Does Equipment carries Inovice deatils to CRM system during replication

Dear all,
Does equipment master data carries invoice details into SAP CRM system. If so in which table these values get stored.
Kindly help me.
Your help will be highly appreciated.
Best regards,
Raghu ram

Hi Raghu,
Equipment master doesnt carry the invoice details to SAP CRM.
Hope this helps.
Regards,
Chandrakant
Edited by: Chandrakant A on Feb 8, 2010 8:05 PM

Similar Messages

Difference between SMQ1 and RSA7 in CRM system?

We all know that in R3 systems and for LO Cookpit applications, SMQ1 can display outbound queue which usually contains the updated records on R3 systems for LO Cookpit application data and then after scheduled V3 job, these updated records on R3 systems can be moved from the outbound queue (SMQ1) to Delta queue (RSA7) and wait for BW Delta extraction.
However in CRM systems, there should be no such scheduled V3 job, does that mean SMQ1 = RSA7 in CRM systems, or in other words, both T-Codes or the Outbound queue (SMQ1) and the Delta queue (RSA7) show the same updated records and wait for BW extraction?
Anyone's answer is greatly appreciated!

Hi
RSA7 will hold the delta records nothing but delta queue.But in SMQ1 is used to delete the entries(data) in the delta Queue.
Thanks
Ajay

Probelm in QA CRM SYSTEM?

Hi,
We are implementing B2B ISA 4.0 SP07. We have problem log in to the User Management Tool. The error thrown is "Logon is invalid; check your entries". We are unable to find out the exact roles and autorization
that need to be set for the users to be able to access the UM tool.We also like to know the BADI/BAPI/Functional Module that is being
called from UM tool to the SAP CRM system during this initial log on to
the tool. Also note that the XCM scenario is set the
base "isauseradmWithPortal". Also not that we are able to log in to shop management and web catalog management. The issue is only with the User Management.
Please respond to this ASAP.
Thank You
Vasu

Hi,
Please check the Internet Sales B2B Best Practices guide for the profiles that would be required. Also, there is a Best Practices guide which talks on the authorizations as well.
Please check the same.
Regards TVS

Does IPC require an SAP CRM system ?

Hello,
we need to install the SAP Internet Pricing and Configurator (IPC).
Does this IPC require a CRM landscape ? As we have ERP usage type...
Many thanks!

Hi Raghvendra,
Open ur CRM system configuration from portal
system administration -> system configuration
locate ur CRM system under portal content and
Right click on crm system open->object.
now Under Property Editor from property catogory select ISA B2B (internet sales B2B application)
ISA B2B Description --> description.
ISA B2B host name ---> j2ee_host.domain.com:port
ISA B2B path ---> /b2b/b2b/init.do
ISA B2B Protocol--->http
Hope this helps.
Rgds,
Vivek
PS: Pl reward points if found useful

Create Transaction (of CRM system) as Receiver thru "RSBBS" TCode for query

Hello,
My requirement is to Jump to a SAP-CRM transaction from a BEx query.
Thru TCode : RSBBS, I selected "TRANSACTION" as receiver of a query, then I selected "CROCLNT002" as the source, then in the Report field I gave the SAP-CRM Transaction "crmd_order" and selected OK.
Then, I tried to execute the query thru Web, On the Context Menu's 'Go To' property, I clicked on the Transaction, It gives me the following errors:
"No Web server maintained for the presentation of log. system CROCLNT002"
"Jump target cannot be executed"
" An error occurred with the report to report interface during the jump"
Do I need to execute some other steps also in order for this to function smoothly. Thanks to help me in understanding the loop hole.
Best Regards,
Sumita

Sumita,
This is 'coz your CRM client CR0CLNT002 might be a WINGUI and not a WEBGUI interface. CRM does provide a WEBGUI for its CRM 4.0 or later if you need to be jump to a transaction from Web report.
You can jump to a WINGUI from a BEx report as an alternative. So you will have to make a choice.
Doniv

Error while downloading Contacts from R/3 to CRM system

Hi All,
I am trying to download Contacts from R/3 to CRM system.
Through Initial Download. For this i have set filters through Tcode: R3AC1
as on KNVP and KNVV for the field VKORG.
As we have our requirement to download contacts based on or differentiating
on 'Sales Org".
We have downloaded our Accounts properly without any errors.
But for Contacts we are facing issues such as one or more extra
relationships are getting created between Contacts and Accounts other than
its original Contacts.
Means already existing contacts are creating more relationships after
download.
But a unique feature is visible for all, All those with false
contact-account relationships.
Contact has field value for 'Address type' missing while the same address
type field is properly added for correct relationships. ( please find attached the screenshot of the same)
Any pointers in which direction we should proceed for the solution would be
appreciated.
Thanks in advance.
Cheers,
Sharad

Dear Vimal,
Sorry not sure then...
Sometimes the RFC connection is refused and use to give that particular error messgae due to:
The old RFC library having version 6.20 automatically converted the
password into uppercase with a size limit of 8 characters before sending it to the SAP system.
The RFC library version 6.40 does not perform this conversion any more, because mixed case passwords upto 40 characters are now supported by SAP Basis version 7.00 (eg. NW2004s) and above.
So need to use upper case passwords when connecting to an SAP system having version less than 7.00.
But this is not valid in this scenario.
Thanks,
Atin

IDoc Issues when creating a Sales Order in CRM System

Hi All,
We have a BSP application in place which allows the customers to create orders online. This BSP application is linked to R/3. The R/3 BSP application remotely calls a custom code in the CRM system which creates an IDOC for the CRM Order and the IDOC is processed and a CRM Order gets created. In the BSP page we have given a provision to the client to enter a Requested Delivery Date which is mapped to the delivery date in CRM system.
Now comes the problem. When the customer creates an order, he enters the requested delivery date but the order which is getting created is not being populated with the date entered in the screen but with the current date.
But when I try and reprocess the IDOC through WE19 without changing any IDOC data records the order gets created with the date which was entered in the webpage.
Any pointers regarding what is happening?
Regards,
Karthik

Hi Karthik,
Just check on the field date, this request delivery date in CRM.
Does it come from date profile? If it does, then try to remove the
date rule or any default value for this date.
Alternatively, I am afraid you have to separately save the date
after first IDOC document creation is done. Seems that the default
value taken place (and replaced) after the document has created.
Hope this helps.
Gun.

Upload of Campaign and Leads from flat file into SAP CRM system

Hi Gurus,
We need to upload Campaign and Leads from our legacy systems to SAP CRM systems. The source data will be available in the form of flat files (tab delimited)
Please let me know the possible ways of doing this.
Reward points are assured.
Thanks in advance.

Hi
you can use external list management functionality in CRM 5.0 useing the flat file tab delimited you can upload the contacts and create business partners followed by lead transaction types with business partners created and also external list management will allow you to create target groups for executing the campaigns in SAP CRM
please do reward points if helpful
regards
Dinaker vikas

CIC0 - CRM system requests user name and password

Hi folks,
I am a BASIS gui am facing a peculiar problem with our production CRM system. It is a CRM 5.0 system and we have no java stack . The customer service users have reported on a daily basis when they are logged into CRM system and working with CIC0 transaction for several hours, suddenly a pop up comes up stating
"The server <CRM server server name> is requesting that a user name and password be sent in an insecure manner (basic authentication without a secure connection) "
This is happening when a user logged on the CRM system itself. There is no java stack on this system, pure ABAP system. When this popup comes up, the user then puts his/her user name and password and hits ok and is able to continue with work only to be interrupted the next day in the middle of work. So they are able to login , keep doing their for hours and suddenly are asked to revalidate their user name and password.
1. If the user is logged in for several hours and is working fine, what happens suddenly that the user name, password is forgotten and requires to be re-inputted?
2. Is this related to the browser? But the users only work on CIC0 abap system, they do not open a browser , and this is not via portal or a web-ic link...this is all pure abap login via a sapgui.
3. I have copied the same user and am testing to see if the pop up pops up on me...but so far this pop up is not comming up for me....can this be related to user's local desktop windows or browser settingis there any password cache setting ..if so does it mean every time user tries CIC0, a cached password is sent to the server ......I am confounded ...where is the issue, what settings is this related to...
Thanks for any help...
regards, Vikram

Hello Vikram,
Apparently CIC0 makes use of WAS which requires separate authentication. This can possibly explain this issue. Just check if you have maintained the local SSL certificate. Also ensure SSO is also in place. Check STRUSTSSO2 for this.
Regards.
Ruchit.

An Inquiry Document is to be created in ECC from CRM system

Hi Friends,
An Inquiry Document is to be created in ECC when an project opportunity is created and the phase of the opportunity is Quotation Stage in CRM system using Tcode CRMD_ORDER.
So the scenario is when i create project opportunity and save it in the CRM,while saving at the same time i need to create Inquiry document in ECC system using BAPI "BAPI_INQUIRY_CREATEFROMDATA".
So can any one suggest me where should i need to call the BAPI , what parameters i need to pass ,
It would be helpful for me if any one help me out.
Regards
Raghavendra Prasad
Message was edited by:
Raghavendra Prasad

I actually followed your blog and developed a sample application
How to create SAPUI5 application consuming Gateway service with the help of SAP NW Gateway Plug-in for Eclipse
Can you please explain below :
1) I was getting an UI like this , but in example you provide you achieved a table like UI. May i know the reason behind this?
How can i achieve the UI as in blog?
my result
example in blog result
2) The result i achieved is not responsive. When i change the size of my browser the UI design does nt adjust itself.
How to make this responsive?

Tool to transfer data from one CRM system to another

Hi,
We are merging one CRM system into another and need to transfer master data and transactions from one CRM system into the another. What are the options/tools that are available for data migration in CRM 7.0?
Please share experiences/thoughts if you have moved data into SAP CRM from legacy/other SAP CRM systems.
Regards
Dan

Hi Dan,
Looking at your post - I decipher that you would be doing download from a lower version of SAP CRM system to SAP CRM 7 if this is the scenario then you have an advantage as you could employ standard SAP CRM middleware which is a powerful application to download master data from older version to new version, or else you could ALE the master data. Now this being the simple part we move on to the harder part of the migration which is transactional data - namely elements such as Number ranges, document flow, relationships, condition data tables .....etc if you are migrating this from lower SAP CRM version here you would have to understand the interlinking with R/3 or ECC6 in any case you would have to do a fresh implementations but on the whole there are some way outs for examples ; But still let me know how you intend to migrate and what are systems we are talking about.
With compliments,
Tarovar.

Exception in CRM system after creating post goods issue in ECC

Hi Folks,
We are facing an issue in CRM system. I will tell the scenario in details so that it would be helpful to understand,
We are creating sales order in CRM system and it got replicated to ECC correctly. We have maintained action definition to trigger email to the customer.
Then we will be creating delivery and then post goods issue(PGI) for items replicated to ECC systems. After PGI system will update the status in CRM sales order and here configured an action definition to trigger an email to customer.
We have created custom badi implementations for action definition execute badi to send email. Emails are triggering correctly but after PGI creation while replicating the changes from ECC to CRM we are getting an exception in standard code because PPFTTRIGG table does not have entry. We have failed entry in CRM inbound queue and then did some debug and come to know the place of issue. Help me out with some inputs here.
Best Regards,
Dharmakasi.

Hi,
I have identified one thing here, if the action definition does not have start condition system is not updating that entry in PPFTTRIGG table. Here i got 2 questions my mind
1. Why system is not updating the table with all the action definitions available in action profile
2. Why system is looking for the entry which was not updated in PPFTTRIGG table?
I do not understand problem with updating table or with action profile itself. Please give some input here. If we deactivate all the definitions which does not have start condition then there is no error.
Best Regards,
Dharmakasi.

Connecting multiple CRM systems to one backend R/3 and vice versa

Hello experts
Can you tell me whether it is advisable to connect 2 CRM systems to a single backend R/3 and vice versa? Is it recommended by SAP? I require some notes or docs on this. I got some notes on this forum but they are all Internal ones which I am unable to see.
Please help!
Warm Regards
Debolina

Hi,
Though SAP does not recommend connecting multiple systems to one ECC backend. But still it has designed a procedure to achieve this.
Here is the excerpts of the steps required.
1. Execute report MCRM_SETTINGS for each CRM system connected to the ERP
system.
2. Check the entries of the table CRMRFCPAR of the connected ERP system:
The field REM_LOGSYS should be filled for every entry marked with
u2018Created by the MCRM reportu2019.
3. Activate the corresponding consumers in the table CRMCONSUM
(transaction SM30).
4. Internal and external number ranges for Business Partners have to be aligned
manually.
Hope it helps you!!!!
Good Luck.
Pardeep

One ECC Connected to multiple CRM systems

Hello,
We have a scenario where we have single R/3 system (ECC) connected to multiple CRM systems. I would be obliged if someone can send me some documentation on tht.
Also if we are creating an order in ECC, two queues are generated which I think is wrong. Can someone give me some advice on this.
Thanks & Regards
Priyanka

Hello Pratik,
I would define two different systems in ECC. In such a case, if say I create one material in R/3 (ECC) then should it generate two diffrent queues for flow to CRM.
Also if say the CRM Release etc for the two systems connected to one R/3 are not the same, then how do i take care of the entries in the ECC Config tables for replication i.e CRMFILTAB, CRMCONSUM, CRMPAROLTP etc.
And how does the ECC system identify what settings it has to take for what CRM system and what queues have to be generated? What are the queues to be registered in CRM and ECC in such a case.
Would be obliged if you can give me a more detailed advice.
Rgds
Priyanka

Standard Interface for CRM System

: What standard interface does the CRM system expose to XI? For e.g. Standard IDocs or BAPI? If yes give details about the same. If NO standard IDocs / BAPI are available then do we need to write one?

Gareth,
CRM has an external interface adapter (XIF) that can send all CRM DATA to external systems. You only need to setup an RFC-destination, a XIF-site (much like the R/3 site), subscribe to the data that you want and indicate the interface format. You can choose between Idocs and XML.
The XML will be send directly to the XI. If you choose idocs, you'll have to setup an outbound idoc profile and an outbound port to interface the idocs to the XI system.
Example: suppose that you subscribe business partners to the XI-site in an XML format, then CRM will send all business partner changes to the IP address of the XI.
Grtz,
Michael.

Does Equipment carries Inovice deatils to CRM system during replication

Similar Messages

Maybe you are looking for