Does Encoder support any way to burn in timecode?

I currently use either Grinder or Compressor to burn in timecode for files that I share with my editing team. I'm I missing a way to do this in Encoder CS6, or is this not supported? Thanks in advance for any help offered!

Currently you need to use Premiere Pro for this. Would make a good feature request, though.
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

Similar Messages

Hard drive crashed- is there any way to burn songs from an ipod?

hi mac geniuses. my HD crashed. there is a pearl jam concert that i downloaded from their website after i went to the concert. the concert is not available for download any longer. is there any way to burn songs or transfer songs from an ipod so i don't lose this music?? as soon as i plug in my ipod to my 'new' computer, it will be wiped. thanks!

1). Connect your iPod to your computer. If it is set to update automatically you'll get a message that it is linked to a different library and asking if you want to link to this one and replace all your songs etc, press "Cancel". Pressing "Erase and Sync" will irretrievably remove all the songs from your iPod.
2). When your iPod appears in the iTunes source list change the update setting to manual, that will let you use your iPod without the risk of accidentally erasing it. Check the "manually manage music and videos" box in Summary then press the Apply button. Also when using most of the utilities listed below your iPod needs to be enabled for disc use, changing to manual update will do this by default: Managing content manually on iPod and iPhone
3). Once you are safely connected there are a few things you can do to restore your iTunes from the iPod. There are a number of third party utilities that you can use to retrieve the music files (purchased and non purchased) and playlists from your iPod. I use Senuti but have a look at the web pages and documentation for the others too. You can read reviews and comparisons of some of them here (you'll find that they have varying degrees of functionality and some will transfer movies, videos, photos and games as well):
Wired News - Rescue Your Stranded Tunes
Comparison of iPod managers
A selection of iPod to iTunes utilities:
Senuti Mac Only (iPod Touch & iPhone compatible)
PodView Mac Only
PodWorks Mac Only
iPodDisk PPC Mac Only (experimental version available for Intel Macs)
TuneAid Mac only (iPhone and iPod Touch compatible)
iPodRip Mac & Windows
YamiPod Mac & Windows
iPod Music Liberator Mac & Windows
iGadget Mac & Windows (iPhone and iPod Touch compatible)
Floola Mac & Windows
Music Rescue Mac & Windows (iPhone and iPod Touch compatible)
iRepo Mac & Windows (iPhone and iPod Touch compatible)
iPod Access Mac & Windows (iPhone and iPod Touch compatible)
TouchCopy Mac & Windows (iPhone and iPod Touch compatible)
There's also a manual method of copying songs from your iPod to a Mac or PC. The procedure is a bit involved and won't recover playlists but if you're interested it's available on page 2 at this link: Copying Content from your iPod to your Computer - The Definitive Guide
4). Keep your iPod in manual mode until you have reloaded your iTunes and you are happy with your playlists etc then it will be safe to return it auto-sync.
5). I would also advise that you get yourself an external hard drive and back your stuff up, relying on an iPod as your sole backup is not a good idea and external drives are comparatively inexpensive these days, you can get loads of storage for a reasonable outlay: Back up your iTunes library by copying to an external hard drive

Just got given an ipod touch 64G for free , but not to sure what mod it is. tried to download FB and could'nt because it said i need to update to iOS 6.0, does any1 know any way to upgrade or update?? please.

just got given an ipod touch 64G for free , but not to sure what mod it is. tried to download FB and could'nt because it said i need to update to iOS 6.0, does any1 know any way to upgrade or update?? please.

Identifying iPod models.

By turning off your icloud back-up, does that in any way "free up" space?

By turning off your icloud back-up, does that in any way "Free up" space on your iphone?

No.

Is there any way to burn several playlists on a single CD?

Using iTunes 6, I have only found how to burn a single playlist into a CD-R. Does anyone know if you can burn several playlists onto the same CD-R. (Given that all the playlists in this case would fit into a 700 MB CD-R) Thanx!
Windows XP Pro
Windows XP Pro
Windows XP Pro

hiya!
hmmm. itunes doesn't support "open burning sessions", so you can't go back and reburn an additional playlist to a CD-R that has already had one playlist burnt on them. so we'd need to burn all those playlists simultaneously.
one way to do that would be to create a new smart playlist that contains all the playlists that you want to burn in the session. use the following rule:
Match any of the following rules:
Playlist is [first playlist you want to burn]
Playlist is [second playlist you want to burn]
(etc)
you might then want to go through the smart playlist and reorder the songs. once you've got them in your preferred order, burn the smart playlist to the CD-R.
(doing things this way might save you a bit of time. rather than having to recreate a "burning playlist" from scratch each time you want to burn multiple playlists, you could just change the rules in the smart playlist to alter which playlists you want to burn at any given time.)
How to create a Smart Playlist with iTunes
love, b

Does apex support any server side JSP or PHP?

I have the folowing script that is used to save flash files as images. I am hoping there is some way to make these serverside calls from within apex.
<%@ page import="java.io.OutputStream"%>
<%@ page import="java.awt.Color"%>
<%@ page import="java.awt.Graphics"%>
<%@ page import="java.awt.image.BufferedImage"%>
<%@ page import="javax.imageio.ImageIO"%>
<%
     //Decoded data from charts.
     String data="";
     //Rows of color values.
     String[] rows;
     //Width and height of chart.
     int width=0;
     int height=0;
     //Default background color of the chart
     String bgcolor="";
     Color bgColor;
     //Get the width and height from form
     try{
          width = Integer.parseInt(request.getParameter("width"));
          height = Integer.parseInt(request.getParameter("height"));
     catch(Exception e){
          //If the width and height have not been given, we cannot create the image.
          out.print("Image width/height not provided.");
          out.close();
     if(width==0 || height==0){
          //If the width and height are less than 1, we cannot create the image.
          out.print("Image width/height not provided.");
          out.close();
     //Get background color from request and set default
     bgcolor =request.getParameter("bgcolor");
     if (bgcolor==null || bgcolor=="" || bgcolor==null){
               bgcolor = "FFFFFF";
     //Convert background color to color object
     bgColor = new Color(Integer.parseInt(bgcolor,16));
     //Get image data from request
     data = request.getParameter("data");
     if(data==null){
          //If image data not provided.
          out.print("Image Data not supplied.");
          out.close();
     try{
          //Parse data
          rows = new String[height+1];
          rows = data.split(";");
          //Bitmap to store the chart.
          //Reference to graphics object - gr
          BufferedImage chart = new BufferedImage(width,height,BufferedImage.TYPE_3BYTE_BGR);
          Graphics gr = chart.createGraphics();
          gr.setColor(bgColor);
          gr.fillRect(0,0,width,height);
          String c;
          int r;
          int ri = 0;
          for (int i=0; i<rows.length; i++){
               //Split individual pixels.
               String[] pixels = rows.split(",");
               //Set horizontal row index to 0
               ri = 0;
               for (int j=0; j<pixels.length; j++){
                    //Now, if it's not empty, we process it
                    //Split the color and repeat factor
                    String[] clrs = pixels[j].split("_");
                    //Reference to color
                    c = clrs[0];
                    r = Integer.parseInt(clrs[1]);
                    //If color is not empty (i.e. not background pixel)
                    if (c!=null && c.length()>0 && c!=""){
                         if (c.length()<6){
                              //If the hexadecimal code is less than 6 characters, pad with 0
                              StringBuffer str = new StringBuffer(c);
                              int strLength = str.length();
                              for ( int p = c.length()+1; p <= 6 ; p ++ ) {
                                        str.insert( 0, "0" );
                              //Assing the new padded string
                              c = str.toString();
                         for (int k=1; k<=r; k++){
                              //Draw each pixel
                              gr.setColor(new Color(Integer.parseInt(c,16)));
                              gr.fillRect(ri, i,1,1);
                              //Increment horizontal row count
                              ri++;
                    }else{
                         //Just increment horizontal index
                         ri = ri + r;
          //Returns the image
          response.setContentType("image/jpeg");
          response.addHeader("Content-Disposition", "attachment; filename=\"FusionCharts.jpg\"");
          OutputStream os = response.getOutputStream();
          ImageIO.write(chart, "jpeg", os);
          os.close();
     }catch(Exception e){
          //IF the image data is mal-formatted.
          out.print("Image data is not in proper format.");
          out.close();
%>

NO, APEX does NOT support running jsp or PHP scripts..
Thank you,
Tony Miller
Webster, TX

When i click mail icon,my mailbox does not appear.any way to fix?

it was working fine then was asked if i wanted to sync my email adress to ical, icalender etc which i did. previosly i had an itunes software update and did a restart. now the computer is up and running i cant get my mailbox to open when i click on the mail icon like it usualluy does. the only way to get into my mailbox is to click on the mailbox header at the top and click on 'go to favourite mailbow'. Any way to fix this please?

Log out or reboot and try again.

Does BC support any type of include?

We currently have/use 4 templates, but that is about to grow. We also have several catalogs, but that too will grow.
All of these templates use the exact same header (menu) and footer.
Every time I need to make a change to the header/menu/footer, I must make it in all 4 templates, and their stylesheets.
Now we want to have a different template for each catalog in our store.
I know I can make and assign different templates, one for each catalog, but that presents another issue. Since I currently have 4 templates, and each has it's own stylesheet, when I make a change to the header or footer, which is the same on all 4 templates, I must make that change in all 4 templates and all 4 stylesheets. That's a lot of work. If I have multiple templates for multiple catalogs, that work doubles for each new template.
So if I have 20 catalogs and 20 templates, and need to change the menu in the header, then I have to make those changes in 40 places, 20 templates and 20 style sheets.
Is there any way in BC to use something similar to PHP Includes? Or what about using Dreamweaver Library Objects? Is that possible or compatible?
Thank you in advance.

Content Holders.
http://helpx.adobe.com/business-catalyst/using/create-insert-reusable-content.html

Dolby Digital Encoder Does Not Support Any Encoding Options

Is it just me, or are there no encoding options for the Dolby Digital encoder other than the bitrate?
How are you supposed to select the dialog normalization, dynamic range compression profile, etc. for your audio? Without these parameters set correctly, the audio will not be encoded correctly.

@jbowden:
> Adobe licenses the AC3 encoder that Encore uses from Dolby Laboratories. This is stated quite clearly in the splash screen, the box, and other materials distributed with Encore.
I didn't say otherwise. But what they license is the code, not the implementation. Implementations are supposed to be submitted to Dolby for approval, and I'm surprised that Dolby approved the implementation given the oversights and encoding quality.
> It's a consumer-level encoder, and if you look around this forum I think you'll find very few posts about audio quality, which would seem to indicate that Encore provides acceptable audio quality for most users. Cases with audible clipping can occur if the input signal is too high...keeping your audio signal around -6db should eliminate any clipping.
I don't buy into this whole argument about "consumer-level" and "professional-level". What is the exact difference? Dolby's code is constant across all licensed encoders, so any differences in encoding are the result of an implementation difference, and that's Adobe's fault, not Dolby's.
Audio signals are audio signals. Why do I have to keep my audio from peaking above -6dB with the Adobe encoder? I can take audio whose peaks go all the way up to 0dB and encode it with the Sonic Foundry encoder with no problem -- no clipping, no volume pumping, etc. Not so with Adobe Encore's implementation.
@Neil Wilkes:
> As far as Dialnorm goes, again I say it is pretty meaningless in a stereo file.
Dolby's encoding guidelines documents seem to say otherwise. In my readings, it seemed pretty clear that the decoder must have the dialnorm parameter set to the LAeq level of the dialog in the audio regardless of channel configuration.
> I suppose, although as long as the stereo mix is actually set up correctly there is no need to invoke DRC. The only time DRC would be needed on a stereo file is if the thing is too darn loud.
I have to disagree with this. There is a LOT of material that can benefit from DRC, both soundtracks that contain a large dynamic range (explosions to whispers), and soundtracks that have small dynamic range (speech). DRC doesn't have anything to do with the overall volume level of the soundtrack, but the dynamic range of the soundtrack. If the soundtrack is too loud overall, that's not a DRC problem, that's a level problem.
> In a properly balanced stereo file, there is no need at all for DRC or Dialnorm. There is no centre channel containing dialogue, just a phantom centre, so what are you going to reference it to, please? How can you attenuate the left/right channels with reference to the centre channel dialogue when there is no centre channel present?
Just because the dialog isn't isolated in the center channel doesn't mean you can't use it to set the dialnorm parameter. Plus, the decoder doesn't attenuate the left/right channels with reference to the center channel, it attenuates the entire soundtrack on playback.
Your quote from Dolby labs is very correct. Following that procedure ensures that the decoder, when it applies attenuation based on dialnorm and applies DRC will work as intended.
> Additionally, it is not referenced to average RMS either. RMS is close to the correct way to measure, but not correct.
That is true. However, I don't have any equipment to measure LAeq directly, so RMS of a dialog section of my audio will have to do. I do know this: When I applied to Dolby for logo usage on my DVDs, they requested samples of my DVDs for approval of my methods. My first submissions (where I didn't bother with dialnorm & DRC) were rejected, and Dolby sent me a letter telling me such. After I produced further DVDs using my method in my Doom9 post and resubmitted the DVDs to Dolby, they were approved. I can only conclude that my method, while not perfectly accurate, is good enough to qualify for Dolby's rigorous standards.
The bottom line is that I feel I have enough evidence to conclude that the DD encoder implementation in Encore is substandard. If you or anyone else feels it meets your requirements, then use it. But I for one will not allow a single DVD to go out from my company with audio encoded with this encoder.

File Data Source: does not support any other host except LOCALHOST?

I am using US 1.0.3.
This exercpt is from the OTN iLearn Subscribed course titled "Oracle9i UltraSearch New Features" on operating system file access:
"The file protocol is used only for the machine that launches the crawler. You can not specify any other host for this kind of URL, except LOCALHOST."
Does it mean that US 1.0.3 can not be used to search other file servers on the network? For example, we have US 1.0.3 installed on a server S1 which is on a network with other servers (e.g. S2). I want to use US to search files in the folder myDir on server S2. So I tried to create a file data source with this URL:
file://\\s2\myDir\
But I got this error:
Invalid file protocol URL: file//\\s2\myDir\
Hostname of the file URL "file://\\s2\myDir\ is not "localhost".
My question:
(1) Can US 1.0.3 search files on a different server than the one US is running on?
(2) If so, how to specify the URL using the above example for it to work?
(3) If not, how about the newer version of US, 9.2 or 9.02? Can they be used to search files on other network servers/drives?
(4) If no to question (3), is there any plan to support this in the future version of US?
My comment: Not able to search other servers really limits the userfulness of US. I really hope Oracle will consider adding this capability.
Thanks!

More on my previous questions:
Since I posted my previous question, I have read on the 1.0.3 online help that we can define remote crawlers to crawl "on a remote machine other than the Oracle Ultra Search database". So I assume this is how to make US to search on other servers. In the online documentation it also includes the following paragraph on "Remote Crawler Profiles Page":
"Use this page to view and edit remote crawler profiles. A remote crawler profile consists of all parameters needed to run the Ultra Search crawler on a remote machine other than the Oracle Ultra Search database. A remote crawler profile is identified by the hostname. The profile includes the cache, log, and mail directories that the remote crawler shares with the database machine. "
The Remote Crawler Profiles Page, however, displays only remote crawlers already defined and the page seems to be used just for editing the porfiles of these defined remote crawlers.
My questions:
(1) How do I create the remote crawlers and defines the profiles in the first place?
(2) Where can I find more documentation on remote crawlers?
(3) Once the remote crawlers are set up, how do I specify the file URLs for each remote crawler?
(4) With US9.02 or 9.2, does remote crawler work the same as in 1.0.3, or are there any enhancements?
Thanks!

Does JavaDoc supports any language?

Hello all,
Im trying to find or to develop a tool that can generate automatic documentation for any source code language.
Does for example, javadoc supports C++ or Pl/SQL?
If i use the javadoc style comment on this files can i generate html files by simply invocating on command line: javadoc something.sql?
If i use the pod of perl i can easely do something like this! But i was wondering if with javadoc i can do the same or if there is any tool who can generate documentation of any source code!?
Thank you all
Nuno

Hi Nuno,
I can't speak for other tools but I am sure that Javadoc only works with Java source. To generate documentation, it requires an internal representation of the source. The tool can only handle .java files.
-Jamie

Is there any way to burn my imovie to dvd without the menus/themes?

please help!
i need to find a way to get my imovie project onto a dvd soon because it must be mailed to a film competition tomorrow! is there anyway i can use idvd to get it onto the dvd but not have the menus/themes? (if not, what should i do!??!? it needs to be burned tonight!!!)
thanks!!!!!

Hi
Im new to forums and hope this is read by someone and gets posted.
I am using iDVD and a demo reel I just made in imovie
I have a few problems-I have set up a nice theme with picture and a link to a demo reel of my work.
when I watch it in the preview it all looks good. When I burn a DVD the menu/themes is not there and it starts automatically, but not only that.. it's the wrong movie even though I have the right movie in idvd?
I have been able to burn the CORRECT movie but not in iDVD. However it only plays in mac computers not PC or any DVD player.
Im a new mac user so bare with me. My movie seems to be a M4v-should it not be an Mpeg and how do I make that happen?

ANY way to burn MP3 CDs/DVDs with folders on iTunes??

Hey all, so I was trying to backup my mp3 collection onto a burned DVD or two (it's pretty big), but that could still play them when I put it into my computer now and then.
iTunes has always been pretty good about burning MP3 discs that'll easily play in your computer (I haven't yet tried burning a DVD as an MP3 disc, but I've heard they work the same). However, the one drawback about it that I see is that the MP3 discs don't really separate the actually albums/songs on the disc when you try opening it on the desktop into actual folders by album/artist/etc., they're all just kind of cluttered together (so if you wanna recopy/reburn an individual album off an MP3 disc back to your computer, you've got to do a Show File in Finder on iTunes and hunt & drag 'em in the Finder, as opposed to just having one folder that you can drag back onto the desktop, Toast, etc.) And that's just with one 650-700 MB CDR; if you're dealing with 4.7 GIGS of music, you can see how it'd be a pain to organize and keep track of).
I know that for PC, Windows Media Player can find any play data CDs with music on them pretty easily. Is there a similar player for Mac users??
I hate to ask about other programs on an iTunes forum, but maybe you guys can relate to this problem, have found ways to deal with it (in the past I've just color-labeled the songs according to album so I can visually see which songs go with which on the Finder, but again, you can see how that'd be a pain to do w/ 4.7 GBs worth). Thanks.

Sort the playlist by Album and Burn and the DVD will be in Album folders.
Sort by Artist and Burn and the DVD will be in Artist/Album folders.

HT1583 When burning a DVD of photos and music from iDVD, the photos blur right before the transitions and the music has about 5 second glitches here and there before the music starts again. Is there any way to burn the DVD without this happening?

Each year I am in charge of making a slideshow of photos and music for my annual company meeting. I always use iDVD to set up my photos and music and then burn the DVD to play at the meeting. Every time I burn the DVD, it blurs right before the transition of the photo. It has always done this and I'm not sure why. It will also make the music glitch in a few spots for about 5 seconds or more. If I burn another DVD to try it again, the glitches will still be there, but in different spots. I've tried the highest quality of DVD's possible and this still happens. What can I do to fix this problem?

Try disabling transitions altogether!
There is a technical reason that this breakup happens - it is to do with how slideshows can be saved within the DVD specification, they can either be recorded as 'video streams' or as a collection of 'still images'.
When you add transitions iDVD has no option but to use a video stream, this can result in terrible 'breakup' because the mpeg 2 encoder isn't designed to handle scenes that are static with a sudden short change. You can see 'artefacts' in the video stream…
https://en.wikipedia.org/wiki/Compression_artifact
'Still image slideshows' avoid the issue altogether by only showing a static image, no video compression is used & because the scene doesn't transition so it shouldn't breakup.
NOTE: Music on the slideshow is irrelevant, both types can use a soundtrack.
I cannot remember if it is possible to force iDVD to only make still image slideshows, I always use DVD Studio Pro to correctly setup DVD's. I'd suggest you use the option to save the DVD to a disk image & then open that disk image so that DVD Player can preview it, that should save on the number of test disks you burn.
If you cannot make it avoid using video streams you may be ether off making your own video slideshow in iMovie & then import that into iDVD. It may eventually look better despite being a video stream!
iDVD isn't really condusive to professional levels of control.

When a wbsite stores cookies on my computer does that in any way effect the results of future searches or search suggestions?

I have done searches and gotten suggestions and or results from pornographic sites. Does that mean some one has used this computer to view pornography and those sites have left cookies on my computer that effect future search results and suggestions?

Do a malware check with a few malware scan programs.<br />
You need to use all programs because each detects different malware.<br />
Make sure that you update each program to get the latest version of the database.<br />
*http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
*http://www.superantispyware.com/ - SuperAntispyware
*http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
*http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
*http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
See also "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked and [[Searches are redirected to another site]]

Does Encoder support any way to burn in timecode?

Similar Messages

Maybe you are looking for