administrative console, under deployments, when I expand the EAR, i can see the EAR, a module for the web service project, and under Web Services, the context name of the service.
When i export the EAR and load this on my integration server, i do not see the Web Service listed, when expanding the depolyed EAR.
Anyone know what i am missing to have the service displayed?
Thanks,

Hi,
This community is to discuss Oracle Application Server specific issues, you can post this query in Oracle Weblogic for better response :-
WebLogic Server - Management / Console / WLST / Configuration
Regards,
Prakash.

Making a configuration change without using admin console

I am using the Platform Edition of App Server 7 so I don't have access to the web-based admin console.
I need to make a configuration change and the only directions I have are for the admin console.
Can anybody give me some pointers on what file to edit to acomplish the procedure below?
8. Log in to the Sun ONE Application Server administration console.
9. Select the application server Instance on which you installed the Identity Server.
10. Click JVM Settings and then JVM Options.
11. In the JVM Option field, enter the following string: -Dhttp.keepAlive=false
12. Click Add and then Save.

I think I've found it...
The file is server.xml and it is located at:
/var/opt/SUNWappserver7/domains/domain1/server1/config
There is a section under <java-config> with about 14 lines containing various <jvm-options>
I'll try adding this directive to the end of the <jvm-options> as follows:
<jvm-options>-Dhttp.keepAlive=false</jvm-options>

Web based server admin

Hi,
Does anyone know of a web based server admin tool? I would like to be able to administrate website etc through a web portal instead of having to have server admin running. Anyone know of a tool?
Thanks

Check the webmin at http://www.webmin.com/.

How to administer an Access database via web-based interface?

There are times when I need to edit a database record to do something my CMS wasn't designed to do, so I have to manually edit it. Normally I just ftp the Access mdb file to my pc, make edits, and reupload the mdb file and hope nobody updated the database in the meantime. Does anyone know of a web-based database admin system that will allow me to edit Access data? Sure would be nice if I could install something on the server that would allow me to edit any datasource there and not have to have a separate, customized interface for each datasource.
Thanks for looking, Bill

I would recommend naming that page with an extension that the web server will not serve. Rename it to use it and then rename it back when done.
Or just put access restrictions on it via the web server, so one needs to authenticate to the system before using it.
Or stop using Access and use a decent DB: Access is not appropriate to be used as a DB for a web application. But that might not be an option.
Adam

Identity SSO API with non-web based appilcations

hi,
i can appreciate hwo this works with cookies etc for web based applications that use the api or one of the agents on apache etc.
but how does it go with non web based java and say windows applications?
can anyone point me to some docs?
thanks

I don't work for Sun but here are my thoughts
1. Yes, if you don't want to use the AM SDK then the
XML auth service is the way to go.
2 & 3. dunno
4. I think if you pass around the SSOToken ID
generated by AM then any application can issue a SAML
query to see if the session is still valid and get
identity/auth attributes back
5. I think SAML 2.0 supports authentication and
single signoff
6. If you are doing a lot of thick client apps you
should use kerberos instead of AM web based
Authentication. AM supports kerberos authentication,
most modern browsers support SPEGNO for passing
credentials to web server, AD supports Kerberos, and
even Solaris 10 comes with a free KDC built into the
OS. There is plenty of documentation around kerberos
and the JDK out of the box supports GSS-API for
Kerberos authenticationThank you for your feedback.
We looked at the use of kerberos as well, but this is not really an option as we are dealing with fat clients installed on desktops of clients. So these desktops do not fall within our span control (multiple domain controllers etc.).
Regards,
Thomas

Does Embedded OC4J has a web based admin console ?

Similar Messages

Maybe you are looking for