Does exist the MSI GF4 TI4200 VTP8X?

Hello, I live in Spain and I go to adquire a MSI graphics card. I'll buy a GF4 TI4200 VTP 8X, but I think that model doesn't exist because in the oficcial page not appear, only appears the TD 8X and the VTD 8X models. But in http://www.alternate.net that model exist! What happen? Exist or not exist?
Thank you very much !!!
P.D. Sorry for my English, it isn't very well

I had the same problem with my MSI  G4 Ti4200-VTD8X.
I did the same manual loading of the capture program. Didn't work. Look in control panel under your hardware and see if there is a yellow "!" next to the part that mentions "capture."  Every time that was there the in didn't work.
I would uninstall and try it again.  
Sometimes it would work for the day.  I would even shut the computer off and when I would turn it back on, it would still work.  Shut it off for the night and the next day it wouldn't work again! Go figure!!! Do a restore to the point where I shut the computer off for the night, and it still wouldn't work.
I believe it worked for good when I loaded the 4072 drivers.  I did not install the manual program (I think - I did so  many un/installs I can't be sure).  Now the funny thing, those other little installs are not in my harware.  But it works.  I can't explain this.
Basically, uninstall the whole card driver , not just the capture.  Reinstall the card driver without that other manual capture program.  Just keep trying installing and uninstalling and checking out WinProducer to see if the capture option is there.  If it still doesn't, try the manual capture program.  Just keep trying different combinations.
Sorry that this isn't more of a step by step, but it worked for me.  Hopefully MSI will put out another driver soon that will fix this once and for all.
Tom

Similar Messages

  • MSI GF4 Ti4200 VTD8X tech question

    Hi everyone, I hope u can help me with this:
    I'm planning on buying a MSI GF4 Ti4200 VTD8X (Video In) from the United States which uses the NTSC system for Video, however where I live we use the PAL system for Video. So my question is will I be able to use the Video In feature of the card ?( ?? Do these cards work using both video systems or are there different video versions of the card?
    Thanks in advance!

    bondock,
    It is my understanding that they will work with both systems. They do not make them market specific.
    Take Care,
    Richard

  • Msi gf4 ti4200 td64

    For starter, sorry about my bad English !
    Sys Specs:
    Amd Athlon 900 (o/c 945)
    320 MB ram
    MSI K7T Turbo 2
    MSI gf4 ti4200 td64 64mb
    Last week I bought my video card. I didn't have problems until few days ago. Mouse movement in Win XP is choppy, not all the time. I played with sample rate but that didn't help.I tried my old gf2 mx400, and i didn"t have problems. I was reading threads and I realized that the problem may be in power supply. It's a bit old (about 2 years :-) ), iam not sure is it good if it is warm . This problem occurd just after the problem with HD (detection problems, messed HD name..), i checked IDE cable, it's good. 3d expirience is not shownig voltages and temepatures. Fuzzy logic 3 somtimes alerts that the temperature in chassis is 131C!! which is impossible. I sens lack of fps in games.
    Please help!  

    Leadman Electronics Model LP-6100
              +3.3V  +5V   +12V        -5V
      235W  10A    20A   10A          0.1A
    *250W  10A    25A   10A          0.1A
     300W  10A    30A   12A          0.1A
     400W  10A    40A   16A          0.1A

  • 640x480 and above, capture with MSI GF4 Ti4200 VTP

    could anyone successfully perform this operation ?
    The weird thing is that if I set a capture of something like 5 fps in VirtualDub and 640x480 (I tried with several codecs and thought that decreasing the fps would improve the bandwidth usage), it still doesn't want to capture anything -> 0 frames. The maximum I can get (15% frames lost) is 320x200 at 30 fps.  I tried to capture directly to memory as it's supposed to be very fast, no luck.
    Maybe my system is not monster enough, don't know....   ?(   Or could that be the card which is limited for this ?
    MSI GF4 Ti4200 VTP - 1 gig RAM (DDR 333), Athlon XP 2100, IBM ICL35 120 GB - OS : W2K.
    WDM 1.16 from MSI-CD. I tried with WDM 1.08 too.

    your system is fine for this kind of job....
    i have no problem in capturing full pal (768x...) in 30 fps (using included wincoder and mpeg1 or mpeg2 codecs) 60% cpu load on duron @1380
    virtual bud will need somethong better then 1,3gh duron but i got no problems with 640x480 divx pro 5.02 25fps on my current sysetm (but the cpu load is high 75-90%) (0% frame lost)
    some motion codecs (mjpg) will need both fast cpu and fast hdd....
    uncompresed will produce so much data that even very fast hdd's will by to slow
    but it is in fact weird 15% frame lost on 320x200 is much to high.. what board are u using?? are the latest 4in1 drivers instaled (very important for w2k) by shure that agpx4 and bus mastering are on... are u using any other extensin cards (tv tuner, off board sound, ide, lan??) if yes try removing them

  • What kind of TV-Out is on the 64MB Version of the MSI Geforce4-Ti4200?

    It´s very important for me:
    What kind of TV-Out is on the 64MB MSI Geforce4-Ti4200? And what kind is on the 128MB Version? (The same?)
    Thanks
    Bloody Judge

    The hub is not compatible. It sounds like the unit is powering the link to the TC.. which would cause the TC to freeze up. You might need a special USB cable which has just data connection but no power.
    It is really hard to get info on hubs that work.. particularly because there are so many around and many are changed .. eg if you buy a belkin this year it fails when last years one worked.. that is because all the manufacturer is farmed out to various factories in China who use .. the cheapest parts available today to build them.. next week it could be different.
    The TC just doesn't have a huge amount of memory to store drivers for every USB under the sun. So some work some don't. The best I have found is the cheapest brand x USB2. I would not bother with USB3 since that chipset is even more unlikely to be supported than USB2 ones.
    I have tried to get people to add to a database.. not much so far.
    https://discussions.apple.com/thread/5912861?tstart=0
    Appreciate anyone who takes the time to add their experience.

  • MSI GF4 Ti4200

    Thanks for earlier replies (August);  No joy.  I have the latest MSI VGA drivers/VGA BIOS for this card eg.  VGA driver: V4.13.01.3000, VGA BIOS: V4.25.00.29.00.  My ASUS motherboard BIOS is set to AGP 4x, and VGA set to AGP (not PCI).  On the MSI Information screen, I can't change from AGP 1X to AGP 4X.  (or change any other options on that screen either).  I have sent feedback emails to MSI - no response - am I being optimistic?  Any help would be gratefully appreciated.
    I'm running a PIII/866, memory 256Mb/133.
    Howard

    I had the same problem it's your VIA/Motherboard drivers but i have got MSI ultra ARU Motherboard which is VIA don't know about ASUS Motherboard.
    I used the 4in1442v VIA drivers
    Update them and you will have 4x ticked and you will have AGP traffic enable ticked, as in the MSI manual.
    I also had a 2500 there about  increase in 3dmark2001se it should around 9500+

  • MSI GF4 Ti4200 Video-in/capture on secondary monitor.???

    Hi,
    I have an MSI Ti4200-VTD8X (dual head, Video I/O).  I am running it in dual monitor setup.  When i try to view the video input on the secondary monitor i get the message:
     "due to limitations of your computer's display device, this video can only play back on one of your monitors. please move the video window completely onto that monitor"
    Does anyone know if this is a driver problem? or really it is a limitation with the card?. though i do not know why would the card be able to view the video capture window on one monitor but not the other?.
    Thank you for any help you can provide.
    L.
    P.S.: system:
          MSI T14200-VTD8X  128m
          ASUS A7v8x Mobo
          512M RAM
          Win XP

    Yes, I am using NVidia's nView as well as their WDM drivers.  my dual monitor support seems to work fine.
    Only if i want to see video input feed using something like win_DVR  or Win_VCR or even Win_Producer that i get this message if the software/input winodow was on the secondary monitor.
    Any help would be appriciated :D
    L25

  • Does exists the connector flow in BPM 11g?

    Hi All.
    I not found the connector flow in bpm 11g (JDeveloper).
    Does it exists?
    When we have the big business process with many roles and activities, how to do?
    Regards,
    Diovani
    Edited by: Diovani on 17/02/2011 18:14

    Hi.
    It doesn´t exist in BPM 11g (until the PS4).
    Regards,
    Diovani

  • MSI Gf4 Ti4200 TD64 - Compatablity?

    I have the above board and I am looking to upgrade to an Asus Nforce2 board. It says that the AGP port is 1.5v only.
    Will my agp 4 card Ti4200 work with this.

    fullforcefitness,
    All current cards are 1.5V.
    Take Care,
    Richard

  • Bios update for MSI GF4 Ti4200-TD64 out now!

    Hi.Well on Liveupdate there is out MS 8870 BIOS,and there is 3 BIOS:
    Ver100
    Ver110
    Ver120
    Here is the link:http://tw.msi.com.tw/autobios/SVga/Bios/Ms8870/
    Anyone knows whats been fixed in this BIOS versions?

    Hi there,
    I got this message from MSI:
    Quote
    We may release different version of BIOS for the same
    model but different options.
    For example above,
    MS-8870 BIOS version 1.00 is for MS-8870 64MB
    MS-8870 BIOS version 1.10 is for MS-8870 128MB
    MS-8870 BIOS verison 1.20 is for MS-8870 64MB (a
    different memory type)
    A wrong version may case the system never boot
    again!!!
    Be very carefull what you download!

  • GF4 Ti4200 and Win98 - HELP ! serious problem with drivers !

    Ok, I could successfully install the MSI GF4 Ti4200 128 in Windows 2000, no problem there, everything is working.
    I then installed Win98 as a second OS, I launch the drivers setup (from MSI CD) and I reboot as wanted by the setup. The PC reboots, the Win98 screen appears and suddenly...it reboots by itself, no message, no black screen.  I tried with other driver versions from NVidia and this time, I get a freezed black screen after the Win98 screen, I must press reset.  I had to enter the safe-mode to remove the drivers and get the usual 640x480 in 16 colors.
    What's going on ? I tried to change my bios parameters, disable the virus detection option, everything that could make problems ... but no success. I also tried a second Win98 installation, with DX 8.1 installed before the drivers but still the same problem.
    My system is AMD XP 2100 with Asus A7V333 motherboard - 300W for power, is the problem caused by some VIA chips ? I tried with their 4-1 drivers and stuff on the CD but it really doesn't want to work.
    Please help...

    after searching a bit on the forum, I found a thread where someone pointed out a problem caused by memory, greets to him.  I have 1 gb of ram and I added these lines to my system.ini :
    [vcache]
    MinFileCache=65536
    MaxFileCache=131072
    ChunkSize=2048
    NameCache=4096
    DirectoryCache=96
    ConservativeSwapFileUsage=1
    Values may change with more/less memory...And now it works perfectly in Win98.

  • Overclocking MSI GF4 ti4200td 4xagp

    I was wondering if anyone knows what are reasonable overclocks for the msi gf4 ti4200 td 4x agp card. Today I adjusted the core to 300 and used the auto adjust feature for the memory and got it up to 567. Things are running stable but I was wondering if this is too high or if there are any limits I should not pass? Can it go higher? I only have the default heatsink and fan for the GPU and no heatsinks on the ram. Should I worry about temps?

    If you aren't getting artifacts on your screen then I think it should be fine. Run a few more games and watch for colorful pixels. If you get them then clock down a bit.
    Have Fun, don't blow your card
    Regards,
    Rob

  • GF4 Ti4200-VTD8X(8894) and Live update 2.0

    Hello all
    Recendly i bought this graphic card (i mention on the subject). It's much faster than the Asus GF2 Ti i had before and all are working properly except of the updating program called Live update 2.0. I installed it and when i got connected to the server it announced me that the version running on the server is newer than mine and it gave me the option to update it as i did. When i reconnected to the server and asked for updates about my card's bios or driver it gives me the message that my graphic card isn't from MSI. The utility option works fine but as you can understand isn't the important one. As i was ecpecting the same results i got from the live monitor too.
    So i would like to ask the moderators of this forum or anyone who could know:
    1) Is my graphic card [MSI GF4Ti 4200 VTD8X (8894) 128 MB] combatible with the Live update utility 2.0 or not? The 3D turbo experience utility works fine on my pc.
    2)If i update the VGA bios and driver of my graphic card manualy (without the live update utility) from the MSI web site will i still have the tabs "MSI information" and "MSI clock" on my display properties?
    Thanks in advance
    Morte  

    I recently built a system (specs below) and installed this card (MSI GF4 Ti4200 VTD8X MS8894, 128MB DDR), and when I try to use Live Update 2 (version 3.33.000, from the CD that came with the card), I get the same message:
    "Warning!!! Your Display Card does not support MSI Live Update 2 function.  Note: MSI Live Update 2 supports the Display Cards of MSI only."
    I'm using the drivers/BIOS that came on the CD: Driver version 6.13.10.4107, BIOS version 4.28.20.05.11.  I see on the nVidia site that they have the 4109 drivers out now, should I try those?  ?(
    I have also made sure to do the suggested modifications to IE (and I don't have PC-cillin installed):
    "Note: In order to operate this application properly, please note the following suggests.
    -Set the IE security setting 'Download signed ActiveX controls' to [Enable] or [Prompt]. (System default is [Prompt]).
    -Disable 'WebTrap' of PC-cillin(R) or any web based anti-virus application when executing MSITM Live Update 2TM.
    -Update Microsoft® Windows® Installer"
    I downloaded a newer version of LIveUpdate (3.35.000), and installed it (after completely uninstalling the old version), and got the same results.  Nothing on my system is currently overclocked.
    Help!
    System specs:
    -Soyo SY-KT400 DRAGON Ultra (Platinum Edition) with latest BIOS & Chipset Drivers
    -AMD Athlon XP Thoroughbred 2100+
    -MSI GF4 Ti4200 VTD8X (MS-8894)
    -WD Caviar Special Edition 80 GB HDD, 8 MB Cache
    -512 MB Crucial PC2700 DDR (one stick, in DIMM #1)
    -TDK 40/12/48 CD R/RW
    -Daewoo 905DF Dynaflat 19" Monitor
    -Windows XP Home Edition, SP1/all other updates current
    -On-Board CMedia 6-channel audio
    -On-Board VIA 10/100 Ethernet
    -Altec-Lansing ATP3 Speakers

  • Problem w/GF4 Ti4200 vtd-8x

    I had problems with my new MSI GF4 Ti4200 vtd-8x 128mb running on a 648 Max mobo. The mobo supports agp 8x but both riva tuner and display properties showed it running on agp 4x. I would really appreciate any help I can get.

    Try updating both mobo and VGA card drivers.
    Do clean un-installation before installing new VGA driver...
    All the Best...  :D !!!

Maybe you are looking for