Does "first match" win on Content Filters?

If I define multiple content filters for a given outbound mail policy, would system stop looking at filters once a match is found on one of the content filters or should I force that by using a "final" action in my content filters?
I know "first match wins" apply to some other scenarios, but couldn't see a clear explanation to above question in section 6 of Config guide where content filters are defined (and testing with system did not clear that for me either).
Thanks.
Sent from Cisco Technical Support iPhone App

Hello John,
An emaill being processed by the content filters or messages filters will continue down the list of  content/message filters until it hits the last filter or a 'final' action filter command.   If the email being processed needs to exit (by administrative choice), the filter it hits, should have a final action.  This only applies to certain conditions, where the administrator does not want the filter's last action to be overwritten by another filter down the pipeline.
cheers,
-Alvaro

Similar Messages

  • Does the ASA5525-K9 support Content filtering?

    Hi,
    I know the 5510 & 5520s support the CSC-SSM module for Content Filtering (Anti-Phishing, Anti Spam, URL filtering,
    Anti-Spyware & Antivirus), but what about content filtering for the ASA5525-K9.
    The problem that I have is that I need a firewall that supports up to 1 Gbps Maximum Firewall Throughput and to support 250 users with Content Filtering described above.
    I'm using the following doc for sizing and came across the ASA5525-K9 for 1 Gbps, but not sure about the Content filtering:
    http://www.cisco.com/en/US/partner/products/ps6120/prod_models_comparison.html#~tab-b
    Thanks,
    CR

    No, the new X series ASA does not support Content Filtering CSC module.
    Here is what is supported on the new ASA5525-X for your reference:
    http://www.cisco.com/en/US/prod/collateral/vpndevc/ps6032/ps6094/ps6120/data_sheet_c78-701808.html

  • Sharepoint error - Search Issue - The content type text/html; charset=utf-8 of the response message does not match the content type of the binding (application/soap+msbin1).

    i see this error everywhere - In ULS logs, on site. On the site > Site settings > search keywords; I see this - 
    The content type text/html; charset=utf-8 of the response message does not match the content type of the binding (application/soap+msbin1). If using a custom encoder, be sure that the IsContentTypeSupported method is implemented properly. The first 1024 bytes of the response were: '<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>IIS 7.0 Detailed Error - 500.19 - Internal Server Error</title> <style type="text/css"> <!-- body{margin:0;font-size:.7em;font-family:Verdana,Arial,Helvetica,sans-serif;background:#CBE1EF;} code{margin:0;color:#006600;font-size:1.1em;font-weight:bold;} .config_source code{font-size:.8em;color:#000000;} pre{margin:0;font-size:1.4em;word-wrap:break-word;} ul,ol{margin:10px 0 10px 40px;} ul.first,ol.first{margin-top:5px;} fieldset{padding:0 15px 10px 15px;} .summary-container fieldset{padding-bottom:5px;margin-top:4px;} legend.no-expand-all{padding:2px 15px 4px 10px;margin:0 0 0 -12px;} legend{color:#333333;padding:4px 15px 4px 10px;margin:4px 0 8px -12px;_margin-top:0px; border-top:1px solid #EDEDED;border-left:1px solid #EDEDED;border-right:1px solid #969696; border-bottom:1px solid #969696;background:#E7ECF0;font-weight:bold;'.
    I am facing issues in searching, my managed metadata service is not running, search results page throws internal error. Any Idea why this above error comes.
    P.S: We use windows authentication in our environment.

    Hi IMSunny,
    It seems you have solved this issue based on your another post.
    http://social.technet.microsoft.com/Forums/en-US/aa468ab0-1242-4ba8-97ea-1a3eb0c525c0/search-results-page-throws-internal-server-error?forum=sharepointgeneralprevious
    Thanks
    Daniel Yang
    TechNet Community Support

  • Error consuming Web service - content type text/xml;charset=utf-8 of the response message does not match the content type of the binding

    Hi all,
    We are trying to interact with Documentum server through DFS exposed WCF which communicates through port 9443 and we are provided with documentum issued Public Key certificates. We have successfully imported the certificates in client machine and configured
    the bindings as below in our .Net web application config file.
    <system.serviceModel>
    <bindings>
    <wsHttpBinding>       
    <binding
    name="ObjectServicePortBinding1">
    <security
    mode="Transport">
    <transport
    clientCredentialType="None"
    proxyCredentialType="None"
    realm=""
    />
    <message
    clientCredentialType="Certificate"
    algorithmSuite="Default"
    />
    </security>
    </binding>
    <binding
    name="QueryServicePortBinding">
    <security
    mode="Transport">
    <transport
    clientCredentialType="None"
    proxyCredentialType="None"
    realm=""
    />
    <message
    clientCredentialType="Certificate"
    algorithmSuite="Default"
    />
    </security>
    </binding>
    </wsHttpBinding>
    </bindings>
    Also, we set the message encoding as MTOM and the wcf client object initialization code snippet is as below,
    ObjectServicePortClient
    serviceClient = new
    ObjectServicePortClient(new
    WSHttpBinding("ObjectServicePortBinding1"),
    new
    EndpointAddress(UriUtil.ObjectServiceUri));
    if (serviceClient.Endpoint.Binding
    is
    WSHttpBinding)
       WSHttpBinding
    wsBinding = serviceClient.Endpoint.Binding as
    WSHttpBinding;
    wsBinding.MessageEncoding =
    "MTOM".Equals(transferMode) ?
    WSMessageEncoding.Mtom :
    WSMessageEncoding.Text;
    serviceClient.Endpoint.Behaviors.Add(new
    ServiceContextBehavior(Config.RepositoryName,
    Config.DocumentumUserName,
    Config.DocumentumPassword));
    When we execute the above code, we are getting error message as below,
    Exception: The content type text/xml;charset=utf-8 of the response message does not match the content type of the binding (multipart/related; type="application/xop+xml"). If using a custom encoder, be sure that the IsContentTypeSupported
    method is implemented properly. The first 407 bytes of the response were: '<?xml version="1.0" ?><S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/"><S:Body><S:Fault xmlns:ns4="http://www.w3.org/2003/05/soap-envelope"><faultcode>S:VersionMismatch</faultcode><faultstring>Couldn't
    create SOAP message. Expecting Envelope in namespace http://schemas.xmlsoap.org/soap/envelope/, but got http://www.w3.org/2003/05/soap-envelope </faultstring></S:Fault></S:Body></S:Envelope>'
    Then, we changed the bindings as below
    <system.serviceModel>
    <bindings>
    <wsHttpBinding>       
    <binding
    name="ObjectServicePortBinding1">
    <security
    mode="Transport">
    <transport
    clientCredentialType="Certificate"
    proxyCredentialType="None"
    realm=""
    />
    <message
    clientCredentialType="Certificate"
    algorithmSuite="Default"
    />
    </security>
    </binding>
    <binding
    name="QueryServicePortBinding">
    <security
    mode="Transport">
    <transport
    clientCredentialType="
    Certificate"
    proxyCredentialType="None"
    realm=""
    />
    <message
    clientCredentialType="Certificate"
    algorithmSuite="Default"
    />
    </security>
    </binding>
    </wsHttpBinding>
    </bindings>
    We are getting another error message,
    Exception: The client certificate is not provided. Specify a client certificate in ClientCredentials.
    Any pointers on resolving this issue would be highly helpful.
    Thanks

    Hi Dhanasegaran,
      As per your case, the corresponding details which may guide you to resolve this issue:
    1. First of all, you can try to call the wcf service directly from the browser & check where it will point out the correct location.
    2. In config file ,Set IncludeExceptionDetailInFaults to true to enable exception information to flow to clients for debugging purposes .
    Set this to true only during development to troubleshoot a service like below :
    <serviceBehaviors>
      <behavior name="metadataAndDebugEnabled">
        <serviceDebug
          includeExceptionDetailInFaults="true"   
    />
        <serviceMetadata
          httpGetEnabled="true"
          httpGetUrl=""   
    />
      </behavior>
    </serviceBehaviors>
    3. I suggest you to change that <security mode ="TransportWithMessageCredential"> instead of <security mode ="Transport">
     for more information, refer the following link :
    https://msdn.microsoft.com/en-us/library/aa354508(v=vs.110).aspx

  • WCF returning "The content type text/html of the response message does not match the content type of the binding (application/soap+xml; charset=utf-8)"

    I have a WCF service I am trying to run on a new installation of 64-bit Windows Server 2008 IIS. Although it runs fine on Windows 2003 IIS, it is throwing the error in the thread title, which appears to be a server config issue, but I am not sure. Googling and searching the MSDN forums did not turn up a solution. I tried running WCF Logging, but that didn't help either.
    Does anyone have any suggestions on how to solve this probelm?
    Here is the error:
    The content type text/html of the response message does not match the content type of the binding (application/soap+xml; charset=utf-8). If using a custom encoder, be sure that the IsContentTypeSupported method is implemented properly. The first 1024 bytes of the response were: '<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
    <html xmlns="http://www.w3.org/1999/xhtml">
    <head>
    <meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1"/>
    <title>500 - Internal server error.</title>
    <style type="text/css">

    I have the same issue on Windows 7 machine. The service works fine using a SoapUI client but a .Net client faisl to get a response.
    Hi,
    I have a WCF service which works perfectly when using SoapUI but throws error in my .Net client.
    {"The content type text/html; charset=UTF-8 of the response message does not match the content type of the binding (text/xml; charset=utf-8). If using a custom encoder, be sure that the IsContentTypeSupported method is implemented properly. The first
    1024 bytes of the response were: '<HTML><HEAD><link rel=\"alternate\" type=\"text/xml\" href=\"http://xyz.mysite.com/ysa/Broker.svc?disco\"/><STYLE type=\"text/css\">#content{ FONT-SIZE: 0.7em;
    PADDING-BOTTOM: 2em; MARGIN-LEFT: 30px}BODY{MARGIN-TOP: 0px; MARGIN-LEFT: 0px; COLOR: #000000; FONT-FAMILY: Verdana; BACKGROUND-COLOR: white}P{MARGIN-TOP: 0px; MARGIN-BOTTOM: 12px; COLOR: #000000; FONT-FAMILY: Verdana}PRE{BORDER-RIGHT: #f0f0e0 1px solid; PADDING-RIGHT:
    5px; BORDER-TOP: #f0f0e0 1px solid; MARGIN-TOP: -5px; PADDING-LEFT: 5px; FONT-SIZE: 1.2em; PADDING-BOTTOM: 5px; BORDER-LEFT: #f0f0e0 1px solid; PADDING-TOP: 5px; BORDER-BOTTOM: #f0f0e0 1px solid; FONT-FAMILY: Courier New; BACKGROUND-COLOR: #e5e5cc}.heading1{MARGIN-TOP:
    0px; PADDING-LEFT: 15px; FONT-WEIGHT: normal; FONT-SIZE: 26px; MARGIN-BOTTOM: 0px; PADDING-BOTTOM: 3px; MARGIN-LEFT: -30px; WIDTH: 100%; COLOR: #ffffff; PADDING-TOP: 10px; FONT-FAMILY: Tahoma; BACKGROUND-COLOR: #003366}.intro{MARGIN-LEFT: -15px}</STYLE><TITLE>Broker
    Service</TITLE></HEAD><BODY><DIV id=\"content\"><P class=\"head'."}
    I have the same service hosted on my local machine and when I point to the local service I can execute the operation with no issues. The message encoding is Soap11. I tried changing to Soap12 but I get exact same error. Any ideas greatly appreciated.
    I do have windows Activation Features installed and I am using .Net Framework 4.
    Thanks
    Sofia Khatoon

  • The content type of the response message does not match the content type of the binding

    I have written an ASP.Net web service which returns english,chinese and portuguese data. Everything seemed working fine until the method retunred only english data. The moment it returns english, chinese and portuguese data I get the error:
    The content type text/html; charset=utf-8 of the response message does not match the content type of the binding (text/xml; charset=utf-8). If using
    a custom encoder, be sure that the IsContentTypeSupported method is implemented properly. The first 1024 bytes of the response were: 
    '<!DOCTYPE html> <html>     <head>         <title>Runtime Error</title>
            <meta name="viewport" content="width=device-width" />         <style>          body {font-family:"Verdana";font-weight:normal;font-size:
    .7em;color:black;}           p {font-family:"Verdana";font-weight:normal;color:black;margin- -5px}          b {font-family:"Verdana";font-weight:bold;color:black;margin-
             H1 { font-family:"Verdana";font-weight:normal;font-size:18pt;color:red }          H2 { font-family:"Verdana";font-weight:normal;font-size:14pt;color:maroon
    }          pre {font-family:"Consolas","Lucida Console",Monospace;font-size:11pt;margin:0;padding:0.5em;line-height:14pt}          .marker {font-weight:
    bold; color: black;text-decoration: none;}          .version {color: gray;}          .error {margin-bottom: 10px;}          .expandable
    { text-decoration:underline; font-weight:bold; color:navy; cursor:hand; }          @media screen and (max-width: 639px) {           pre { width: 440px; o'.
    It is not written using WCF ... any workarounds?!
    Thank you.

    Hi Raj Krish,
    For ASP.NET related issue, please post to the following forum:
    http://forums.asp.net/
    Regards,
    Barry
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • When I first bought it, it was meant to use all the services provided by Great Apple including the new LTE service as a main service for such device. Now I just realize that such service does not match with the model I have ... Pease advise ..

    Greetings,
    I hope this email finds you well. I bought my iPhone on December 1st, 2012 with a track order W459517623. When I first bought it, it was meant to use all the services provided by Great Apple including the new LTE service as a main service for such device. Now I just realize that such service does not match with the model I have, as per this link:
    http://www.apple.com/iphone/LTE/
    Model A1429
    (GSM model)
                                                                  Saudi Arabia - Mobily
    The model Apple sent is A1428
    I believe that such service should be provided to my devices too. Also, Apple always find best ways to solve such queries. 
    Please advise me
    Thank you and Regards,
    Abdulrahman

    I'm assuming you bought it via the Apple Online store. Contact them. Use the Contact Us link at the bottom of the page. Did you buy the phone from the store in the country you intend to USE the iPhone? If you bought the phone in the US store and intend to use it OUTSIDE the US, you only have yourself to blame, as they shipped the CORRECT phone for use in the US.

  • Planning Quick Win Error: Registration file does not match the app version.

    Gents,
    I have a Fusion 11.1.2 install on a Windows 2003 server environment.
    After creating the Planning App in Classic mode, I logged back in to Initialize the App... and I got this.
    This occurred when I tried to log on to the Planning App in Workspace. (I was about to go Create/Refresh the app) :
    "An error occurred while processing this page. Check the log for details.Please close the current tab and open application again. Single Sign on Validation failed"
    The SharedServices_Security.log goes as follows:
    2009-05-12 16:08:11,437 ERROR [http-28080-Processor3] com.hyperion.css.common.CSSUtils.checkValidArgument(Unknown Source) -- 26:1002:Invalid value for identity. Enter a valid value.
    2009-05-12 16:08:11,468 WARN [http-28080-Processor3] com.hyperion.css.spi.impl.nv.NativeProvider.getHierarchicalRoleTree(Unknown Source) -- Exception getting Child Roles in hierarchy [Root Cause: 26:1002:Invalid value for identity. Enter a valid value. ]
    2008-05-12 16:42:47,781 WARN [http-28080-Processor9] com.hyperion.css.spi.impl.nv.XMLRoleRegDocumentModel.recurseDocumentTree(Unknown Source) -- The Product 'Hyperion Planning' Version 'HP-9.5.0' in the Registration file does not match the application version '9.5.0'
    Any suggestions?
    Thanks.
    Eric.

    Hi,
    If you are running on a Microsoft OS, have a look the log :- :\Hyperion\logs\services\HyS9Planning-sysout.log
    Not sure how much information it will give though.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Ironport content filters w/headers

    Hi
    If I have a content filter acting on incoming mail which adds or edits a header, does this immediately affect the header, ie. can I immediately afterwards have an incoming filter which uses the header as a condition?
    John

    Hey John,
    If you're using content filters where content filter #1 on the list adds/edits header
    This takes action first
    Then if you have a second content filter which looks for this added or edited header, then it'll take action if the header matches the condition of the filter.
    However if your content filter #1 is taking action on a header that should be available but not yet added due to the ordering, you just need to reorder your filters.
    Regards,
    Matthew

  • Help! Order of photos in a Folder does not match order of albums

    I have seen dozens of threads on folders and albums, sorting them etc. However did not quite find an answer to this one.
    The question is : Why the order of photos in a Folder does not match with the order of Albums I have created underneath the Folder?
    In other words I created a floder and placed within the folder a few albums we will call G, K, C ...etc in the chronological order in which I want to show the pictures. The pictures within the album are not strictly chronological. ( I will explain more if this is an issue)
    Next when I click on the Folder, I notice that the photos are grouped by the corresponding Album which is what they should be, however their(photos) order did not correspond to that of the Albums. In other words, in the Folder view, I see photos of K first and then may be G and then may be C. I am not able to change that order to G, K, C..the way I want. This will mess up the slideshow for me.
    For clarity, I created each album simply by dragging corresponding event down into the Folder. The events are sorted by date and ascending in View>Sort Events.
    I appreciate any suggestions please!
    Thanks

    Try the following:
    1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
         User/Home/Library/ Preferences folder.
    2 - delete iPhoto's cache file, Cache.db, that is located in your
    User/Home/Library/Caches/com.apple.iPhoto folder (Snow Leopard and Earlier).
    or with Lion, Mt. Lion or Mavericks delete the contents the User/Library/Containers/com.apple.iPhoto/
    Data/Library/Caches/com.apple.iPhoto folder.
    3 - reboot, launch iPhoto, reset its preferences and try the slideshow again.
    NOTE: In Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and press the Return key - 10.7: Un-hide the User Library folder.
    If you're running Mavericks, 10.9,  go to your Home folder and use the View ➙ Show View Options menu to bring the this window:
    where you can check the Show Library Folder checkbox.
    OT

  • Object does not match target type when raising an event from c# to VB6

    I have a c# .net DLL that I use from a VB6 app. It exposes an event,
    and the VB6 app is sinking it.
    The VB6 app is receiving the event, as long as it is raised from the
    main thread of the .net DLL.
    I have an aync task being handled inside the DLL (delegate BeginInvoke). Any
    attempt to raise the event from within that thread casuses the reported
    error, even from within the AsyncCallback function, when the thread is ending.
    I noticed that the delegate for the event is not declared inside the
    interface. It's in that module, but above the interface definition:
        [ComVisible(false)]
        public delegate void LoggingEventHandler( string logData );
    The event is declared in the class itself as:
        public class Processor : _Processor
            public event LoggingEventHandler        LogNotification;
    Finally, to raise the event:
    if ( this.Completed != null )
        this.Completed( true );
    If I open the tlb with OLEVIEW, I can see the public event just fine. Of course, I expected to, as it's working up until the helper thread kicks in.
    Now for the REAL WIERD PART! This DOES work on several servers that have
    been in production for months. It's just this one server that it won't work
    on. Same code. Resinstalled/registered it 1,000 times. It took me a while to
    find that an error was even occuring, since it was being raised in the
    seperate thread. In other words, I'm receiving the event just fine on a series of servers. This is a new machine we're trying to bring online. I suspect it's environmental, but I can't figure it out.
    I don't understand why the publisher would be expecting a certain type of
    subscriber in the first place... unless the error is really triggered by the client when the event reaches it. I've put logging into the client, though, and the first line of code inside the event is not being executed.
    For the VB6 app, I reference the tlb file that is automatically created when
    I compile (Interop is checked). I unregistered and re-registered the tlb on
    the server. I regasm'd the dll itself. All dlls are in the same folder - not
    in the GAC.
    The stack trace is as follows:
       at System.RuntimeType.InvokeDispMethod(String name, BindingFlags
    invokeAttr, Object target, Object[] args, Boolean[] byrefModifiers, Int32
    culture, String[] namedParameters)
       at System.RuntimeType.InvokeMember(String name, BindingFlags invokeAttr,
    Binder binder, Object target, Object[] args, ParameterModifier[] modifiers,
    CultureInfo culture, String[] namedParameters)
       at System.RuntimeType.ForwardCallToInvokeMember(String memberName,
    BindingFlags flags, Object target, Int32[] aWrapperTypes, MessageData&
    msgData)
       at HPFS.Queue.IProcessorEvents.LogNotification(String logData))

    This is driving me nuts!
    I sure would appreciate any suggestions.
    I got this working on one of the two machines. The other machine had some other issues, so I had it re-imaged. It's been so long since I fixed the first one, that I can't remember exactly how I did it. Plus, I did so many things to it over two weeks, that I never really felt confident, anyway. But ... I could *swear* that the last thing I did back then to get this event to flow was to re-register the DLL's TLB.
    So ... This is win 2k with FW 1.1 + SP1.
    Completed is the delagate I'm trying to invoke.
    this.Completed.Target.GetType().Name = "__comobject"
    I've tried everything. Unregistered the .tlb. Unregistered the .net DLL. Verified that the app completely failed while unregistered. Created the TLB using RegAsm /tlb syntax.
    I tried using CLR SPY. It registers nothing. It only lets me pick an EXE. This is a DLL tring to raise to an EXE.
    I've looked at the TLB in OLE VIEW and I just don't know what I'm looking at.
    Is there any other tool or technique I can use to audit/monitor/trap this? .net is giving me *** for details about what's failing. I wish I could somehow debug into exactly what it's trying to do and get more details on the failure.
    Here's the error I'm getting:
    (Code -1) Object does not match target type.<Source:mscorlib>(Stack:    at System.RuntimeType.InvokeDispMethod(String name, BindingFlags invokeAttr, Object target, Object[] args, Boolean[] byrefModifiers, Int32 culture, String[] namedParameters)
       at System.RuntimeType.InvokeMember(String name, BindingFlags invokeAttr, Binder binder, Object target, Object[] args, ParameterModifier[] modifiers, CultureInfo culture, String[] namedParameters)
       at System.RuntimeType.ForwardCallToInvokeMember(String memberName, BindingFlags flags, Object target, Int32[] aWrapperTypes, MessageData& msgData)
       at HPFS.Queue.IProcessorEvents.Completed(Boolean success)
       at HPFS.Queue.Processor.RequestDone())
    Processor = the DLL I'm trying to raise the event from.
    IProcessor = the event interface that's exposed through COM.

  • Issue with only one client - The client version 5.00.7958.1000 does not match the MP version 5.00.7711.0000. The client will not be installed.

    Below issue is with only one client in that untrusted domain. So boundary is not the issue.
    Env -
    mydom.com has SCCM PRI site (MP, DP as well).
    Client is in untrusted forest.
    Please help.
    Thanks
    MP 'mysccm.mydom.com' is compatible ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Retrieved 1 MP records from AD for site 'pri' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Retrived site version '5.00.7958.1000' from AD for site 'pri' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    SiteCode:         pri ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    SiteVersion:      5.00.7958.1000 ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Ccmsetup is being restarted due to an administrative action. Installation files will be reset and downloaded again. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Deleted file C:\Windows\ccmsetup\client.msi ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Only one MP mysccm.mydom.com is specified. Use it. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Searching for DP locations from MP(s)... ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Current AD site of machine is Default-First-Site-Name LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Local Machine is joined to an AD domain LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Current AD forest name is staging.local, domain name is staging.local LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
    DhcpGetOriginalSubnetMask entry point is supported. LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Begin checking Alternate Network Configuration LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Finished checking Alternate Network Configuration LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Sending message body '<ContentLocationRequest SchemaVersion="1.00">
      <AssignedSite SiteCode="pri"/>
      <ClientPackage/>
      <ClientLocationInfo LocationType="SMSPACKAGE" DistributeOnDemand="0" UseProtected="0" AllowCaching="0" BranchDPFlags="0" AllowHTTP="1" AllowSMB="0" AllowMulticast="0"
    UseInternetDP="0">
        <ADSite Name="Default-First-Site-Name"/>
        <Forest Name="staging.local"/>
        <Domain Name="staging.local"/>
        <IPAddresses>
    <IPAddress SubnetAddress="10.72.117.0" Address="10.72.117.134"/>
    <IPAddress SubnetAddress="10.72.117.0" Address="10.72.117.142"/>
        </IPAddresses>
      </ClientLocationInfo>
    </ContentLocationRequest>
    ' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Sending message header '<Msg SchemaVersion="1.1"><ID>{5B972249-B931-4739-9EFA-A9FDE29C351A}</ID><SourceHost>STAGINGSRVR07</SourceHost><TargetAddress>mp:[http]MP_LocationManager</TargetAddress><ReplyTo>direct:STAGINGSRVR07:LS_ReplyLocations</ReplyTo><Priority>3</Priority><Timeout>600</Timeout><ReqVersion>5931</ReqVersion><TargetHost>mysccm.mydom.com</TargetHost><TargetEndpoint>MP_LocationManager</TargetEndpoint><ReplyMode>Sync</ReplyMode><Protocol>http</Protocol><SentTime>2014-11-04T17:14:55Z</SentTime><Body
    Type="ByteRange" Offset="0" Length="1264"/><Hooks><Hook3 Name="zlib-compress"/></Hooks><Payload Type="inline"/></Msg>' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    CCM_POST 'HTTP://mysccm.mydom.com/ccm_system/request' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Content boundary is '--aAbBcCdDv1234567890VxXyYzZ' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Received header '<Msg SchemaVersion="1.1">
     <ID>{D4EF0A4D-A000-4697-9AFA-B1317B09931D}</ID>
     <SourceID>GUID:21298681-5080-4365-B614-F0C8DF67452B</SourceID>
     <SourceHost>pri1SCCM02</SourceHost>
     <TargetAddress>direct:STAGINGSRVR07:LS_ReplyLocations</TargetAddress>
     <ReplyTo>MP_LocationManager</ReplyTo>
     <CorrelationID>{00000000-0000-0000-0000-000000000000}</CorrelationID>
     <Priority>3</Priority>
     <Timeout>600</Timeout>
     <TargetHost>STAGINGSRVR07</TargetHost><TargetEndpoint>LS_ReplyLocations</TargetEndpoint><ReplyMode>Sync</ReplyMode><Protocol>http</Protocol><SentTime>2014-11-04T17:14:55Z</SentTime><Body Type="ByteRange"
    Offset="0" Length="2408"/><Hooks><Hook3 Name="zlib-compress"/><Hook Name="authenticate"><Property Name="Signature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roperty><Property
    Name="AuthSenderMachine">pri1SCCM02;mysccm.mydom.com;</Property><Property Name="MPSiteCode">pri</Property></Hook></Hooks><Payload Type="inline"/></Msg>' ccmsetup 11/4/2014 12:14:55
    PM 4816 (0x12D0)
    Received reply body '<ContentLocationReply SchemaVersion="1.00"><ContentInfo PackageFlags="16777216"><ContentHashValues/></ContentInfo><Sites><Site><MPSite SiteCode="pri" MasterSiteCode="pri"
    SiteLocality="LOCAL" IISPreferedPort="80" IISSSLPreferedPort="443"/><LocationRecords><LocationRecord><URL Name="http://mysccm.mydom.com/SMS_DP_SMSPKG$/pri00002"
    Signature="<ADSite">http://mysccm.mydom.com/SMS_DP_SMSSIG$/pri00002"/><ADSite Name="CSSG-Mount-Laurel"/><IPSubnets><IPSubnet Address="10.72.117.0"/><IPSubnet
    Address=""/></IPSubnets><Metric Value=""/><Version>7958</Version><Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities><ServerRemoteName>mysccm.mydom.com</ServerRemoteName><DPType>SERVER</DPType><Windows
    Trust="0"/><Locality>LOCAL</Locality></LocationRecord></LocationRecords></Site></Sites><ClientPackage FullPackageID="pri00002" FullPackageVersion="2" FullPackageHash="03CFD97C8FB5F7E7E9F177FD6D30D6F25ED106E517E69B715695A0E81DB1D9AF"
    MinimumClientVersion="5.00.7958.1000" RandomizeMaxDays="7" ProgramEnabled="false" LastModifiedTime="30388855;1262113920" SiteVersionMatch="true" SiteVersion="5.00.7958.1000" EnablePeerCache="true"/><RelatedContentIDs/></ContentLocationReply>'
    ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Found local location 'http://mysccm.mydom.com/SMS_DP_SMSPKG$/pri00002' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Discovered 1 local DP locations. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    PROPFIND 'http://mysccm.mydom.com/SMS_DP_SMSPKG$/pri00002' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Got 401 challenge Retrying with Windows Auth... ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    PROPFIND 'http://mysccm.mydom.com/SMS_DP_SMSPKG$/pri00002' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Failed to correctly receive a WEBDAV HTTP request.. (StatusCode at WinHttpQueryHeaders: 401) ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Failed to check url http://mysccm.mydom.com/SMS_DP_SMSPKG$/pri00002. Error 0x80004005 ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Enumerated all 1 local DP locations but none of them is good. Fallback to MP. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    GET 'HTTP://mysccm.mydom.com/CCM_Client/ccmsetup.cab' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    C:\Windows\ccmsetup\ccmsetup.cab is Microsoft trusted. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Successfully extracted manifest file C:\Windows\ccmsetup\ccmsetup.xml from file C:\Windows\ccmsetup\ccmsetup.cab. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Loading manifest file: C:\Windows\ccmsetup\ccmsetup.xml ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Successfully loaded ccmsetup manifest file. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Checking if manifest version '5.00.7958.1000' is newer than the ccmsetup version '5.0.7958.1000' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Running from temp downloaded folder or manifest is not newer than ccmsetup. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Adding file 'HTTP://mysccm.mydom.com:80/CCM_Client/x64/client.msi' to BITS job, saving as 'C:\Windows\ccmsetup\client.msi'. ccmsetup 11/4/2014 12:14:56 PM 4816 (0x12D0)
    Starting BITS download for client deployment files. ccmsetup 11/4/2014 12:14:56 PM 4816 (0x12D0)
    Successfully completed BITS download for client deployment files. ccmsetup 11/4/2014 12:14:57 PM 4816 (0x12D0)
    Successfully downloaded client files via BITS. ccmsetup 11/4/2014 12:14:57 PM 4816 (0x12D0)
    Validated file 'C:\Windows\ccmsetup\client.msi' hash 'A5732CE24F2B1545E9FBA458971E0A5504093E0F743CA9E8BD9C047582902878' ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
    Retrieved client version '5.00.7958.1000' and minimum assignable site version '5.00.7845.1000' from client package ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
    Checking compatibility of site version '5.00.7958.1000', expect newer than '5.00.7845.1000' ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
    Site version '5.00.7958.1000' is compatible. Client deployment will continue. ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
    An MP exists on this machine. ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
    The client version 5.00.7958.1000 does not match the MP version 5.00.7711.0000.  The client will not be installed. ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
    A Fallback Status Point has not been specified.  Message with STATEID='318' will not be sent. ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
    InstallFromManifest failed 0x80004005 ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
    CcmSetup failed with error code 0x80004005 ccmsetup 11/4/2014 12:14:58 PM 3680 (0x0E60)

    Why two primary that is 'coz geographically based server support and workstation. You can think it as a data center to data center split.
    That doesn't make sense and aren't valid reasons for 2012 (not that you can necessarily change it now).
    This line jumps out at me in the log file though: "An MP exists on this machine".
    That looks like the system you are installing on previously had an MP on it. I would delete the ccm namespace in WMI, cleanup all reference to ccm and Configuratin Manager from the registry, and then try again.
    Jason | http://blog.configmgrftw.com | @jasonsandys

  • How to avoid output file and error lines when condition does not match

    Hi Experts
    A customer want to send purchase order files to several vendors and each vendor has their own requirement to content and file format. I have prepared scenarios for each vendor and a template is (conditionally) called when CardCode matches. It works fine, - PO file is generated when CardCode matches, but error lines are written to SAP B1 Control Center each time CardCode does not match the one defined in a scenario (100 or more times per day). Problem is that these error lines does not get automatic deleted. Conditional processing are made in this way:
    Result Message in SAP B1 Control Center when CardCode does not match:
    I tried to avoid an error line in SAP B1 Control Center when CardCode does not match in this way:
    Then no error lines are written to SAP B1 Control Center, but an output file is generated each time (order file when CardCode matches and an empty file when CardCode does not match).
    Any suggestions on how to avoid both errors types (error lines in SAP B1 Control Center and empty output files)?
    Or - can lines in SAP B1 Control Center be automatic deleted?
    Regards
    Steen

    Hi Steen,
    using <b1im_skip> should be the right approach, if you're working with B1 OUTBOUND.
    Following extract form the B1i help describes the usage to skip the outbound processing:
    1.1 Skipping Outbound Processing
    If you do not want to hand over the message to the receiver system, the scenario step can create a special tag that indicates to generic processing in the integration framework to skip the message processing.
    Add the following to the final transformation atom (atom0):
    <b1im_skip xmlns= ”” info=”my info” msglog=”true” msgout="yes">
    If the integration framework skips the message, it puts the message log information to the Filtered section, if the message log is switched on. The result message contains the Message skipped by vBIU logic information.
    info
    To display an individual message, define it using the info attribute.
    msglog
    If you want to avoid an entry in the message log, introduce the msglog attribute and set it to false.
    msgout
    To display the skip information in the Success section of the message log, use the msgout attribute and set it to yes.
    In case you don't want any MsgLogEntry in case of a skipped message, please enter the following in final atom0:
    <xsl:template name="transform">
    <xsl:attribute name="pltype">xml</xsl:attribute>
    <xsl:choose>
    <xsl:when test="$msg/BOM/BO/Documents/row/CardCode=&apos;C20000&apos;">
    <xsl:call-template name="transform2"/>
    </xsl:when>
    <xsl:otherwise>
    <b1im_skip info="skipped" msglog="false"/>
    </xsl:otherwise>
    </xsl:choose>
    </xsl:template>
    Best regards
    Bastian

  • ORA-01504: database name 'DEV1' does not match parameter db_name 'PROD1'

    Hi, All -
    This is my first time cloning a database. The recovery finished but gave me the following error message. All the parameters in the pfile are set to "DEV1". I believe that the parameter db_name 'PROD1' exists in the control file and causing this error. The control file is under ASM.
    How can I change the parameter in the control file and bring the 'DEV1' cloned database up? Also, how can I avoid this issue next time I do a clone?
    Thanks in advance!
    Oracle 10g Release 2 on RHEL5
    Database cloning using RMAN Duplicate > ORA-01504: database name 'DEV1' does not match parameter db_name 'PROD1'
    ASMCMD> ls
    control01.ctl
    current.275.729098001
    archive log filename=/u001/dbsvr/dev1/1_131706_653848580.dbf recid=59 stamp=741953991
    media recovery complete, elapsed time: 00:09:31
    *Finished recover at 01-FEB-11*
    contents of Memory Script:
       shutdown clone;
       startup clone nomount ;
    executing Memory Script
    database dismounted
    Oracle instance shut down
    connected to auxiliary database (not started)
    Oracle instance started
    Total System Global Area     725614592 bytes
    Fixed Size                     2075592 bytes
    Variable Size                448791608 bytes
    Database Buffers             268435456 bytes
    Redo Buffers                   6311936 bytes
    sql statement: CREATE CONTROLFILE REUSE SET DATABASE "DEV1" RESETLOGS ARCHIVELOG
      MAXLOGFILES     50
      MAXLOGMEMBERS      5
      MAXDATAFILES      100
      MAXINSTANCES     1
      MAXLOGHISTORY     5445
    LOGFILE
      GROUP  1 '+DATA3/dev1/datafile/redo01.log' SIZE 100 M ,
      GROUP  2 '+DATA3/dev1/datafile/redo02.log' SIZE 100 M ,
      GROUP  3 '+DATA3/dev1/datafile/redo03.log' SIZE 100 M
    DATAFILE
      '+DATA3/dev1/datafile/system01.dbf'
    CHARACTER SET WE8ISO8859P1
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of Duplicate Db command at 02/01/2011 10:30:17
    RMAN-06136: ORACLE error from auxiliary database: ORA-01503: CREATE CONTROLFILE failed
    ORA-01504: database name 'DEV1' does not match parameter db_name 'PROD1'
    RMAN>
    RMAN> **end-of-file**
    RMAN>

    Respected, Sybrand Bakker -
    Thanks for constructive feedback!
    Here are the command that I ran.
    RMAN> connect target sys/<password>@PROD1
    connected to target database: PROD1 (DBID=556212836)
    RMAN> connect auxiliary sys/<password>
    connected to auxiliary database: DEV1 (not mounted)
    RMAN> @rman_dup.sql
    rman_dup.sql contains
    run {
        allocate auxiliary channel d1 type disk;
    set newname for datafile 1 to '+DATA3/dev/datafile/system01.dbf';
    set newname for datafile 2 to '+DATA3/dev/datafile/undotbs01.dbf';
    set newname for datafile 3 to '+DATA3/dev/datafile/cwmlite01.dbf';
    set newname for datafile 4 to '+DATA3/dev/datafile/drsys01.dbf';
    set newname for datafile 5 to '+DATA3/dev/datafile/example01.dbf';
    set newname for datafile 6 to '+DATA3/dev/datafile/indx01.dbf';
    set newname for datafile 7 to '+DATA3/dev/datafile/odm01.dbf';
    set newname for datafile 8 to '+DATA3/dev/datafile/tools01.dbf';
    set newname for datafile 9 to '+DATA3/dev/datafile/users01.dbf';
    set newname for datafile 10 to '+DATA3/dev/datafile/xdb01.dbf';
    set newname for datafile 11 to '+DATA3/dev/datafile/cons01.dbf';
    set newname for datafile 12 to '+DATA3/dev/datafile/survey01.dbf';
    set newname for datafile 13 to '+DATA3/dev/datafile/mem201.dbf';
    set newname for datafile 14 to '+DATA3/dev/datafile/cons02.dbf';
    set newname for datafile 15 to '+DATA3/dev/datafile/mem202.dbf';
    set newname for datafile 16 to '+DATA3/dev/datafile/cater01.dbf';
    set newname for datafile 17 to '+DATA3/dev/datafile/users02.dbf';
    set newname for datafile 18 to '+DATA3/dev/datafile/mar_data01.dbf';
    set newname for datafile 19 to '+DATA3/dev/datafile/sysaux01.dbf';
    set newname for datafile 20 to '+DATA3/dev/datafile/streams_tbs_01.dbf';
    set newname for datafile 21 to '+DATA3/dev/datafile/users03.dbf';
    set newname for tempfile 1 to '+DATA3/dev1/tempfile/temp01.dbf';
      duplicate target database to dev1
      until scn 48712532746
      logfile
       '+DATA3/dev1/datafile/redo01.log' size 100M,
       '+DATA3/dev1/datafile/redo02.log' size 100M,
       '+DATA3/dev1/datafile/redo03.log' size 100M;
    }Edited by: CipherDBA on Feb 3, 2011 10:50 AM

  • [Trend Micro Ios content filtering] parameter-type command under policy map not available

    Hi, all:
    I'm trying to configure TrendMicro IOS content filtering. I have this working on a separate box, running 15.1.
    On this particular testbed, I have a 2900 running:
    System image file is "flash0:c2900-universalk9-mz.SPA.152-3.T1.bin"
    And the following licensing:
    Technology Package License Information for Module:'c2900'
    Technology    Technology-package           Technology-package
                  Current       Type           Next reboot 
    ipbase        ipbasek9      Permanent      ipbasek9
    security      securityk9    Permanent      securityk9
    uc            uck9          Permanent      uck9
    data          datak9        Permanent      datak9
    Configuration register is 0x2102
    CUBE_GOLD_MEX#show ip trm subscription status
           Package Name:  Security & Productivity (Trial)
                 Status:  Active
    Status Update Time:  18:02:51 CST Mon Jul 23 2012
        Expiration-Date:  Mon Aug 20 02:00:00 2012
        Last Req Status:  Processed response successfully
    Last Req Sent Time:  18:02:51 CST Mon Jul 23 2012
    CUBE_GOLD_MEX#
    Also, I have the following config lines on it:
    ip host trps.trendmicro.com 216.104.8.100
    ip name-server 4.2.2.2
    ip cef
    multilink bundle-name authenticated
    parameter-map type urlfpolicy trend tm-pmap
    allow-mode on
    [snip]
    parameter-map type trend-global trend-glob-map
    class-map type inspect match-all http-imap
    match protocol http
    class-map type urlfilter trend match-any drop-category
    match url category Abortion
    match url category Activist-Groups
    match url category Adult-Mature-Content
    match url reputation ADWARE
    match url reputation DIALER
    match url reputation DISEASE-VECTOR
    match url reputation HACKING
    match url reputation PASSWORD-CRACKING-APPLICATIONS
    match url reputation PHISHING
    match url reputation POTENTIALLY-MALICIOUS-SOFTWARE
    match url reputation SPYWARE
    match url reputation VIRUS-ACCOMPLICE
    policy-map type inspect urlfilter trend-policy
    class type urlfilter trend drop-category
    I have not been able to get to the good part of configuring the ZBF.
    I've looked over several configuration examples and can't figure out what I'm doing wrong, since I'm not able to see the command 'parameter-map' under the 'policy-map urlfiltering'
    XXXXXX(config)#policy-map type inspect urlfilter trend-policy
    XXXXXX(config-pmap)#?
    Policy-map configuration commands:
      class        policy criteria
      description  Policy-Map description
      exit         Exit from policy-map configuration mode
      no           Negate or set default values of a command
    XXXXXX(config-pmap)#
    I thought it might be an issue with version 15.2.3, but according to configuration guides, commands are the same.
    Can anyone provide some assistance?
    TIA.
    c.

    Hi Carlos,
    I am having the same problem.  I have seen a few diffenent configuration examples and they all show adding the "parameter type urlfpolicy trend parm-map-name" command but it doesn't exist, at least in 15.2(3)T1 and I see it listed in the the IOS documentation for 15.2.  Maybe they forgot it :-)
    I guess I will open a TAC case as I do not want to downgrade...
    I will keep you posted if I find the answer.
    Regards,
    Troy

Maybe you are looking for

  • Music won't download on all my devices via iCloud. Help?

    Hi,  I have an iPad 2 and an iPhone 4 and I depend a lot of iCloud. I would be lost without it. One annoying thing that is happening is that when I purchase music on my iPhone, it won't download automatically on my iPad. And the other way around. If

  • Error in deploying from JDeveloper 10.1.3.1 to Oracle AS 10.1.3

    Hi! all. I'm getting an error while deploying my application from new JDeveloper10.1.3.1 to Oracle AS 10.1.3 It says: isActive()z Can anyone tell me where the error lies? The same application is getting deployed from 10.1.3.0.4 Should I have to add a

  • Load an external gallery  file into a host div via Ajax method?

    I was just wondering if anyone has been able to get a spry gallery to work when placed within an external html file and loaded into the host div of a page using Ajax method to load. It must work remotely (on the Internet). I've tried and mutilated en

  • Problem with my Lenovo A390

    How do I foward a message to a group. When I try to foward on all contacts is displayed but not groups that I have created under contacts.

  • Exporting to m2v using QT

    <Just purchased Qt Pro 7.1.5 with plug-in Mpeg 2 player and I can't seem to export my movies to m2v. Also, not able to export to m2v with FCP anymore. Used to be able to do so with QT Pro 6 but this version does not work with the Intel. Any ideas???