Does Encore support "Picture-in-picture" (PiP or Secondary Video)?

Is there any way to do Picture-in-Picture or Secondary Video in Encore?
If not, are there any helpful links to products that will?
I've been having a hard time finding any information regarding PiP other that the Secondary Video requirements (supported resolutions, ABR, PBR and flagged as interlaced, etc.)...
Any help would be great.
Thanks!

If you mean in a menu, that's possible, but you'll need to use Premiere or AE to create the video.
If you mean in a timeline - that's also possible only if you create the PIP in Premiere or AE. In other words, it's always displayed.
The DVD-Video format does support multiple video angles, but they cannot be displayed simultaneously in a PIP situation - only one stream at a time can be displayed (i.e., no PIP).

Similar Messages

Pages 5.0 version does not support pictures in header

I recently installed new soft OS X Maverick and along with this also renewed soft for Numbers, Pages, Keynote, and some more apps.
Pages version 5.0 does not support its earlier version pre-set headers and footers. All the logos (picture files) I had inserted for my company template in the header are gone and I cannot re-enter them either. Does anyone can give e a hint on how to use picture files in Pages version 5.0 templates?
This is first time in 2+ years that I prefer to use MsWord over Pages on my Mac, which is a pity.
*I have tried to get used to new soft versions of numbers and pages now for around 3 weeks but it cannot make me to change my opinion that the eralier versions were much better. Unfortunately with OS X Maverick I have to use new versions for these apps, or do I, any hints?
I already deleted once (2 weeks ago) OS X Maverick and switched back to OS X Mountain Lion (I use TM), but then decided after while to still update the op system soft to newest one available, as I've hoped that developers in Apple will come up with their soft improvements and bug fixes soon enough.
Among the other disomforts (like pages, numbers and changed tag system) Safari is much slower than with previous version.
Any hints are appreciated!
Thanks, Paul

https://discussions.apple.com/message/21546508#21546508 check this out

Premiere Elements V4 does Not Support Matrox Parhelia 128mb Vid Crd - What video card should I get?

Premiere Elements V4 does not support Matrox Parhelia 128bm Video Card. Is there a recommended card that will work?
I have an Asus P2B Mother Board. Many thanks for any feedback.

Welcome to the forum.
About any current card, with good driver support, should work fine. The amount of VRAM is not that important, but I would go with ~ 1GB. The driver support is the main factor.
I am running PrE 4.0 and PrPro CS 2 Production Studio on my laptop w/ an nVidia GeForce 8800M GTX - 512GB VRAM, with no issues. That card/chip is a bit old now, and obviously the VRAM is less, than I mentioned, but to "future-proof" the computer a bit, the ~ 1GB VRAM would possibly help.
Good luck,
Hunt

We keep getting a message saying that the iPad does not support adobe flash sites i.e. news videos etc what can we do

Keep getting videos blocked and a window saying adobe flash not available for this site. Is there a fix?

There are some browsers in the app store that do support flash. But you would be well served to read the reveiews and see if they'll work for you. They seem to have mixed results and compatibilities.
Adobe and Apple are at an impasse when it comes to flash. Adobe could never make aversion that Apple accepted, Apple wouldn't accept anything that Adobe made and now Adobe has announced that they're abandoning ALL mobile flash work....so those websites that depend solely upon flash will be needing to find a better way to accomodate the smart phone/mobile device phenomenon, because they're depending on what is not defunkt technology.

Does HSSF support Excel with Picture?

The following code works fine if the Excel File "test.xls" does not contain picture.
It also runs without error after I have added a picture to the Excel sheet, but when I open the excel file "test.xls", I got an error message "Unable to read file".
Does HSSF support Excel with Picture?
POIFSFileSystem fs = new POIFSFileSystem(new FileInputStream("test.xls"));
HSSFWorkbook wb = new HSSFWorkbook(fs);
HSSFSheet sheet = wb.getSheetAt(0);
int r = 10;
short c = 10;
HSSFRow row = sheet.getRow(r);
if (row != null)
if (row.getCell(c) != null)
row.getCell(c).setCellValue("testing");
else
row.createCell(c).setCellValue("testing");
FileOutputStream fileOut = new FileOutputStream("test.xls");
wb.write(fileOut);
fileOut.close();

If it must be dynamically embeded, you're SOL AFAIK. You can embed images in a template, then open that template and add data. POI will allow images and pivot tables to be in the original document and it will save them undamaged, however you cannot create images or pivot tables from within POI (HSSF).

CS6 does not support the picture package plug in. How to print like picture package in CS6?

CS6 does not support the picture package plug in. How to print like picture package in CS6?

If I recall, the picture package is in Bridge. Which was removed in CC and newer.
In bridge change the workspace to see the output options.

ImagebrowserEX does not load pictures

Recently I bought a new Canon Eos 6d. With it came Canon's Imagebrowser EX software.
It installs alright, but when I start it, it asks for default folders to load pictures from. I select a folder, press OK, then it starts searching for the pictures on my computer. Almost immediately a message pops up that reads "Imagebrowser EX doesn't work anymore". I run Windows 7, 64bit.
I tried:
uninstalling en reinstalling the software, both from the solutions disk and the Canon website
upgrading .net framework to 4.5
setting different folder as the default folder for Imagebrowser (even a folder with just ten pictures in it).
Contacting (Dutch) Canon support. This wasn't very helpful as the stated it was so clearly a pc /windows issue.
The Zoombrowser software that came with my 350d years ago, still worked for me. Unfortunately it does not support the 6d.
Any help would be appreciated.

I too recently (June 2014) purchased the Canon EOS 70D bundle from Costco. I made sure the USB is attached and the [Canon EOS 70D] icon is displayed in My Computer in Windows 7 Explorer. After clicking the ImageBrowserEx short cut the following transpired: 1. the [Initial Setup] sub-window with changing message [Starting 20%, 40%, 60%, 80% and 100% Completed] is displayed. 2. Thereafter, another sub-window is displayed with with two choices to select one of two options: [Add Pictures/My Pictures folder] or [Add a user set folder]. 3. I tried both options in different scenarios and get the same results after I click OK: 3.1. an icon is displayed in All Images (only for [Add Pictures/My Pictures folder] option) 3.2. Counting Images is displayed 3.3. "searching" is displayed at the message area of the ImageBrowser EX window for two seconds 3.4. then the error [ImageBrowserEx has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available. [Close program] I read your Canon Requirements elsewhere in the forums and believe that my system meets your requirements, even after after CLOSING ALL WINDOWS APPLICATIONS before starting the ImageBrowser EX program. Details of my laptop are: · Manufacturer/Model: HP ENVY 6 Notebook PC · Processor: Intel(R) Core(TM) i5-3317U CPU@ 1.70GHz 1.70 GHz · Installed memory (RAM): 8.00 GB · System type: 64-bit Operating System · Operating System: Windows 7 Home Premium. · Service Pack 1. (I have two older Canon SLRs and decided to get the Nikon D7100 last month but after being impressed with the YouTube comparisons of the Nikon D7100 vs Canon 70D, and surprised that three of the Costco Stores in my area SOLD OUT of the 70D, I was convinced that I had to get my hands on the 70D). I'm still testing the two new bundled SLR packages and have yet to view my pictures using the ImageBrowserEx software that came in the CD. Your suggested FIX is appreciated.

Support picture on ipod with no solutions!

my fifth generation ipod has the support picture with the sad ipod on it. i have tried all steps on the website except restore. and when i plug the ipod into my computer it is not recognized. it also says low battery and i charged it all night but that didn't do anything. same story this morning. how do i get the support picture to go away? i was going to restore it but the computer won't recognize it so i can. help!?
Dell 1150 Windows XP
Dell 1150 Windows XP

Hello,
Please have a read the following and try one by one
Hello,
If a sad iPod icon or an exclamation point and folder icon appears on your iPod’s screen, or with sounds of clicking or HD whirring, it is usually the sign of a hard drive problem and you have the power to do something about it now. Your silver bullet of resolving your iPod issue – is to restore your iPod to factory settings.
http://docs.info.apple.com/article.html?artnum=60983
If you're having trouble, try these steps at different levels one at a time until the issue is resolved. These steps will often whip your iPod back into shape.
Make sure you do all the following “TRYs”
A. Try to wait 30 minutes while iPod is charging.
B. Try another FireWire or USB through Dock Connector cable.
C. Try another FireWire or USB port on your computer .
D. Try to disconnect all devices from your computer's FireWire and USB ports.
E. Try to download and install the latest version of iPod software and iTunes
http://www.apple.com/ipod/download/
http://www.apple.com/itunes/download/
F. Try these five steps (known as the five Rs) and it would conquer most iPod issues.
http://www.apple.com/support/ipod/five_rs/
G. Try to put the iPod into Disk Mode if it fails to appear on the desktop
http://docs.info.apple.com/article.html?artnum=93651
If none of these steps address the issue, you may need to go to Intermediate level listed below in logical order. Check from the top of the lists to see if that is what keeping iPod from appearing on your computer in order for doing the Restore.
Intermediate Level
A. Try to connect your iPod with another computer with the iPod updater pre-installed.
B. Still can’t see your iPod, put it in Disk Mode and connect with a computer, instead of doing a Restore on iPod Updater. Go and format the iPod instead.
For Mac computer
1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
5. Eject your iPod and do a Reset
6. Open the iPod Updater and click “Restore”
For Window computer
Go to folder “My Computer”
Hope you can see your iPod there and right click on the iPod
Choose “Format”. Ensure the settings are at “Default” and that “Quick Format” is not checked
Now select “Format”
Eject your iPod and do a Reset
Open the iPod Updater and click “Restore”
In case you do not manage to do a “Format” on a window computer, try to use some 3rd party disk utility software, e.g.“Partition Magic”.
C. Windows users having trouble with their iPods should locate a Mac user. In many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
Tips
a. It does not matter whether the format is completed or not, the key is to erase (or partly) the corrupted firmware files on the Hard Drive of the iPod. After that, when the iPod re-connected with a computer, it will be recognized as an fresh external hard drive, it will show up on the iPod updater.
b. It is not a difficult issue for a Mac user to find a window base computer, for a PC user, if they can’t find any Mac user, they can go to a nearest Apple Shop for a favor.
c. You may need to switch around the PC and Mac, try to do several attempts between “Format” and “Restore”
http://discussions.apple.com/thread.jspa?messageID=2364921&#2364921
Advance Level
A. Diagnostic mode solution
If you have tried trouble shooting your iPod to no avail after all the steps above, chances are your iPod has a hardware problem. The iPod's built-in Diagnostic Mode is a quick and easy way to determine if you have a "bad" iPod.
You need to restart your iPod before putting it into Diagnostic Mode. Check that your hold switch is off by sliding the switch away from the headphone jack. Toggle it on and off to be safe.
Press and hold the following combination of buttons simultaneously for approximately 10 seconds to reset the iPod.
iPod 1G to 3G: "Menu" and "Play/Pause"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Menu" and "Select"
The Apple logo will appear and you should feel the hard drive spinning up. Press and hold the following sequence of buttons:
iPod 1G to 3G: "REW", "FFW" and "Select"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Back" and "Select"
You will hear an audible chirp sound (3G models and higher) and the Apple logo should appear backwards. You are now in Diagnostic Mode. Navigate the list of tests using "REW" and "FFW". The scroll wheel will not function while in diagnostic mode. For further details on Diagnostic mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/
Try to do the 5in1, HDD R/W and HDD scan tests. Some successful cases have been reported after the running the few tests under the Diagnostic mode. In case it does not work in your case, and the scan tests reports show some errors then it proves your iPod has a hardware problem and it needs a repairing service.
B. Format your iPod with a start disk
I have not tried this solution myself, I heard that there were few successful cases that the users managed to get their iPod (you must put your iPod in disk mode before connecting with a computer) mounted by the computer, which was booted by a system startup disk. For Mac, you can use the Disk Utility (on the Tiger OS system disk), for PC user, you can use the window OS system disk. Try to find a way to reformat your iPod, again it does not matter which format (FAT32, NTFS or HFS+) you choose, the key is to erase the corrupted system files on the iPod. Then eject your iPod and do a Reset to switch out from Disk Mode. Reboot your computer at the normal way, connect your iPod back with it, open the iPod updater, and hopefully your iPod will appear there for the Restore.
If none of these steps address the issue, your iPod may need to be repaired.
Consider setting up a mail-in repair for your iPod http://depot.info.apple.com/ipod/
Or visit your local Apple Retail Store http://www.apple.com/retail/
In case your iPod is no longer covered by the warranty and you want to find a second repairing company, you can try iPodResQ at your own risk
http://www.ipodresq.com/index.php
Just in case that you are at the following situation
Your iPod warranty is expired
You don’t want to pay any service charges
You are prepared to buy a new one
You can’t accept the re-sell value of your broken iPod
Rather than leave your iPod as paper-weight or throw it away.
You can try the following, but again, only do it as your last resort and at your own risk.
Warning ! – It may or may not manage to solve your problem, and with a risk that you may further damage your iPod, which end up as an expensive paper weight or you need to pay more higher repairing cost. Therefore, please re-consider again whether you want to try the next level
Last Resort Level
1. . Disconnecting the Hard Drive and battery inside the iPod – Warning !! Your iPod warranty will be waived once you open the iPod.
In Hong Kong there are some electronic shops offering an iPod service for Sad iPod, the first thing they do is to open up the iPod’s case and disconnecting the battery and the Hard Drive from the main board of the iPod. Wait for 5-10 minutes and reconnecting them back. The reason behind which I can think of is to do a fully reset of a processor of the iPod. In case you want do it itself and you believe that you are good on fixing the electronics devices and have experience to deal with small bits of electronic parts, then you can read the following of how to open the iPod case for battery replacement (with pictures)
http://www.kokopellimusic.us/KM_instructions.htm
2.Press the reset button on the Hard Drive inside the iPod – Suggestion from Kill8joy
http://discussions.apple.com/thread.jspa?messageID=2438774#2438774
Have I tried these myself? No, I am afraid to do it myself as I am squeamish about tinkering inside electronic devices, I have few experiences that either I broke the parts (which are normally tiny or fragile) or failed to put the parts back to the main case. Therefore, I agree with suggestion to have it fixed by a Pro.
2. Do a search on Google and some topics on this discussion forum about “Sad iPod”
What should I do with my iPod? Send it or keep it?
http://discussions.apple.com/thread.jspa?threadID=469080&tstart=0
Strange error on iPod (probably death)
http://discussions.apple.com/thread.jspa?threadID=435160&start=0&tstart=0
Sad Face on iPod for no apparent reason
http://discussions.apple.com/thread.jspa?threadID=336342&start=0&tstart=0
Meeting the Sad iPod icon
http://askpang.typepad.com/relevanthistory/2004/11/meeting_thesad.html#comment-10519524
Sad faced iPod, but my computer won’t recognize it?
http://discussions.apple.com/thread.jspa?messageID=2236095#2236095
iPod Photo: unhappy icon + warranty question
http://discussions.apple.com/thread.jspa?messageID=2233746#2233746
4th Gen iPod Users - are we all having the same problem?
http://discussions.apple.com/message.jspa?messageID=2235623#2235623
Low Battery, and clicking sounds
http://discussions.apple.com/thread.jspa?messageID=2237714#2237714
Sad faced iPod, but my computer won’t recognize it
http://discussions.apple.com/thread.jspa?messageID=2242018#2242018
Sad iPod solution
http://discussions.apple.com/thread.jspa?threadID=412033&tstart=0
Re: try to restore ipod and it says "can't mount ipod"
http://discussions.apple.com/thread.jspa?threadID=443659&tstart=30
iPod making clicking noise and is frozen
http://discussions.apple.com/thread.jspa?messageID=2420150#2420150
I am not suggesting that you should follow as well, but just read them as your reference. You are the person to make the call.

Ipad takes photo every time I close the cover of its case. When I close the cover - it really does take a picture and saves a photo. Luckly, it make a click, and pictures are seen in the photo album, and it does not appear to be forwarding.

When I close the cover - it really does take a picture and saves a photo. Luckly, it make a click, and pictures are seen in the photo album, and it does not appear to be forwarding. It is just gobbling memory and annoying as I can only delete these pictures one at a time.

It seems to take a picture of the counter top = I do not see the keyboard.
I am wondering ....It may be a kids game app that takes pictures of the screen or out the back camera. I am starting to think it may just be a sound effect when placing the iPad on its screen. So many things that may be unrelated but coincedental. It started in May (the sound) and so did the multiple pictures - starting to think they are not related.
Thanks for the quick tip on deleting multiple pictures.

Does photo stream pictures take space on my computer

does photo stream pictures take space on my computer

Only if you have iPhoto setup to automatically import the Photo Stream photos.
Otherwise they are just on the iCloud server and will be removed after 30 days.
OT

Tried to mirror my iPad to the tv and got sound but no picture. Can run videos but cannot see I pad screen. Looked on support and it said touch the mirror button but I have no mirror button. What am I missing

Tried to mirror my iPad to the tv and got sound but no picture. Can run videos but cannot see I pad screen. Looked on support and it said touch the mirror button but I have no mirror button. What am I missing

Hi Ginger611,
Welcome to the Apple Support Community!
It sounds like you are trying to mirror your iPad to your TV using an Apple TV but don’t see the mirroring option. Please use the attached article for information on setting up AirPlay Mirroring.
iOS: Use AirPlay Mirroring
Cheers,
Joe

C 6180 does not print pictures from camera or computer

C 6180 does not print pictures from camera or computer.

I suggest fixing it
If you would like to give us some information beyond it doe not work there is a a good chance someone can give you more advice on how to fix it
Like what version of iPhoto - what happens, error messages, any strange that has happened, etc
Just remember we are users just like you who know nothing except what you tell us so details are critical
LN

Why does photoshop download pictures automatically off the internet that I don't want?

why does photoshop download pictures automatically off the internet that I don't want?

Where are the pictures coming from? I would more likely believe that your system has a virus than photoshop, but without more information, I could be misinterpreting your post.

Re: Camera. I can zoom in or out when taking pictures. When taking videos I can not find this option. Does it exist? Thanks.

Re: Camera. I can zoom in or out when taking pictures. When taking videos I can not find this option. Does it exist? Thanks.

On iOS 5? Yes it does, you just have to pinch like u would to make page bigger in safari for example.

I have the kin 2 and whenever I turn it on, it does the introduction (pictures, ect.) and the pictures go on for about 3 minuets. but then when it is done, the screan turns blank. is there any way to fix this problem?

I have the kin 2 and whenever I turn it on, it does the introduction (pictures, ect.) and the pictures go on for about 3 minuets. but then when it is done, the screan turns blank. is there any way to fix this problem?

I have the EXACT same problem. I just got done talking with Verizon, and a replacement is on the way.

Does Encore support "Picture-in-picture" (PiP or Secondary Video)?

Similar Messages

Maybe you are looking for