Does FF 3.6 have to be removed to run the FF 4 beta?

can FF 3.6 and the beta co-exist on the same PC? thanks

By default the Firefox 4 beta is installed in a different location than Firefox 3.6. The 2 versions can happily co-exist, but if you plan on using both versions you should set up a new profile for Firefox 4. Firefox stores user data such as bookmarks and passwords in the profile folder, if you use the same profile folder for different versions of Firefox it can cause problems. For details on creating a new profile folder and using 2 versions of Firefox see these links:
* http://kb.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows
* http://kb.mozillazine.org/Shortcut_to_a_specific_profile
* http://kb.mozillazine.org/Testing_pre-release_versions

Similar Messages

Does anyone out there have LabVIEW drivers for either a Z-Mike 1102 (Beta Lasermike) or a Compumotor 6104 (Parker)?

Does anyone out there have LabVIEW drivers for either a Z-Mike 1102 (Beta Lasermike) or a Compumotor 6104 (Parker)?

CompuMotor creates a Motion Toolbox for LabVIEW, but it is not supported by National Instruments.
You can find some support files and downloads for the 6104 from http://www.compumotor.com/support_samples.htm

Why does my I pad have a snowy line going across the middle?

Why does my I pad have a snowy line going across the middle?

I do not really know but try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release].

I have a problem when I run the DTP

hello
the day before , I load data in a PSA "MASTER DATA" mode full,
then in the morning I load data again this "MASTER DATA."
I can see that the same lines do not not present a problem but the lines were changed, i have a problem when I run the DTP?
I get this messages errors:
.« the time interval & (from/to) for the data
ecords 1 & and 2 & overlaps in characteristic 0COSTCENTER &.u201D
u201CMessages for data records saved; request is red acc. to configurationu201D
best regard
francoise dinatale

As this is a master data load, the attribute change run is mandatory before performing the next load.
The probable reason for this is in the master data table there is an entry for a characterisitic value and the load resulted in another value. The difference between these two records is the object version. Exisitng record will have A version and the changed record has M version.
So when we active master data(attribute change run ) then M version overwrites A version and hence on a net we have only one record in master data table.
Post the above task if we again load master data, as is in your case, then the record will find its place in M version.
As the activation is not performed(probably), the system finds it difficult, with previously loaded M version and currently loaded M version and hence the reason for the message.
Naveen.A

Does TestStand 2.0 have a user manager accessible through the base deployment engine?

I only see API calls to show add and edit users for the base deployment engine, but not a full user administrator like in the Sequence editor. Is this only available with the TestStand development env?

Why do want to be able to edit users on every test station. You can make life simpler by putting your users.ini file in a network location and from Station Options>User Manager, point to that location. That way you only have to add users once and you can do that from the development system. Even if there's a reason to have different users for different stations, you could just copy the different users.ini files you create to the local TestStand directories on the test stations. I do that with the StationGlobals.ini file. I find it easier to have of my test stations use the same station globals. I define the unique ones as sequence file globals. When I do have to add a new station global, I take my local copy of StationGlobals.ini and just do a c
opy to all of the test stations. Personally, I much prefer the fact that users and station globals can't be edited by the operator interface. That's just one less thing I have to worry about the test operators getting in and changing something.

Does theAirPort Time Capsule have to be left on all the time

Do I have to leave the NEW UPRIGHT Time Capsule on and connected to the power all the time

There are two different schools of thought as far as the Time Capsule (and other Apple routers as well)
If Apple had wanted you to turn off the Time Capsule on a regular basis, they would have included an "Off" switch on the device, or a means to turn off the Time Capsule from your computer.
Clearly, Apple designed the Time Capsule is designed to be left on most of the time.
There is less stress placed on an electronic device when it is left on, as opposed to turning it off and on constantly.
Yet, it is true that turning the Time Capsule off will save a bit of energy.
Knowing that just about any decision involves trade offs, you will have to decide which school that you want to join.

I have compiler error when i run the ant script

Hi
Iam a beginner working with ant...When I run the script I get the following error...let me know if you have any suggestions....
build:
[javac] Compiling 28 source files to C:\finaltrial\classes
[javac] Note: Some input files use unchecked or unsafe operations.
[javac] Note: Recompile with -Xlint:unchecked for details.
[javac] Compiling 186 source files to C:\finaltrial\classes
[javac] error: error reading C:\finaltrial\classes\trial\impl\ru
ntime\AbstractUnmarshallingEventHandlerImpl.class; error in opening zip file
[javac] Note: Some input files use unchecked or unsafe operations.
[javac] Note: Recompile with -Xlint:unchecked for details.
[javac] 1 error
Thanks in advance..

that's not an error, it's a warning.
See the documentation on what causes that warning, it'll be an eye opener about the new language features introduced something like 2 years ago.

Why does Settings say I have 1.7GB of messages, when the. Messages app is clear of all conversations?

Very frustrating! I have restored, restarted, everything!

Since CS6 is the current release, upgrading to CS5 is a near impossibility, and EVERYONE will need to upgrade in lockstep or you'll be worse off than you are now with users of your newer version creating files that cannot be opened by users of CS4 (and your CS4 packages won't automatically install the fonts in the documents in the later versions without manually changing the names of the packaged fonts folders).
As far as font formats, if you are going to collaborate cross-platform, the font of choice is OpenType, which is 100% cross-platform compatible, and second choice is Windows TrueType which also can be installed on Mac OS X (so, essentially, also cross-platform). Last choice would be to use Windows Type1 which can be installed in the private InDesign Fonts folder in the Mac applications folder and will work in ID, but nowhere else. Any of these would allow everyone to use the same fonts, presuming you all purchase the same versions. Purchasing Windows versions and Mac versions of the same font usually works, but there may be little surprises, and you probbly don't want that.

Search here..why does my home page have music notes dancing around and the word (null)

hi

\o,
Just in case anyone else stumbles upon this issue and is wanting answers....
I raised the issue with an apple service rep.
This appears to be a bug. Current theory is that when the phone enters sleep mode (which can be anything from 5-15 minutes or even longer depending on apps that are open and other phone settings - mail, push settings etc) the music app is resetting, well not exactly, anyway it forgets its in shuffle mode if it was in shuffle prior to going to sleep. That is, when the phone goes to sleep the shuffle setting resets to shuffle 'off', as this is the default shuffle setting.
This will require patching in a future iOS update. Might be the next one, might not be. Its not really a major bug so it might not get prioritised for inclusion the next iOS update.
Apparently I was the first person to notice this.. very surprising. I'm sure others have had the same issue but maybe just not realised it was a reoccurring bug.
Wait and see what happens after the next iOS update.
Kind regards,
Mikeymus

I am a mac user and I can't load the update because it says I don't have permission to remove components of the current version?

I am the sole user of this mac and have an administrative account. Do I uninstall before I install the new version?

* Download a new copy of the Firefox program: http://www.mozilla.com/firefox/all.html
* Trash the current Firefox application to do a clean (re)install.
* Install the new version that you have downloaded.
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data.

HT5622 I have set up my ipad but cant remember the 4 digit code I put in . I cloud does not seem to have any record of me and the ipad mini keeps locking me out as i try different codes - help please

Help please I have just got my Ipad Mini and set it up but cant remember the code I put in. I cant access settings or anything else as it has locked me out. Ive treid Icloud but it doesnt recognise tht I have registered. Can anyone give me straightforward instructions on how to start again please

This is the guidance from Apple:
http://support.apple.com/kb/HT1212
Barry

I have tried download/installing and running the most current add-in for connect in my outlook.

Is there a special way to install this add in?

I downloaded it from the adobe.com website- under Resources- dowloads and updates- additional downloads-I then clicked on the Microsft Outlook [32 bit Windows] www.adobe.com/support/connect/downloads-updates.html#additional-downloads
I did have another add-in that had downloaded about a week prior to this one which did the same thing this one was doing except for the first one didn't make my whole desktop freeze up I would just get constant notificatioin boxes popping up telling me there was some error with adobe meeting of some sort. I just want to be able to schedule an adobe connect meeting via outlook instead of having it sent to me first and then having to turn around and have to download it to any other sites that may be having the same issues.I wish I would have taken pics of the error boxes but unfortuanly I didn't. I did exactly what the guide said to do for installation-

After downloading ios6 my battery life doesn't even last one day! Is this planned by apple so our phones will work so poorly we'll have to upgrade? am running the podcast app on 3gs. used to work great in music. how do I go back to the way it was?

After downloading the ios6, battery life doesn't even last a day on my 3gs Iphone. Used to download podcasts to music and now have to use the pos Podcast app.It doesn't download the podcasts half the time IOs 6 *****! Are you listening Apple? how do I at least make changes so my battery doesn't run out after 7 hrs.

Sorry this is a user to user technical forum. There is NO APPLE here as stated in the term of use when you signed up for this forum.
here are some battery tips
http://osxdaily.com/2013/09/19/ios-7-battery-life-fix/
http://www.apple.com/batteries/iphone.html

My MacBook Pro does not save bettery life.i use 4 hrs for the full charge better instead of 7 hrs.what is the problem.Please help.

My MacBook Pro does not save bettery.I use 100% bettery charge 3-4 hrs instead of 7 hrs.what could be the problem?

7 hours mentioned is possible when run under lab conditions.
Running GPU intensive applications will decrease battery runtime.
Maximize Runtime / Tips for maximizing your battery charge
http://support.apple.com/kb/HT1446
Runawy applications can shorten battery runtime,affect performances and
increase heat and fan activity.
http://support.apple.com/kb/TS1473

Cannot uninstall I tunes. In control panel add and remove programs it will not give me the option to remove any of the I tunes. In program files it tells me access denied to remove any of the related items. I have tried using the removal methods from i tu

My i tunes will not work at all. I have tried all the steps given to remove my I tunes player but in my control panel, add and remove programs it does not give me an option to remove any of the apple/ I tunes. I tried to go to program files and remove all the files but access is denied. This all started about 1 1/2 years ago and with every i tunes update i got more and more errors or problems until it stopped working. At one time i could remove and reinstall i tunes to try to fix it but now i cannot do anything. I believe one of the last was i could not open i tune because it was being used or was on another network, not 100% sure its been so long and frustrating I quit trying 6 months ago. Hopefully someones got some help !!!
Thanks I appreciate your time; Philip

See Troubleshooting issues with iTunes for Windows updates.
tt2

Does FF 3.6 have to be removed to run the FF 4 beta?

Similar Messages

Maybe you are looking for