Does FMLE 3.2 make use of the GPU?

Does FMLE 3.2 use GPU for encoding? Will it help if my hardware has a GPU or not?

Hey BaadB,
Could you give us a case number? I have posted your comments in the Lenovo thread but a case number will help me track down faster your call. I agree that what you experienced is not what we are striving for and that you the customer deserve better support.
I can not guarantee any resolution but I'll keep you updated if there is any change.
Best Regards,
Hiro
Did you find a post Awesome? A response just Outstanding? Kudo them!
Did the post you read answer your question? Did someone help you figure out your problem? Hit Solution Provided and give that person a pat on the back for helping you out!

Similar Messages

Does my modem need to support 5G in order to make use of the 5G characteristics of my AirPort Extreme?

Hi,
I have a Fritzbox 7360 router which does not support 5G. I have also bought an Airport Extreme and uses this in bridge modus. So the Fritzbox only serves as a modem. The modem does not support 5G however, do I need to have different type of modem in order to optimally make use of the 5G characteristics of the Airport Extreme?
Thanks

do I need to have different type of modem in order to optimally make use of the 5G characteristics of the Airport Extreme?
No

What versions of Xerces-J and Xalan-J does JDK 1.5 make use of

Can any one tell me what versions of Xerces-J and Xalan-J does JDK 1.5 make use of.

Hi all,
I have a class which has a Vector<Vector> data
member.
I expect its collection to contain more collections
hence the Vector<Vector> type.Everything is OK with your concept, except that you just declared a variable of type "Vector of Vectors". Instead, you need to declare it as "Vector of Vector of Objects":
private Vector<Vector<Object>> coll;and initialize it with
coll= new Vector<Vector<Object>>();

How do you make use of the 2nd Ethernet port on the Mac Pro?

My Mac Pro's ethernet port connects it to the local network and the internet.
Under what circumstances would I make use of the 2nd port?
Are there any settings I'd have to set up in system preferences to make sure one is used for some things while the other is used for different things?
I'm asking because we might be making some changes to our network. We have a printer with a Fiery RIP and I'm pretty much the only one who prints to it. I was wondering if we could/should set up a direct, dedicated connection so that network traffic won't bog down print jobs.

The main use for that port today is to create a subnetwork for Internet Sharing. Software inside the Mac can act as a Router and provides new DHCP Addresses for the subnetwork. In general, the devices on the subnetwork would be inaccessible from anywhere else, due to Network Address Translation.
If you are concerned about heavy network traffic, consider upgrading your Switches (not Routers) to Gigabit Ethernet speeds and using Jumbo frames. (Routers are not involved in peer-to-peer transfers such as Printing when no Address Translation is involved.)
If you have an Industrial Router, you can combine the two Ethernet ports into one composite link for faster-than-Gigabit effective speeds, but it requires a special Router not generally available.

How to make use of the presentation variable in SQL result query

I have 2 prompts in my dashboard.
Prompt1 decides the values of Prompt2.
I have set a presentation Variable (selected_comp) in prompt1 which holds the value selected.
To populate the values for Prompt2, I need to execute a query using the presenation variable set by Prompt1.
SELECT "List Of Values".RID from rocketv2_3 WHERE "List Of Values".NAME='COMPONENT' AND "List Of Values".VAL=@{selected_comp}
the query is resulting into
SQL Issued: SELECT "List Of Values".RID from rocketv2_3 WHERE "List Of Values".NAME='COMPONENT' AND "List Of Values".VAL=0
but the value in selected_comp is "ABC".
Can anybody help in how to make use of the presentation variable in query to get the correct value
thanks
Shubha

Just use constrain check box to filter your 2nd prompt values based on the 1st prompt.
Thanks,
Venkat
http://oraclebizint.wordpress.com

How to make use of the Legend from XY graph?

The hardware i am using will create a plot everytime i do a scan. I will upload the it result(plot) to another XY graph. I try to create a multi plot on the XY graph but it seems not working. I am wondering how can i make use of the legend that come with the XY graph to solve my problem.

Hi,
You should be able to plot as many XY arrays to the graph as you need. As long as you don't delete the previous plots they should remain there. This will make things much easier than dealing with 2 graphs.
There is an example at "C:\Program Files\National Instruments\CVI70\samples\userint\graphlegend.cws" that you can look at for an application with multiple plots.
I hope this helps.
Regards,
Juan Carlos

How to make use of the spare physical memory under buffered I/O of Essbase

We encountered an issue of the physical memory allocation of the server running Essbase with buffered I/O mode. We have implemented some cache setting in Essbase but still found that the disk I/O is quite high. Also we observed that Windows 2003 server cannot make use of the spare physical memory available as the system cache for database files of Essbase.
As allocating more memory as Essbase cache might not help, we would like to know other than changing to direct I/O mode, any other options can improve the disk I/O performance?
Thanks!

Sandeep Reddy wrote:
Hi Hyperion_User,
1. Disk IO performance,It mighe depend on quite a few things , one of the aspects might be your storage system. It can depend on the disk configuration too ( i.e if your disk is SAN or NAS, then it depends on the configuration like Raid ..etc).
2. It depends on the HBA ( host bus adapter).
3. Let me try to explain with diagram.
http://www.c-sharpcorner.com/uploadfile/freebookarticles/apress/2008dec16010208am/DataStorageDesign/Images/159059214X-1404.1.gif
4. It might depend on the HBA and even on the switch speed.
5. Buffered IO is a very generic setting,which most of them use( that should not be an issue).
6. Even if you have 30 to 40 GB free memory, every application in essbase has a limitation to it maximum usage ( 2 GB on windows ). Refer to DBAG for more information on this .
Sandeep Reddy Enti
HCC
http://hyperionconsultancy.com/
Thanks for your detailed advice. I just wonder if more physical memory can help to improve the disk I/O being used for concurrent read/write access. We are using Windows 2003 Enterprise Edition and not sure whether some spare physical memory can be used for this purpose.
Thanks again!

How to make use of the FM EDIT_TEXT_FORMAT_DOC

Hi frnz,
How to make use of the FM
EDIT_TEXT_FORMAT_DOC
Could anyone explain with an example how to use this
regards

hi
I need an example please....
did any one use that FM
Regards

Make use of the invoice form available in the correspondence.

Dear all,
I want to make use of the invoice smart forms available under the IMG in Corresspondence -->forms -->RE_CN_120. but i am not able to under how to assign this. scine i want to crete invoice for rent . please note that i am working on 4.7.Experst please suggest .
Regards.
Varaprasad

Hi Varaprasad,
creation of invoice is not available in R/3 4.7 set 2.0. This functionality had been introduced with ERP.
Please refer to this thread.
[Create Invoice for rent in 4.7;
Regards, Franz

I am running 10.5.8 and want to make use of the icloud changeover, I understand that I must first buy snow leopard 10.6 and then buy lion 10.7. Do I buy these as upgrades versions or full versions? I am not very techie, thanks for anya advice

I am running 10.5.8 and want to make use of the icloud changeover, I understand that I must first buy snow leopard 10.6 and then buy lion 10.7. Do I buy these as upgrade versions or full versions? I am not very techie, thanks for any advice.

A 10.5 era machine is better left on 10.6.8
I don't advise upgrading it to 10.7 as you'll have to buy all new versions of software for a older model machine, some are not ready yet and some of your third party driver software may not be available for your other hardware.
10.7 is slower and requires 4GB of RAM actually.
10.8 is being released this summer and it won't run on certain older graphic cards, so shortly you will be behind again.
Save your money for a new 10.8 machine. IMO
These rapid OS X upgrades are for those who like to be on the cutting edge and can afford to buy new hardware often, you didn't even upgrade to 10.6, so your not that sort of person obviously.
But you do need to upgrade to 10.6 for security issues and faster video. It will run your 10.5 Rosetta software, but 10.7 will not.
http://roaringapps.com/apps:table
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents

In illustratorCC2014, I tried to configure the use of the GPU of the new features. I have installed the java. I have a 3D set in navidia control panel. illustrator CC2014 will not start. I have not repaired even if you restored in navidia control pane

In illustratorCC2014, I tried to configure the use of the GPU of the new features.
I have installed the java.
I have a 3D set in navidia control panel.
illustrator CC2014 will not start.
I have not repaired even if you restored in navidia control panel.
I will add information here. HP Z400 Workstation, windous7Pro, NAVIDIA Quadro 2000, Intel Xeon CPU W3565 3.2GHZ

In illustratorCC2014, I tried to configure the use of the GPU of the new features.
I have installed the java.
I have a 3D set in navidia control panel.
illustrator CC2014 will not start.
I have not repaired even if you restored in navidia control panel.
I will add information here. HP Z400 Workstation, windous7Pro, NAVIDIA Quadro 2000, Intel Xeon CPU W3565 3.2GHZ

Does the Webkit engine make use of the browser cache when downloading images?

I am creating an application that downloads a lot of images. Its an HTML Javascript based AIR application. I can't seem to find any documentation that relates to how cacheing is handled. Is there a cache for the webkit browser?

Can you copy this to the Feature Request forum so we can vote on it please? http://feedback.photoshop.com/photoshop_family And then post the link here so we can find it. It'll get my vote.
There are a couple of others you might like to vote on too, such as using the embedded preview for editing down. http://feedback.photoshop.com/photoshop_family/topics/lightroom_capability_to_display_embe dded_preview
In terms of workarounds for now, if you haven't tried the 4.2RC yet, you might find the module switching a bit faster. And for better use of your exports processing power, try splitting your export into 3 or 4 and running them concurrently (i.e. set the first going, and immediately set the second going, etc.) as that'll make better use of the extra cores if your hard drives are able to keep up with them.

How to make use of the 'Groups' in Screen Layout?

Hi All,
I have a screen with 10 input fields (F1, F2, .. F10).
I set the 'Groups' attribute in the screen layout to 'DIS'.
How could I make use of this 'Groups' attribute so that when I loop the screen, I will only disable fields with the 'Groups' attribute set to 'DIS'? Thanks
I tried the following codes, but it's not working:
LOOP AT SCREEN.
    IF SCREEN-GROUPS IS NOT 'DIS'.
      SCREEN-INPUT = '1'.
      MODIFY SCREEN.
    ENDIF.
ENDLOOP.
It says ==> The data object 'SCREEN' does not have a component called 'GROUPS'.

In the Attributes of a screen field, there is an attribute called "Groups". This has 4 options for input (4 text boxes)
SCREEN has 4 fields GROUP1, GROUP2, GROUP3 and GROUP4.
The first text box under Groups attribute corresponds to SCREEN-GROUP1,
2nd text box for SCREEN-GROUP2
3rd text box for SCREEN-GROUP3
4th text box for SCREEN-GROUP4
Hope this helps.
Thanks,
Balaji

How to make use of the crypto modules in the new Sparc T2 processors?

Having just received some frontal indoctrination about the features of the new Niagara (T1/T2) processor platform, I've started to dig around its ncp cryptography support cores a bit, but I've got a few open ends that I hope someone here can tie up for me..
- Is there any way to make current OpenSSL take advantage of the ncp cores? The FAQs don't mention it anywhere except a general "Included ability to use crypto hardware options". Does this already include Sun ncp? The openssl derivate that comes with Solaris10 is antique and I really want to replace it.. but if that means losing hardware support, I'm considering ditching the T2 altogether and going for US4+, doing crypto in the "old" way on the main cpu cores.
- The Niagara crypto blueprint mentions some commands to run speed tests, which I did on a T2000 server I've got around here, and on an old 420 in parallel, and I got some results that puzzle me:
The T2000:
sign verify sign/s verify/s
dsa 512 bits 0.0001s 0.0001s 13025.0 11979.2
dsa 1024 bits 0.0001s 0.0001s 12835.7 12426.3
dsa 2048 bits 0.3030s 0.6135s 3.3 1.6
The 420:
sign verify sign/s verify/s
dsa 512 bits 0.001171s 0.001427s 853.8 700.7
dsa 1024 bits 0.003521s 0.004292s 284.0 233.0
dsa 2048 bits 0.011990s 0.014306s 83.4 69.9
The T2k looks nice for short keys, but does it really drop from 13k/sec to 1.6/sec for the 2kbit keys, or is that a display bug?
If not, does that mean that the ncp in the T1 cpu is limited to 1kbit keys, and if I intend to use longer DSA keys, I better stay doing it on normal CPU core?
I see the same huge performance drop in RSA when switching from 2048 to 4096 bit key sizes. Ok, RSA isn't really that popular anymore.. but even DSA-1024 is aged a bit and many crypto researchers recommend the 2kbit key sizes already, at least for applications that are supposed to be running for a few years.
Are there any improvements being made in the new T2 cpu series, compared to the T1 I ran the tests on?
- The T1/T2 brochure also lists functions like crc32, md5, sha1 hashing algorithms in the crypto cores - how can I make use of those? I've got a few applications that do heavy checksumming and file hashing, and I'd love to offload these operations to the crypto cores; however I couldn't yet find any tool that allows me to do that. The regular md5sum binaries coming with Solaris still do the math on the main cpu core.

I'd love to, but I don't have the money for a T2 system, and even if I did, I don't have the time to play with it right now anyways :(

How to make use of the XFList in the Function Bar of the XML Form Builder?

Hello:
    Now I am creating blog using the XML Form Builder.
    In the bolg publishing interface of the SDN ,there is a tpoics list ,in this list you can select single or multiples.
    I find the XFList in the Function Bar of the XML Form Builder.But I don't know how to make use of this list?Who can help me?
lexian
Thanks a lot!

In the Attributes of a screen field, there is an attribute called "Groups". This has 4 options for input (4 text boxes)
SCREEN has 4 fields GROUP1, GROUP2, GROUP3 and GROUP4.
The first text box under Groups attribute corresponds to SCREEN-GROUP1,
2nd text box for SCREEN-GROUP2
3rd text box for SCREEN-GROUP3
4th text box for SCREEN-GROUP4
Hope this helps.
Thanks,
Balaji

Does FMLE 3.2 make use of the GPU?

Similar Messages

Maybe you are looking for