Does Flash Media Server work with Wirecast?

Does Flash Media Server work with the encoding software, Wirecast?
Do any of you have experience integrating the two? Good or bad ?
I'm currently using Red5, which doesn't work with Wirecast, but I'd like to be able to use Wirecast.
Any advice would be appreciated!
Best wishes.

Thanks again for your help on this!
I'm very new at this and don't really understand :
if you've enabled SWF verification on the FMS side, and made an exception for the FMLe user-agent,
I haven't done anything as far as setting other verifications, etc. This is just a default install of the FMS 3.5 Developers version.
But I have tried all 3 user agents, still, none can connect. I still keep getting the "Can't publish stream... check credentials/tokens" error message 4020.
Any other thoughts/ideas?
Best wishes.

Similar Messages

Does flash media server works with debian?

Can somebody tell me if there is a version of Flash media
server for Debian Linux?

Yep, just take the redHat version and modify the installer
script, use update-rc.d where redhat use chkconfig, that's it,
worked fine for me except the server crash once in a while with no
reason, no problems found in the log, still searching if it's my
server hardware or a software (fms) problem... but I didn't run the
adminserver and it's stable now...
Good Luck

Why does flash player not work with facebook?

Why does flash player not work with fcebook? Whenever I wish to view a video, I get the message that i need to upgrade my flash player. Then no matter how often I download and install flash player I still get the message that I need to upgrade my flash player. When I go check which version I have, I always get the message that I have the most current one. I run Mozilla Firefox with Windows. I don't know anything else.
Message was edited by: khettich

This means you don't have the latest version installed. Update to 11.9.900.117, and Firefox will allow it: Flash Player Plug-in (All other browsers)

Slow connection to flash media server 2 (with HTTP Tunneling)

Hello,
I use a FMS2 for a big project which include Instant
Messenger and
streaming video.
On my development platform. I have no problem. But in the
final
configuration, the connection to Flash Media Server takes a
lot of
time (about 2 or 3 minutes) and i can't find why.
FMS2 was installed on Windows 2003 Server behind a proxy and
a
firewall which only let the hostport 80 oppened.
The server does not run a web server (or anyother
application) which
use this hostport.
The connection are established by HTTP Tunneling.
Does someone already have the same problem?
Thanks for your answers and sorry for my poor english level.
Guillaume

I forgot to mention:
Flash Media server is running fine. I can log into the Admin
application no probs.
I created a folder called "test". Inside that folder I
created another one called streams and inside that folder I created
a folder called _definst_.
I placed an flv file called: test.flv in to the _definst_
folder.
In Dreamweaver CS3 I inserted a Flash Video File:
Chose Streaming as the option and for the RTMP path I put:
rtmp://ipaddressofserver/test/_definst_/test.flv
Called the stream....test.
When i run the page it loads, but the page is blank.
In the Flash Media Server, in the "View Applicationd" tab
I get the record of test and underneath it in the same link
it says test.flv with 1 client
The Streams tab shows a random name and Netstream.
This tells me its recognising the connection and link, but
the movie is not on the page
any help would be appreciated
cheers

Does Flash Media Server support MULTICAST?

I've been looking thru all the doc's but I can't seem to find
a single thing about whether Flash Media Server can actually
support multicast.

If by
multicast you mean each user can have an individual "stream"
that they can control independent of other users, then yes. HTH...

Flash media server working

Hello!
I am new to this server. I have installed the flash media
server2 but i could not run an application. I want the complete
procedure to make use of this server. If you can help me in this
regard plz help me as early as possible.
I want the complete procedure to run an application on client
side as well as on the server side.
thank you!

I've had enough responses now to realise that the server is
streaming beautifully - but only to my computer. It won't even work
from another computer on this network. I have checked that the
permissions on the Flash client are ok, and they seem to be. I
remember on my machine I had to followed some of the instructions
from
http://www.onyxservers.com/help/adobe_flash_video_streaming_guide.html
- see the part titled 'Troubleshooting Tip' - maybe my problem is
related to something like this - however the 'Troubleshooting Tip'
was for when the server was on the same machine - the problem I
have is with a real remote server.
It is almost like the Development version of fms is tied to
one machine! I don't know of any special relationship between my
the server and this desktop machine, except that this machine is
where the .flv files were created.
I have looked at the apache and tomcat log files - I can see
clients coming in and grabbing the .html and GETing the html and
swt files - but no errors. /var/log/messages doesn't have anything
but the server being started and stopped.
Also I have looked at all the log files in
/opt/adobe/fms/logs, but nothing looks like an error.
What can I do to diagnose this problem?
thanks - Chris

Does Flash Player only work with web content?

Thought I'd better start a new thread on this, as my previous
question has shifted emphasis.
Does the free Flash Player download only provide Flash
capability within the web browser? Or can it play local SWFs? If
not, do I need the whole Flash product to just play?

> Does the free Flash Player download only provide Flash
capability within
> the
> web browser? Or can it play local SWFs? If not, do I
need the whole Flash
> product to just play?
yes, yes, and no
YES: The player you download is the activex control and
Netscape plug-in
that browsers use .. not a separate program. So yes it is
effectively for
use in the browser only.
YES: You can fire local SWFs using it by opening them within
your browser.
It is only for web content.
NO: You do not need a stand-alone flash player (that comes
with the Flash
product) to view SWF content (local or on the web)
Jeckyl

Why does Flash Player not work with Firefox 16?

I am posting this question on behalf of wdanh, whose comment on Adobe Flash Professional FAQs was deleted.

what is the exact issue? flash content not loading or plugin not initializing or other? post platform information also. thanks...

Does Flash Media Live Encoder work with all the blackmagic-Design Decklink Studio?

Does Flash Media Live Encoder work with all the Blackmagic-Design Decklink Studio?

Well, I have my XH A1 Canon video camera hooked up to Shuttle Thundbolt as composite and the thunderbolt to my Macbook Pro (Late 2011 - 2.4GHz, i7, 16GB Ram) and FLM 3.2 does not see my camera.
When I hook my same camera up to my Windows i7, 2.8Ghz, 8GB Ram using my "Hauppauge capture card" as composite it can see my camera.
I'm going to try a simple VHS tape deck and see if my macbook pro can see it using the Shuttle Thunderbolt. I'm going to guess and say it won't.
I installed the drivers as well.
Evan

Linux issue with Flash Media Server 2

Greetings all,
We have just upgraded from Flash Communication Server 1.5 to
Flash Media Server 2, running on a server with Redhat Enterprise
Linux 4.
For some reason, a Flash movie that uses the old
MediaPlayBack component does not stream video of a FLV. It does
stream audio. On my testing server using Windows 2000 it functioned
fine.
On the other hand, the FLVPlayback component works nicely.
But I will have to go back and rewrite literally dozens of
applications that I wrote for Flash Comm 1.5 which used the
MediaPlaybackComponent, unless there is an easy fix for this.
I have documented this anomaly with a Captivate movie which
you can see at
http://breeze.stfrancis.edu:8900/mediaplayerwoes/.
It runs 2 minutes 13 seconds.
I BADLY need help with this. If you can help I would greatly
appreciate it.
Glen Gummess,
Instructional Designer
University of St. Francis
Joliet, IL

quote:
Originally posted by:
JayCharles
Yes.. you can.
But my old version of Flash MX show me an error message when
I try to open "CommunicationComponents.fla" which contain the
components of Flash Media Server 2.0.1.
My old version of Flash MX can't read this file and say
something like "Unexpected file format".

Integrating Flash Media Server with other formats

I would like to create a standard screen/player that can play
any of the following formats:
windows media files, all flash files, quick time files, real
player files.
So, for example, lets say I want to manipulate the screen to
be an exact aspect ratio and have the same skin, and exact same
controls as my flash files, but I don't want to work with Real
Server or a Windows Media Server to serve these files what is the
best approach to take ? i.e. a "Standardized" look and feel for all
the formats listed.
Where would I be able to get information that will help me
achieve this ?

There are two parts to this,
Flash Media Server application - both client and server side. Check out the video conference app here http://www.adobe.com/devnet/flashmediaserver/sample_apps.html.
The client side app will be a .swf file which you can develop in Flash/Flex.
Second, you will have to embed this swf file in your asp.net page that will be delivered to browsers. I am not an expert in asp.net but googled a bit and get a feeling it's possible using
tag.
Also don't forget to check this link http://renaun.com/blog/2006/10/28/139/ for video conferencing app using flex and FMS.

Domain issues with Flash Media Server

I have a webcam streaming to Flash Media Server via the Media
Encoder. I have published the .swf file with the flash player and
rtmp://99.999.999.999:1935/live/livestream address to my website on
a hosted webserver.
When I am on another internet source, the player on my
webpage loads and works fine. However when I load the webpage in a
browser on the same network that has the Media Server and Webcam on
it, the browser freezes up.
I need some help with a solution that will cause the rtmp://
address to switch to a local host address. Any suggestions.

quote:
Originally posted by:
JayCharles
Yes.. you can.
But my old version of Flash MX show me an error message when
I try to open "CommunicationComponents.fla" which contain the
components of Flash Media Server 2.0.1.
My old version of Flash MX can't read this file and say
something like "Unexpected file format".

Need help with Flash media server

I am using XAMPP. Now i want to intall Flash media server. How can i configure my apache server to work with flash media server? I dont want to install the apache server coming along with flash media

Hi,
What excactly is the usecase you are trying here? Are using your external Apache to proxy your http traffic from FMS to it or do you want to use http streaming feature of FMS?
If you want to proxy it then use the following document : http://help.adobe.com/en_US/FlashMediaServer/3.5_AdminGuide/WSE2A5A7B9-E118-496f-92F9-E295 038DB7DB.html
Refer Configure HTTP proxying topic in the document.

Live Streaming with flash media server

Hi,
i am installing flash media server 5.0. And its working perfect locally, I need to publish my video through my own IP address. How can i configure local to server

Thanks for the response
I m having Flash Media Server 4.5 . It works correctly in localhost. I want to make it online. I found a way, that place public ip address on the fms.ini file. I did it, but it does not work for me. How to fix this?

How to test streaming bandwidth on localhost with Flash Media Server ?

Hello,
I'm trying to debbug my code on Client side (Action Script 3) that works with Flash Media Server 4 on localhost. Everything seems fine up to that point.
However, when I'm trying to test my player with other remote streaming servers, I notice bugs because of lower bandwith transmission between the server and the player.
Is there a simple way to simulate lower bandwith with FMS4 on localhost (by config, application.xml, programmation...) ?
Thanks
Seb Ethier

Thank you zarihs Rawna
Indeed, i have been with Server-Side ActionScript (SSAS) way. it's more simple, i think.
Well, here the step what i did :
Step 1 :
Make a file "main.asc" et copy & paste the code below.
- more info : http://www.peachpit.com/articles/article.aspx?p=31217
      *main.asc*
    var bandwidth;
    application.allowDebug = true;
    // Application callback functions
    application.onConnect = function(client, user) {
        //12800 = 100 Kbps
        //64000 = 500 Kbps
        //131072 = 1Mbps
        //327680 = 2.5 Mbps
        //983040 = 7.5 Mbps
        //1966080 = 15 Mbps
        //3932160 = 30 Mbps
        //6553600 = 50 Mbps
        //15728640 = 120 Mbps
        bandwidth = 64000;
        client.setBandwidthLimit(bandwidth, bandwidth);
        trace("clientToServer = " + client.getBandwidthLimit(0) + " serverToClient="+ client.getBandwidthLimit(1));
        application.acceptConnection(client);
        trace("TEST");
Step 2 : Save the file under the folder underneath FMS's applications directory
Example : FMS\application\dyn
More info : http://www.flashcomguru.com/articles/fms2_basics.cfm
Step 3: Start the FMS server. If there is a problem, check the log file
Example : FMS\logs\_defaultVHost_\dyn\_definst_\application.00.log
Step 4 : (optional) Change the value of the variable bandwidth for your test. I put in comment some common internet connection speed converted in bytes.
That's all,
regards,
sethier

Does Flash Media Server work with Wirecast?

Similar Messages

Maybe you are looking for