Does firefox allow you to have a firefox email account?

Can I have an email address with Firefox.com like yahoo and msn/hotmail and gmail?

firefox doesn't support email service,but you can use [http://www.mozilla.org/en-US/thunderbird/features/ Thunderbird], an email application of mozilla, where you can have personalized email address and you can also see your gmail and yahoo mails from here.

Similar Messages

How many sessions does SAP allow you to have ??

Dear Memebers,
How many sessions does SAP allow you to have ??
a) 3
b) 6
c) 9
d) 12.
I guess the right answer is B and C but in choices I have to select only 1, which answer will you pick and Why ??
Thank You.
Madhu.

> I wanted to know for sure what is the answer.
Hi Madhu,
If you are going to ask questions such as these, then please indicate that you have searched and what you do already know and where & why you have a doubt somewhere which is worth discussing in the forum or sharing opinions or experiences on.
Just asking for the answer only so that you don't feel too alone when answering 6 in the interview is of little value.
Normally such "answer a, b, c, or d only or be quiet"-type-threads (like certification tests are) are deleted. That is the rules, and we have them for a reason.
Anyway, you guys seem to have sorted this out amongst yourselves so there is no reason to interfere here IMO. Thanks for that.
Cheers,
Julius

I have an Ipad 2 and are having problems sending out emails in one of my email address. I always get a message reading the email was not sent because the server does not allow relaying. This is an email account POP3. I have no such problem with gmail.

I have an Ipad 2 and are having problems sending out emails in one of my email address. This is a POP3 email Account? I always get a message reading that the email was not sent because the server does not allow relaying. I have no such problem with gmail. What could be the problem and how do I resolve this. Is it about settings?
Richard.

Welcome to the Apple community.
If you are unable to remember your password, security questions, don’t have access to your rescue address or are unable to reset your password for whatever reason, your only option is to contact Apple ID Support, upon speaking to an operator you should explain that your problem is related to your Apple ID, this way you will not be charged for assistance, even if you don’t have an AppleCare plan.
The operator will take you through some steps you may have already tried, however they need to be sure they have exhausted all usual approaches before trying to reset your account, so you should try to be helpful and show patience with the procedure.
The operator will need to verify they are speaking to the account holder and may ask you some questions that only the account holder could know, and you will need to answer them if the process is to proceed.
Once the operator has verified your identity they will send a message through to your device which contains an alpha numeric code, which you will need to read back to them.
Once this has been completed they will send an email to your iCloud email address after a period of 24 hours, so you should check that mail is enabled in your devices iCloud settings.
Upon receipt of the email, use the reset link provided to reset your password, after which you should be able to make the adjustments to iCloud that you wish to do.

HT4859 My iCloud does not allow me to change my user email account. How can I change to a new email account and restore my iCloud?

I was recently hacked so I had to change to another email account and now iCloud won't let me back up because it is still only allowing the old email acct to be the main one. How can I switch to a new email account for my iCloud?

Welcome to the Apple Community.
In order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, then add it back using your updated details. (Settings > iCloud, scroll down and hit "Delete Account")
Providing you are simply updating your existing details and not changing to another account, when you delete your account, all the data that is synced with iCloud will also be deleted from the device (but not from iCloud), but will be synced back to your device when you login again.
In order to change your Apple ID or password for your iCloud account on your computer, you need to sign out of the account from your computer first, then sign back in using your updated details. (System Preferences > iCloud, click the sign out button)

In Security, clicking on the "Saved Password" button displays your current saved password for each site. It does not allow you to change a password. How would you do that?

In Security, clicking on the "Saved Password" button displays your current saved password for each site. It only allows you to view and delete site passwords. It does not allow you to change a password. How would you do that?

If you enter a new password Firefox should offer to change the password.
*You may not need to delete the old password. Try "Refreshing" the page, entering the site again, you may need to let Firefox fill in the old password, then enter the new password, and Firefox should ask to save the new password. See:
**http://kb.mozillazine.org/Deleting_autocomplete_entries
*If you delete the old password, you may need to "Refresh" the site after deleting the old password.
If you want to delete the password that has been saved do the following:
#In the Tools menu select Options to open the options window
#Go to the Security panel
#Click the "Saved Passwords" button to open the passwords manager
#Select the site in the list, then click Remove
 
 
'''You need to update the following.''' The Plugin version(s) shown below was/were submitted with your question and is/are out of date. You should update to avoid known security issues with the version(s) you have installed. Click on "More system info..." to the right of your question to see what was included with your question.
*Adobe PDF Plug-In For Firefox and Netscape 8.3.0 (''Note: this is a very old version and installing the current version may not delete it or overwrite it. To avoid possible problems with having 2 versions installed on your system, you may want to remove the old version in Windows Control Panel > Add or Remove Programs before installing the new version'').
*Shockwave Flash 10.3 r181 (''this may be current but a new version was released on 2011-06-14 with a ".26" after the "181". You can use the Plugin Check below and/or look in Add-ons > Plugins for the version of Shockwave Flash that you have installed. The newest version will be shown in Add-ons > Plugins as "Shockwave Flash 10.3.181.26"'').
*Next Generation Java Plug-in 1.6.0_24 for Mozilla browsers
#'''''Check your plugin versions''''' on either of the following links':
#*http://www.mozilla.com/en-US/plugincheck/
#*https://www-trunk.stage.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#*There are plugin specific testing links available from this page:
#**http://kb.mozillazine.org/Testing_plugins
#'''Update Adobe Reader (PDF plugin):'''
#*From within your existing Adobe Reader ('''if you have it already installed'''):
#**Open the Adobe Reader program from your Programs list
#**Click Help > Check for Updates
#**Follow the prompts for updating
#**If this method works for you, skip the "Download complete installer" section below and proceed to "After the installation" below
#*Download complete installer ('''if you do NOT have Adobe Reader installed'''):
#**SAVE the installer to your hard drive (save to your Desktop so that you can find it after the download). Exit/Close Firefox. Run the installer you just downloaded.
#**Use either of the links below:
#***https://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox ''(click on "Installing and updating Adobe Reader")''
#***''Also see Download link''': http://get.adobe.com/reader/otherversions/
#*After the installation, start Firefox and check your version again.
#'''Update the [[Managing the Flash plugin|Flash]] plugin''' to the latest version.
#*Download and SAVE to your Desktop so you can find the installer later
#*If you do not have the current version, click on the "Player Download Center" link on the "'''Download and information'''" or "'''Download Manual installers'''" below
#*After download is complete, exit Firefox
#*Click on the installer you just downloaded and install
#**Windows 7 and Vista: may need to right-click the installer and choose "Run as Administrator"
#*Start Firefox and check your version again or test the installation by going back to the download link below
#*'''Download and information''': http://www.adobe.com/software/flash/about/
#**Use Firefox to go to the above site to update the Firefox plugin (will also install plugin for most other browsers; except IE)
#**Use IE to go to the above site to update the IE ActiveX
#*'''Download Manual installers'''.
#**http://kb2.adobe.com/cps/191/tn_19166.html#main_ManualInstaller
#**Note separate links for:
#***Plugin for Firefox and most other browsers
#***ActiveX for IE
#'''Update the [[Java]] plugin''' to the latest version.
#*Download site: http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE)
#**'''''Be sure to un-check the Yahoo Toolbar option during the install if you do not want it installed.
#*Also see "Manual Update" in this article to update from the Java Control Panel in Windows Control Panel: http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates
#* Removing old versions (if needed): http://www.java.com/en/download/faq/remove_olderversions.xml
#* Remove multiple Java Console extensions (if needed): http://kb.mozillazine.org/Firefox_:_FAQs_:_Install_Java#Multiple_Java_Console_extensions
#*Java Test: http://www.java.com/en/download/help/testvm.xml

How do I open multiple Firefox home pages? I want all of my different Firefox email accounts open at the same time. I recently upgraded to Win7 and now I have to close and open Firefox to access another email acount!

I want 3 separate, distinct Firefox home pages for each of my 3 email accounts to be open at the same time.

Questions are typically followed by a question mark. My answer answered your question.
Firefox doesn't do email, so there are no "Firefox email accounts". If you are accessing "email" with Firefox, you are using web mail. Some web mail services don't allow for direct access, they want their users to access their email from a "portal" or "main" page and will re-direct any attempt to load an "internal" web site page back to the main page.
As far as loading 3 different web mail accounts at the same time, if they are in the same domain it won't work on Firefox without a Firefox addon. http://br.mozdev.org/multifox/
IOW, if those three email accounts all with Yahoo, without that add-on you would have to logon to each email account separately and log out of the first before logging into the 2nd. Then log out of the 2nd before logging into the 3rd. Firefox isn't capable of having multiple session cookies for simultaneous logon's to the same server. That add-on provides that "multiple sessions cookies" feature.

BAPI_DOCUMENT_CHECKIN2-Status does not allow you to change certain data

Hi Gurus,
I am uploading the DIR attached files for the Documents in PLM. We have a custom program written to upload the attached files. When I tried to upload the file I am getting the BAPI Return error as "Status does not allow you to change certain data". The status of all the documents is "RL"
File format is
Doc type Document No Rev File Name
JPS 0021581PS, X, /in/PLM/JAPAN/Files/0021581PS.xls
Please help me I need to upload the data.
Thanks,
Deepthi

Check the status network for your doc type in config. You may find that the current status may not allow you to make changes. You may need to change the current status to another status before you can make the changes you would like.
The config settings will tell you the status you may set in order to make your changes, if they are allowed.

Document type ZD does not allow you to assign to object MARA

hi ppl,
I have created a Z document type.but its not allowing me to assign in mm02.what might be the problem..? its throwing an error message Document type ZD does not allow you to assign to object MARA.

You need to enable object linking to mara on your new document type. Go to Tcode DC10, select the document type and then go to the object links area. Create a new object link for your document type.

Does cs6 allow you to select ALL frames in a document?

I am doing a wedding book. So I have many image frames on each page.
I want to add a border (stroke) to all these frames. But to my surprise, it appears that the Select All command only selects the frames in the current spread. I did a bit of research here and on the net and it seems that, at least for the previous versions, there is no way to select all frames in a document. This seems very odd to say the least.
Does cs6 allow you to do this now? Or is there a workaround to quickly add a stroke to all frames in a document?
Thank you for any help.
LD

Unfortunately no, but there's a trick you can use. Shapes drawn with the sahpe tool DO accept default settings, so you can use the shape tools instead of the frame tools and place images in them, but that probably doesn't help you at this point.
It actually should be pretty easy to apply an object style to all frames by script -- one or two lines I would think. You can ask over in InDesign Scripting
It might also be possible to use find/change. I just checked, and yes, you can search for the [None] object style and change all, so that may be the best approach.

Devices line in iPhoto does not allow you to sync but it does in iTunes

When I to into Itunes my Ipod shows up and you click on the Devices and you can choose to sync what you want.
However in iPhoto the devices line shows up but the Mac does not allow you to choose to sync i.e. the photos.
Also the sceen it jumps into seems to only deal with importing photos---this is different that before.
Can anyone help with this?

- What version of iPhoto.
- What version of the Operating System.
- Details. What were you doing when the problem arose?
- Did it ever work properly?
- Are there error messages?
- What steps have you tried already to solve the issue.
Anything else you can think of that might allow someone else to understand your issue.
Frankly, I've read your post several times and I don't really understand what it is you are asking.

With 10.7.2 update iCal does not allow you to set "Reminders" by draging events from "All Day Events" into "Reminders" is there another way to do this instead of having to type out the entire reminder with date, time, and type?

With 10.7.2 update iCal does not allow you to set "Reminders" by draging events from "All Day Events" into "Reminders" is there another way to do this instead of having to type out the entire reminder with date, time, and type?
With Lion 10.7.1. you where able to drag events from "All Day Events" into the "Reminders" bar to create upcoming reminders.

Exactly the same question I was about to post!
Great being able to sync reminders (well overdue) however if I have to re-type a calener envent into reminders it's a waste of time!!
Come on Apple!!
Just need an option for the calender event to add to reminder or the old drag to add to reminder functionality back, Please???

"Your organization's policy does not allow you to share with this recipient." When trying to share calendar within our Org

Hi,
Wondering if this is a bug - we have serveral different accepted domains, and our users within our org might have different primary SMTP domains - some @nwtraders.com and some @contoso.com - as examples.
We had a user today report an issue where they were trying to use the 'share calendar' button in Outlook 2010 and then typed in the SMTP address of someone in our org in the field of whom to share with, but that address had a different SMTP domain
than the user's (but still in our org). When she tried to send the sharing request she received a popup stating:
Calendar sharing is not available with the following entries because of permission settings on your network:
<intended smtp address>: Your organization's policy does not allow you to share with this recipient.
I thought it might be related to freeform typing in the address - if I hand type out the address with a valid SMTP address within the same SMTP domain, and press send it works.
If I use the address picker, and pick the intended sharing recipient (who's has an SMTP domain that is different that the senders), it works fine. It only seems to have an issue when you manually type out the address and it's not in the same SMTP domain
as you....
Could this 'problem' be masked with setting up Sharing policy between all of our authoritative domains?
Thanks

Looks like Microsoft has an answer as to whether this is to be expected: http://support.microsoft.com/kb/983062/en-us In my research into this, the error you are receiving is a common thing people have run into and they are all using the solution MS lists
in their KB article. Hope that helps.
JAUCG - Please remeber to mark replies as helpful if they were or as answered if I provided a solution.

Why does LabVIEW allow me to have 2 controls with same name

Here's a general LabVIEW question:
Why does LabVIEW allow me to have 2 controls with the same name in the same VI? It seems like this only increases the chances of confusion. Especially when someone is just looking at a block diagram (or documentation of a block diagram).
No other programming language that I know of allows this. I realize that uniqueness of name is not as critical in LabVIEW as it is in any text based language. For example, in a text based language, if I had 2 variables called abc and I wrote a statement
abc = 12;
the compiler would not know which abc was being referred to. In LabVIEW, if we had 2 controls called abc, the equivalent of doing an abc=12 is writing to a local variable (which is always linked to one of the controls) and there is no ambiguity. Still, someone looking at the code cannot figure out which abc is linked to unless he does a right click>>Find>>terminal (or a double click).
Even though I have never and never will name 2 controls the same, I think it would be a nice constraint to see enforced by LabVIEW.
Any input from NI engineers on this?
Message Edited by S G on 12-18-2007 03:38 PM
S G
Certified LabVIEW Architect, Certified TestStand Developer, Certified Professional Instructor
Attachments:
Trial1.JPG ‏21 KB

I know when you copy and paste a control or indicator, LabVIEW automatically increments the label. But since you can hide the label, and show or hide the caption, there must be another mechanism that LabVIEW uses to keep track of all the controls. I thought I remember back in the "old days" (ver 6 or 6i) LabVIEW would give you an error if you tried to make two controls with the same name. Perhaps that was LabWindows/CVI.
I don't know where the index is actually stored, but if you look at a property node linked to the Pane, you will see an array of references to the controls and indicators. Since the references are stored in an array, I assume that any local variables are tied to the index of that array. Since the labels themselves are properties of the control, I guess there's no reason to limit what that label is. They all have a unique index number.
Interestingly, this array of references grows from the beginning. That is, any new control or indicator is put at index 0, not the end of the array.
B-)
Message Edited by LabViewGuruWannabe on 12-18-2007 08:45 PM
Attachments:
Labels.png ‏12 KB

Does PayPal allow you to offer subscription payments?

Does PayPal allow you to offer subscription payments? I know
that you can
set *yourself* up to make subscription payments to another
party, but can
you have a "button" allowing site visitors to sign up to make
subscription
payments?
Thanks in advance for any help..
Patty Ayers | www.WebDevBiz.com
Free Articles on the Business of Web Development
Web Design Contract, Estimate Request Form, Estimate
Worksheet

You're welcome!
"P@tty Ayers" <[email protected]>
wrote in message
news:e37luu$68a$[email protected]..
> Thank you, Dan, yes.
>
>
> --
> Patty Ayers | www.WebDevBiz.com
> Free Articles on the Business of Web Development
> Web Design Contract, Estimate Request Form, Estimate
Worksheet
> --
>
> "Dan Galfano" <[email protected]>
wrote in message
> news:e37lkd$5sf$[email protected]..
>> Click on Merchant tools. In the right side of the
page, under Key
>> Features, see Subscriptions and Recurring Payments.
>>
>> Is that what you're looking for?
>>
>> Dan
>>
>>
>> "P@tty Ayers"
<[email protected]> wrote in message
>> news:e37lbm$5di$[email protected]..
>>> Any assistance finding this on the site? I've
been at it for about half
>>> an hour.
>>>
>>>
>>> --
>>> Patty Ayers | www.WebDevBiz.com
>>> Free Articles on the Business of Web Development
>>> Web Design Contract, Estimate Request Form,
Estimate Worksheet
>>> --
>>>
>>>
>>>
>>> "Dan Galfano"
<[email protected]> wrote in message
>>> news:e37l67$582$[email protected]..
>>>> Yes you can.
>>>>
>>>>
>>>> "P@tty Ayers"
<[email protected]> wrote in message
>>>> news:e37l4p$56e$[email protected]..
>>>>> Does PayPal allow you to offer
subscription payments? I know that you
>>>>> can set *yourself* up to make
subscription payments to another party,
>>>>> but can you have a "button" allowing
site visitors to sign up to make
>>>>> subscription payments?
>>>>>
>>>>> Thanks in advance for any help..
>>>>>
>>>>> --
>>>>> Patty Ayers | www.WebDevBiz.com
>>>>> Free Articles on the Business of Web
Development
>>>>> Web Design Contract, Estimate Request
Form, Estimate Worksheet
>>>>> --
>>>>>
>>>>>
>>>>
>>>>
>>>
>>>
>>
>>
>
>

Does dreamweaver allow you to draw?

Does dreamweaver allow you to draw? I am trying to customize
my site by adding lines, ellipses, rectangles, circles...etc. If
dreamweaver does have this...could somebody tell me how to access
the drawing menu?
Thanks.

You might also add PhotoshOp to your list....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Katsuey" <[email protected]> wrote in
message
news:fo2uch$srj$[email protected]..
>> Does dreamweaver allow you to draw? I am trying to
customize my site by
>> adding
>> lines, ellipses, rectangles, circles...etc. If
dreamweaver does have
>> this...could somebody tell me how to access the
drawing menu? Thanks.
>
> No. DW is not a graphics tool if that's what you are
asking.
> Fireworks or Photoship are the graphics programs most
> use with DW.
>

When you delete an app from your homescreen it is still in the cloud, does that mean you still have the app, and how do you get it back on to the home screen

When you delete an app from your homescreen it is still in the cloud, does that mean you still have the app, and how do you get it back on to the home screen. new to ipad so do not know much. Anybody know.p

As long as the app remains in the store then you can re-download it via the Purchased tab in the App Store app, or via the Purchased Link under Quick Links on the right-hand side of the iTunes store home page on your computer's iTunes : re-downloading.
Similarly ibooks can be re-downloaded, and depending upon what country that you are in then music, films and tv shows may also be re-downloadable (if they remain available in the store).

Does firefox allow you to have a firefox email account?

Similar Messages

Maybe you are looking for