Does final cut express 4.0 work in new macbook bought in Oct 2013

I bought Final Cut Express 4.0 in 2008 and recently I bought a new MacBook Pro 15" around Oct 2013 and updated to Mavericks 10.9. I copied all the contents and apps from the old macbook to the new one and when using the Final Cut Express, it asked me for the serial number and when I tried to add it, it says serial not valid. What can I do to be able to use my Final Cut Express? Please any suggetions?

Three thoughts,
1. It is usually better to re-install pro apps (like FCE) from scratch instead of migrating them from an older Mac. If you migrated FCE from your old Mac, this could be the reason for the hiccup with the serial number.
2. The serial number is very long, and it's very easy to mistype a character. Try entering it again, being very careful typing and check the serial nubmer visually before you hit the enter key.
3. Keep in mind that FCE was discontinued in June 2011, even before Lion was released. It is no longer supported and there is no guarantee it will run, or run properly, on later versions of OS X including Mavericks. Users have had spotty success with it on Lion, Mt. Lion & Mavericks. YMMV.
Final Cut Pro X is the currently released & suported video editing app from Apple. You can download, install & try it out free for 30 days.

Similar Messages

Does Final Cut Express 4 Read Clips From an External NAS Drive?

After upgrading from iMovie 08 to 09 I have found out through these pages that iMovie no longer supports reading clips from and writing them to my external wireless drive (via the Events library). The question for this forum - does Final Cut Express 4 have the same issue?
Just to anticipate a couple of points - I do not intend to use my external hard drive for 'in line' editing, it is merely a repository for excess clips that my hard drive cannot accommodate. I understand this kind of arrangement is slower than Firewire 800 but it is what I have and I want it to work.
Message was edited by: Plutonian

FCE has nothing to do with how you archive your media as long as it's not used for playback within the application. The only issue might be how the drive is formatted. For large media files it really needs to be formatted in Mac OS Extended.

Does the projects created in Final Cut Express transfer over to the new Final Cut Pro software?

Does the video projects created in Final Cut Express transfer over to the new Final Cut Pro software?

You want to go from FCE to FCP-X?
You would need to do so in multiple steps.
1) You would need to be working in a very late version of FCE.
2) Open the FCE project in FCP-7.
3) In FCP-7, export an XML of the sequence you wish to get to FCP-X.
4) Purchase the software 7toX
http://assistedediting.intelligentassistance.com/7toX/
5) Import the XML into 7toX, export the FCP-X friendly file
6) Import the converted XML into FCP-X
7) Re-link all you media
It should be noted that when you use XML, not all the things you have done in your original sequence will make it through the final translation. There is more information about this at the 7toX page linked above.
MtD

Does Final Cut Express support ProRes 1080p?

Does Final Cut Express support ProRes 1080p?

Hi(Bonjour)!
ProRes codecs was introduced with Final Cut Studio 2.
You can't create a ProRes sequence in FCE, but if you've installed the +Apple ProRes QuickTime Decoder 1.0 for Mac+ you will be able to import ProRes footage, but rendering or conversion will be needed.
http://support.apple.com/downloads/AppleProRes_QuickTime_Decoder_1_0_forMac
Michel Boissonneault

Does final cut express have the functionality like macromedia flash 8?

does final cut express have the functionality like macromedia flash 8? I'm looking to compile my movie for easy viewing on the internet

In the interest of not appearing like a total idiot
The link of my 3-minute video of Native American Indian dancing (above) has been changed to: http://www.goliveusa.com/MoviesFlv/PowWow.html
where it should remain for at least the next two years.
Part of this change has to do with a discontent with .Mac, thought that is certainly a topic for another forum.
Since back here at this thread, and considering the initial forum topic, I'd guess it would be appropriate to ask: "What is meant by the term: functionality?"
FCE is a a video editing program. Flash 8 is graphic animation program.
You can incorporate video into Flash 8 and do extra animation with it.
PowerPC G5 Duel 2.3 Mac OS X (10.4.5) 4.5GB RAM; 2HD's; CS2/FCE/Studio8/Maya7/Optura500/GoLiveUSA.com

Does final cut express hd 3.5 have bluesceen capabilities

does final cut express hd 3.5 have bluesceen capabilities??

Yes, it does. It has a number of filters to help do this.

Does Final Cut Express 4.0.1 work on OS 10.7.5?

Deos Final Cut Express work on OS 10.7.5? Upgrading to a new MacPro and Final Cut Pro X, but have unfinished project on FCE that is not opeing properly.

Last officailly supported OS was 10.6.8.
There have beed mixed results with 7 but Apple does not support the marriage.
This forum has plenty of info if you wish to search.
My thoughts/advice are: fix your issue and finish your Project with existing gear.
FYI: Mavericks and FCP X 10.1 seem fine.
Al

Does Final Cut Express work on the iMac G5?

I just tried to put Final Cut Pro on a G5 iMac, but the error came up that it is missing a AGP card. Apparently the new iMac have an upgraded card that doesnt work wih the older software.
Does anyone know if the Final Cut Express HD work on a G5 iMac?

For a permanent solution to stop the error message ever appearing again you can use this hack:-
1. Right click (Control-click) on the FCE application icon (NOT the one in the dock) and select "Show Package Contents".
2. Open the "Contents" folder and double click the "info .plist". It should open automatically in TextEdit - if it doesn't, choose TextEdit manually.
3. Around 15 or so lines down you will see AGP. Delete it and put in PCI.
4. Close the window and when asked if you want to save the changes, say yes.
Ian.

Does Final Cut Express 4 work with mac mini and other questions...?

I have a few questions I need help in answering... I would appreciate opinions on the following:
I am about to make a purchase of a new mac. I already have a mac mini PPC, but it is too slow...
Here is what I am thinking.
Mac mini, 2GB mem, 160GB hard drive. Will this new mac mini work with Final Cut Express 4?
Or should I go with the more powerful iMac?
I like to make movies on my mac but I hate iMovie 08 so I constantly use iMovie HD 06. Should I go to Final Cut Express 4 or just stick with iMovie HD 06?

There is no doubt that FCE 4 will run on an Intel mini - the GMA graphics processor is compatible. There is also no doubt that an iMac would give you somewhat better overall performance, though it's important perhaps to note that as complex as FCE is, it is actually a little less demanding on hardware than iMovie has traditionally been, so the difference between a mini with 2Gb RAM and a similarly equipped iMac will not be all that great in FCE, though it will become a little more noticeable if you continue to use iMovie 6.
The main reason for the performance difference between iMovie and FCE is that in order to provide a reasonably sophisticated video editing package that will run on very basic hardware, Apple relied heavily on caching techniques, meaning that while FCE basically spools from video and relies on CPU power, iMovie constantly moves data to and from the hard drive. The mini's hard drive is a (relatively) slow device in comparison to the iMac's - thus the iMac runs iMovie rather more seamlessly. In FCE, the difference is, as said, rather less clear unless you were to go for the top-end model.
If your budget can stretch to an iMac it makes sense to go that route simply because the extra power and overall performance (and the better graphics processor) will give you greater flexibility down the road. On the other hand, if funds are tight and you need to spend as little as reasonably possible, a mini will do fine, and is sufficient;y inexpensive that in a couple of years could be sold off and replaced without severe financial implications.
In terms of the choice between FCE or iMovie, beware that if you haven't used FCE before, the transition is not easy, and the learning curve for it is pretty steep. That said, it has far greater power and flexibility in terms of what you can achieve with it than has ever been possible with iMovie.
That said, for casual and home use, iMovie (version 6 at least) has plenty of power and tools for the majority of projects. iMovie 8 is, in many ways, deeply flawed for those who want that sort of power and workflow tools, being that it is designed for quick and easy creation of movies, not creative and considered productions. It has it's uses, but if you have experience with iMovie already, v8 is really not intended for you at all.
All that said, I've used iMovie 6 on systems will a lot less power than the current Intel minis, and have found it stable and workable, so I have no doubt it would work well on any current Mac.

Does Final Cut Express work with P2?

Has anyone tried to import footage from a Panasonic P2 Card to Final Cut Express 4.0?

Cannot do. You need FCP to work with P2.
Shane

Does Final Cut Express Work with Canon XF300 or Kodak Zi8?

Question... I JUST purchased Final Cut Express 4. Ihave a Cannon XF 300 and I have the XF plugin software but it doesn't to appear to have worked.
I used the same software at work..except work computers use Final Cut Pro and it works beautifilly... How did you get your Copy of Express to recognize your MXF files... or any files that came from your Canon XF for that matter?
While I'm on that note.. i alternatively use a Kodak Zi8 HD for vlogging and Final Cut tells me it can't recognize the files... ***?!? They're MOV files! Isn't that a native to apple format?
Feels like I ****** away almost 200 dollars..

The Zi8 records to .mov files but uses an H.264 codec. A QuickTime .mov file can be created using any one of a long list of audio and video codecs. Just because it's a .mov file doesn't mean it's compatible with any & every app.
The XF300 records to MPEG-2 Log GOP
Neither can be used directly in Final Cut Express
Both will need to be converted to QuickTime/Apple Intermediate Codec. I suggest using MPEG Streamclip to convert your raw video to QuickTime/Apple Intermediate Codec in order to edit in FCE. MPEG Streamclip is free; but you will also need the Apple QuickTime MPEG2 Component if you do not already have it on your Mac. ($19 from the Apple Online Store)
An alternative would be to Log/Transfer using Final Cut Pro into QuickTime/Apple Intermediate Codec. Then transfer the files to your Mac that has Final Cut Express.

Final Cut Express, Preview not working in Capture

I've just purchased Final Cut Express, and have installed it in my G5 iMac. When I try to download film from my Sony TRV 17, I am unable to do so. The preview screen has a message "Preview Disabled", and I am unable to capture anything. The capture controls seem to control the recorder just fine. Anyone have a simple answer?

I'd tried running the camera into the computer, and only using the internal hard drive, no change.
When the camera is off and I start the program I get a message stating that the camera is not connected, but as soon as I turn the VCR on and hit the retry button, the program starts. Which easy set up option should I use if not FW basic?
Try daisy-chaining the camera to the drive. Do not
use FW basic with that camera. Make sure the camera
is turned on in VCR mode, and reboot. Launch the
application. Does it see the camera at start up? If
not, try it with the LaCie disconnected, and see if
it works directly into the computer.

Does Final Cut Express export XML?

I work with an editor who uses Final Cut Express, but I can't open his projects with my FCP 4.5 system. Does Express export XML? And is that the solution?
Thanks,
- Kevin

Doesn't seem to.
http://www.apple.com/finalcut/

Imovie or final cut express, which one works best?

I am sick and tired of all the bugs in imovie. And I feel bad for everyone who are going out of their minds with soooooooo many problems with imove. I'm ready to buy final cut express, but does any one know if final cut express will run alot smoother and more relieable than imovie?
Thanks, ED

Hi M
I also use iMovie (pref v6) and FinalCut Express (3.5.1) and FCP (5.x.?).
FinalCut Express and Pro are rather same in work flow. iMovie is mentally
somthing completely different.
You need to be a very organized person to get the best of FCE eg. numbering all
Your tapes (tape unique numbering), preparing a structure from beginning etc.
BUT: The freedom of about 99 video and audio tracks. Resizing a video track
above another (pic-in-pic), rotating a slightly off horizon eg 2 deg, color-
correction (much better than in iMovie), Green/blue screen and so much more
that needs plug-ins to iMovie (with a cost) as standard.
Can give Your creativity a real spinn.
Yours happy with both worlds: Bengt W

Why does Final Cut Express 4 quit automatically when I open Log and Transfer window?

I'm using a Sony NXCAM and I am editing on a Mac OS X. The clips I have recorded are in MTS format so I understand I must use the Log and Transfer setting to import my clips. I plug the camera into my computer, go into Final Cut Express 4, turn the camera on, and then go into the Log and Transfer window. Once I open that, Final Cut quits and an error message pops up that reads, "Final Cut Express quit unexpectedly." Final Cut quits too fast for me to even click on anything in the Log and Transfer window. I really don't understand why it does this. The only thing I can think of why Final Cut is quitting is because I have over 100 clips on the camera, so maybe that is too much for Final Cut Express 4 to handle. However, I wouldn't think that would be the case. If anyone knows of anything I could do to fix this problem, then please send me a reply. I've looked around the internet to see if anyone else has had this problem, but I haven't found anything. Thank you, any responses will be greatly appreciated!
-Snowconedxx39

Shooted videos directly saved to the SD memory card is no problem, the log and transfer window immediately recognizes the sd card and I was able to convert the videos. I will check later today if this were 25p, 50i or 50p footages.
Strangely enough is that transferring the .mts files from the internal memory to the sd card (using the Mac finder, I don't know if it is possible within the camera itself) won’t help, the log and transfer window doesn't the recognizes the transferred files, strange!
I hope that this problem will not occur using Final Cut Pro X, which I will start using soon.
I'm curious what the exact problem will be.

Does final cut express 4.0 work in new macbook bought in Oct 2013

Similar Messages

Maybe you are looking for