Does Fire fox work with 64 bit machines

I have a new 64 bit machine and want to know if fire fox will work please.

To be more clearer...
Mozilla has yet to make a official 64-bit version of Firefox for 64-bit Windows Vista/7 and the earliest that may happen is Firefox 12.0.
Firefox 32-bit does work on 64-bit Windows Vista/7. You also need the 32-bit browser plugins.
http://www.mozilla.org/en-US/firefox/9.0.1/system-requirements/
Windows
Operating Systems
Windows 2000
Windows XP
Windows Server 2003
Windows Vista
Windows 7
Please note that while the 32-bit and 64-bit versions of Windows Vista and Windows 7 can be used to run Firefox 9, only 32-bit builds of Firefox 9 are supported at this time.

Similar Messages

WILL THE NEW FIRE FOX WORK WITH A LOGITECH MOUSE AND KEY BOARD? I THOUGHT I READ SOME WHERE IT WASN'T COMPATABLE. THANKS JOHN

I WANT TO DOWN LOAD NEWEST VERSION OF FIRE FOX BUT AM HESITANT TIL I FIND OUT MORE THANKS, JOHN

John,
Firefox will work with any mouse and keyboard that your computer supports. However, if your computer will not support the mouse or keyboard. Let's say it's a Windows 7 Computer and the mouse was only tested up to Windows XP and is a USB mouse then there may be a case where your mouse will not work. Firefox will never not work with a mouse and keyboard. Remember thoe, if it's a USB Mouse and Keyboard and it says that it's compatible up to Windows XP it will not work on Windows 7 or if it does work it may not work well.
Thanks,
Scott

Does filevault encryption work with time machine?

Filevault under Snow Leopard would allow you to encrypt data on your Mac disk but was not compatible with Time Machine i.e. you could not back it up once encrypted or restore it.
Does anyone know if this has been addressed in Lion i.e. data encrypted in Filevault is capable of being backed up to a time capsule and is recoverable using Time Machine.
The release documentation does not make this clear, although a technician led me to believe it would be fixed in Lion.

According to my experience and to this -> http://support.apple.com/kb/HT1427, FileVault in Snow Leopard was compatible with Time Machine.
The thing was that, as FileVault encrypts your home folder as a disk image in 10.6, Time Machine was backing up that encrypted disk image. So
1. Time Machine could backup your home folder only when you were not logged in your user session and the computer was awake
2. with this system, you could not browse your home folder in the Time Machine incremental backups, but could only restore your complete home folder from that encrypted disk image.
In Lion, however, Filevault 2 encrypts your complete hard drive.
This means:
1. You can use Time Machine with FileVault 2 enabled in Lion (http://support.apple.com/kb/HT4811)
2. Recovery HD must be present on your computer's startup volume to use FileVault 2 (not an external Recovery HD) (http://support.apple.com/kb/HT4718)
I guess Time Machine, like it used to do with the user's home folder in 10.6, will backup your encrypted hard drive in Lion, but you will not have the ability to browse your Time Machine backup to find specific files / folders in the backup. But this backup can be used to restore your system. (http://support.apple.com/kb/HT4811)
(May someone correct me if I'm mistaken there ?)
More info about FileVault 2 in Lion -> http://support.apple.com/kb/HT4790

How do you enable fire fox work with mac track pad the two finger swipe to move back or forward

when using safari or chrome on the lion operating system you can use the track pad to move from one page to another either forward or backward. It is done with a two finger move. This does not work on firefox

You can set the related browser.gesture.* prefs to an empty string on the <b>about:config</b> page.
*http://kb.mozillazine.org/about:config

Does Dreamweaver CS3 work with 64 bit version of Windows 7?

Windows 7, 64 bit, Home Premium was clean installed. I had no difficulty reinstalling Dreamweaver CS3, but when I try to open a file I get a message that says." A problem has caused the program to stop working correctly. Windows will close the program and notify you if a solution is available." Apparently none is. So my question is, does Dreamweaver CS3 work with the 64 bit version of Windows 7? If not, does CS4 work or would I be wasting money by upgrading?

I just installed it and ran it fine. I have Windows 7 Ultimate 64 bit
Make sure it is a clean install from a fresh "boot". I ran into problems the first time when I tried to install it right after I installed another program. I simply uninstalled it.....which took a long long time, but after it was removed and I rebooted, everything went fine.
Rick

Does Visio 2013 work with Office 2010?

Does Visio 2013 work with Office 2010?

Tuesday 01/06/2015
Take a look at this Microsoft KB
KB2784668
It has one reference to Visio and the support / install order of Office.
Now with that said, regardless of 2010 vs. 2013, you can NOT mix 32-bit or 64-bit versions of Office.
For example, lets say I installed Office 2010 SP2 64-bit
(FYI... How to determine Office 2010 SP file version
KB2121559)
I then want to install Visio 2013 32-bit, the install will not work.
You cant mix 32-bit and 64-bit versions of Office Products.
TechNet article explains more...TechNet
(FYI...A few more people are asking the same question...)
Forum 1
Forum 2
(How to determine which version 32-bit or 64-bit version of Office is installed
Stackoverflow.com)
Above article is dependent on Full Office being installed... You can also query the DisplayName REG_SZ key as well, it will report back the Office version.
Registry Location:
HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall
Look for the Office GUID in my example for 2010 64-bit SP2....
Now with the above said, below are notes from one of our desktop support techs in regards to issues we have seen internally running Office 2010 32-bit SP1 and SP2 on Win 7 x64 Enterprise with Visio 2013.....
Office interops. The ability for office and other applications to communicate with other office apps.
The first instance today: User sends corporate communications from word using the send to mail recipient feature. After visio 2013 installed, he received a message stating that word could not communicate with outlook, to either repair office or check the
server. Office was repaired, new outlook profile created. After research, discovered the office is sensitive to various versions in regards to interops. Discovered that Visio 2013 was installed around the time user experienced issues. After uninstalling visio,
when launching word it began to configure (like for a first time install), the send mail to recipient feature began working. This probably will affect anyone with visio 2013. Visio 2010 was not reinstalled afterwards, as user barely uses it and was hesitant.
Installation files are still on his machine in the event that he does need it reinstalled. Office version is 14.0.7109.5000 User is on Office 2010 SP2
The second instance today: Teammate stopped working 3 weeks ago according to user. After working through several support groups here and working with the vendor support, the vendor noted that some dll’s from the application were not registered. If that didn’t
fix it they suggested a reimage. After registering the dll’s, issue persisted. After further troubleshooting, determine that the feature that did not work for user consisted of teammate downloading information from a system, parsing it, then outputting it
to a word document. The application provided no error of any sort, it just would never get to the word document portion. Discovered that Visio 2013 was installed around the time that the issue occurred, and that the issue appeared to be related to office interops.
I uninstalled Visio 2013 and it began working as designed. In both cases Visio 2013 had been installed on 11/25/2014 (I didn’t see any corporate communication about an upgrade, but maybe one took place?). Office version is 14.0.7109.5000 User is on Office
2010 SP2
I’m not sure if you have much experience with interops, but pretty much anytime you want to communicate with a different office application, that is how it is done. Per my reading through various Microsoft KB’s and support forums, different version interops
do not play well together always. It appears that these applications are trying to communicate to office 2010 (v 14) using 2013 (v15) interops, only after installing visio 2013 professional. Users were both Windows 7 x64. We also had a group of several users
who also ran into issues with sharepoint not working in any browser, turned out the problem was Visio 2013 was well....
Feel free to research more, but my own research comes down with having both 2010 and 2013 interops on the machine. To simplify it, the applications and office apps are being told to communicate using office 2013, and but only listen in 2010, causing problems.
Its not causing problems with every simple interop, or we would see it far more widespread, but we are going to continue to see the “ghost” issues where Visio 2013 is the root cause, but nothing is really going to scream it.

Is it possible to configure Time Capsule to work with Time Machine (MBP) and Genie Timeline (PC)

I have an Apple Time Capsule (2TB) and I need to configure it to work with my MBP and Time Machine and also back up my a PC with Genie Timeline Pro 2013 (or any other suggested PC back up software).
Setting it up to work with Time Machine is simple enough but the PC access is proving to be difficult.
http://www.genie9.com/support/KB/KnowledgeArticle.aspx?KBID=198
I followed the above steps but still can't connect to the network drive. I have reformatted the TC and will be walking through the steps again. My concern is that the two different operating systems (Win8 and Mavericks) can't share the same destination drive.
I have created two user accounts with drive sharing activated. One in my name for my MBP and the other in the name of my partner for her Dell laptop.
Should the Time Capsule be partitioned? Can it even be partitioned? When I use Drive Utility it can't see the TC. The only way to connect to it seems to be via Airport Utility.
On a seperate note the TC Router Mode is set to OFF (Bridge Mode). I have connected it to the ADSL modem/router (WiFi Off) via the WAN port. All seems to be well. Am I loosing any useful functionality by doing this?
The internet settings are set Connect Using DHCP. I have no issues but I am not really sure what it means and if I should be using other settings. The ADSL modem/router seems to have all the PPP0E settings.
The WiFi on the TC has been set up with a 5Ghz and 2.4Ghz network as well as a Guest Network. I then plan to introduce 2 Airport Express (MB321LL/A). One will be an access point for AirPlay and the other a wireless extender with AirPlay.
There is also a Canon WiFi printer that accesses the 2.4Ghz network. It has an Ethanet port so I am wondering if I should disable the wifi connection and cable it and if so to the TC or the DSL modem/router.

Lion, 7.6.1 firmware and iCloud offers remote access.
http://www.apple.com/au/support/icloud/back-to-my-mac/
To do it without the iCloud service your issue is static public IP address.. if you have one this is simple to the point of trivial. If not it is very hard, as Apple did not put in a standard dynamic DNS service.. (ensuring you were roped into their cloud accounts). Static IP from your ISP is the best solution.. if it is possible go for it.
Then the actual protocol for access is AFP, so the only device you can do this on is a Mac.
Do you have the TC as the main router?
If you want any other kind of access, or to avoid icloud use vpn.. which teamviewer is a kind of.. but buy a real vpn router, and bridge the TC.. you can then vpn into your network with full security and get windows access via smb..

How does adobe encoder work with windows 8? I can't get it to work.

How does adobe encoder work with windows 8? I cant get it to work.

Flash Media Live Encoder doesn't work with Windows 8.
The best it gets is Windows 7 64 bit.

Recovery and Applications CD not configured to work with this machine.

Satellite A215-S4757
Machine trashed due to virus and want to reset to original configuration. Using disk 1 of 2 labeled RECOVERY AND APPLICATIONS/DRIVERS SATELLITE A210/215 SERIES WINDOWS VISTA HOME PREMIUM 32 BIT. When the CD boots an error is displayed. The error reads:
"This Recovery and Applications CD is not configured to work with this machine (*).
This CD is for: Satellite A215, Satellite A210
Please use the correct Recovery and Applications CD."
Can you tell me why this is not recognizing the machine correctly? Thanks for the help.
R/Jim

Satellite A215-S4757
You need the utility which resets the DMI string for that model. Call Toshiba tech support at 800-457-7777.
-Jerry

Looking for a back up drive for photos and videos that works with time machine, prefer wireless. Time capsule has poor reviews and already have BT hub

Looking for a back up drive for photos and videos that works with time machine, prefer wireless. Time capsule has poor reviews and already have BT hub that serves as a good router. 3gb or 4gb capacity preferred but 2 would suffice.

Plug a NAS into the BT Hub that does TM. Look at Synology.
You just use the wireless of the hub.
But the cheapest solution is still the TC.

I photo don't work with Time Machine

I just have 2 weeks using this macbook, and i made a Time Machine just before sell my other macbook. Both have Lions because both are same 2.4 Ghz
Intel core i5 (the only difference is HD Disk). So i made all the time Time Machine, so i bring on all my information from my Time Machine disk... and everithing works fine BUT not my pictures.
I lose all the pictures that i put in that Iphoto from day 1 that i use the other computer (6 months ago).
Its like Iphoto doesn't work with Time Machine.
To me is very important to someone from apple to explains me since, if that don't work as it suppose to be, then i have to look for a better bacjup program than this garbage.

1 - TimeMachine does work with iPhoto - except if iPhoto is running then the iPhoto database is not backup up until a backup cycle runs while iPhoto is not running
2 - Never "assume" that a backup is good - you must test it
3 - teh simple solution is to Connect the two Macs together (network, firewire target mode, etc) and drag the iPhoto library intact as a single entity from the old Mac to the pictures folder of the new Mac - launch iPhoto on the new mac and it will open the library and convert it as needed and you will be ready move forward.
4 - no one from Apple will explain anything to you here since this is strictlhy a user to user forum
5 - as to which backup program you use - totally your choice - no one here cares at all - we are willing to help you with iPhoto issues but could care less about if you use Apple software or not - since you obvviously have not bothered to learn how to use Time Machine you will have the same or similer problems with any software that you use incorrectly
LN

Does compressor 4 work with final cut pro 7?

does compressor 4 work with final cut pro 7?

Russ H wrote:
WHile I'm not 100% certain (this has come up before and It's not convenient to test), I believe that purchasing Compressor will also allow you add additional codecs to your QT library.
Russ
Yes, Compressor adds several codecs, which can also be used in FCE (decoding and encoding using QuickTime Conversion) and in QuickTime player. Most notably these are MPEG-2 and ProRes. The latter is an editing-friendly Intraframe-Codec useful for preprocessing stuff for importing clips to FCE, particularly if it has a different framerate from the FCE project.
I'm also still using FCE 3.5(*) and the "Export using Compressor" menu option remains grayed out, which is a pity, but the new codecs can still be used. I mostly use it to make stuff for DVDs, using my ancient and cumbersome iDVD.
(*) It really works on Lion, provided you have installed it on a previous Mac OS release and then migrated or upgraded to Lion: the installer is a PowerPC program, but the installed program is Universal and works fine and very stable. If you already have Lion, and no older (Snow) Leopard machine, it's going to be more of a challenge, since the Lion kernel no longer supports PowerPC binaries, so Rosetta won't work.
Bernd

Does Boot Camp work with Fusion Drive

After having Boot Camp fail this morning while partitioning the drive, and now having to erase and restore my entire hard drive, 500GB worth of crap, I am wondering -- does Boot Camp work with the fusion drive? My new iMac has one of these things, and I am wondering if that is maybe the reason it did not work.
Thanks
Bob

mende1 wrote:
A virtual machine is less risky because it doesn't modify your hard disk. However, it gives you less performance because it doesn't use all the hardware of your computer.
While that is true the actual performance available depends on how much resources you have, and how much is made available to Windows. (Win 7 in BC on my iMac gets a 5.9, in a VM it gets a 4.8) all the reduction is in the graphics performance. Disk performance in the VM is faster. I have 16GB or Ram, the VM gets 8 of that when it is running.
If games are to played a VM is useless.

Does Windows 7 work with an Airport Extreme. Mine does not recognize it

Does Windows 7 work with an Airport Extreme. I can't get mine to connect with it? The package insert says it only works with XP or Vista

This should help:
http://docs.info.apple.com/article.html?artnum=86258
Use system profiler to identify which iMac you have
exactly. If your iMac has USB 2.0, then I think you
can only fit Airport Extreme anyway.
I have a question too ... I'm about to fit an Airport
Extreme extreme card to my 15 inch USB 2.0 iMac too.
Is the aerial already built in? I presume one is
required in some form?
James--I'm afraid that your link doesn't help me. I'd already seen that, and found that my iMac seems to correspond to two different categories--being both a 17-inch flat panel, and a 17-inch 1GHz. According to Duane's post, iMacs with clock speeds of 1 GHz or greater take the Airport Extreme card. According to two different individuals at a local Apple Store, I got two answers. One said Extreme, the other said, nope, the old Airport. How do I determine the "for sure" answer? Anybody know?
FWIW, here's my sys profile info:
Hardware Overview:
Machine Model: iMac
CPU Type: PowerPC G4 (3.3)
Number Of CPUs: 1
CPU Speed: 1 GHz
L2 Cache (per CPU): 256 KB
Memory: 512 MB
Bus Speed: 133 MHz
Boot ROM Version: 4.5.8f1
Serial Number: QT3050UCNHX
Thanks any and all for help.

Fire fox opens with tabs from preveous session not home page in tools under options and tab general I have start up with home page but all tabs from previous session open instead

fire fox opens with tabs from preveous session not home page in tools under options and tab general I have start up with home page but all tabs from previous session open instead

It is possible that there is a problem with the files [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
Delete [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
* Help > Troubleshooting Information > Profile Directory: Open Containing Folder
If you see files sessionstore-##.js with a number in the left part of the name like sessionstore-1.js then delete those as well.
Deleting sessionstore.js will cause App Tabs and Tab Groups to get lost, so you will have to create them again (make a note).
See:
* http://kb.mozillazine.org/Session_Restore

Does Fire fox work with 64 bit machines

Similar Messages

Maybe you are looking for