Does Ethernet/IP Industrial Protocol support RSLogix5000?

The ethernetip.zip protocol looks like just what I need for communicating between Fieldpoint and my PLC... Does the protocol support the RSLogix5000?

You might want to just post a comment in the NI Labs asking the same thing, as the author of the software will get a notification that someone has posted a comment, and they may know the answer for you. Unfortunately, I am not familiar with that particular software.
Rob K
Measurements Mechanical Engineer (C-Series, USB X-Series)
National Instruments
CompactRIO Developers Guide
CompactRIO Out of the Box Video

Similar Messages

LabView con Ethernet IP (Industrial Protocol)

Buenos días, una pregunta:
Quiero conectar algunas electroválvulas remotas que trabajan con Ethernet IP (Ethernet Industrial Protocol), ¿LabView puede trabajar con este protocolo?.
Solved!
Go to Solution.

The correct discussion forum for this

Oracle Linux-SNA Protocol support

Hello,
We have developed the product with client server architecture with client and server has capability to talk with each other
using either TCP/IP or IBM SNA protocol. Our application is an 32 bit application.
We now need to check whether the Oracle Linux has capability to support SNA protocol.
Can you please let us know whether the following the Oracle linux versions (*Oracle 5 64-bit, Oracle 5 32-bit, Oracle 6 64-bit, Oracle 6 32-bit*) has capability to support SNA protocol?
Thanks in advance.
Regards,
Dayakar
Edited by: user618976 on Nov 14, 2011 1:37 AM

user618976 wrote:
Do we have any document/reference stating the Oracle Linux does not provide SNA protocol support?I have not see the converse - any documentation from Oracle that Oracle Linux (OL) does support SNA. There are no specific SNA download components for OL at Oracle's edelivery site, and not Metalink/Support note found on this subject matter when searching for "Linux" and "SNA protocol".
Oracle itself do (or did) support Gateway products using SNA. From the few support notes on the topic, it seems that these are pretty old and refer to deprecated s/w.
I would be surprised if OL supports SNA. Or even IPX for that matter. IPv4 and IPV6 are the definitive standards. For fabric layers, there are the various Infiniband protocols (SRP, RDMA, RDS, etc). It's hard to see SNA or something like IPX featuring in this.
Best would be to ask this question to Oracle sales/marketing directly. Neither Dude or I work for Oracle and we've only conveyed our opinions in this regard.

Airport Extreme with Gigabit Ethernet - Does it have jumbo frame support?

Please, can I get definite answer to this question? I do not need speculations as I read some reviews already. Can we have Apple finally put complete specification of the product rather than "popular one" with attachement of protocol numbers?
I just need simple answer possibly from Apple engineering team to the following questions:
1. Does current Airport Extreme have support for jumbo frames (everything above 1500bytes per frame)? (if one does not know what that is them perhaps understanding acronym "MTU" can help a bit)
2. If there is support then what is the maximum supported size of jumbo frame? (Some products do not go above 6k and I read some statistics that traffic somwhere is usually 66% at about 4k jumbo frames and above that there is not much...)
3. If there is no support then does Apple plan on update for this (firmware or hardware) in the future?
Please, do not tell me that someoene ran something with jumbo frame and it worked as I tried yesterday LaCie Ethernet drive with supposedly setup (I set it myself) of jumbo frame 4k and on soft reboot of the drive it worked when connected to Airp[ort Extreme, but after hard reboot the disk is not visible anymore. I will recover the disk, but I need to understand if I have chance of using jumbo frames that tremendously improve performance with large files (e.g. try movies stored for AppleTV on network drive) when using Airport Extreme with its gigabit Ethernet... or that is just Gigabit Ethernet for product marketing purposes only.
I just need reliable answer by product specification that should be on paper at Apple, but it is not so I hope that one of guys here has access to some engineering team.
Thank you,
Maciek Samsel

The spec. on the chip used by Apple support your conclusion.
BCM5395 Features
Complies with IEEE802.3, IEEE802.3u, IEEE802.3ab standards
5 10/100/1000Mbps Auto-Sense RJ45 ports supporting Auto-MDI/MDIX
All ports Support Full/Half Duplex transfer mode for 10/100Mbps and Full Duplex transfer mode for 1000Mbps
Port-based and MAC-based VLAN
IEEE 802.1Q-based VLAN with 4K entries
Port-based rate control
Port mirroring
Compact field processor (CFP)
512 rules
Filtering, classifications, remarking, and priority actions.
Priority modification on egress
DOS Attack Prevention
Loop detection for unmanaged configurations with Broadcom’s patented LoopDTech™ technology
CableChecker™ with unmanaged mode support
Double tagging
IEEE 802.3x programmable per-port flow control and back pressure, with IEEE 802.1x support for secure user authentication
4K entry MAC address table with automatic learning and aging
128-KB packet buffer
128 multicast group support
Jumbo Frame support up to 9728 byte

Why does iMac (Mid 2012) not support Jumbo Frames?

Why is it not possible to change MTU size to more than 1500? Buying such a high quality product, I would expect that it supports jumbo frames!
My NAS supports jumbo frames, the Air Port Extreme does but a brand new iMac doesn't???
Is there any patch or somethin to fix this?
Thanks!!!

Hi Marcus,
I find conflicting info on this...
The Ethernet port supports the configuration of Ethernet frames larger than 1,500 MTU (Maximum Transmission Unit).
http://support.apple.com/kb/HT4619
Can anyone confirm if the new 2011 imacs already support jumbo frames? I heard it now uses a new broadcom ethernet chip that now supports jumbo frames on the 21 inch model. They removed jumbo frames support in the previous i5 and i7 models...
Hmm, I remember that the iFix tear down revealed that the 2011 iMacs had a Broadcom BCM57765B0KMLG Eithernet chip. (just go to the page and if you are using safari/firefox press command + F and type "Broadcom" to jump to that particular)
http://www.ifixit.com/Teardown/iMac-...eardown/5485/2
so I did a little googling and found out that:
http://www.broadcom.com/products/Eth...lient/BCM57765
Integrated 10/100/1000BASE-T transceiver with:
- 10/100/1000BASE-T triple-speed MAC
- Compliant with IEEE standards
- Compliant with IEEE 802.3az draft standard for Energy Efficient Ethernet™ (EEE)
- State-of-the-art physical layer interface that exceeds IEEE requirements
- Jumbo frame support with up to 9.6 KB frame size
- EthernetAV protocols with IEEE 802.1AS, 1588-2008, IEEE P802.1Qat and IEEE P802.1Qav support
So it should support Jumbo Frames.
http://www.philmug.ph/forum/f23/new-imac-early-2011-sandy-bridge-processors-7106 4/index8.html
Originally Posted by mpe
At least mine doesn't
Weird. My 27" 3.1GHz iMac that was delivered yesterday supports jumbo frames fine. I was quite concerned that it wouldn't because I rely on them for good performance with my NAS
I set it using System Preferences -> Ethernet -> Advanced -> Ethernet -> Configure Manually.
I've confirmed the setting by checking the output of ifconfig. It shows an mtu value of 9000.
http://forums.macrumors.com/showthread.php?t=1148176
Some of the 2010 iMacs did not I read.

Does my macbook late 2008 support gigabit internet

does my macbook late 2008 support gagabit internet

Yes, all late 2008 MacBooks support gigabit Ethernet.
Aluminum unibody model specs: http://support.apple.com/kb/sp500
Polycarbonate model specs: http://support.apple.com/kb/SP5

IPSEC tunnel and Routing protocols Support

Hi Everyone,
I read IPSEC does not support Routing Protocols with Site to Site VPN as they both are Layer4.
Does it mean that If Site A has to reach Site B over WAN link we should use Static IP on Site A and Site B Router?
In my home Lab i config Site to Site IPSES VPN and they are working fine using OSPF does this mean that IPSEC supports Routing Protocol?
IF someone can explain me this please?
OSPF config A side
router ospf 1
router-id 3.4.4.4
log-adjacency-changes
area 10 virtual-link 10.4.4.1
passive-interface Vlan10
passive-interface Vlan20
network 3.4.4.4 0.0.0.0 area 0
network 192.168.4.0 0.0.0.255 area 10
network 192.168.5.0 0.0.0.255 area 0
network 192.168.10.0 0.0.0.255 area 0
network 192.168.20.0 0.0.0.255 area 0
network 192.168.30.0 0.0.0.255 area 0
network 192.168.98.0 0.0.0.255 area 0
network 192.168.99.0 0.0.0.255 area 0
3550SMIA#sh ip route
Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
       E1 - OSPF external type 1, E2 - OSPF external type 2
       i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
       ia - IS-IS inter area, * - candidate default, U - per-user static route
       o - ODR, P - periodic downloaded static route
Gateway of last resort is 192.168.5.3 to network 0.0.0.0
O    192.168.12.0/24 [110/13] via 192.168.5.3, 3d17h, FastEthernet0/11
     100.0.0.0/32 is subnetted, 1 subnets
O       100.100.100.100 [110/3] via 192.168.5.3, 3d17h, FastEthernet0/11
     3.0.0.0/8 is variably subnetted, 2 subnets, 2 masks
O       3.3.3.3/32 [110/2] via 192.168.5.3, 3d17h, FastEthernet0/11
C       3.4.4.0/24 is directly connected, Loopback0
C    192.168.30.0/24 is directly connected, Vlan30
     64.0.0.0/32 is subnetted, 1 subnets
O E2    64.59.135.150 [110/300] via 192.168.5.3, 1d09h, FastEthernet0/11
     4.0.0.0/32 is subnetted, 1 subnets
O       4.4.4.4 [110/2] via 192.168.5.3, 3d17h, FastEthernet0/11
C    192.168.10.0/24 is directly connected, Vlan10
     172.31.0.0/24 is subnetted, 4 subnets
O E2    172.31.3.0 [110/300] via 192.168.5.3, 3d17h, FastEthernet0/11
O E2    172.31.2.0 [110/300] via 192.168.5.3, 3d17h, FastEthernet0/11
O E2    172.31.1.0 [110/300] via 192.168.5.3, 3d17h, FastEthernet0/11
O E2    172.31.0.0 [110/300] via 192.168.5.3, 3d17h, FastEthernet0/11
O    192.168.11.0/24 [110/3] via 192.168.5.3, 3d17h, FastEthernet0/11
O    192.168.98.0/24 [110/2] via 192.168.99.1, 3d17h, FastEthernet0/8
C    192.168.99.0/24 is directly connected, FastEthernet0/8
C    192.168.20.0/24 is directly connected, Vlan20
     192.168.5.0/31 is subnetted, 1 subnets
C       192.168.5.2 is directly connected, FastEthernet0/11
C    10.0.0.0/8 is directly connected, Tunnel0
     192.168.6.0/31 is subnetted, 1 subnets
O       192.168.6.2 [110/2] via 192.168.5.3, 3d17h, FastEthernet0/11
O    192.168.1.0/24 [110/13] via 192.168.5.3, 3d17h, FastEthernet0/11
O*E2 0.0.0.0/0 [110/1] via 192.168.5.3, 1d09h, FastEthernet0/11
B Side Config
Side A
router ospf 1
log-adjacency-changes
network 192.168.97.0 0.0.0.255 area 0
network 192.168.98.0 0.0.0.255 area 0
network 192.168.99.0 0.0.0.255 area 0
1811w# sh ip route
Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
       E1 - OSPF external type 1, E2 - OSPF external type 2
       i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
       ia - IS-IS inter area, * - candidate default, U - per-user static route
       o - ODR, P - periodic downloaded static route
Gateway of last resort is 192.168.99.2 to network 0.0.0.0
O    192.168.12.0/24 [110/14] via 192.168.99.2, 3d17h, FastEthernet0
     100.0.0.0/32 is subnetted, 1 subnets
O       100.100.100.100 [110/4] via 192.168.99.2, 3d17h, FastEthernet0
     3.0.0.0/32 is subnetted, 2 subnets
O       3.3.3.3 [110/3] via 192.168.99.2, 3d17h, FastEthernet0
O       3.4.4.4 [110/2] via 192.168.99.2, 3d17h, FastEthernet0
O    192.168.30.0/24 [110/2] via 192.168.99.2, 3d17h, FastEthernet0
     64.0.0.0/32 is subnetted, 1 subnets
O E2    64.59.135.150 [110/300] via 192.168.99.2, 1d09h, FastEthernet0
     4.0.0.0/32 is subnetted, 1 subnets
O       4.4.4.4 [110/3] via 192.168.99.2, 3d17h, FastEthernet0
O    192.168.10.0/24 [110/2] via 192.168.99.2, 3d17h, FastEthernet0
     172.31.0.0/24 is subnetted, 4 subnets
O E2    172.31.3.0 [110/300] via 192.168.99.2, 3d17h, FastEthernet0
O E2    172.31.2.0 [110/300] via 192.168.99.2, 3d17h, FastEthernet0
O E2    172.31.1.0 [110/300] via 192.168.99.2, 3d17h, FastEthernet0
O E2    172.31.0.0 [110/300] via 192.168.99.2, 3d17h, FastEthernet0
O    192.168.11.0/24 [110/4] via 192.168.99.2, 3d17h, FastEthernet0
C    192.168.98.0/24 is directly connected, BVI98
C    192.168.99.0/24 is directly connected, FastEthernet0
O    192.168.20.0/24 [110/2] via 192.168.99.2, 3d17h, FastEthernet0
     192.168.5.0/31 is subnetted, 1 subnets
O       192.168.5.2 [110/2] via 192.168.99.2, 3d17h, FastEthernet0
     192.168.6.0/31 is subnetted, 1 subnets
O       192.168.6.2 [110/3] via 192.168.99.2, 3d17h, FastEthernet0
O    192.168.1.0/24 [110/14] via 192.168.99.2, 3d17h, FastEthernet0
O*E2 0.0.0.0/0 [110/1] via 192.168.99.2, 1d09h, FastEthernet0
Thanks
Mahesh

Hello,
I'm saying crypto maps have a lot of limitations. Tunnel Protection make way more sense
U can configure in 2 ways [ and multicast WILL work over it]
1- GRE over IPSEC
crypto ipsec transform-set aes esp-aes 256 esp-sha-hmac
mode transport
crypto ipsec profile tp
set transform-set aes
int tu1
ip address 255.255.255.252
tunnel source
tunnel destination
tunne protection ipsec profile tp
We have configured mode transport because we encrypt GRE + what ever we encapsule in GRE [ eg OSPF - telnet - http ]
Pros:
We can as well transport IPV6 or CDP
Cons:
4 bytes of overhead due to GRE
2- IP over IPSEC
crypto ipsec transform-set aes esp-aes 256 esp-sha-hmac
mode tunnel
crypto ipsec profile tp
set transform-set aes
int tu1
ip address 255.255.255.252
tunnel source
tunnel destination
tunnel mode ipsec ipv4
tunne protection ipsec profile tp
This config is in fact closer from a crypto map [ from encapsulation standpoint]. The transform-set then NEED to be in tunnel-mode
Pro:
4 bytes overhead less than GRE over IPSEC
Cons:
Cannot transport CDP or MPLS or IPV6. Very limiting IMHO
Cheers
Olivier

Hyper-V 2012 R2 does not disable the protocols on the physical network adapter

Hello,
I have a problem with the creation of an external network in Hyper-V (2012 r2), when I create the external network does not want to share with the host, therefore I take the check to share it. Hyper-V on the network adapter "real" does not disable
all protocols, but active all inclusive TCP4 and 6.
How so?
I have 2 other servers with the same configuration and run regularly.
Thanks in advance

Hi Fabio,
"when I create the external network does not want to share with the host, therefore I take the check to share it. "
Based on my understanding ,after creating a external Vswitch the physical NIC will only have protocol "hyper-v external virtual switch " whatever we check "allow management operation...." or not .
Do you mean after you create the external Vswitch , the physical adapter still have another protocol ?
If yes , my suggestion is to remove the physical NIC from "device manager " , then restart server and reload the driver then create the external Vswitch again .
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Protocols supported by Weblogic

Hi,
How can i connect to weblogic other than t3 protocol?
Does weblogic supports any other J2EE standard protocols??
I am using rmi protocol in my code to connect to weblogic. It is failing.
If any body knows what are all the J2EE standard protocols supported by Web Logic, Let me know
thanks
Suresh

Sir,
<suresh kumar> wrote in message news:[email protected]..
How can i connect to weblogic other than t3 protocol?
Does weblogic supports any other J2EE standard protocols??
I am using rmi protocol in my code to connect to weblogic. It is failing.It is not very likely that it is failing because of t3. It happens to be a pretty
stable thing. May be it is the way you are cooking it.
Do you have any stack traces or error messages that you could kindly share
with us?
Regards,
Slava Imeshev

I want to buy an hp m1536 laserjet for my ipad printing, I believe the printer is not wireless but has sprint. Is the print job going through my wireless router and does that router need to support AirPrint.

I want to buy an hp m1536 laserjet for my ipad printing, I believe the printer is not wireless but has sprint. Is the print job going through my wireless router and does that router need to support AirPrint.

The following model is airprint compatible, is this the one you have?
HP LaserJet Pro M1536dnf MFP
If not the "dnf MFP" model, then no.
The router needs to support the Bonjour protocol. If not, the airprint won't work.

General client/protocol support questions

I'm sure some of this can be answered in the docs, but in the interest of getting a real-world summary, I was wondering if anyone could comment on if (and if so, how) the following are supported by Calendar Server.
* iCalendar (if so, what URL does one use to subscribe or publish a calendar with an icalendar client?)
* WebCAL
* CalDAV/GroupDAV
My focus is to try and identify what clients will really work with CS. I know that the web clients work great, that Lightning works pretty well and Evolution sort of works (I have another post about Evo). But I'm curious about non-WBAC clients like Apple iCal, Sunbird, Kmail/Korganizer, or any other free/OSS clients that might work.
TIA!
-Mike
Edited by: mikelcu on Nov 10, 2007 3:21 PM

Hi,
mikelcu wrote:
* iCalendar (if so, what URL does one use to subscribe or publish a calendar with an icalendar client?)
* WebCAL
* CalDAV/GroupDAV Sun calendar server doesn't support any of these. The calendar server supports WCAP access only.
Work is currently under-way to provide additional protocol support:
http://blogs.sun.com/jpblog/entry/communicate_suites_the_new_client
My focus is to try and identify what clients will really work with CS. I know that the web clients work great, that Lightning works pretty well and Evolution sort of works (I have another post about Evo). But I'm curious about non-WBAC clients like Apple iCal, Sunbird, Kmail/Korganizer, or any other free/OSS clients that might work.The clients that I know of that work are any that support WCAP protocol (which isn't many unfortunately). These include:
Thunderbird, with Lightning WCAP enabled plugin (http://releases.mozilla.org/pub/mozilla.org/calendar/lightning/releases/0.7/lightning-wcap/)
Evolution with WCAP plugin (http://www.go-evolution.org/Evolution_JESCS).
Outlook with Sun Outlook Connector installed.
Sunbird -- although I haven't confirmed this myself (http://www.mozilla.org/projects/calendar/sunbird/)
For Apple iCal there is : http://sourceforge.net/projects/jscalendarsync and http://www.hovenweep.org/~rowan/software/icald.html although I can't comment on how well these work (don't use/own a Apple Mac).
Regards,
Shane.

THE SIM CARD INSERTED IN THIS IPHONE DOES NOT APPEAR TO BE SUPPORTED.....

Hello. I bought on Dec. 17th 2007 at Orange shop in Beausoleil (south France) an iPhone with the option of unlocking the Sim (100 Euro plus). I followed all instructions. Everything was perfect, on Dec. 24th I was able to unlock the iPhone and used with Orange sim, MonacoTelecom sim and Vodafone sim. BUT the iPhone had a problem: when in sleep mode it did't received calls. So Afer 24 hours I stopped to use, UNSAFE. After Christmas holidays I called Apple assistance, they send me UPS and I returned iPhone to Apple (Jan. 4th 2008). I received a NEW iPhone on Jan. 8th 2008, VERY RUSH. Perfect service, I thought (...making terrible error...). The iPhone was LOCKED and I wasn't able to use. Now starts all the problems and for this reason I'm writing.
I called Apple and Orange many times. Orange didn't received the documents from Apple for the changing of IMEI and Serial, for them I had the first iPhone. After many cals finally I asked Apple to send something official for the changing.
....Days goes on and on.......
Every day two times I called Orange, but evert time I received different versions of my situation. Everyday I tried to restore the iPhone but still simlocked.
On Jan.15th after a meeting with a lawyer I decided to make pression to Apple: infact I returned them an unlocked iPhone and I received back a locked one.
I finally was able to speak with a "supervisor" (Mr. F...) and he tried to solve the problem.
On Jan. 16th I spoke with another "supervisor" (Mr. J...) and he told me to make another time the restore, because they changed the firmware.
From now I tried to make the restore many times with Orange sim. Everything seems to go well but when I put another sim on iTunes there is a white page with:
"THE SIM CARD INSERTED IN THIS IPHONE DOES NOT APPEAR TO BE SUPPORTED. Only compatible SIM cards from a supported Carrier may be used to activate iPhone. Please etc etc....".
So the iphone is locked!!! Maybe is country locked, I don't know.
Incredible, unbelievable.
From Apple they told me to wait someting from US, but until now ..... nothing, I received no news from Apple.
The bad situation is that after more than 30 days after the buy I am not able to use the hardware I bought!
I hope that someone from Apple can read this post (sorry if is so long, but with this details I think that in Apple can understand the problem).
I send in warranty an hardware with certain features that I payed to Apple and I received back it with different features.
That's not serious.
After many days, next week I think to go by legal means if Apple France is'nt able to solve the issue.
Many thanks if someone from Apple read my post.
Many thanks if someone help me.

But who has to make another unlock? Orange told me that for them is ok and the phone is unlocked. I read on other pages that Apple has a world-database with Imei numbers. So seems Apple can also do the unlock, even for the fact that they returned me a locked phone, different from the one I sent them. The warranty is with Apple, I forgot to warite in my first post that first of all on Janauary I went to Orange shop where I bought the iPhone but they told me for every problem is Apple that has to solve.

Does Adobe have a tech support contact for Flash on browsers?

I am looking how to escalate to Adobe Tech Support but paying 29 bux an hour for some recruited college Grad that knows to little doesnt suit me.
Bought an HP Quad and it had Win7 home so poorly installed, configured, overloaded with junk, would not backup, when it did backup and create a repair disk they wouldnt restore. HP's preloaded Win7 build both IE8 and Firefox were crashing with both BSOD and Browsers not responding and dying. Firefox never responds to anything, Microsoft indicates is an add on problem but I think it can be a flash issue although it occurs much more on Wiin7 (ANY Version) for 32 or 64 bit. I have been screwing with this for a month screaming at Microsoft and Mozilla but its a waste of time.
Microsoft forums are polluted for Win7 browser BSOD and Browser halting then crashing posts, there answer is disable add-ons. I cant surf the net without add ons so that is a stupid reponse of finger pointing, giving appearance that Msoft, Adobe and Mozilla dont communicate. No company will take ownership and drive the issue to find the root cause and where ever that cause is make them fix it, Msfot, Adobe of Firefox.   so what do ya do?
    The HP PC with horrible preload of win7 finally died and killed the build but Microsoft was equally useless in helping me repair that preloaded junk even though the OS is theres.    I BOUGHT real disks because HP couldnt support the mess - HP couldnt support chewing food let alone the mess they place on PC's with 90% asian parts with old drivers.   Eleven escaltions starting on DAY 1 of ownership of a Pavilion. Hundreds of crash dump error reports sent to Firefox has still gone unresponsed, as they employ the 5th ammendment ,method of silence without support and Msoft remove all add on is laughable but proves HP. Firefox and MicroSoft wont assume responsibilty.
This sucks as all three gloat and boast about a HIGH levels of support and awards won for support but it is all myth, and laughably a lie but I still want it repaired.   28 years in IT - retired I feel qualififed to make the observation.
I never attempted to contact Adobe but I get redirected after seeing the warning about 39 bucks an hour to answer a phone for a freeware add-on.
Does anyone know of have a escalation path to a real person at adobe or department beause tthis site redirects from the ASK Adobe Support link meaning I cant even mail a question to then, Already a BAD sign but the driver is free, but they wrote, and millions are having issue so where is there support - Why bother writing the addon if people cant even ask a question.
So does any know if they support the flash add-on without charging?     a Glitch they might want to know about is flash 10.0.0.1 shows in Win7 Event logs as version 0.0.0.1 and I have logs showing that an addon report from the DEP (Data Execution Service) saw an add-on go to a non executalbe memory region whenthe only add-on I have is flash.
Google for IE8 Browser Crash 566,500, Win7 Browser crash 1,500,000, Firefox crashing 587,000, Firefox flash crash 1,420,000, Adobe flash crash 1,820,000,   are 4,615,500 google posts found for one issue and I know there are more than that failing but Im sick of the whole thing so adobe is my last gasp.   Please respond if you have a fix or path to escalate to adobe.
Thanks.
What a mess that no company so far stands up willing to take ownership of this just to find the root cause.

I don't have a definitive answer, but I would guess you won't find a tech support service dedicated to the Flash Player since it is free software and customers apparently have problems getting tech support for the products they buy. But here are a couple of things worth considering.
Try posting/looking thru the Flash Player forum...
http://forums.adobe.com/community/webplayers/flash_player
Try submitting a bug report...
http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

HT1937 i unlocked my iphone 4 factory and i upgrade to 6.1 when i connect it to itunes it apears The SIM card inserted in this iPhone does not appear to be supported This iPhone is not currently setup to work with carrier you're attempting to use. Please

i unlocked my iphone 4 factory and i upgrade to 6.1 when i connect it to itunes it apears
The SIM card inserted in this iPhone does not appear to be supported
This iPhone is not currently setup to work with carrier you're attempting to use. Please insert another SIM card from a supported carrier or request that this iPhone be unlocked.

It sounds like you or someone else hacked the phone to unlock it. Updating it locked it to the original carrier.
How did you unlock it? The ONLY legitimate way is to ask the carrier it is locked to to unlock it. Any other way requires hacking or jailbreaking the phone.

HT1386 Hi All, I plugged my iPhone into my laptop and I was asked to upgrade my iTunes software. It took more than seven hours and just to be told that my SIM card does not appear to be supported. Since then I can not use my iPhone. I am lost plse help. J

Hi All, I plugged my iPhone into my laptop and I was asked to upgrade my iTunes software. It took more than seven hours and just to be told that my SIM card does not appear to be supported. Since then I can not use my iPhone. I am lost plse help. Jam53
Every time I switch on the iPhone, the iTunes icon is displayed together with a USB icon and Emergency call message appears on the screen in many languages. When I touch the i symbol I get the following information IMEI: **** AND ICCID: ****
However, the iphone is visible in the Devices directory in iTunes. I changed my SIM card but still can not be recognized by the iPhone.
<Edited By Host>

Do you mean when you say its locked to another carrier other then the one im using, that maybe my insurance sent me an iphone thats for a different network for example orange and not mine which is o2?

Does Ethernet/IP Industrial Protocol support RSLogix5000?

Similar Messages

Maybe you are looking for