Does G5 get hot after 1-2 hours of video playback?

Does the G5 get hot after 1-2 hours of video playback?
Should we be worried about putting skins or sleeves on them for protection?
Do they get hotter when sending output to TVs?

I noticed my 3g 20 Gb iPod ONLY gets hot when I reload all 20Gb of music on it. (i do this about once every year, to de-fragment all the files)

Similar Messages

Why my iPad get hot after 30min use?

Why my iPad get hot after 30min use?

The iPad should not get hot after 30 minutes of use. The new iPad will get warmer that the other two iPads did, but it should never get hot.
If you are playing a HD graphic intense game or watching a HD movie it will get warmer than it does when you are just surfing the web or doing basic functions in word processing apps, or writing emails a but it should still never get hot.
Is your iPad brand new or has this been going on for a while?

HT201317 All the photos dowloaded to the photo stream in my mac, will it be saved forever or does it get deleted after reaching 1000 limit ?

All the photos dowloaded to the photo stream in my mac, will it be saved forever or does it get deleted after reaching 1000 limit ?

Photo stream photos will be deleted once you reach 1,000 unless you import them into iPhoto. You can set your iPhoto preferences to import them automatically.

Why my macbook pro getting hot after using it 10 mins

in these days, i fond my new macbook pro would get hot after using it 10 mins

Hi kifan lin,
If you have concerns about the temperature of your MacBook Pro, you may find the following article helpful:
Mac notebooks: Operating temperature
http://support.apple.com/kb/HT1778
Regards,
- Brenden

9 hours of video playback using this

anyone use this?
http://www.tekkeon.com/site/products-mypower.php

The orignal 30GB Video iPod had a video playback of 2hrs with the brigthness at max. The orignal 30GB Video iPod can get an additional 3hrs of video playback a total of 5hrs when the brightness is completely dimmed. To completely dim the backlight during video isn't great because its pretty dark. So I suggest you dim to 1/4 brightness and you will most likely get between 3.5 to 4hrs of video playback. Right now I'm testing how much battery life I would get with the backlight dim to 1/4 brightness and so the results coming out great I played a 2hr 40min movie with 1/4 battery life left. I'm hoping I get an additional hour.
The new 30GB iPod has a 3.5hrs of video playback with the brightness at max. So the new 30GB Video iPod gets an ugrade of 1.5hrs of video playback, that can probably go up to 6.5hrs of video playback with the brightness completely dimmed.
I did this test to ease the pain of those who just bought the orignal 30GB iPod and then find out days later that Apple to released an upgrade 30GB Video iPod. So if you want extra video playback just dim the brightness on the backlight halfway and you will get around 3.5hrs of video playback instead 2hrs.

Is it normal for iPad to get hot after 30 min usage?

Hi,
well after thirty minutes or so my iPad 1 starts getting hot and temperatures continue to increase ..
This also happens while charging.
I just wanted to know if this is normal ..

My iPad (1st Gen) does get a little warm to but not 'hot', even after more than an hour of usage.
Are you using it outdoor in direct sunlight or in a 'hot' closed environment/room?
Having aluminium/metal casing, it might radiates heat more readily than plastic/glass coverings when subject to warmer than normal ambient temperature.
Otherwise, if it is still under warranty (or AppleCare) I would suggest making appointment with the Genius Bar at an Apple Store. It might be a faulty product.

E4200 - Gets hot after prolonged use

Pros: Nice looking. Can turn the back port lights off (but can't turn the glowing white Cisco light off).
Cons: Gets hot (to me) after prolonged use, so I have a side propped up on a coaster pending buying some padded feet for it. Web interface slower to load than expected.
Using with my Dell XPS M1530 with Intel 4965AGN wireless card. Foot away from my router I get about 12MB/sec (about 100mbps). Only saving grace is the range appears to be excellent in my 2000 sq ft townhouse. Router is in one corner 2nd-floor bedroom, and even at the furthest point away in my basement I get about 6 MB/s (about 50 Mbps).
Other Thoughts: Used to stream ISO rips of my legally purchased DVDs & Blu-Rays from my home server to my TVs. DVDs require about 1 MB/s to play without hiccups, which this does fine, but the blu-rays require 5-6 MB/s which this unit can do about 90% of the time. Maybe it's just my approximately 4-year old laptop wireless that can't handle the new speeds?

Did you try changing any settings like the wireless channel manually? Also, if you haven’t already done so, you could try a firmware update. Lots of the initial kinks are usually ironed out with a firmware update.

Guys my i pod touch 32gigs generally gets hot after sum time of playing games or using sum app.. is dis normal ??? ne suggestions ???

is this getting hot bussiness normal or its sumthin i should luk into ??

as i say yesturday its normal
like a computer more you rush it more it became hot
i ave nothing more to say IIIaass ave said everything

Why does my music pause after about an hour

Hi all. I am having trouble with my 7th gen ipod nano. After about an hour or so of listening to music, the device will pause on its on. I have to fully charge it again to solve the issue. If I do not fully charge it, I have to press and hold the ear buds into the jack to fix the problem. Oh and I am not using the original head phones. There seems to be a shortage of some sort. Please help.

Hey Shamika,
If you are having an issue with your iPod nano stopping play of music after one hour and being unable to resume normally, I would suggest that you first attemtp to reset the iPod. See this article for directions -
Reset your iPod - Apple Support
Specifically -
7th generation: Press and hold both the Sleep/Wake button and the Home button until the screen goes dark. The Apple logo should appear after a few seconds, then the Home screen should appear.
If the issue is not resolved, you may need to restore your iPod to factory settings. Use the steps in this article -
Restoring iPod to factory settings - Apple Support
Thanks for using Apple Support Communities.
Happy computing,
Brett L

Macbookpro i7 2011 restarts when it gets hot after playing games?

Everytime i try play Starcraft 2, my macbook will display a grey restart message after a few games and i end up getting an error after i restart my laptop. i just got my laptop 2 weeks ago and is finding this incredibly anoyying. does it always restart everytime the laptop gets too hot??

You bought a new machine that has a new operating system 10.7 and the third party program is tailored for the previous OS X version of 10.6
Try to find out if there is a update for 10.7 for your third party programs.
Right now all you can do is apply Software Update under the Apple menu for OS X and wait for updates, contact the developer when they expect a update.
If your experiencing shutdowns with other high CPU/GPU programs, it could be something wrong with the machine itself.
Perform a HardWare Test you may have a dead sensor or fan.
Install iStat and monitor your machine for unusal behaivor, post your results here for comparison with others.
Hail Mary list
1: SMC reset
https://support.apple.com/kb/HT3964
2: PRAM reset
http://docs.info.apple.com/article.html?path=Mac/10.6/en/26871.html
3: HardWare Test
https://support.apple.com/kb/HT1509
4: Re-apply Firmware via CD (only works if it failed to install)
A failed firmware install the computer boots to a grey screen with a progress bar that stops
https://support.apple.com/kb/HT2213
Consult this page here to get the correct firmware for your machine
https://support.apple.com/kb/HT1237
5: If you boot to a grey screen, flashing folder, spinning gear etc
(flashing folder fix: try hold option while booting, select your boot drive, then set as Startup in System Preferences)
https://support.apple.com/kb/TS2570
6: If you have "you need to restart" kernel panic
https://support.apple.com/kb/TS3742
Boot the computer holding the Shift Key down for "Safe mode" this disables third party kernel extension files (.kext) that load upon boot. Look in your system/library/extensions folder for names of kexts files that correspond to any of your third party software and/or simply check for updates for all your software. If none, consult the developer which kext files to remove out of the folder.
If you have perhaps bad RAM, test using Rember extended overnight.
Clean your OSX install disk's bottom with a bit of rubbing alcohol on a very soft cloth and polish.
If you need another OS X Snow Leopard grey disk without possible imperfections, call Apple with your Serial number (under the Apple Menu>About this Mac> more info)
Firewire Target Disk Mode can get your files off the machine if it works and you have another Mac.
https://support.apple.com/kb/ht1661
For more trouble shooting and backup, restore and performance read here, including correctly formatting a external drive, and making a data rescue drive to boot the computer from and grab your files off the machine, reinstalling OS X in various ways etc. Pondini's TimeMachine page etc.
https://discussions.apple.com/message/16276201#16276201

Memory does not get released after encrypting/ decrypting files.

I am using javax.crypto package to encypt/decrypt files but the problem is that once a big file (around 100- 700 mb) is encrypted there is spike in memory of 70 Mb (first time) and whole of this memory is not released after execution is finished. I have kept my application run for days but this memory do not come down.
Interesting thing is if I encrpyt/ decrypt the same file again and again the memory do not rise by 70 Mb, but for first 3-4 iterations 5-8 Mb of memory is released in each iteration and after that memory starts increasing again in chunk of 2-5 Mb and after few iteration some memory get released but in all the memory always increases. The code to encrypt file is simple
Cipher c = Cipher.getInstance("AES/CBC/PKCS5Padding");
byte[] salt = generateRandomBytes(16);
Rfc2898DeriveBytes rfc = new Rfc2898DeriveBytes("123456", salt, 1000);
SecretKey key = new SecretKeySpec(rfc.getBytes(32), "AES");
c.init(Cipher.ENCRYPT_MODE, key );
FileOutputStream fos = new FileOutputStream(encryptedFile);
CipherOutputStream cos = new CipherOutputStream(fos);
FileInputStream fis = new FileInputStream(largeInputFile);
int len = 0;
byte[] buf = new byte[1024 * 128];
while((len = fis.read(buf)) != -1) {
cos.write(buf, 0, len);
cos.close();
fis.close();
This is simple observation I have seen in my program:
I am using Windows 7 64 bit with 16 GB RAM Intel Core 2 Duo 3.00 GHz and file encrypted was 700 MB size
Explanation
Memory Usage (As shown in Windows Task Manager Private Working Set column)
When program starts
9924 K
After first iteration of encryption
81,180 K
Second Iteration
78,254 K
3 Iteration
74,614 K
4 Iteration
69,523 K
5 Iteration
72,256 K
6 Iteration
70,152 K
7 Iteration
83,327 K
8 Iteration
85,613 K
9 Iteration
95,124 K
10 Iteration
92,698 K
11 Iteration
94,670 K
I kept the iteration on for 2000 iteration, the same pattern was observed and at the end memory usage 184,951 K, this memory was not released after calling System.gc() also.
What could be the possible problem, is it the CipherOutputStream or Cipher class having some memory leak or I am doing something wrong here?

ash wrote:
We are using WebLogic Server 7.0 runing on Solaris 2.7.
We are experiencing a problem where the memory does not seem to be released after
the application has been shut down.What do you mean by "application has been shut down"? Is the server
process running or not? Is it a zombie?
The
Unix 'top' command reports that memory has not been reclaimed by the O/S. What exactly has it reported? If the process is gone, then I'm pretty
sure your O/S has reclaimed the memory. What exactly are you looking at
in top?
-- Rob
> Continue
restarting it will forces us to reboot the server as there will be more and more
memory lost when restarting the WebLogic.
Advice to fix the problem is much appreciated. Thanks.

Iphone 5 getting hot after water damage

Hi my Iphone 5 was put in water and now it is hot and has an error message..what does this mean?

it is dead
water and electronics do not get on think electric fire in a bath
You can obtain an out of warranty exchange unit at an Apple Store genius bar for $229

IPhone 3GS getting hot after adding hotmail active sync

After adding 2 of my hotmail account as Microsoft exchange accounts using active sync, I have noticed that my iphone 3GS is getting extremely hot. I already have gmail through exchange for more than a year now for contacts and calendar. This heating problem started after adding these 2 hotmail accounts. Anyone else experiencing the same issue. Please help.

HI,
Try resetting your iPhone. From the Home screen choose Settings > General > Reset > Reset All Settings. All your preferences are reset, but no data or media is deleted.
See if that makes a difference.
Information here: Keeping the original iPhone within acceptable temperatures
Carolyn

IChat does not receive messages after a few hours

I always leave my computer on at night since I often get chats from overseas that I don't want to miss. Ever since I have started using iChat 5, these messages never arrive at my computer anymore. I am also using it in conjunction with AIM on the iPhone. Could that be causing the problems? Ususally the chats arrive on both iPhone and Mac.

Hi,
Welcome to the  Discussions
This can be a case of sorting out whether the computer Sleeps,
Whether it is receiving Off Line IMs,
and How your Forwarding was set up.
Use this page to Login to AIM
https://settings.aim.com/
Once you do that it should return to this page but will have your Name on it.
At that point you can check the Off Line IM status.
If you computer sleeps then ichat may well start faster than the computer reconnects to your LAN - in which case iChat does not login again.
This may mean it is "Missing" IMs when technically iChat is Off line.
I have never set up forwarding but you might have to check device order priorities. If the Phone is Off does it default to the computer ?
Is it supposed to be gong to Both ?
On that Settings page they call it Mobile (rather than Forwarding).
Hope this give you some ideas about where to look.
10:52 PM Saturday; April 9, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

Cube does not get refreshed after maitainence

Hi
I have a cube in a schema that was existing.
I have added new data to the fact table that is mapped to the cube.
I maintained the cube by using the complete refresh option in the analytical workspace manager.
After maintaining the cube and selecting from the cube view I do not see the new data that I have added.
I have even tried dropping and recreating the cube but still it does not work.
I have also tried adding the clean step for all measures and yet it does not work.
Creating the cube with a different view name is a solution but that is not what I want. I want to be able to refresh the same view.
Please advise / suggest
Edited by: CelestialCitizen on Sep 4, 2011 9:53 PM

Hi All
The above is a false alarm.
Basically it turned out that one of the keys in the fact table was not a leaf node in the dimension.
After rectifying that all works fine now.

Does G5 get hot after 1-2 hours of video playback?

Similar Messages

Maybe you are looking for