Does Extreme router support 3G dongles, since it has a USB port?

I have an Airtel 3G dongle and was wondering if I could use the USB port on the Apple Extreme router to make it work as a router that can broadcast 3G signals.

A dedicated mobile broadband router, as suggested by edex67, is a good idea. There are models from several manufacturers. Before you buy, ensure that the exact USB mobile broadband modem and the network operator are supported. Just as an example, the web page belows claims support for some Airtel modems:
http://www.ekwireless.in/modems.html
Jan

Similar Messages

  • Does anyone know if the new ipad air has a usb port. This is the only downside to the ipad to me? My samsung galaxy tab has 2. 1 being a micro usb. Great for connecting to the tv.     Thanks, greenlady5.

    Does anyone know if the new ipad sir, not yet available will have a usb port? This is the only thing that is prevented me from purchasing so far. Doesn't make sense when you can connect to tv.
                                                                       ggreenlady5.

    The standard external connection and charge port on all recently-announced (October 2014) models in the US is the Lightning connector, introduced with the iPad 4 in Sept 2012. http://techcrunch.com/2012/09/12/apples-new-lightning-connector-what-it-does-and -doesnt-change/
    This includes iPad Air, iPad Air 2, iPad mini, iPad mini 2 with Retina display and iPad mini 3.
    https://www.apple.com/ipad/compare/
    NOTE: The original iPad (2010), iPad 2 (2011), iPad 3 (early 2012) came with a 30-pin connector, also common to original iPhones and iPods.
    Additional adapters are available to connect TV's, cameras, SD memory cards, and similar devices, from many sources, including the Apple Store online. (Adapters are still available for the older iDevices using the 30-pin connector as well)
    http://store.apple.com/us/ipad/ipad-accessories/cables-docks
    Some common Lightning adapters available from Apple online:
    Lightning to USB camera connector with a 'standard' USB cable.
    http://store.apple.com/us/product/MD821ZM/A/lightning-to-usb-camera-adapter
    Lightning to HDMI adapter (requires an HDMI cable as well as this adapter)
    http://store.apple.com/us/product/MD826ZM/A/lightning-digital-av-adapter
    Lightning to micro-USB connector
    http://store.apple.com/us/product/MD820ZM/A/lightning-to-micro-usb-adapter

  • Does a Router support 2 BGP As in one router

    Does a Router support 2 BGP As in one router. I have gone through the below Cisco page, however my router is not allowing to enter the second AS in the router, it is giving the error as usual " BGP is already running; AS is XX" . 
    http://www.cisco.com/c/en/us/td/docs/ios/12_2s/feature/guide/fsbgpdas.html#wp1056689
    My Router :- Cisco 3845
    IOS Version :- c3845-advipservicesk9-mz.124-24.T8.bin

    Hi,
    You can not run multiple BGP processes on a single router with each of them being in a separate AS. What you can do, and the link in your post explains that, is that towards a particular eBGP neighbor, you can use the neighbor local-as command to appear to be in a different AS than the one you really are in. So you do not start two BGP processes, you just make your single BGP process to appear to use a different ASN on a particular eBGP peering.
    Best regards,
    Peter

  • How do you connect a usb printer and usb external hard drive to the airport extreme, as it only has one usb port?

    I'm thinking about upgrading my old 802.11g router for a new airport extreme. Can it connect to a usb printer and external hard drive at the same time and acutally work. It only has one usb port on the back.
    thank you!

    To add multiple USB printers and/or HDDs, you just first need to connect a USB hub (powered prefereably) to the AirPort's USB port, and then, add the USB devices to the hub.

  • HT1529 MY DONGLE IS NOT DETECTING IN USB PORT

    Sir,
    1. My dongle is not detecting in USB port; what to do?
    2. How I can go to My Computer (like Windows) so that I can see filing system memory status?
    3. For extending warranty what is the process?
    Regards,
    Subrata Dey

    Assuming yu have a PC try:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
    iPod not recognized in 'My Computer' and in iTunes for Windows
    iPod: Does not appear in Windows or iTunes and Device Manager is empty

  • Does 1841 router support IPsec vpn?

    Hi,
    how can i check if my router supports IPsec VPN?
    Cisco 1841 Software (C18410IPBASEK9-M), 12.4(11)T
    regards
    kimhoe

    Hi,
    Yes, it does support IPSEC VPN. You can check it from software adviser tool at Cisco site,
    http://www.cisco.com/en/US/partner/support/tsd_most_requested_tools.html
    Regards,
    ~JG
    Please rate helpful posts

  • Since windows 8.1 usb ports and sound are acting strange

    Hello,
    Since I upgraded to windows 8.1 my sound randomly stutters(very anoying) and my usb ports get turned off, only the ports that have been occupied since boot, new things work, and not reinsterting the things that were present at boot, in the same or a different
    port doesn't work.
    Hell, why do we pay for an OS that doesn't even work?
    I expect that something as simple as an USB port or sound would work just fine.
    I have installed all the latest drivers but somehow windows seems to screw things up.
    When I boot up debian, I have no problems at ALL. And did I pay a dime for Debian? No, it is free.
    I am getting really depressed here, paying for stuff that doesn't work.
    So does anyone know any other way to fix this OS than by breaking the disc and never return to it?
    Thanks in advance.

    To whom are you telling that, this is an end user forum.
    If you have problems than contact Microsoft in your country.
    http://www.microsoft.com/worldwide/
    Success
    Cor

  • Does cisco router support "tcp reset" mesg when the traffic blocked by access lit ?

    hi ,
    im trying to know if i  blocked a destination with an access list on cisco.
    can i make "tcp-rest " to that connection instead on dropping it ??
    i belive it supported on ASA appliance , but not sure if supported on cisco routers.
    im trying to migrate from linux router to cisco router and apply the same config , one of the challenging task is , i have 
    "reject-with=tcp-reset"
    im wondering if i can do it on cisco router
    waiting ur responce
    regards

    One of the things that keeps me engaged with these forums is that they challenge me and give me opportunities to learn new things. My initial reaction to your question about IPS on IOS router was to say that this is not supported. But I did some research and find that apparently IPS functionality is now supported on some (but not all) of Cisco IOS routers. See this link for additional detail:
    http://www.cisco.com/c/en/us/products/collateral/security/ios-intrusion-prevention-system-ips/product_data_sheet0900aecd803137cf.html
    HTH
    Rick

  • Does these router support VPN

    Hi,
    I would like to setup VPN between our HQ and users thru internet. The router in the HQ is 827 4v (12.2(3)). Is it possible to setup a VPN on this router?
    What should i need the minimum requirement of router specs to achieve the above mentioned goal? My intention is to run a citrix published application from anywhere.
    Thanks for your advises

    Hi,
    Below is the link that explains the set up.
    http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a00800949db.shtml
    I hope it helps.
    Regards,
    Arul

  • Does OSX Mountain Lion recognize an external monitor through a USB Port?

    I am thinking of buying an external monitor soon and I dont know if my Mac Mini 2011 will recognize the external monitor through a USB port. Is their a software that I would have to download? It will be going throught the port with this http://www.walmart.com/ip/SIIG-USB-2.0-to-VGA/10884548 or even this http://www.directron.com/k33928us.html?gsear=1. Thanks

    That is to complicated, requires special drivers and most likely will produce a poor quality siginal to the monitor.
    For 24" or smaller monitors your best bet it to buy a monitor with HDMI and/or DVI input and use a good HDMI cable between the Mac Mini and Monitor, or optionally the supplied HDMI to DVI Adapter and a DVI-D cable.
    For larger Monitors you will want one with a DVI or Display Port input and use a Mini DisplayPort to DVI Adapter and a DVI-D cable or a Mini DisplayPort to Display Port cable.

  • Why does N97 charge from some USB port and some no...

    OK some seem to have same sort of troubles but I couldn't find an answer to this one...
    So I have a N97 that charges OK when I plug it in computers USB port or in a (powered) hub.
    But I also have a USB power adapter that I can plug in a wall socket and it has one USB port (5V/1A) and nothing happens.
    Same happens when I plug it in my car using a USB adapter (not a actual car charger for N97).
    Since every other phone/MP3-player/device that can be charged via USB works with these, I have to asume that this is something with my phone...
    Has anyone else faced this and have found any solutions?

    OK I have some additional info to this one.
    I made some experiments with different chargers and cabels and here is the most interesting result (in my oppinion)...
    In both cases I used my N97 and the USB power adapter (with 5V/1000mA output).
    Only difference was how I connected the two...
    By using the data cabel (Nokia CA-101) that came with the phone and nothing it DOES NOT charge the phone.
     (and yes it is working cable, since I use it to sync my phone with my PC and it does charge the phone via PCs USB).
    By using USB->2mm plug adapter (Nokia CA-100) and the 2mm plug->micro-USB adapter (CA-146C) it DOES charge the phone.
    Since CA-100 converts USB to more simple connector then there must be something more happening inside CA-146C than just relaying those wires forward...
    Any ideas???
    Attachments:
    charges.jpg ‏289 KB
    no_charge.jpg ‏404 KB

  • In the garage I have a Netgear Router. it is connected by a ethernet cable, I have a 1tb drive that I want to use there. On the drive there is only a USB port. on the Netgear there is only ethernet ports. is there an adapter that will work for that?

    In the garage I have a Netgear Router. it is connected by a ethernet cable, I have a 1tb drive that I want to use there. On the drive there is only a USB port. on the Netgear there is only ethernet ports. is there an adapter that will work for that?

    It's not that simple. You need a "smart" device to connect a hard drive to, like a Time Capsule, or another computer, or an Airport Extreme/Express that was made to share a drive, or some other brand router that has a USB port for sharing a drive, etc.

  • How to view usb port share on a netgear router wndr3700?

    How to view usb port share on a netgear router wndr3700?

    @billboddy ,
    Hello and welcome to the HP support forums.  Unfortunately to change your USB ports requires a change in motherboard.  To have that done would require a repair.  
    Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
    Thank you again for posting and have a great day.
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    D5GR
    I work on behalf of HP

  • How do i configure the usb port on a draytek vigor 2820n router for use with my imac

    i have an imac connected to the internet through a draytek vigor 2820n router. this router has a USB port with a HP Deskjet 5560 printer attached (for use as a network printer for other machines on the network). How do I configure this printer on the iMAC?

    I checked on the HP web site. Your aswer is on the HP website under your printer type. Update your drivers and follow the instructions given by HP and the printer will work as you have it connected.
    Good Luck

  • My usb port does not work

    I keep getting a message that my usb ports are disabled because the device plugged in is taking too much power.  I plugged in a passport 1 tetra hard drive.

    What kind of computer are you using? Are you plugging in to an external keyboard or other device or directly into the computer? Does it work if you plug it into a different USB port, preferrably one on the computer?
    Best of luck.

Maybe you are looking for