Does Final Cut Express export XML?

I work with an editor who uses Final Cut Express, but I can't open his projects with my FCP 4.5 system. Does Express export XML? And is that the solution?
Thanks,
- Kevin

Doesn't seem to.
http://www.apple.com/finalcut/

Similar Messages

  • Does Final Cut Express support ProRes 1080p?

    Does Final Cut Express support ProRes 1080p?

    Hi(Bonjour)!
    ProRes codecs was introduced with Final Cut Studio 2.
    You can't create a ProRes sequence in FCE, but if you've installed the +Apple ProRes QuickTime Decoder 1.0 for Mac+ you will be able to import ProRes footage, but rendering or conversion will be needed.
    http://support.apple.com/downloads/AppleProRes_QuickTime_Decoder_1_0_forMac
    Michel Boissonneault

  • Does final cut express have the functionality like macromedia flash 8?

    does final cut express have the functionality like macromedia flash 8? I'm looking to compile my movie for easy viewing on the internet

    In the interest of not appearing like a total idiot
    The link of my 3-minute video of Native American Indian dancing (above) has been changed to: http://www.goliveusa.com/MoviesFlv/PowWow.html
    where it should remain for at least the next two years.
    Part of this change has to do with a discontent with .Mac, thought that is certainly a topic for another forum.
    Since back here at this thread, and considering the initial forum topic, I'd guess it would be appropriate to ask: "What is meant by the term: functionality?"
    FCE is a a video editing program. Flash 8 is graphic animation program.
    You can incorporate video into Flash 8 and do extra animation with it.
    PowerPC G5 Duel 2.3   Mac OS X (10.4.5)   4.5GB RAM; 2HD's; CS2/FCE/Studio8/Maya7/Optura500/GoLiveUSA.com

  • Does Final Cut Express 4 Read Clips From an External NAS Drive?

    After upgrading from iMovie 08 to 09 I have found out through these pages that iMovie no longer supports reading clips from and writing them to my external wireless drive (via the Events library). The question for this forum - does Final Cut Express 4 have the same issue?
    Just to anticipate a couple of points - I do not intend to use my external hard drive for 'in line' editing, it is merely a repository for excess clips that my hard drive cannot accommodate. I understand this kind of arrangement is slower than Firewire 800 but it is what I have and I want it to work.
    Message was edited by: Plutonian

    FCE has nothing to do with how you archive your media as long as it's not used for playback within the application. The only issue might be how the drive is formatted. For large media files it really needs to be formatted in Mac OS Extended.

  • Does final cut express hd 3.5 have bluesceen capabilities

    does final cut express hd 3.5 have bluesceen capabilities??

    Yes, it does. It has a number of filters to help do this.

  • Can't use Final Cut Express Export Using Quick Time Conversion with iDVD.

    I am using iDVD 08v 7.0.4 and until 3 days ago I could import and create iDVD's using Final Cut Express export using Quick Time Conversion. There was an update that downloaded for iDVD. Since then, I can only use Final Cut Express Exports that is a self contained Quick Time Movie.
    I have never had this kind of apple and apple problem. I am disappointed that I'm having apple issues like this.

    Are you on latest 10.5.x release and latest FCE updates? Your info line says 10.5.1 and you didn't list FCE version. Not saying that will fix problem, but might help. You also might want to explain how you did your Quicktime conversion.

  • Final Cut Express - Exporting problem

    I have used Final Cut Express for years with no problems. All of a sudden, when I export my sequence into a Quicktime Movie, the resulting movie has intermittent problems with photos. ALL my movie clips work fine. However, random pictures “get stuck” and will simply remain on screen wiping out several pictures that follow. The sound continues correctly, but the movie remains fixed on a given photo. At some point, the movie goes back to normal and pictures and clips show correctly, until the same problem repeats itself.
    I tried removing the software from my system and restoring from scratch but that did not help. The problem is also not with a given picture or transition, because if I redo making the movie the problem will usually display itself at a different location. Does anyone have a suggestion as to what might be causing this problem?

    Dragging the photos to your timeline should work, though the normal route is to import them and then drag them from the browser. User-installed plugins are located in three different places:
    FxScript Plugins:
    User > Library > Preferences > Final Cut Express User Data > Plugins
    Macintosh HD > Library > Application Support > Final Cut Express Support > Plugins
    FxPlug Plugins:
    Macintosh HD > Library > Plug-Ins > FxPlug
    You should copy all user-installed plugins to a different location before reinstalling, then place them back in their respective folders afterward.

  • Does Final Cut Express 4.0.1 work on OS 10.7.5?

    Deos Final Cut Express work on OS 10.7.5?  Upgrading to a new MacPro and Final Cut Pro X, but have unfinished project on FCE that is not opeing properly. 

    Last officailly supported OS was 10.6.8.
    There have beed mixed results with 7 but Apple does not support the marriage.
    This forum has plenty of info if you wish to search.
    My thoughts/advice are:  fix your issue and finish your Project with existing gear.
    FYI: Mavericks and FCP X 10.1 seem fine.
    Al

  • Why does Final Cut Express 4 quit automatically when I open Log and Transfer window?

         I'm using a Sony NXCAM and I am editing on a Mac OS X. The clips I have recorded are in MTS format so I understand I must use the Log and Transfer setting to import my clips. I plug the camera into my computer, go into Final Cut Express 4, turn the camera on, and then go into the Log and Transfer window. Once I open that, Final Cut quits and an error message pops up that reads, "Final Cut Express quit unexpectedly." Final Cut quits too fast for me to even click on anything in the Log and Transfer window. I really don't understand why it does this. The only thing I can think of why Final Cut is quitting is because I have over 100 clips on the camera, so maybe that is too much for Final Cut Express 4 to handle. However, I wouldn't think that would be the case. If anyone knows of anything I could do to fix this problem, then please send me a reply. I've looked around the internet to see if anyone else has had this problem, but I haven't found anything. Thank you, any responses will be greatly appreciated!
                                            -Snowconedxx39

    Shooted videos directly saved to the SD memory card is no problem, the log and transfer window immediately recognizes the sd card and I was able to convert the videos. I will check later today if this were 25p, 50i or 50p footages.
    Strangely enough is that transferring the .mts files from the internal memory to the sd card (using the Mac finder, I don't know if it is possible within the camera itself) won’t help, the log and transfer window doesn't the recognizes the transferred files, strange!
    I hope that this problem will not occur using Final Cut Pro X, which I will start using soon.
    I'm curious what the exact problem will be.

  • Does final cut express support avchd lite?

    Will final cut express resolve this issue, being that most of Panasonic's point and shoot cameras use avchd lite?
    Reasons I bought this program:
    One its good for editing.
    Two it says its avchd compatible on the box.
    However this does not seem to be the case.
    definition of avchd lite: http://en.wikipedia.org/wiki/AVCHD

    You make a good point about the audio. I have a Canon SD870 and recently shot some stills and video with it at a birthday party. It takes great shots, but I was actually impressed with the video and audio, probably because I did not know what to expect. In fact, it gave me enough material to edit a little movie for the birthday boy,(he was 50!) in imovie9. The speeches came out clear and the video was very acceptable.
    But things can always be better, and that is why I want to upgrade to FCE, and buy a still camera that can shoot HD on the fly and can be used in FCE. I have been a Broadcast Sports TV cameraman for over 25 years, and I am very tired of lugging around bulky TV camera equipment. It seems a novelty to be able to shoot and edit HD on a pocket size camera.
    Thanks for you input Al, I appreciate it. I still have two outstanding questions and I apologize if you have already answered them. First, How good/bad is the video quality with HD video captured on AVCHD Lite and then converted to use in FCE? Second, where does MPEG 4 rate in all this. Thank you.
    Bill

  • Does Final Cut Express HD 3.5 support 30p/DVX100?

    Hey,
    Something I need to know. Will 'progressive scan' be preserved? I do not want it to interlace the video once it is imported/captured.
    Does anyone shoot 30p on the Panasonic DVX100 witih Final Cut Express HD 3.5?
    Chris

    Maybe this can supply you with some information.
    http://discussions.apple.com/thread.jspa?messageID=1578072&#1578072
    Remember to mark as helpful or solved.
    -benny

  • Trouble making the text in scrolling credits (made on Final Cut Express) export clear and not fuzzy

         I am having difficulty making the text in the scrolling credits in Final Cut Express clear and not fuzzy. I went under effects, then clicked video generators, then text, then scrolling text to get the scrolling credits working. I tried using the Chroma Keyer effect and the Color Key Effect. These work on captions on video and beginning titles but not the scrolling text. All of those were made on livetype so maybe that is why. I would really appreciate some help. I've been working on this all day. I was on the technical support line for about 40 minutes and they told me there is no more help given over the phone for Final Cut Express and that I should go on here and see if anyone can answer my question. I looked on all the forums and there was nothing on this subject. Thanks.

    The software is not doing what it should be doing.  We have all had this type of problem.  It is nearly always somehow in the way the software is being used.  Look at your added Chromakey and color key.  You must be doing something that the FCE does not like.  Open a new project and new sequence and try the exact same thing.  (I use titles from LiveType and from the effects tab and have no problems)

  • Final Cut Express export options missing

    I use the latest version of Final Cut Express on A G5 Quad and have recently lost certain options in the 'export using quicktime conversions' menu. I have always used Motion jpeg B but this is now missing along with Motion jpeg A!
    This didn't coincide with any software installations or updates. And I've just run the Apple software update for FCE and Quicktime but there's still no difference.
    Any ideas please??
    Jason

    Thanks Tom. The mjpeg compression options were there a week ago, I'll try installing the software on my laptop to see what happens. Anyhow I've noted that the stock agent will accept photo jpeg compression so perhaps I have nothing to worry about.
    I appreciate your taking the time to advise me.
    Jason

  • Final Cut Express Exporting

    I am wanting to export from Final Cut Express to a Hard Drive and playback through a network. Trying to achieve a 16:9 format in full screen. I can get 16:9 but only in the centre of the screen. i.e. Black around the picture. Any ideas greatly appricated.

    Hello Alchroma,
    Clip Propoties in timeline
    Creator:  MPEG Streamclip
    Size:  1003.5 MB
    Vid Rate: 25 fps
    Frame Size:  960 x 540
    Compresor:  H.264
    Data Rate: 478.8 K/Sec
    Pixal Ascpect: Square
    Sequence Settings
    Timeline Options
    Track Size: Medium
    Thumbnail Display: Name plus Thumbnail.
    Render Control :
    Frame rate and Resolution both at 100%
    Both Filters and Frame blending for speed are ticked.
    Thanks
    WS

  • Does Final Cut Express allow you to create EDLs?

    Considering purchasing Final cut express but wondering if anyone know if it allows you to create EDLs?
    Also curious as to wether timelines created in Express can also be used in Studio?

    A timeline created in FCE can be used in FCP, but not vice versa. FCE has no EDL export function.

Maybe you are looking for

  • Family Sharing and iTunes for Windows

    My wife and I have family sharing set up and working fine across iOS devices and my macs.  She uses iTunes for windows and we can't find how to access my purchases on her machine.  We looked in the same place it is in iTunes for Mac and there is no p

  • Message "Could not save because there is not enough memory (RAM)"

    Running Mac OS9.2.2 Suddenly start to get and error message " An error occured saving the enclosure "file name" Not enough memory" when trying to save an attachment in Microsoft Outlook. Same thing with Adobe Photoshop - when trying to save an any ne

  • IBooks in classroom - put to sleep or shut down?

    I am an educator using 800 iBooks with high school students. We have a mobile cart that charges the units when the students return them to the cart between classes. Which would be more beneficial...having the students just log off of them, close the

  • Invalid path /jsp/AFDashboardPageView Error with 3.1 dashboard

    Anyone run into this error with displaying dashboards in InfoView 3.1 (on sp2, fixpack 2.7): HTTP Status 400 - Invalid path /jsp/AFDashboardPageView was requested.  It's not the dashboard itself - displays fine in edit mode and even simple test ones

  • How to automate Thorlabs TDC001 motor

    Hi.  I am trying to automate the control of a Thorlabs motor, this question has been asked before but I don't think there has been a satisfactory answer.  I have the motor connected to a rotation stage and I would like to be able to tell the stage to