Does Endeca Server(Mdex) in latitude support East Asian languages?

Hi,
we're on latitude 2.2.2
the Mdex engine in Latitude is different from the one in Infront, without Basic RLP to do the indexing and word segmentation for East Asian Language. In this way latitude cannot support Chinese or Japanese keyword search. is this correct?
If so, can endeca server integrate with Basic and how to do it?
Thanks!
Flo

Flo,
1. I'm not aware how a third-party language engine could be integrated into Latitude/Information Discovery. We certainly don't document it or supported it.
2. Studio 2.2 or 2.3 cannot use Infront MDEX as a data source. The reason is that the API used by Studio to make calls to the MDEX must be compatible with the interface on that MDEX. So in the case you mention, you would have an MDEX 7 API (in Studio) trying to make calls to an MDEX (InFront) that supports only MDEX 6 API calls. Therefore, the versions of both Studio and the MDEX must always match (as listed in the Install Guide).

Similar Messages

Can't Input East Asian Language Into Page

Hello all,
I'm using an older version of Dreamweaver (4) but it appears
to have the capability to input East Asian (Japanese) language into
the page. I have my computer set up to read and write in Japanese.
I have Dreamweaver set up to allow asian characters, but when I put
it into the page, it comes up as a garbled mess. Is there something
else I need to do? I've tried all three of the Japanese encodings,
and none of them work. I'm running WinXP. Thanks!

JNinja13 wrote:
> I'm using an older version of Dreamweaver (4) but it
appears to have the
> capability to input East Asian (Japanese) language into
the page. I have my
> computer set up to read and write in Japanese. I have
Dreamweaver set up to
> allow asian characters, but when I put it into the page,
it comes up as a
> garbled mess. Is there something else I need to do?
Dreamweaver 4 supports Japanese on a Japanese operating
system, but not
on an English one. If I remember correctly, MX 2004 (or it
might be DW8)
is the earliest version of Dreamweaver to support East Asian
languages
on an English operating system.
It's a long time since I've done it, but I think you might be
able to
get it working on Windows XP by opening Control Panel >
Regional and
Language Options, and then selecting the Advanced tab. In the
section
labelled "Language for non-Unicode programs", select
Japanese, and click
OK. After restarting your computer, Dreamweaver should accept
Japanese
input. Be warned, however, that using this setting might make
the
display in Dreamweaver and some other programs look rather
odd.
David Powers, Adobe Community Expert
Author, "The Essential Guide to Dreamweaver CS3" (friends of
ED)
Author, "PHP Solutions" (friends of ED)
http://foundationphp.com/

Does Weblogic server 9.2 provide support for CRL checking

Does Weblogic server 9.2 provide support for CRL checking?

No, but you can create a custom CertPath provider for your own implementation.
Mike
Weblogic/J2EE Security Blog: http://monduke.com

Does windows server 2012 foundation ed. support sharepoint?

does windows server 2012 foundation ed. support sharepoint?

Based on the feature set, yeah it would support SharePoint 2010, but I wouldn't recommend it. Server 2012 Foundation must be a Domain Controller or in a Workgroup, neither of which are good scenarios for a SharePoint installation.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Inputing East Asian languages on ATV2

I can't type any East Asian languages on apple TV youtube searches. I guess it is possible to use apple remote app with your iphone or ipad and input East Asian languages from those devices? However, I don own an iphone, iPad, or iPod Touch. I bought my ATV2 in Japan and it still won't allow me to input in Japanese characters since the keyboard layout is only in English on ATV2 (even when the language setting on ATV2 is in Japanese). Is there a way to change the keyboard language layout on ATV2? If not, how does Apple even appeal ATV2 in nonWestern markets? Alternatively, is there a software for the PC that works like an apple remote so we can type searches from our computers and have that transmitted to ATV2? It seems odd that you can control ATV2 from iPhone, iPad, or iPod Touch but not directly from a computer. Any suggestions would be greatly appreciated.

Flo,
1. I'm not aware how a third-party language engine could be integrated into Latitude/Information Discovery. We certainly don't document it or supported it.
2. Studio 2.2 or 2.3 cannot use Infront MDEX as a data source. The reason is that the API used by Studio to make calls to the MDEX must be compatible with the interface on that MDEX. So in the case you mention, you would have an MDEX 7 API (in Studio) trying to make calls to an MDEX (InFront) that supports only MDEX 6 API calls. Therefore, the versions of both Studio and the MDEX must always match (as listed in the Install Guide).

Itunes 10: East Asian languages displayed as boxes in certain areas

I just got a new computer, and moved all my music to my new computer, and installed Itunes 10. But for some reason, if I try to edit my song's info (Right click on song, 'Get Info') the titles and everything that's in another language displays as boxes. The song title itself when in Itunes displays properly, but only in the 'Get Info' box does all my Chinese, Japanese, and Korean song information turn into little boxes. It's not my computer's problem, as it displays all these languages properly. The problem lies with Itunes, but none of the help topics really do anything. Can anyone help me out please?
If you didn't really understand my explanation, here are some pictures:
[IMG]http://i53.tinypic.com/35n0i02.jpg[/IMG]
[IMG]http://i55.tinypic.com/ojo1i0.jpg[/IMG]
As you can see, boxes in the info editing areas, but everywhere else, it displays properly.
Thank you for your help!

In case anyone else comes across this problem -
It turns out that the fontconfig.properties approach is a bit of a red herring (at least in this example).
I've resolved the issue by adding a method to my bean to specify a different font for english and chinese language users. For chinese language users I specify Font = "Simsun-18030" and for each AWT component explicitly setFont( new Font( "Simsun-18030", Font.PLAIN, 14 ) ) Now AWT components displaying chinese characters are rendered correctly with no need to modify any config files on the client PC.
- NB font appears smaller for pointsize than english fonts.
- Using "SimSun" as the font also works but text in english is not displayed very clearly
- On windows you must install east asian language support for this to work (Start -Run - intl.cpl - languages tab)

Vertical Text for East Asian Languages?

You know how East Asian languages (in my case Japanese), can be written vertically? They go down from top to bottom, in columns that go from right-to- left. Does anyone know is Pages supports this?

You know how East Asian languages (in my case Japanese), can be written vertically? They go down from top to bottom, in columns that go from right-to- left. Does anyone know is Pages supports this?
No, Pages does not. You would need to use MS Office, NeoOffice, OpenOffice, or LightwayText/iText Pro (plus the Japanese version of Adobe InDesign).

Support for Asian Languages

Well, it looks like support for Asian Languages in Dynamic
Textfields wasn't included in this version as well. I have a simple
flash file embeded in an html file with 2 text boxes. Here's the
code I'm using:
var strJapanese = "あらわせて"
var strChinese = "我想你";
japanese_txt.text = strJapanese;
chinese_txt.text = strChinese;
I currently have these fonts installed in the \Windows\Fonts\
directory:
mingliu.ttc
msgothic.ttc
but all I see is a bunch of squares in the text boxes. I have
verified that my pocket pc can use these fonts in other programs.
Any ideas?
Thanks,
BackBayChef

I used both the options but no one helps. Check the images for the understanding the problam. I try Arial unicode ms as other font but it does give correct visiblity of font.
tell some another option.

Adding East Asian Language Pack

[I stupidly posted this in the Bold forum. Reposting here, where this topic obviously belongs.]
Hi, all,
I've read the BlackBerry KB on how to install the East Asian Language packs on my BlackBerry. But I am still confused. The directions say:
Open BlackBerry Desktop Manager.
Connect the BlackBerry smartphone.
Select Applications.
From the Install/Remove Application screen select East Asian Language and Input Support.
Click Start. The installation will begin.
But clicking the "Applications" button brings up a window that manages third-party applications, not BlackBerry applications and extensions. It shows all of the third-party applications I have installed (Evernote, Google Maps, WhatsApp, etc.).
There is a "+" button on the left of this applications window, but that brings me to a Finder window to search for files on my Mac. There is a "Start" button, but pressing that without changing checkboxes next to the applications raises the following error: "BlackBerry Desktop Software failed to validate your BlackBerry device update. Aborting install due to validation failure. Some packages contain unsatisfied dependencies."
So, it seems that the KB instructions are incomplete. Exactly where do I see the "East Asian Language and Input Support" option on my Mac BlackBerry Desktop Sofware? Perhaps I am supposed to use Finder to browse to some location on my Mac select an East Asian Pack file?

Hello drummonds,
Is your Mac connected to an internet connection?
Is your device unlocked and you are using a different carrier than that of the one branded to your device?
Backup your device data and reinstall your software as shown in KB19915; once the reload completes try going back into the Add/Remove applications tab.
Let me know how you make out.
-HMthePirate
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

South east Asian language pack

i would like to ask where can i download chinese language pack for my torch since my phone was bought in uk...? and how can i install it to my phone?
many thx!

Hi seranhui
Welcome to the Community
There are already many threads related to your Query .In order to Install Chinese Language pack you had to Download and Install An All Language OS pack on your device which will allow you Chinese language.If you want it you can try It this way :
First remove any OS pack from your PC or laptop then
1. Download the All Language OS pack from here and Install it in your PC or Laptop Carriers
(make sure you are downloading for the same model as you have )
2. Download and install the latest BlackBerry desktop software from here BlackBerry desktop software
Then using desktop software perform your full backup of your device.
3.Search your C: drive for Vendor.xml and delete them, there may be one or two vendor.xml ( On your Pc change your folders option to show hidden files/folders ) :
C:\Program Files (x86)\Common Files\Research In Motion\AppLoader
C:\Users\Windows UserName\AppData\Roaming\Research In Motion\BlackBerry\Loader XML
5. Go to C:\Program Files\Common Files\Research In Motion\AppLoader. (For 64-bit Vista or Windows 7, the path will be C: > Program Files x86 > Common Files > Research In Motion > AppLoader) double click Loader.exe.
Upgrade will continue then After Installation of New OS restore your backup from BlackBerry desktop
Software.
Then Connect your Device to BlackBerry Desktop Software then using Application loader you can add Chinese input on your device.
KB17208 : How to install and configure East Asian language packs on a BlackBerry smartphone.
KB05305 :Localization support for BlackBerry smartphone
Try it and I hope you will be able to achieve your end result
Prince
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

HOW TO: Install East Asian Language Pack on Blackberry 9780

Hello!
I bought a new Blackberry and want to install Korean, Chinese and Japanese on it A.K.A the East Asian Language Pack. I previously had a Blackberry 8520 and installed the language pack successfully by following this tutorial. I thought that it would work if I tried it with my new phone but it doesn't.
I tried using .JAR files by transferring directly on my phone and installing it from there, but no results. I also tried using .COD and .ALX files but there were no results! I'm confused because the other languages such as English and French appear if I use Desktop Manager or Desktop Software but it doesn't show ANY East Asian languages at all.
Can anyone please help me resolve this problem?
My phone details are as follow:
Blackberry 9780
6.0 Bundle 2647 (v6.0.0.600, Platform 6.6.0.223)
Network: T-Mobile
Bought from: Carphone Warehouse
Thank you!

Hey Ld0ttx,
Sorry for the delay in replying.
T-Mobile UK does not have east asian language pack for the BlackBerry Bold 9780. This is carrier specific though, some other network service providers may have the language pack but the BlackBerry will have to branded for the other provider.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

HOW TO INSTALL IME FOR EAST ASIAN LANGUAGE? (I DON HAVE THE WINDOWS XP CD WHEN I BOUGHT IT)

HOW TO INSTALL INPUT MEDIA EDITOR (IME) FOR EAST ASIAN LANGUAGE? (I DON HAVE THE WINDOWS XP CD WHEN I BOUGHT IT)
Message Edited by kw5129 on 05-20-2009 04:34 AM
Solved!
Go to Solution.

On the Ideapad netbooks with Windows XP preloaded, the installation files are on the hard drive.
IME is built into Windows XP and can be enabled following these instructions
Hans
Message Edited by hpholm on 21-05-2009 12:03 AM

Endeca.Data.ConnectionException: Could not connect to Endeca Server/MDEX Engine. I am using MDEX 6.4.1. Getting a 404 Error.

Hi,
I am new to Endeca. We have an Endeca DEV server, MDEX 6.4.1. Forge is running fine. I am able to connect to the Orange App and getting the products. http://devmachine:8006/endeca_jspref/controller.jsp (with servername and Port: 15001)
Even tried to connect to get an existing record GetProduct("256782") and still getting the same 404 error. "{"Error reading from the connection.The remote server returned an error: (404) Not Found."}". I could not get why it could not connect to the Server.
Please find below the sample code in C#, I am using to connect and get the records. I tried Web Service approach an could connect too but did not have a cle on how to implement the typeahead with web services. Please find sample code below. It would be great if someone can assist me.
===============
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Configuration;
using Endeca.Data;
using Endeca.Data.Provider.PresentationApi;
using Endeca.Web;
using Endeca.Web.Url;
using System.Web;
using Endeca.Navigation;
using Endeca.Data.Content.Navigation;
using System.Xml.XPath;
using GroceryNav;
using System.Collections;
//using Endeca.EndecaMdex;
//using Endeca.EndecaDBT;
namespace Endeca
    class Program
        public const string ServerName = "devmachine";
        static void Main(string[] args)
            string sSearchTerm = string.Empty;
            //EndecaNavDTO objEndecaNav = new EndecaNavDTO();
            PresentationApiConnection objConnection = new PresentationApiConnection(ServerName, 15001);
            //PresentationApiConnection objConnection = new PresentationApiConnection("localhost", 15000);
            ArrayList arr = SearchTypeAhead("wine");
            //var record = GetProduct("250000068");
        public static ArrayList SearchTypeAhead(string q)
            ArrayList objResultArray = new ArrayList();
            CompoundDimensionSearchResult objResult = PerformCompoundDimensionSearch(q);
            foreach (DimensionValueCollection objDimValCollection in objResult.CompoundDimensionValues)
                for (int iCount = 0; iCount < objDimValCollection.Count; iCount++)
                    Endeca.Data.DimensionValue dval = objDimValCollection[iCount];
                    var vtypeaheadResult = new
                        text = dval.DisplayName,
                        urlParams = dval.DisplayName
                    objResultArray.Add(vtypeaheadResult);
            return objResultArray;
        public static CompoundDimensionSearchResult PerformCompoundDimensionSearch(string sQuery)
            PresentationApiConnection objConnection = new PresentationApiConnection(ServerName, 15001);
            CompoundDimensionSearchCommand objDimensionSearch = new CompoundDimensionSearchCommand(objConnection);
            objDimensionSearch.DimensionValuesPerDimension = 4;
            objDimensionSearch.SearchTerms = sQuery + "*";
            CompoundDimensionSearchResult objDimSearchResult = objDimensionSearch.Execute();
            return objDimSearchResult;
        public static Record GetProduct(string sProductKey)
            PresentationApiConnection objConnection = new PresentationApiConnection(ServerName, 15001);
            //Instantiate record details command, we need it to generate SEO Urls for records
            RecordDetailsCommand recCmd = new RecordDetailsCommand(objConnection);
            recCmd.ID = "rec";
            recCmd.Identifier = sProductKey;
            Record objRecord = recCmd.Execute();
            return objRecord;

Yes, I have the same problem. Don't know what the problem is. I think it has got something to do with your ethernet connection. Also when I change the network type from network bridge to NAT the error message change to the first numbers of my IP. And when I disable the network connection I get the MAC id.

Does Mac OS 10.8.2 support dictionary in language other than English.

Does Dictionary in Safari and Mail support language other than English (say Chinese and Japanese)? In iOS, I can simply highlight a word, press "Define" and boom...result is there. But in Mac OS, I tried highlighting Chinese and Japanese words, dictionary replied with "Result not found". Is this a setting issue or foreign language dictionary is not yet available in 10.8.2? Thanks!

Wow.....that's fantastic! I couldn't understand a word from my supplier before. Now it works, thanks Tom!

East Asian language support for adding closed captions (Japanese)

I am trying to add Japanese subtitles to my project as closed captions. However, once added the Japanese captions show as little white boxes in the preview pane.
Is there no way to add Asian language support so it displays?
I am using Premiere Pro CC (US English version although I am located in Japan).

Hello drummonds,
Is your Mac connected to an internet connection?
Is your device unlocked and you are using a different carrier than that of the one branded to your device?
Backup your device data and reinstall your software as shown in KB19915; once the reload completes try going back into the Add/Remove applications tab.
Let me know how you make out.
-HMthePirate
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Does Endeca Server(Mdex) in latitude support East Asian languages?

Similar Messages

Maybe you are looking for