Does exist a tool to discover where the unknown data traffic come from?

I realized a lot of people experience Unknown data exchange without reason with all notification off with no localization with no push mail all accounts setted on manual and with no application running in background.There are people with a very big amount of unkown traffic but also people with a small amount of traffic like around 10kb every 5 minutes or maybe even less sometimes.Anyway is very strange i start to have this problem since i upgraded to 4.2.1 and i still have with no application installed without charging a back up just with the iphone as you take out from the box for the first time.
Just few kb are not a problem for me since i have a huge dataplan but is strange this exchange of data i found all the 4.2.1 of my friends have this problem instead all the old firmware doesn't have this problem.
I'm scared apple with this last firmware maybe is able to get private informations from iphone users.
I know exist an application called dataman but is not useful in my opinion for what we are looking for cause it tell you just the amount of data you used but not the details of the connections.Would be great if some one would be able to find the recent log to internet with the details...
I hope so!
Thank you for your collaboration!
Eddy

Is impossible to not leave confidential information in the iphone since you send and recive email with mail application or you have all your contacts or you would like if is possible acces to your bank account safely...
I have to tell you in my case for the unknow usage data apple is for sure the responsable cause i still have with a complete restore no backup and no apps installed a part the apple's preinstalled and not less important generate this traffic with different operators...
Just few kb but anyway is strange i realized most of the 4.2.1 had this problem...

Similar Messages

How to import the JSON data that comes from REST API into Excel 2013?

HI,
Is there a way to import the JSON data that REST API returns into Excel 2013? If so how?
Could you please let me know this?
If you need to know any more info please let me know.
Thanks,
Vinay

I got this. We need to use power query add in for this.
EXCEL 2013 -> POWER QUERY -> From Web
Enter the URL for the REST end point and click ok. Power Query editor will show up with the URL and list of your data.
click on the list -> Right click->drill down
You will see the no of records the API returned.
Right Click on List in that table -> To Table and say ok in the next dialog.
On the displayed columns, there will be a double sided arrow, click on that and select the rows you want to import.
There you go. You will all the data.
Click on Apply and close. This will import the data into your excel file.

Self Assigned IP Address, wher the heck did that come from?????

Getting flipping well annoyed with this 10.4 software release! Come on Apple say something find the fix. The problem started with 10.4.4 EVERYTHING was working fine prior to installing, Wifes imac on airport, me on my G5 chatting happily away, the reason I purchased the .mac accounts and the iSights. After 10.4.4 came the problem of the iMac getting an IP address of 10.0.1.x from the airport and no longer able to connect to the internet. So I powered off the airport and connected the ethernet from the Zoom ADSL router direct, and the iMac claims there is a "self assigned IP address" on the Ethernet, which is not true, the machine uses DHCP, rebooted so many times (Windows funnily enough never needed as many reboots as OSX Tiger! and now seems like a better choice if truth be told) and everytime this self assigned IP address appears. Now if I connect my PB to the same cable I get 10.0.0.x and no problem with the internet connection. Settings are IDENTICAL, I even cloned my PB and booted the iMac from the clone and STILL we get "Self Assigned IP Address" on the iMac!
Does anyone have any idea how to stop the self assigned ip address problem?
Jed "Really not very happy at all" Stone

Powered off the Zoom DSL modem for an hour or so, and
now it all works fine, got this Gem of info from ther
Macosxhints website, a mighty fine site it is as
well. Regards Kev
Does not solve the problem for me. I'm sitting in a motel with a wireless net. I can connect to the Red Carpet network, with a strong signal, but Safari says I'm not connected to the internet. Network status gives me the same dumb "self-assigned" error. TCP/IP is set for DHCP. Since it's not my base station, I can't just go and recycle it. It did work once, but I haven't been able to reconnect. I've tweaked the connection multiple ways, rebooted multiple times, etc. etc. etc.
So what gives, and what can I do.
Powerbook G4, Mac OS X 10.4.6
Machine Name: PowerBook G4 12"
Machine Model: PowerBook6,8
CPU Type: PowerPC G4 (1.2)
Number Of CPUs: 1
CPU Speed: 1.5 GHz

TPwrMain.exe where the heck did this come from

Suddenly on strt up, I started getting a TPwrMain.exe failed to initialize. First off, I've never used this ever, I use windows power saver, the other thing iswhen I plug anything into the USB port, it doesnt recognize it, as far as a flag in the task bar. I can go to computer and see it there. I can access it as long as its not my camera. I will admit, I plugged in a flash drive which had a U3 Cruzer on it. after this everything went crazy. I tried a restore from a week before and things got worse, I've scanned with avira, and malware bytes, to no avail. I'd like to get this tpwermain of the computer anyway, but cant find it to remove it, and contacting toshiba support is a lesson in futility. BTW its a L355-A7915 with Vista.
Please help and remember I'm not an IT expert
Keith

Satellite L355-S7915
It's a component of the Toshiba power application, Keith. Try uninstalling and reinstalling this package.
Toshiba Value Added Package for Windows Vista (32bit)'
You can always shut off the message by uncheking the item on the Startup tab of the System Configuration utility (msconfig.exe).
-Jerry

Where did these .dat files come from?

A couple days ago, while in Ghana, I was suddenly unable to send Microsoft file attachments; the files show up at my recipients as .dat files. How can I fix this?

I will try to put keywords so people find this thread.
Thanks to liaoyunhe we found "fast" the origin of our problem.
The problem is itself related to the usage of Microsoft's JDBC driver for SQL 2000 service pack 3 (�why to use M$-$QL on java?).
We currently use the same code with Postgres and also with JTDS drivers and there is no such problem.
What liaoyunhe says is absolutely true: you have to close ALL resultsets and ALL statements so there is no problem with the srt scb files.
We were stressing the application and after a while we got an "Too many files open" exception and we were able to count 39.000 srt+scb files with lsof.
After carefully reviewing our code, we found that we were not closing one resultset on a connection we re-use and the tmps were created and not released.
Thanks again liaoyunhe.
Thanks Micro$oft for giving us some extra work :-)

Does anyone know where the iWeb data files are located or what they are called? I can't find them. I looked in Finder for files named the same as my website, but found nothing. Any help would be appreciated.

Does anyone know where the iWeb data files are located or what they are called? I can't find them. I looked in Finder for files named the same as my website, but found nothing. Any help would be appreciated.

If you erased or replaced your hard drive since iWeb was cancelled, then they are gone. Otherwise, if you have maintained backups then check those.
Usually such files are in the /Home/Library/ folder or a sub-folder.
Exposing the /Home/Library/ Folder
Pick one of the following methods:
A. This method will make the folder visible permanently. Open the Terminal application in your Utilities folder and paste the following at the command prompt:
chflags nohidden ~/Library
Press RETURN.
B. Click on the Desktop, press the OPTION (⌥) button, select Library from the Finder's Go menu.
C. Select Go To Folder from the Finder's Go menu. Paste the following in the path field:
~/Library
Press the Go button.

How does Labview stores the binary data - The header, where the actual data starts etc.

I have problem in reading the binary file which is written by labview. I wish to access the data (which is stored in binary format) in Matlab. I am not able to understand - how the data will be streamed in to binary file (the binary file format) when we save the data in to a binary format through Labview program. I am saving my data in binary format and I was not able to access the same data in Matlab.
I found a couple of articles which discusses about converting Labview to Matlab but What I really wanna know is - How can I access the binary file in Matlab which is actually written in Labview?
Once I know the format Labview uses to store its binary files, It may be easy for me to read the file in Matlab. I know that Labview stores the binary files in Big Endian format which is
Base Address+0 Byte3
Base Address+1 Byte2
Base Address+2 Byte1
Base Address+3 Byte0
But I am really confused about the headers, where the actual data start. Hence I request someone to provide me data about - How Labview stores the Binary Data. Where does the original data start. Below attached is the VI that I am using for writing in to a binary file.
Attachments:
Acquire_Binary_LMV.vi ‏242 KB

Hi Everybody!
I have attached a VI (Write MAT file.vi - written in LabVIEW 7.1) that takes a waveform and directly converts it to a 2D array where the first column is the timestamps and the second column is the data points. You can then pass this 2D array of scalars directly to the Save Mat.vi. You can then read the .MAT file that is created directly from Matlab.
For more information on this, you can reference the following document:
Can I Import Data from MATLAB to LabVIEW or Vice Versa?
http://digital.ni.com/public.nsf/websearch/2F8ED0F588E06BE1862565A90066E9BA?OpenDocument
However, I would definitely recommend using the Matlab Script node (All Functions->Analyze->Mathematics->Formula->Matlab Script). In order to use the Matlab Script node, you must have Matlab installed on the same computer. Using the MatlabScript node, you can take data generated or acquired in LabVIEW and save it directly to a .mat (Matlab binary) file using the 'save' command (just like in Matlab). You can see this in example VI entitled MathScriptNode.vi - written in LabVIEW 7.1.
I hope this helps!
Travis H.
LabVIEW R&D
National Instruments
Attachments:
Write MAT file.zip ‏189 KB

Is there any tool to check whether the proper data is inserting or not?

Hi,
We have different products A,B and C.
whenever user crates an account under these products some X,Y,Z table gets updated.
If user1 creates an account under A then X, Y, Z tables update with some data along with some ID
If user2 creates an account under A then X, Y, Z tables update with SAME DATA along with some other ID
Is there any tool to check whether the proper data is inserting (same data is inserting every time) or not?
p.s : if this thread is not related to this forum .. where can I post?
Thanks,
Praveen

Is there any tool to check whether the proper data is inserting (same data is inserting every time) or not?You need to check the code to see that. Is the update or insert on the table has from different places? In that case it would be better to have them moved to a centralized place may be a package.
If you want to restrict the columns to specific values then you can use constraints.

Table where the Delivery date is stored in Confirmation tab on Me23n

Hello ABAB Gurus,
Can anyone give me the table name where the Delivery date is stored in Confirmation tab in Item in ME23n.
If anyone is aware of it then please let me know .
Sagar

Hi,
Check the table EKES and field name is EINDT..
Thanks,
Naren

I just purchased a camera packaged with Adobe photoshop Elements 11. I have a mac book air- which does not have a cd drive. The package did not come with a code or anything that would provide me with another way to install photoshop that came with my came

I just purchased a camera packaged with Adobe photoshop Elements 11. I have a mac book air- which does not have a cd drive. The package did not come with a code or anything that would provide me with another way to install photoshop that came with my camera. Is there any other way i can install this on my camera without using the provided cd or buying the software again?

That doesn't help the user with the serial code though.
There has to be some kind of code somewhere within the package. The disk itself does not contain one. You can look here for help with finding your serial number:
Find your serial number quickly

Where did this backup window come from on my desktop. I have always used time machine to backup to an external disc and within the last 2 weeks, this backup window keeps appearing. Where did it come from? Thanks for any help

where did this backup window come from on my desktop. It specifies personal data & settings and tells me when the next backup is scheduled [which I never set up]. I have always used time machine to backup to an external disc and within the last 2 weeks, this backup window keeps appearing. Where did it come from? Thanks for any help

To check your S.M.A.R.T status open disk utility and click on your drive and then click on the info icon.

I cannot close or import or any function to iphoto. I have been getting the same message for many days "Photos are being imported to the photo library. Please wait for import to complete." I do not know where the photos would be importing from.

I cannot close or import or any function to iphoto. I have been getting the same message for many days "Photos are being imported to the photo library. Please wait for import to complete." I do not know where the photos would be importing from. How do I get it to proceed?

After Force Quitting, as LarryHN recommended,
Select the iPhoto Library in the Finder. By default it is in your Pictures folder.
Ctrl-click or right-click the iPhoto lIbrary. Select "Show package contents" from the panel, that will pop up.
Look for a folder named "Importing" or "Import". Remove this folder, but don't touch anything else.
Then launch iPhoto again.
If iPhoto now is working again, check the folder you removed, if there are any photos that you want to keep and save them.

I got my Apple TV from US but i live in India where the electric voltage is different from US we have 220 votle so can i use it in India without any voltage converter

I got my Apple TV from US but I live in India where the electric voltage is different from US we have 220 voltes here in India so can I use it in India without any Votage converter thing?

According to the technical specifications of the apple tv it "has a universal power supply". I live in korea, but am a US citizen and my place has all US standard power so I can't really comment. However below is a link for your reference.
http://support.apple.com/kb/SP598

Where did this overage charge come from?

Looked at my upcoming bill and noticed there's a data overage charge of $15 on it when I wasn't close to going over my limit... I went to my bill on the VZW website and it shows a 3.18MB "Megabytes" usage.
The only time I update/download apps is when I'm at home and connected to my WiFi and I monitor my data usage very closely when I am not home so I'm not sure where this extra data is coming from.
Is anyone able to tell me where this is coming from? I'd like to avoid phantom charges.

it is not uncommon for usage that hit another companies tower to be billed on the next month billing or even the month after but in most cases it will (or should) also list the dates the services were accessed from the tower.. so for an example.. in December I was traveling in Canada from the States.. I most likely would not see direct charges on my billing ..example roaming and data charges... until the Canada cell tower operators bills my carrier.. hence Verizon for the usage there.. the main delay in due to the usage NOT being that companies customer and they have to trace the service back to the correct carrier...
Message edited as required by the Verizon Wireless Terms of Service
Message was edited by: Admin Moderator

[svn:fx-trunk] 9171: Adding the change notes that come from the TLF folks

Revision: 9171
Author:   [email protected]
Date:     2009-08-07 08:57:35 -0700 (Fri, 07 Aug 2009)
Log Message:
Adding the change notes that come from the TLF folks
bug: nope
qa: nope
checkintests: no need
Added Paths:
    flex/sdk/trunk/frameworks/projects/textLayout/ReleaseNotes.txt

Does exist a tool to discover where the unknown data traffic come from?

Similar Messages

Maybe you are looking for