Does GemPC Twin card reader compatible with OCF?

Hi!
Does anyone know if GemPC Twin card reader is compatible with OCF? And if it is compatible what should i write in opencard.properties file to configure this card reader???

small adition i'm talking about pure java access to ocf, not pc/sc

Similar Messages

Does lightning SD card reader work with iPad Mini and iOS7?

I order new iPad Mini Retina and wan to know;
does the lightning SD card read works with iOS7?

Yes.

Looking for a smart card reader compatible with Mac OS X 10.5

Hi there,
I am looking for a smart card (card with microCPU) reader which is compatible with Mac OS X 10.5 .
In substance, what I need is a little space to store all my passwords in, due to the fact that I might forget one: I have many to remember!
I have an USB key, but I use it in many computers, even in ones whose security cannot be 100% trusted.. and I want no doubt when talking about safety.
Here's an image of what I want in poor words:
http://www.ordnas.it/prodotti/lett_mem/imgpr1592-01-3.jpg
The main issue is that most SC readers are /not/ Mac compatible.
So what brand should I opt for ? What costs should I expect ?
Thank to everyone who'll help.
Tyrexionibus

Thank you for your answer.
This might be a solution, I'll take it seriously.
Can this other be a solution too ?
http://www.athena-scs.com/product.asp?pid=1
On the manufacturer's page, it's stated that it's compatible with Mac OS X.
41 bucks + shipping + the price of a smart card..

Does Bo 5.1.7 compatible with Windows 7

Hi All,
Does BO 5.1.7 compatible with Windows 7?
Thanks in Advance,
Karthik Namburu

Hello...,
BO5.1.7version best suitable environment is Windows NT. You willn't get any problems in it.
In Windows XP also it will work, but not perfectly suitable.
So it is better to choose Windows NT.
All the Best,
Madhavi.

Does Supervisor Engine 6L-E compatible with Cisco Ws-C4506 Non-E switch?

Does Supervisor Engine 6L-E compatible with Cisco Ws-C4506 Non-E switch?

Yes, it is compatible with non-e chassis.
see below:
The Cisco Catalyst 4500 Supervisor Engine 6L-E is also compatible with classic Cisco Catalyst 4500 line cards, chassis (3-, 6-, and 7-slot), and power supplies, providing full investment protection.
link to data sheet:
http://www.cisco.com/c/en/us/products/collateral/switches/catalyst-4500-series-switches/data_sheet_c78-530856.html
HTH

Is the Audigy SE cound card fully compatible with Windows Vista

Hi, all. Is the Audigy SE sound card fully compatible with Windows Vista? I see conflicting posts about this issue. TIA. --
Bob
Website: http://www.Property-Aid.com
E-mail: [email protected]?Exchange ideas and investing tools at our Real Estate Mastermind Group on Yahoo Groups:
http://preview.tinyurl.com/ypue7o

Thank you, Mr. Dude. I just posted this question there and look forward to seeing the reply. I appreciate your help. --
Bob
Website: http://www.Property-Aid.com
E-mail: [email protected]?Exchange ideas and investing tools at our Real Estate Mastermind Group on Yahoo Groups:
http://preview.tinyurl.com/ypue7o

Is a PCI-488.2-1M card backwards compatible with the 488-1975 standard?

Is a PCI-488.2-1M card backwards compatible with the 488-1975 standard?

IEEE 488-1975 is one of the early revisions of the IEEE 488.1 stardard, other revisions include 488-1978 and 488.1-1987.
Because the original IEEE 488 document contained no guidelines for preferred syntax and format conventions, work continued on the specification to enhance system compatibility and configurability among test systems. This work resulted in a supplement standard, IEEE 488.2.
So, both 488.1 and 488.2 support 488-1975
I checked the link and it is fine, make sure you have the right web browser settings.
http://sine.ni.com/apps/we/nioc.vp?cid=1233〈=US

Does adobe frutiger standard family compatible with Microsoft office

does adobe frutiger standard family compatible with Microsoft office?

The OpenType CFF version of Frutiger is compatible with Microsoft Office.
Beginning with Microsoft Office 2013 / Office 365, Microsoft Office is not compatible with any Type 1 fonts previously licensed by Adobe or anyone else (including Frutiger); that was Microsoft's decision folks!
- Dov

Just bought a Macbook Air. I does not appear to be compatible with my LCD projector. What LCD projectors work best with MacBook Air?

My Cannon LCD LV-7210 projector does not recognize my Macbook Air nor does my Macbook Air recognize it is attached to an LCD projector. Yes, I do have the proper adapter.
What LCD projectors work best with Macbook Air? Does this LCD projector have auto-detect for computer?
Thanks!

I've just purchased a *27in (aluminium case) LCD Cinema Display* and am using it with my MacBook Pro, linked by the supplied three-jack cable (Mini DVI display jack).
The 27" display uses Mini DisplayPort, not Mini DVI.
But I also have *a white-cased MacBook (purchased in 2008) which has an older type of display socket*, certainly not compatible with the Mini DVI type.
The early Mac Book uses Mini DVI.
1. Is there a cable or adaptor available to link my older MacBook to the Cinema Display? Nothing in the online store looks 'right'
No. Mini DVI is single-link, and does not support the resolution needed for the 27" display.

Bridge in CS5 does not recognize card reader

Help! Suddenly, my Bridge in Photoshop CS5 does not recognize my card reader. I have a HP Pavilion Elite HPE that has the card readers (for 15 different cards) built into it and all of a sudden it will not recognize the card reader drive. I have uninstalled CS5 and re-installed it thinking that if the path had been broken that it would be reestablished by the reinstallation, but that did not happen. I have checked the device manager on my HP and it tells tme that this drive is working correctly, but however, it is not evidently working correctly. Has anyone else had this happen to them and if so, what was the solution? I have an e-mail to HP for tech support, but have not heard from them as of yet. Thank you in advance for your input.

You want to at least choose the 1st, reset preferences.
Purging the cache can solve some problems, it will be rebuilt as you visit each folder.
Resetting Workspaces is probably not necessary unless you have display problems.
To view the files in Win. Exp. you have to open then navigate to the device where the card is being read.
If you can view the card in W Exp then the card works, and you can get photos in Bridge with File/get photos from camera.
If you do not get the auto load window when you stick the card in you will have to look at the autoload optons in the Op. Sys. Look in Help file for info. on where to look.

AirPort Extreme card not compatible with Mac Pro???

Hey,
I recently purchased my Mac Pro without thinking to include any hardware for connecting to a wireless network.
I have recently moved into a new apartment which I am keen to join to a wireless network which has just been set up by my roommate for his PC and Laptop.
I was going to buy an AirPort Extreme card, but I have read that it is not compatible with the Mac Pro. Yet when I looked at the configure process for a new mac it was listed as one of the devises offered for wireless networking!!
I am very confused...
I was wondering if anyone could help me, i just need to know what hardware i will need and how it would be installed.
thanks, all help will be greatly appreciated!
Mac Pro Mac OS X (10.4.8)

the mac pro takes a slightly different airport express card. you have to purchase it at the retail store and have them install it. in my experience they will not allow you to purchase one and install it yourself due to the difficulty of installing it. best thing to do take your macpro into a apple retail store and see what they can do.

Sound Card not compatible with WIN 7

I have a Dell 8200 Dimension Desktop (vintage 2002)?that I?ve just upgraded from XP Pro to Win 7. My Turtle Beach sound card no longer works since it is not compatible with Win 7. When I tried to install a non-Dell sound card, I found that the two sockets were not compatible with the Dell cables. I was told that I must have a Dell card since the plugs were proprietory Dell. I was given a Dell part number (38FRH) which supposedly was the card that would work as a replacement, i.e., be compatible with Windows 7. Dell no longer stocks this card since they stop supporting their computers after they are 5 years old.
Can?anyone help me solve my problem?

Which Dell cables? To the speakers? If so, time to change the speakers then.
Also try online such as eBay. Google for "Dell 38FRH". Ignore the Windows 7 drivers links. First few I found were fakes/scams. Scroll down. On the first page there were a couple of sites that carried it.
I would rather change the sound card [get something "modern"] and speakers than continue to use proprietary stuff.
Using Win 7 on an 8 year old system? Yeeesh.

Why does a smart card reader kill MacOS?

I need a smart card within a virtual machine on my Mac. The trouble is, every time I connect the reader, my MacOS stops working properly.
When the smart card reader is connected before the Mac is turned on, then I can't login: After entering the password, it hangs with the spinning color icon.
I can boot without the reader, though. If the reader is plugged in after boot, this happens:
Safari doesn't start up, all I see is the color spinner. Finder gets blocked as well while Safari is trying to start up (i.e. forever)
If I have a Terminal open, then I can "kill -9" the Safari process, which unblocks the Finder.
When I then try to shut down, it hangs with a white screen, and never properly finishes until power off.
How can I debug or solve this problem?
Thanks! Martin

It's a very common device (Omnikey 3121), which should be compatible. Nevertheless, I installed drivers from the manufactor's site to see if they make any difference. On reboot after driver installation I got a kernel panic within the HID drivers. Very strange.
Kernel Extensions in backtrace:
com.apple.iokit.IOHIDFamily(2.0)[994495B5-FB34-3DB5-B47A-D2A732E52F33]@0xffffff 7f811c1000->0xffffff7f81232fff
dependency: com.apple.driver.AppleFDEKeyStore(28.30)[2A8A5F6B-0A7C-33A0-8E5B-4C10F646EC4F]@ 0xffffff7f811b6000
After reboot it seems to work fine, but I'll have to check some more.

X220 SDHC/SDXC card reader--speed with UHS-1

The X220multimedia card reader in the x220 works on the PCI bus and can read SDXC cards. I have seen comments here that it reads the UHS-1 cards. Can it make full use of the read/write speeds of the latest cards,such as the SanDisk Extreme Pro? Also, does it matter whether NTSF or exFAT is used when the card is used as a backup device, not intended for use in a camera? What are the advantages/disadvantages of using SDHC/SDXC cards for backup?

Hi i have found a solutions in this post and now work for me:
https://discussions.apple.com/thread/3275447?start=45&tstart=0
"I have just got a 4GB sandisk micro sdhc card with adaptor, tryed it in my macbook pro retnia it did not work and tryed it in a 2 year old mac book no joy, i have been reading all the forums with no luck.
Went back to my macbook pro retnia put the card in and out a few times with no luck put it back in and moved it from side to side a few times bingo it worked, every time i insert it i have to move it from side to side to get it to work, i am using mountain lion 10.8.2"
Bye
Daniele aka DunDiDu

W500 card reader problems- with a wrinkle??

My card reader won't recognize SDHC cards. I have a W500 (4061-BL2) running Win XP Pro, Service Pack 3. I installed the latest drivers for the 4-in-1 reader (Ricoh Multi Card Reader driver 3.64.02 which does show up in the "Add/Remove Programs" listing). Based on reading this forum, I considered KB934428, but, when I tried to install the hotfix, I learned it is not needed with SP3. (I didn't try to install KB923293 which is the other hotfix frequently mentioned for this problem as it appears to be older than the ...428 hotfix??)
Everything appears to be normal in Device Manager.
When I try to insert a Kingston 8GB SDHC card (that I know has pictures on it as I can see the pictures on my Canon camera), my system does recognize the card (under "My Computer", it shows up as "SD/MMC (E", but, when I try to access the card, it only says "The disk is not formatted.. Do you want to format now?".
I know there are 20 other forum posts on this problem, but, mine appears to be somewhat unique with XP SP3.
Like everyone else with this problem, I can read the card just fine with a USB card reader.
Any help will be deeply appreciated! Love the W500 except for this nagging problem as I am really anxious to use the card reader.

I just fixed a co-workers Ricoh 4-in-1 reader by following these instructions
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-70881
It says it's for R61 but worked on W500.
Running Windows XP Pro SP2. I tried the Lenovo Drivers but they didn't work.

Does GemPC Twin card reader compatible with OCF?

Similar Messages

Maybe you are looking for